Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹40.6 LAccepted-AOC H NO 1366 3 GALI NO 6 MATA ROAD NEAR HAPPY MODEL SCHOOL RAJIV NAGAR GURGAON 122 001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | 1 | Accepted-AOC accepted amt | |
| 2 | 2₹46.6 L+₹5.4 L (13.2%)Rejected-Finance | 2 | Rejected-Finance other than L1 | |
| 3 | 3₹49.5 L+₹8.3 L (20.2%)Rejected-Finance VILLAGE POST KORUWA CHAKRATA DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | 3 | Rejected-Finance other than L1 |
Tender Value
Refer Docs
EMD Value
₹99,600
Closing Date
15 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE P DDN
GE P DDN
REPAIR/MAINT AND MISC B/R WORKS OF SFF ACADEMY AREA AT AGE B/R (P) CHAKRATA UNDER GE (P) DEHRADUN.
2023_MES_602727_1
GE P/ DDN/T-4 OF 23-24
Open Tender
Civil Works
Works
180 days
AGE BR (P) Chakrata
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE P DDN
₹99,600
Yes
16 Aug 2023
13 Jun 2023
17 Jul 2023
13 Jun 2023
15 Jul 2023
27 Jun 2023
Amount
Demolition of reinforced cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level complete all as specified and directed .
Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed .
Demolition of brick /stone work , built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc including demolition of precast RCC articles and disposal of debris out of MoD land complete all as specified and directed.
Dismantling unframed timber scantling 40 sqcm and over in section, in any position all as specified and directed
Dismantling wall and ceiling board fiber, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified .
Taking down chowkhats or frames exc 1.50 and n.exc 4 Sam each (without talking off shutters from the frame) complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sam each and removing from site.
Taking down shutters of any description not exceeding 1 Sam each complete all as specified and directed .
Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and removing from site complete all as specified and directed.
Dismantling water tanks of capacity 500 ltr from any position complete all as specified and directed
Dismantling water tanks of capacity 1000 ltr from any position complete all as specified and directed
Dismantling boarding, any descripition, fixed in any position with nail all as specified and directed
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed .
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed .
S & F 0.63mm thick Galvanized, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed .
S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed .
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed .
S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed .
S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed .
All as per item No 20 hereinbefore but in skirting including 10mm thick plastering for backing coat in cement mortar (1:4)
M&L 20mm thick granite (black) work (table rubbed and polished) in steps, jambs pillars, window cills , cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar (1:6) etc complete all as specified and directed.
M&L for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM (1:4) complete all as specified and as directed.
S&F light shade vitrified ceramic tiles 10mm thick n.exc 0.36 Sam each in floors with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
Same as per ser No 24 but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed .
M&L, providing Kota stone slab 20 to 25mm thick machine cut and mirror polished to size and fixed in floor and set and jointed in neat cement slurry and pointed with grey cement to match the stone floor/steps treads over 15mm thick screed bed in CM (1: 6)complete all as specified and directed.
M&L providing Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed including 10 mm thick plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed .
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purling from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and directed .
M & L for 2nd class hard wood plain fillets, square, rectangular or triangular in section clean sawn, secured with nails exc 13 and n.exc 25 sqcm complete all as specified and directed .
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed.
S&F for 4 mm thick veneered decorative Plywood (no of ply 05), grade-I (with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work complete all as specified and directed.
M&L for second class hardwood as in scantlings clean sawn timber fixed complete all as specified and directed ..
M&L for RCC type B-1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like such as cover slab of septic tank/soak well etc complete all as specified and as directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and as directed
M&L for Mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.
M&L 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed .
S & F pressed steel frames 125 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate including one shop coat of primer complete all as spd and directed
M & L for cement concrete type C-0, (1:3:6) using 12.5 mm graded crushed stone aggregate as in back filling of hollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed.
S&F for second class hardwood 35 mm thick plain, framed, paneled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed .
Refixing of Shutter of any description obtained from taking down item above exc 1 sqm and n exc 2 sqm each complete all as specified and directed .
S&F for second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitered beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b) complete all as specified and directed .
S&F for second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. ( sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitered beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b) complete all as specified and directed .
S & F solid PVC door frame of size50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying fixing in opening as per specification & drawing complete all as specified & directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified and directed .
S&F powder coated (minimum thickness pf power coating 50 micron) anodized aluminum frame for door, window, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed .
S&F powder coated (thickness power coating not less than 50 micron) anodized aluminum door shutters aluminum section weighing 0.55kg/m including necessary joining cleats glazing clips rubber neoprene packing, handle 2 Nos in each door ,hinges anodized aluminum snap beading screw lock etc complete all as specified.
S&F powder coated (thickness power coating not less than 50 micron) anodized aluminum window and ventilator shutters, fixed type without sash bar aluminum section weighing 0.55kg/m including necessary joining cleats glazing clips rubber neoprene packing, handle 2 Nos in each door ,hinges anodized aluminum snap beading screw lock etc complete all as specified.
M&L for fixing 4 mm thick anodized aluminum composite panel fixed in aluminum frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and all as specified and directed.
S&F Sheet glass 3mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane complete all as specified and directed .
Hacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty complete all as specified and directed .
