Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.8 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹5.7 L+₹96,573.35 (20.3%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹6.0 L+₹1.2 L (25.3%)Admitted-Finance KALARIKKAPARAMBIL BRAHMAPURAM P O AMBALAMUGAL ERNAKULAM 682 303 | ERNAKULAM | ERNAKULAM | KERALA | 682303 | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | saaj constructions L3 | DEEPAK T.M. AMIGO ELECTRIC L2 | ASKIN ELECTRIC P. LTD L1 |
|---|---|---|---|---|---|---|
| 1.00Electrification Works | ||||||
| 1.00 | Supply, installation, testing and commissioning of Outdoor Floor / Wall Mounting Cubical Type KSEBL Metering Panel with Double Door and Canopy suitable for 240 V, Single Phase, 2 Wire 50 Hz AC supply system having sufficient front surface area fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame works and covers, 2 mm thick for gland plates, cleaning and finishing complete with 7 tank process for Powder Coating in approved shade and then provided with Clear Coating, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 12 mm x 3 mm at the rear with 2 Nos. earth stud and control wiring with 2.5 / 1.5 Sq.mm FRLS (Flame Retardant Low Smoke) or HRFR (Heat Resistant Flame Retardant) PVC insulated single core copper conductor cables, cable alleys etc. complete as required. The panel shall conform to the Electrical Inspectorate and KSEBL standards and it shall only be manufactured after getting approval from the Engineer-in-charge and the Consultant.
INCOMER
1 Nos - Provision for Fixing Single Phase Energy Meter
1 Nos - 32A Bakelite Fuse Units with HRC Fuse of Suitable Rating 1 Nos - 32A Neutral Link
1 Nos - 32A 10kA DP C Curve MCB
There shall be Separate Compartment for Energy Meter and Fuse Units/Neutral Link with KSEBL Sealing Provision
SURGE PROTECTION DEVICE
1 Nos - 2 Module DIN Rail Mounting Type 1 + Type 2 / Class 1 + Class II 50kA SPD on the Incoming / Outgoing Side of Incomer MCB along with Green and Red Indication Lamps with Control MCBs [The connections to Phase, Neutral and Earth shall be done using 16 Sq.mm FRLS (Flame Retardant Low Smoke) or HRFR (Heat Resistant Flame Retardant) PVC insulated single core copper conductor cables with less than 0.45m in length]
OUTGOING
1 Nos - Outdoor / Street Light Compartment with 16A/25A 10kA DP C Curve MCB, 25A TP AC3 Duty Contactor with Auxiliary Contacts, 24Hour Digital Timer Switch, Auto - Manual Selector Switch (2 Pole 2 Way), ON (Red), OFF (Green) Push Buttons and ON (Red), OFF (Red) Indication lamps with Control MCBs and 2 Sets of 6A/10A 10kA DP C Curve MCB with 25A 30mA DP RCCB as Outgoings | 1 | no | 55,295 ₹55,295 | 61,225.55 ₹61,225.55 | 55,266 ₹55,266 Lowest |
| 1.00 | Supply, installation, testing and commissioning of 150W to 200W LED Street Light with 5 Years Onsite Warranty having output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8kV and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be separately accessible for maintenance (LM 79 and 80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | 5 | no | 25,680.5 ₹1,28,402.5 | 25,680.52 ₹1,28,402.6 | 22,670 ₹1,13,350 Lowest |
| 1.00 | Supply and installation of suitable size of SMC Junction Box for unprotected outdoor application having provision for glanding up to and including 16 Sq.mm A2XFY cables and fixing 2 Nos of DP Isolator / MCB using Aluminium strips and Stainless Steel bolts, buts, round and spring washers or screws etc. complete as required | 5 | no | 2,059.45 ₹10,297.25 | 2,058.47 ₹10,292.35 | 1,945 ₹9,725 Lowest |
| 1.00 | Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole | 10 | each | 890 ₹8,900 | 865.29 ₹8,652.9 | 750 ₹7,500 Lowest |
| 1.00 | Supply and laying of XLPE insulated and PVC sheathed armoured Aluminium power cable of 1.1 kV grade of the following sizes in the existing excavated trenches, built up trenches and pulling through existing pipes including all minor civil works etc. complete as required 4 Core 10 Sq.mm | 255 | metre | 315.5 ₹80,452.5 | 311.3 ₹79,381.5 | 212.27 ₹54,128.85 Lowest |
| 1.01 | Supply and making end termination with PVC gland and aluminium lugs and cable armour earthing using adjustable Stainless Steel brackets/clamps and existing aluminium/copper sockets for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kV grade etc. complete as required 4 X 10 Sq.mm (21mm) | 10 | set | 280.57 ₹2,805.7 Lowest | 305.26 ₹3,052.6 | 308.3 ₹3,083 |
| 1.01 | Supply and making end termination with PVC gland for the following size of PVC insulated and PVC sheathed / XLPE copper conductor flexible cable of 1.1kV grade etc. complete as required 3 X 1.5 Sq.mm (9mm) | 5 | no | 37.5 ₹187.5 Lowest | 245.57 ₹1,227.85 | 139.1 ₹695.5 |
| 1.01 | Supply of superior quality aluminium palm cable socket and making core termination of cables of the following sizes including crimping etc. complete as required
10 Sq.mm | 6 | no | 96.2 ₹577.2 | 35.5 ₹213 | 23 ₹138 Lowest |
| 1.01 | Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm | 60 | metre | 26.1 ₹1,566 Lowest | 97.4 ₹5,844 | 87 ₹5,220 |
Tender Value
Refer Docs
EMD Value
₹18,890
Closing Date
