Renovation of Ramanchira anicut in Cheruvathur Grama Panchayat Mechanical works.

Amount

Dismantling of the existing 02 nos of wooden shutters and its hoisting mechanisms

od42356/2020_2021/MH : Dismantling the canal shutter ( up to 2 tonne weight)/hoisting unit/ embedded parts, etc. of the same and stacking at a distance of 100 meter including hire of machinery, labour, etc. complete as directed by the departmental officer at the site. (Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80%)

Supply of materials, fabrication, painting and erection of 02 nos. of MS shutters, embedded parts and its hoisting mechanisms

od44769/2021_2022/MH : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

od44770/2021_2022/MH : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od44772/2021_2022/MH : Supply of MS round bar including cost of conveyance charges

od28519/2019_2020/MH : Supply of M.S Bolt with nut and washer

od44773/2021_2022/MH : Supply of MS checquered plates including cost of conveyance charges

od42357/2020_2021/MH : Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

od43009/2020_2021/MH : Fabrication and erection of Embedded parts for canal shutters(up to 2 tonne weight) and accessories as per approved specifications , drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts , incidental and handling charges etc complete but excluding cost of material already supplied

od42358/2020_2021/MH : Fabrication and supply of structural steel canal shutters ( up to 2 tonne weight)/ hoisting bridge/platform and acessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od42359/2020_2021/MH : Erection of Canal shutter (upto 2 Tonne weight)/Hoisting bridge/ platform including handrails, ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance, lead and lift charges, etc. complete but excluding cost of materials already supplied

Supplying and fixing of rubber seals and roller assembly

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117 : Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

od54898/2021_2022/MH : Supplying and fixing cast steel thrust roller assembly having 120mm Dia., 60mm tread width, SS(304) shaft and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc., complete

Providing Double worm and Pinion, Screw rods for 02 nos of shutters

od42577/2020_2021/MH : Providing Double worm and pinion having a lifting speeed of around 5.00 cm/min for hand operation/manual operation including cost of all materials , labour,hire charges and conveyance

od42578/2020_2021/MH : Providing EN-8 screw rod 7.50 tonne capacity 4.00 metre lift screw hoist having one number of EN-8 screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour,hire charges and conveyance.

od43010/2020_2021/MH : Providing shaft to connect two worm reducers (already supplied) of the operating mechanism including cost of MS shaft, coupling flange, keys, bolts & nuts, rubber packing, etc.

Mechanization of Hoist and trial run

od55005/2021_2022/MH : Supply and fixing of 3 HP motor and reduction gear unit driven through self locking worm reducer, coupling mechanism for engaging/disengaging including cost of all materials, labour, hire charges and conveyance.

od44981/2020_2021/MH : Supply and fixing of main panel board, Main switch, Starter, forward-reverse switch, line indicators, cost of wires, etc. including cost of all materials (for panel board fabrication), labour charges, machinery etc. complete

od55045/2021_2022/MH : Alignment and trial run of anicut shutters including cost of all materials, labour charges and hire of machinery etc. complete for the smooth operation of the shutter both manually and electrical with generator.

Civil works- Providing ring bunds and bailing out water, enlargement of grooves for fixing new embedded parts

od42362/2020_2021/MH : RING BUND Type-I-Putting up ring bund as per approved shape 3 m bottom width, 2m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 1 m apart and filled inbetween with puddle clay to form bund for an average height 4.00 m including labour, earth work, dismantling the bund after completion of the work etc. complete.

60.2.2 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

od42363/2020_2021/MH : Removing of existing embedded parts; chipping the groove for fixing embedded parts of shutter including cost ofmaterials, conveyance, hire charge, labour and other incidental charges etc., complete

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Amity Projects & Construction

Bidder Name

ANILKUMAR K K

Amity Projects & Construction