S& F for 4 mm thick sheet glass ordinary quality and glazing with oil putty wire clips in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repair 4 mm thick figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified and directed.
S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen, cupboards. The laminated shutter should be pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.
S&F for galvanized mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed .
S&F in repairs, galvanized mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed .
S& F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.
S&F steel window/Ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing (glass) , gauging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over a coat of red oxide primer including taking old windows all as specified and directed
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed
S&F Butt hinges, medium weight, cold rolled mild steel, 75mm size. complete all as specified and directed .
S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size. complete all as specified and directed .
S& F Aluminum, anodized, barrel tower bolts of extruded section and fixed, Length of bolt in 150mm complete all as specified and directed
S&F Aluminum, anodized, barrel tower bolt 200mm long of extruded section and fixed complete.
S&F Aluminum handles, cast type, anodized Size of handle in 150mm complete all as specified and directed.
S&F Aluminum handles, cast type, anodized Size of handle in 100mm complete all as specified and directed.
S&F Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed Length of bolt in 250 mm complete all as specified.
S&F in repair floor door stopper of aluminum alloy body and tongue, anodized, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed.
S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames. complete.
S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel rings with 50 mm dia and proportionate for part there off, with stainless steel brackets near to ends with stainless steel finish for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings) complete all as specified and directed .
Taking up or down 15mm bore, steel tubing and connection removal from site complete all as specified and directed.
Taking up or down 20mm bore, steel tubing and connection removal from site complete all as specified and directed.
S&F tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore. complete all as specified and directed .
S&F tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore. complete all as specified and directed .
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed
S & F 500 ltr Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) with Ball brass valves, high pressure, with 20 mm polythene float and fly nut complete, screwed for iron pipe or brass ferrule hoisted and fixed in position incl refixing of inlet, outlet & over flow pipe all as specified in SSR Part I.
S & F 1000 ltr Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) with Ball brass valves, high pressure, with 20 mm polythene float and fly nut complete, screwed for iron pipe or brass ferrule hoisted and fixed in position incl refixing of inlet, outlet & over flow pipe all as specified in SSR Part I.
S&F in repair 15mm bore bib cock chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs for 15mm dia of pipe Angle valves/stop cock, fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed complete all as specified and directed.
S&F in repairs CP wall mixer (3 in 1) complete all as specified and directed
S& F for in repairs Swan neck CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.
S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed.
S&F in repairs Brass CP shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed.
S&F in repair Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.
S&F in repair viterous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed.
S&F in repair of PVC low level flushing cistern dual flush top push,10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle, flush pipe incl CP bracket complete all as specified and directed .
S & F in repairs Vitreous China Urinal, full stall type, white incl urinal spreader (excluding flushing cistern, flush pipe and waste pipe complete all as specified and directed .
S&F in repairs Viterous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.
S&F in repair sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.
S&F Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts, bolts & washers including in repair complete all as specified and as directed.
S&F in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes.
Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar, and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed.
S&F PVC (SWR) bends any radius 75mm dia all as specified and directed.
S & F in repairs 75mm PVC floor trap, ISI marked with cp grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.
S & F in repair Grating doom 100mm dia of PTMT Minimum weight 25gms
S&F in repair Door cill powder coated aluminum of 900mm size screwed down to shutters complete all as specified and directed.
S&F in repair soap dish 160mm (min weight 390 grams) length of stainless steel fixed to wall complete all as specified and directed
S&F in repairs CP toilet paper holder complete all as specified and directed
S&F in repairs CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore pipe complete all as specified and directed.
S&F in repairs CP Health Faucet with 1 mtr metallic Expandable tube & hook complete all as specified and directed.
S&F in repair Mortise lock, vertical type Brass 2 levers, size 100 mm complete all as specified and directed
S&F in repair/new for aluminum (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F of MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F Rolled mild steel Fe-410-W(Gde-E-250) quality-B in joist, channel, angle or tee sections fixed independently without connecting plates etc (cut to ordinary length i.e. within 20 mm of the length indicated as directed complete all as specified and as directed
S&F IInd class hardwood 25mm boarding, with nails, clean sawn with butt joint in any situation (Except flooring and skirting) complete all as specified and directed
M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.
M&L for PCC 1:3:6 type C2 (40mm graded stone agg) 100mm thick as in base/ sub base complete all as specified and directed.
M&L Bk wk old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
M&L Bk wk old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster any thickness any description on brick or stone walls, partitions, ceilings etc incl raking out joints hacking for key scrubbing down with water etc including cleaning of bush, shrubs, vegetation, grass, weed, saplings etc complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM (1:4) and finished even and smooth without using extra cement all as specified & directed
M&L for preparation of new plastered or unplastered surface of walls including cornices, pilasters etc and applying two coats of oil bound distemper over a coat of 1 mm thick wall care putty including Washing floors, cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premise, clean and tidy etc complete all as specified and as directed.
M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of Weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.
M&L for Preparation of new wooden surfaces of any description, over 10 cm in width or girth , described and painting with two coats of synthetic enamel paint with pink primer etc complete all as specified and as directed
M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint with red oxide zinc chrome etc complete all as specified and as directed
MOHAN SINGH AND SONS
J P CONSTRUCTION
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .