Construction of Jadayu Mandapam at Arulmigu Kanagambigai Udanurai Muktheeshwarar Temple a subtemple of Arulmigu Mariamman Temple, Samayapuram, Trichy District

Earth work excavation for foundation in all classes of soils and sub soils and todepth as may be directed except in hard rock, requiring blasting, including infinal leads and lifts and re-filling the sides of foundation, with excavated earth in 150mm layers well watered rammed and consolidated, including depositing surplus earth clearing and levelling the site, shoring shuttering baling out water wherever necessary etc., complete complying with standard specification.

Supplying and filling in foundation in basement with filling M.sand in layars of 150 mm thickness well watered rammed and consolidated complying with relevant std specification including cost of supplying filling sand.

Cement concrete 1:5:10 (One of cement five of sand and ten of HBG jelly )for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete in respects complying with relevant Std, Specification and as directed by the Dept, Officers.etc, complete with standard specifications.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Removing cut stone masonry,stacking them carefully in tha places as shown by the departmental officers for re use including strutting,hire for all tools and plants emloyed,labor for work etc.,complete with standard specification.

Re-fixing the cut stone masonry using old stone including Labour charges for fixing in position ,hire charges for tools and plants for dressing charcoal scaffolding charges handling charges hoisting and fixing in position etc.,complete in respects complying with relevant std,specification&Documendation and as directed by the Dept,officers.etc.,

Labour charges for dressing and fixing of cut stone masonry works using New cut stones excluding cost and conveyance of stone from quarry but including all labour charges for tools and plants for dressing charcoal scaffolding charges handling charges hoisting and fixing in position etc complete.,The lime used should be sourced from which is highly iron fortified and suitable for structural and masonry works.

UbaPeedam

Kal Vari

Prastharam

Ubanam

Kumuthagam

Pattigai

Pillar

Bothiyal (four side pothiyal)

Mandapam Uthiram

Kabothagam

Viyalam

pavukkal

Supplying of cut stone for walls,pillar, pavukkal, Uthiram, Bodiyal and all works exclding labour charges but including cost and conveyance loding and unloding etc. complete with standard specification.

Cut stone of Size 1' 0" X1' 0" X 10'0" for uthiram

Cut stone of Size 1' 0" X1' 0" X 5'0" for upapeedam

Cut stone of Size 1' 0" X1' 0" X 10'0" for pavukkal

Flooring with cut stone slab of size 600mmX600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and lobour charges for paving and Pointing With Cement Mortar 1:5 & Combination Mortor1:1:5 etc complete.

Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 8 3/4" x 4 1/4" x 2 3/4" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.In Cement Mortar 1:5

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 23 cm x 23 cm x 20 mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers.

Providing new sudhai vigrahams in the vimanams and Rajagopurams with Copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in CM 1:1.5 finishing the same with LM 1:1.5 bringing to the correct shape (Lakshana) in confomist with silpa sastra inclusive of special omaments, weapons, peedam etc, complete and providing LM. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., compiete including Exterior Emulsion painting 2 coats over one coat of primer (one vigraham is accountable with one head, 4 hands with weapons, fomamental costumes etc,, as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed here under)

Sudhai size above 2' 6" upto 3' 6"

Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Sudhai size above 2' 6" upto 3' 6"

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coils Higher End

Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 450mm 16" Almonard Wall Fan with 2 Nos Pillar Clamp of 1½ "x ¼" MS flat with bolt and nuts for fixing the Fan on pillar with necessary connection.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting .

Supply and fixing of 80W LED flood light fitting on suitable angle iron frame clamps fixed with suitable bolts and nuts and wire connection and painting complete on the Existing post.

Supply and fixing of 2Way sheet steel enclosure Box (metal) in wall only.(Higher end)

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour.

Sub Total

Please Enable Macros to View BoQ information