PROVISIONING OF PARKING FACILITY- STAGE II AS PART OF INFRASTRUCTURE AUGMENTATION NAP PHASE II AND ADDITION ALTERATION AND SPECIAL REPAIRS OF CADETS BATHROOM AT KATARI CADETS MESS P-53 BUILDING AT INA EZHIMALA

Amount

Excavating over areas, n. exc. 1.5m wide and n. exc 1.5m in depth for foundation etc getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated material exc. 50m and n exc 250 m & depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M&L for cement concrete in foundations, filling and mass concrete using PCC 1:4:8 type D2 (40mm graded aggregate) complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete type B1 1:2:4 (20mm graded aggregate) in CM 1:6 complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of stone surfaces finished even and smooth without using extra cement in external surfaces complete all as specified and as directed.

M&L for providing cement concrete type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5m clear span,copings, cills, steps, seismic and other similar bands complete all as specified and as directed.

M&L for hardcore of gauge exc 63mm but not exc 100mm deposited, spread and levelled in layers n. exc 15cm thick, watered and rolled/rammed to a true surface (broken stone or boulder) complete all as specified and as directed.

M&L for PCC type D-2, 1:4:8 75 mm thick in subbase complete all as specified and as directed.

M&L for cement concrete type B-1,1:2:4 (20mm graded aggregate ) 100 mm thick in flooring including brooming complete all as specified and as directed.

M&L for forming contraction (dummy) joints 100 mm deep x 10mm wide, filled with sealing compound Grade A incl cutting grooves using diamond cutter complete all as specified and as directed.

M&L for pre polished/ lacquer finish machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L for 30 mm thick sand cushioning under floors including watering and consolidation complete all as specified and as directed.

M&L for steel work in tubular trusses/columns/rafters/purlins in any shape/design flat or curved section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel flat / curved sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F of W beam crash barriers single sided single W beam with width of each beam 312 mm and depth of corrugation 83 mm and made up of 3 mm thick galvanised sheet. The posts/ spacers of the W beam crash barrier shall be made of 5 mm thick galavnized channel section 150 mm x 75 mm. The fixing of W beam and spacers on posts shall be done with 16 mm dia Galvanised nut and bolts, the end section shall be terminated with fish tail section.The entire W beam crash barrier system should adhere with the MORTH specification. The fixing of posts, spacer and W beam shall be strictly as per manufacturers inctructions. The quoted rates shall be inclusive of excavation for post holes, fixing of posts at directed depth, filling of PCC, fixing of bed plate, welding, fastening, riveting, bolting etc all required as per the installation procedure given by the manufacturer, (nothing extra is payable on this account) complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demoltion of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down chowkats or frames n.exc. 1.5 Sqm each but without taking off shutters from the frames complete all as specified and as directed.

Taking up or down steel tubing and connections, 15mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm dia complete all as specified and as directed.

Taking up or down cast iron waste and vent pipes of 100 mm dia complete all as specified and as directed.

S&F 30 mm thick factory made door shutter to be made with unsaturated polyster resin moulded to 3 mm FRP laminate for forming hollow rails and styles suitable treated and seasoned rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels with gel coat finish and with an average weight of 8 kg per sqm complete all as specified and as directed.

S&F fibre glass reinforced plastic (FRP) door frame of 100mm x 60 mm thick are to be laminated with inner core of treatment and outer core of average 2 mm thick FRP with gel coat finish weighining an average of 4 kgs per mtr complete all as specified and as directed.

S&F 100mm mild steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S&F 150mm aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed.

S&F 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

M&L for coloured Non-skid ceramic tiles 600x 600x7 to 8 mm thick fixed on floors with approved tile adhesive & provided with 4mm spacer, spacer gaps to be filled with approved epoxy complete all as specified and as directed by Engineer- in- Charge.

M&L for glazed ceramic coloured tiles in vertical surfaces 600x300x7 to 8 mm thick , fixed on walls with approved tile adhesive & provided with 4mm spacer , spacer gaps to be filled with approved epoxy complete all as specified and as directed by Engineer- in- Charge.

M&L machine cut granite stone slab 20mm thick of approved colour and shade as in steps, jambs, pillars, window- cills, cooking platforms,WHB platform and like over and including 20 mm thick screed bed in CM 1:4; laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and as directed. Note:- The quoted rates shall be inclusive of cutting holes in any size and number, rounding edges etc whatever needed to facilitate the fixing of fittings and fixtures on granite slab. The hole portion will not be deducted from measurement and payment.

