Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | VARDHANAN.N L2 | RAVEENDRAN R L1 |
|---|---|---|---|---|---|
| 1.00waiting shed maintenance | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 3.36 | cum | 294.54 ₹989.65 | 279.47 ₹939.02 Lowest |
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | 3.84 | cum | 6,495.45 ₹24,942.53 | 6,162.98 ₹23,665.84 Lowest |
| 1.00 | 50.2.26.1:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge. | 9 | cum | 364.95 ₹3,284.55 | 346.27 ₹3,116.43 Lowest |
| 1.00 | 50.6.1.3:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 4.2 | cum | 6,862.5 ₹28,822.5 | 6,511.24 ₹27,347.21 Lowest |
| 1.00 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 10 | sqm | 1,454.59 ₹14,545.9 | 1,380.14 ₹13,801.4 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 300 | kg | 153.15 ₹45,945 | 145.31 ₹43,593 Lowest |
| 1.01 | OD123248/2025-2026:ACP Cladding : Providing and fixing Aluminium Composite Panel as per architect approved design using
the following sections and accessories : 1) ACP : 4mm thick with 50mm skin thickness (Alstrong
/equivalent). 2) Frame: 50x25x1.2 mm (Jindal sec 14100). 3) Silicon Sealant (Dow Corning, grade 789). 4)
Baker Rod (Supreme/Equivalent ). 5) Bracket (GI U Clamp). 6) Cross Bolt (GI galvanized). Including cost
and conveyance of all material labour charges scaffolding etc. complete. | 23.4 | sqm | 3,501.23 ₹81,928.78 | 3,322.02 ₹77,735.27 Lowest |
| 1.01 | OD124032/2025-2026:Providing and fixing false ceiling with 4 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 40 | sqm | 692.44 ₹27,697.6 | 657 ₹26,280 Lowest |
| 1.01 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 50 | kg | 692.65 ₹34,632.5 | 657.2 ₹32,860 Lowest |
Tender Value
₹5.5 L
EMD Value
₹13,769
Closing Date
22 Aug 2025, 5:00 pmClosed
Assistant Engineer
Office of the Assistant Engineer, LIDEW Section, Parasala Grama Panchayat
PSLA332/26_Maintenance of various waiting shed in Parassala Grama panchayath
2025_LSGD_784255_1
05/2025/AE/LIDEW/PSLA
Open Tender
Civil Works - Others
Item Rate
120 days
Parassala
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,215
Yes
₹13,769
Yes
24 Sept 2025
12 Aug 2025
25 Aug 2025
12 Aug 2025
22 Aug 2025
12 Aug 2025
Amount
waiting shed maintenance
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
50.2.26.1:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
50.6.1.3:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD123248/2025-2026:ACP Cladding : Providing and fixing Aluminium Composite Panel as per architect approved design using the following sections and accessories : 1) ACP : 4mm thick with 50mm skin thickness (Alstrong /equivalent). 2) Frame: 50x25x1.2 mm (Jindal sec 14100). 3) Silicon Sealant (Dow Corning, grade 789). 4) Baker Rod (Supreme/Equivalent ). 5) Bracket (GI U Clamp). 6) Cross Bolt (GI galvanized). Including cost and conveyance of all material labour charges scaffolding etc. complete.
OD124032/2025-2026:Providing and fixing false ceiling with 4 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)
21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).
OD124108/2025-2026:Providing and fixing pre coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD124357/2025-2026:Lettering in stainless steel for name board work including labour , material and fitting charges etc . complete ( Area to be measured including standard spacing between letters)
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
VARDHANAN.N (BID ID -2299259)
Bidder Name
VARDHANAN.N
RAVEENDRAN R
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1288193.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .