PROVN OF 05 CAR PARKING SHED IN SINGLE OFFICER LIVING AND CONSTRUCTION OF 40 MTR DRAINAGE SYSTEM WITH ONE SOAKAGE WELL IN BEG OFFICER MESS AT BEG AND CENTRE ROORKEE AND ADDITIONAL ALTRATION CUM SPECIAL REPAIRS TO BLDG NO P 1 OFFICER MESS STAFF AT BE

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil complete all as specified and directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes, drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM 1:4 complete all as specified and directed.

M & L 15 mm thick rendering with cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Excavating in trenches, exc 1.5 m wide and n exc 3.00 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

S&F MS framed work such as grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron door, ladders, framed balusters, walk way, railings frame work of water tank and similar work confirming to Fe 290 Gde E165 complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc. 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 m and making surface good in soft / loose soil complete all as specified and directed.

M&L plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L MS Steel work in tubular trusses/purline/ column/nut bolts/base plate including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 concrete complete all as specified and directed.

M&L preparation new steel surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer concrete complete all as specified and directed.

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as spfd & directed.

M&L Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering/cladding to wall, fixed with self tapping screws as specified complete all as spfd & directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete.

M&L 100mm thick plain cement concrete 1:4:8 type D-2, (using 40mm graded stone aggregate) as in sub base etc concrete complete all as specified and directed.

M& L 75mm thick Cement concrete 1:2:4 type B- 2, (using 40mm graded stone aggregate) finished even and smooth without using extra cement laid in alternate bays n'exc 2.50 Sqm complete all as specified and directed.

M & L for providing PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in kerbs/stops rounded or chamfered on edges of the interlocking tiles complete all as specified and directed.

M & L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in Cement mortar 1:4 Complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for glazed ceramic colour joint free tiles in vertical surface size 450X 350X 7 mm/ 450x 300 x7mm thick as required set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M & L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for Glazed ceramic tiles vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 25mm thick PCC type B-0, 1:2:4 (using 12.5mm graded stone aggregates) as in padding of roof surface complete all as specified and directed.

Dismantling/Taking down asbestos (corrugated, semi-corrugated etc) sheets in roof covering complete all as specified and directed.

Taking down wall/ceiling boards asbestos plywood of any thickness including cover fillets complete all as specified and directed.

M/L for Designer ceiling board 4mm thick with GI framed work of size 4mm main 'T' 24x38.5mm and cross T of size 24X28.5mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24x24x0.4mm covered with powder coated sheet 0.25mm thick for ceiling, ceiling boards 60cmX60CmX4mm thick, suspended with GI wire 3mm dia and up to 2 mtr long complete incl plugging in brick walls with steel rawl plugs @ 600mm C/C complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over framed work in section, in any position complete all as specified and directed.

M&L MS Roof trusses (framed), trussed, purlins, crane gantries, rails, bolts and fastenings and heavy bracket framing,ladder/gate (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

sidh builders

AMAN MATERIAL AND LABOUR CONTRACTOR

M/s Ravindra Kumar Gupta & Sons

MUNESH KUMAR TYAGI