M&L for Precast RCC 1:2:4, type B-1 (using 20 mm graded stone agg) in slabs , landings, and in shelves and the like set in CM 1:6 complete all as specified and as directed.

M&L for mild steel TMT bars 8 mm dia bar cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fix in repair vitreous china wash basin counter sunk type oval shape, star white including waste coupling chromium plated, fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed. Make :- Hindware Cat No. 10049 or equivalent in Parryware/Cera.

Supply and fix in repair vitreous china, wash down water closet (EWC) starwhite with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed. Make: HINDWARE Cat. No 20079 or equivalent in Parryware/ Cera.

S&F in repair vitreous China Urinal, half stall type, with and including waste coupling CP of 40 mm and all fixing accessories complete all as specified and as directed.

S&F in repair vitreous China Urinal partition, with and including all fixing accessories complete all as specified and as directed.

S&F pillar taps 15 mm size, brass chromium plated swan neck type screwed down high pressure screwed for iron pipe & fixed complete all as specified and as directed. Make:- Jaquar Model No CON-CHR-127BKN or equivalent as approved by GE.

S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs bib tap 15 mm size, brass chromium plated rust proof complete all as specified and as directed. Make:- Jaquar Model No COS - 103037 or equivalent as approved by GE.

Supply and fix in repairs 15 mm dia angular stop valve, brass chromium plated complete all as specified and as directed. Make :- Jaquar Model No FLR - CHR-5053 N or equivalent as approved by GE.

S&F in repair Urinal spreader of brass chromium plated fancy type suitable for 15 mm bore pipe complete all as specified and as directed. Make:- Cera Model No F8070201 or equivalent as approved by GE.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair stainless steel towel rail 60cm long complete all as specified and as directed. Make:- Jaquar Model No ACN-CHR-1111SM or equivalent as approved by GE.

S&F in repair chromium plated towel ring round with round flange complete all as specified and as directed. Make:- Jaquar Model No ACN-CHR-1121 BN or equivalent as approved by GE.

S&F in repair stainless steel soap dish of approved pattern complete all as specified and as directed.

S&F CP grating of 100 mm dia including jointing with solvent cement complete all as specified and as directed.

Supplying and laying of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old un serviceable pipes complete all as specified and as directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old un serviceable pipes complete all as specified and as directed.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bend of 50 mm dia complete all as specified and as directed.

S&F 110mm bore PVC SWR bend complete all as specified and as directed.

S&F 110mm bore PVC SWR bend with acces door complete all as specified and as directed.

S&F 110mm bore PVC SWR branch piece single 'Y' equal or unequal complete all as specified and as directed.

S&F in repair 110 mm PVC (SWR) floor trap plain including jointing with solvent cement complete all as specified and as directed.

S&F 110mm bore PVC SWR junction single (single T) equal or unequal complete all as specified and as directed.

S&F 110 mm bore PVC SWR junction single tee with acces door complete all as specified and as directed

S&F in repair chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and as directed. Make:- Jaguar model No ALD CHR 565 or equivalent as approved by GE.

S&F in repair CP brass toilet paper holder complete all as specified and as directed. Make:- Jaguar Model No Can-1153N or equivalent as approved by GE.

Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster (work in foul condition and in shaft) complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:3 finished even & smooth without using extra cement mixed with liquid water proofing compound (Work in foul condition and in shaft) complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured & paid separately.

Supply only liquid water proofing compound of approved quality complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof paint apex ultima or any equivalent make on wall over a coat of wall primer (work in foul condition and in shaft) including necessary scaffoldings complete all as specified and as per manufacturers instructions and as directed.

M&L for complete removal of existing treatment and applying two coats of weather proof paint apex ultima or equivalent on wall over a coat of wall primer including necessary scaffoldings complete all as specified and as per manufacturers instructions and as directed.

S&F in repair 110 mm PVC (SWR) gully trap setting and jointing with solvent cement complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

M&L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of superficial area of wall n exc 150 Sqcm complete all as specified and as directed.

M&L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of superficial area of wall exc 150 Sqcm and n.exc 400 sqcm complete all as specified and as directed.

Removing building materials etc. (other than materials considered under schedule of credit) upto a distance of 3.00 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

M&L for preparation of old decorated surfaces and applying two coats of oil bound distemper on ceiling complete all as specified and as per manufacturers instructions.

S&F brass chromium plated bottle traps suitable for connecting with the coupling of WHB or urinal of size 32mm/40mm with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

Supply and fix LED flood light made out of pressure die cast aluminium housing with toughened glass of capacity not less than 70W , with system efficacy >110 Lumens/watt . IP 66 rated, with 10kv SPD on pole of height upto 11m using nesessary fixtures complete all as specified and directed by Engr-in-charge. Make:- Cat part No.LFL 70 CDL-60M of Crompton make or equivalent in Havells/Bajaj/Philips.

