Renovation of parking shed at ABGC PO office

Civil work

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7microns epoxy primer o both side of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or as desired byEngineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curvedsurfaces, excluding the cost of purlins, rafters and trusses and including cutting to size andshape wherever required.

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

Brick wrok in cement mortar1 :6(1 cment :6 coarse sand ) in super struction with fly ash bricks cement mortar1 :6 (1 cement :6 coarse sand)

Brick wrok in cement mortar1 :6(1 cment :6 coarse sand ) in foundation and plinth with fly ash bricks cement mortar1 :6 (1 cement :6 coarse sand)

12 mm cement plaster of mix : (1 cement: 6 fine sand

12 mm cement plaster finished with a floating coat of neat cement of mix : (1 cement: 4 fine sand)

Structural steel work riveted, bolted or welded in built up sections, trusses and framedwork, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complet

P/F UPVC pipeline All complet external work 25mm dia