25 Sept 2025, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Manager (Electrical Projects)
KEL MAMALA KOCHI
STRRET LIGHT MAINTENANCE WORKS ON MOONAMKALLU BRIDGE OF KADAPPUARAM GRAMA PANCHAYAT IN THRISSUR DISTRICT
2025_KEL_798910_1
KEL/KMEP/EPROC/028/2025-26
Open Tender
Electrical Works
Item Rate
KEL MAMALA
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,511
₹18,890
Yes
29 Sept 2025
18 Sept 2025
26 Sept 2025
18 Sept 2025
25 Sept 2025
18 Sept 2025
18 Sept 2025 - 25 Sept 2025
Amount
Electrification Works
Supply, installation, testing and commissioning of 150W to 200W LED Street Light with 5 Years Onsite Warranty having output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8kV and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be separately accessible for maintenance (LM 79 and 80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
Supply and installation of suitable size of SMC Junction Box for unprotected outdoor application having provision for glanding up to and including 16 Sq.mm A2XFY cables and fixing 2 Nos of DP Isolator / MCB using Aluminium strips and Stainless Steel bolts, buts, round and spring washers or screws etc. complete as required
Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole
Supply and laying of XLPE insulated and PVC sheathed armoured Aluminium power cable of 1.1 kV grade of the following sizes in the existing excavated trenches, built up trenches and pulling through existing pipes including all minor civil works etc. complete as required 4 Core 10 Sq.mm
Supply and making end termination with PVC gland and aluminium lugs and cable armour earthing using adjustable Stainless Steel brackets/clamps and existing aluminium/copper sockets for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kV grade etc. complete as required 4 X 10 Sq.mm (21mm)
Supply and making end termination with PVC gland for the following size of PVC insulated and PVC sheathed / XLPE copper conductor flexible cable of 1.1kV grade etc. complete as required 3 X 1.5 Sq.mm (9mm)
Supply of superior quality aluminium palm cable socket and making core termination of cables of the following sizes including crimping etc. complete as required 10 Sq.mm
Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm
Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.2.5 sq mm
Excavation of all types of soils for the laying of PVC insulated and PVC sheathed / XLPE Aluminium or Copper conductor cable, GI / DWC HDPE / RCC / PVC / Conduit Pipes, Earthing conductors to the required width and depth up to and including 0.75m and back filling etc. complete as required. (The trench dimensions and specifications shall conform to CPWD / PWD, Electrical Inspectorate and KSEBL Standards)
Earthing with ISI Marked Nickel Sealed Copper Bonded 20mm dia, 3.0m long Rod with T clamp having 250 microns coating thickness tested as per IEC 62561-2 and providing Masonry Enclosure with Concreate Slab Cover or Heavy Duty FRP Enclosure with Cover Plate having 5000kg load bearing capacity including sufficient earthing compound etc. complete as required
Supply of Stainless Steel 304 Grade 6mm x 11/4 Inch bolt and its nut, spring washer and double round washers etc. complete as required
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
Supply and installation of 10 kg/cm2 PVC Pipes of the following sizes with all necessary accessories and laying in existing excavated trenches, built up trenches, clamping in built up trenches / walls / MS supports using Stainless Steel saddles and screws of which spacing between 30cm to 60cm including all minor civil works etc. complete as required Up to and including 40mm
Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size
Supply, fabrication and installation of Outdoor Floor / Wall Mounting Cubical Type KSEBL Metering Panel / PVC Pipe / Cable supports / Name Board supports etc. using MS Angles, Flats, C Channels and Square Tubes of adequate size painted with two coats of epoxy primer and two coats of black / grey / other approved shade epoxy paint. The scope also the includes the supply and installation of necessary rectangular / square plates, anchor fasteners, bolts, nuts, round and spring washers or screws etc. complete as required
Dismantling of existing old unused Poles, Meter Board, Junction Boxes and LED Light Fittings of all poles, Armoured and Flexible Cables etc. complete as required
Supply of all materials and providing maintenance works to the already installed pole. The scope of works includes rearrangements of brackets for fixing lights will all necessary accessories, weldings, removing rust, painting with 2 coats of epoxy paint after applying 1 coats of epoxy primer etc. complete as required
Preparation and submission of application for Single Phase Connection along with drawings, detailed load schedule etc. and co-ordination with KSEBL for energization etc. complete as required. (*All Statutory fees for getting connection shall also come within the scope of the Contractor)
DEEPAK T.M. AMIGO ELECTRIC (BID ID -2356362)
saaj constructions (BID ID -2357874)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .