Providing Grid Connected Solar Plants at For Block No 1 and Block No 4 of COC, Panvadi, Vyara,Di-Tapi

Providing Grid Connected Solar Plants at For Block No 1& Block No 4 of

COC,Panvadi,Vyara,Di-Tapi

DESCRIPTION TENDER RATE

Qty Unit Rate in Per Amount

No Rate in Words

1A 20 KW Supply, Installation, Testing & Commissioning of following size of Grid 44081.45 Rupees Forty PER

Tied Solar Power Plant with

Solar Panels (ALMM approved & DCR): Frame Material : Anodized Four Thousand KW

Aluminum alloy Frame With Twin Wall Profile, Front Cover : High Eighty One And

Transmission Low-Iron Tempered Glass (AR Coated), High efficency Paise Forty Five

and positive power tolerance Pmax: 0/+5, Module Efficiency should be

approx. 19.5%-22%, Normal operating temperature 45'C, Junction Only

Box with Waterproof IP67 & MC4 Compatible and Enclosed with

Bypass diodes, 100% Electroluminescence test to ensure error free

Modules, Thep. temp. co-efficient of the PV module shall equal or

better than -0.45%/degree C. Solar PV modules of minimum fill factor

75% to be used. Unit Production:- More than 4.5 Unit /kw /day

(Actual)(1Year Avg) With 10 year Product warranty and 25 year Linear

Power Warranty includes all mechanical and electrical parameters of

the Solar panel. Modules must be complied to the DCR(Domestic

content requirements). The Ration of AC to DC is 5:6 for the

Installation capacity which are given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max

efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating

Altitude (m) ≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating

Tempreture Range: -25~60°C, Integrated protection of Inverter are

Anti-islanding Protection, Input Reverse Polarity Protection, Insulation

Resistor Detection, Ground fault protection, Residual Current

Monitoring Unit, Output Over Current Protection, Output Short Circuit

Protection, Output Over Voltage Protection, PV array string fault

Protection. Protection Degree: IP65, User Interface LCD & APP,

Datalogger & Communication: GPRS / Wi-Fi.

Integrated, Input Reverse Polarity Protection Integrated, Insulation

Resistor Detection Integrated, Residual Current Monitoring Unit

Integrated, Output Over Current Protection Integrated, Output Short

Circuit Protection Integrated, Output Over Voltage Protection

Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting

Structure: The mounting (Rectangular pipe / square pipe / circular

pipe) with requisite cross bars, nuts and bolts, etc. shall be Hot deep

galvanized with minimum 80micron coating. The Rectangular / square

/circular hollow pipe section used for the structure should have a

minimum thickness of 2.0 mm. other than above, the material

thickness should be minimum 2.5 mm. A certificate of a structural

engineer certifying the strength and stability of the mounting structure

to withstand the weight and wind speed of 150 km/hour throughout the

life span of 25 years of the system, shall be submitted by the vendors.

Hot Dipped Galvanized steel coils. suitable arrangement for base

plate for foundation , solar panel mounting, the structure should be

suitable for carry the load of solar panel,wiring, sprinkler system etc.

with necessary foundation work/wall mount, j bolt, anchor fastner etc.

the nut bolt used for installtion of stucture should be (SS 304)

quality.The ground clearance of the bottom most edge of solar panel

shall not be less than 300 mm to 1200 mm or as per site’s

technical/feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section (thickness) should be 40MM * 40MM

Balane of System with necessary Swichgears (Suitabel size and

protection of ACDB & DCDB), inter connecting wiring, earthing system

as per the CEIG drawing approval, lightining arrester system as per

the CEIG drawing approval, all liasoning work with various gov.

dipartment like state nodal agency,DISCOM & CEIG is included in

agency scope (Excluding All charges namely GEDA Application fees,

Solar connectivity Charges, Meter connectivity Charges, Meter testing

Charges and system stability/strenthning charges.) (B) Grid Tied Solar

Power System: 7 - 10 kW (3 - phase)[14-1-1]

Deputy Executive Engineer, Executive Engineer,

Electrical R & B sub-Division, Electrical R & B Division,