Supply and fix in replacement of copper cable flexible 2.5 Sqmm 3 core 230 Volts complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement of weather proof street light junction boxes made out of thermo plastic consisting of 4 nos of connectors of capacity 40 amp 415v and 1no of SPN MCB rating 6 AMP 240 V with proper closing arrangement, elmax connector for neutral link including pole mounting clamp with nuts, bolts etc.The box should have two cable entry and should be able to accomodate two cables of size 25Sqmm with proper space between each phases complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete (except concealed conduit) including fittings such as switches, ceiling roses, pendent, regulators, sockets, earth plug and socket etc and making good matching to the existing colour to the disturbed surface complete all as specified and as directed.

Material and labour for colour code point wiring concealed FRLS PVC insulated and unsheathed cable with 2.5 Sqmm copper conductor single core multistrand 1100 Volt grade confirming to IS 694 drawn through PVC conduit of suitable size of modular GI metal box for modular cover plates to be fixed with the switches, sockets, regulators etc. and including 2.5 Sqmm earth wire copper insulated wire connected to common earth dolly complete all as specified and as directed.

Material and labour for colour code point wiring concealed FRLS PVC insulated and unsheathed cable with 1.5 Sqmm copper conductor single core multistrand 1100 Volt grade confirming to IS 694 drawn through PVC conduit of suitable size of modular GI metal box for modular cover plates to be fixed with the switches, sockets, regulators etc. and including 1.5 Sqmm earth wire copper insulated wire connected to common earth dolly complete all as specified and as directed.

S&F modular switch one way 6A , 1 module ISI marked 230V, 50Hz supply complete all as specified and as directed.

S&F modular switch one way 16A , 1 module ISI marked 230V, 50Hz supply complete all as specified and as directed.

S&F modular socket one way 16A , 1 module ISI marked 230V, 50Hz supply complete all as specified and as directed.

S&F modular white cover plate with frame1/2/3 module complete all as specified and as directed.

S&F modular white cover plate with frame 6 module complete all as specified and as directed.

S&F ceiling rose 3 terminals PVC isolated body ISI marked base complete all as specified and as directed.

S&F in replacement wall mounted 20 W LED 4 ft batten output lumens greater than 100 lumen/watt,CRI = >60, CCT = >5500, internal surge protection up to 2KW , power factor>0.95 having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver making connection to ceiling rose to fitting with 3 core 1sqmm copper conductor complete all as specified and directed by Engr -in-charge. Make:- Crompton Trim Line. LDL-20-CDL or equivalent in Philips/Wipro/Havells.

Taking down and refix after completion of job works for exhaust fan of any sweep and make by disconnecting the electric connection, dismantling blades etc for checking and replacing the unserviceable parts complete all as specified and as directed by Engr-in-Charge. Note:- Spare parts shall be measured and paid seperately under relevant items.

M&L for painting exhaust fan of any sweep complete with one coat of synthetic enamel suitable paint by spraying after cleaning all dust etc complete all as specified and directed by Engr-in-charge.

M&L for dismantling/opening the exhaust fan of 300mm sweep of metal body any make removing the old defective winding carefully cleaning the inner parts and rewinding with the same gauge super enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and directed by Engr-in-charge.

M&L for dismantling exhaust fan of 300mm sweep removing old bearing and bushes of any size, supply and fix with new bearing suitable size of make TATA/NBC/SKF and bushes including greasing reassembling and testing all as specified and directed by Engr-in-charge.

M&L for removing defective old capacitor, supply and fix new capacitor of 4 mfd suitable for exhaust fan of any size, make, model and testing complete all as specified and directed by Engr-in-charge.

S&F surface mounted 18W luminaire 1x1 Tile, output lumen greater than 100 lumen/watts, glare free uniform illumination housing with opel diffuser with colour temp 6000K with driver making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor complete all as specified and directed by Engineer-in charge. Make:- Crompton Model PEARL NIOIII- S-LCTLSNE-18-FO-CDL equivalent in Philips/Wipro/Havells

S&F mirror light 14W out put lumens greater than 100 lumens/watt, CRI=>60, CCT=>5500, internal surge protection up to 2KW , Power Factor 2 feet making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor complete all as specified and directed by Engr-in-charge.

Gates Infra Construction Co

KDR CONSTRUCTION

Palace constructions

M/S V ASSOCIATES

K P DIVAKARAN