Construction of Addtional Accommodation Building for Primary Health Centre at Panchrukhi Distt. Kangra H.P.

Amount

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) up to any heights / depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the serviceable and un-serviceable material clear from the edges of excavation and then returning the stacked soil in 15cm (fifteen centimeter) layers where required into plinth and side of foundation etcetera, consolidating each deposited layer by ramming & watering and then disposing of all surplus un-serviceable excavated earth as directed within all leads and lifts, by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and disposed of material to be neatly dressed and leveled as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation, footings basis of columns etcetera and mass concrete as per PWD specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls up to all width and heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing and as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement isto six sand isto twelve aggregate) graded crushed/broken stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight aggregate) graded crushed/broken stone aggregate 40mm (fourty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinthas per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtained the minimum compressive strength of 20N /mm2 (Twenty newton per square millimeter) with cement contents not less than 330 kgs (three hundred thirty kilogram) per cubic metre to give an even smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundation footings, bases of columns and the like and mass concrete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 desing mix to obtain the minimum commpressive of strength of M-20 N/mm2 with cement concrete not less than 320 Kg mm3 excluding cost of form work and reinforcement for reinforced concrete work in walls any thickness but not less than 0.10mtrs. (zero point one zero metre) thickness including attached pilasters, buttresses plinth and string courses upto any depth and height including curing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts upto floor all level and as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N.mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing and shelves and their support balconies beams girders bressumers and cantilevers upto floor all level and curing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing upto all floor level and curing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compressive strength of M-20 N/mm2 with cement contents not less than of 320kg/m3 (three hundred twenty kilogramme per cubic metre) including cost of form work but excluding reinforcement for reinforced concrete work in moulding as a cornices window sills etc not exceeding in 15 (fifteen) centimetre in grith and curing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing Tor steel reinforcement of TATA/TISCO/SAIL for RCC work including bending, binding and placing in position complete up to all floor levels with cost of binding wire as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying damp proof course 100mm (one Hundred milimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four aggregate) graded crushed/broken stone aggregate 12.5mm (tewelve decimal five milimeter) nominal size mechanically mixed and curing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt) 80/100 (Eighty by hundred) or equivalent using 1.70 kg (one decimal seven zero) kilogram per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked with kerosene as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 20 cm (twenty centimetre). thick composite stone masonry with stone facing of chisel dressed stones one line dressed in cement mortar 1:6(1 cement :6 sand) and concrete backing with cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm (twenty millimetre). nominal size) on inner face of walls including centring, shuttering and propping complete up to all floor level and curing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Construction of 40cm (forty) centimetre thick cavity wall consisting 10cm (ten centimetere) wide cavity and 20cm (twenty centimetre) thick outer wall and 10cm (ten centimetere) thick inner wall of precast cement concrete block laid in cement mortar 1:6 (one cement is to six sand) and strengthed with hoop iron and bitumen coated cross ties including making weep holes and vent hole complete. 2 Nos 6/8mm dia bars in Z shape crossing each other shall be provided at the internals 90 to 100 cm (ninty to hundred) centimetere length and vertically in cavity and at the time of masonry work it may be ensured that the cavity between the wall dose not get fill up with cement mortor ( area of one face will be considered for payment) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Precast concrete block masonry in partition walls 10cm (ten centimetre) thick with solid block of approved size including quion blocks, jamb blocks, closer etcetra made of cement concrete 1:3:6 (one cement : three sand : six graded/crushed, crushed stone aggregate 40mm (forty millimetre) and down gauge) in cement mortat 1:6 (one cement : six sand) upto all floor level including curing and as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement : six sand : twelve graded stone aggregate 20mm (twenty) millimeter nominal size mechanical mixed in cement mortor 1:6 (one cement six sand) including curring and as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 (one cement : six sand) and curing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum natural wooden shade of Jindal work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS 1868 (Minimum anodic coating of grade AC 15) frame for entrance door No. 14081 size 127x44.45x3.19mm (one hundred twenty seven into four four point four five into three point ninteen) millimetre and internal door frame No. 14081 size 101.60 x 44.45x 3.18mm (one hundred one point sixty into four four point four five into three point eighteen) millimetre or any other section as required fixed with raw plugs and screws or with fixing clips, or with expansion hold fasters including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC neoprene felt etc. Aluminum sections shall be smooth rust free, straight, mitred and jointed mechanically where ever required including cleast angle, aluminum, snap beading for glazinge / panelling C.P. brass / stainless steel screws all complete as per architectural drawings designand specification including carriage of material with in all leads and lifts and other incidentals as per entire satification of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodised aluminium natural wooden shade of Jindal work shutters for doors windows & ventilators including providing and fixing hinges / pivots and making provisions for fixing of fittings with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up to gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/ panelling CP brass / stainless steel screws all complete as per architectural drawings designand specification including carriage of material with in all leads and lifts and other incidentals as per entire satification of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government..

Providing and fixing 12mm (Twelve millimetre) Thick Prelaminated board in matt finished ISI marked NO 12823 as per approved shade of viromica / kit ply / nona pan / green ply both side BWP phenol bonded exterior / interior grade panelled shutter with frame of first class Deodar wood including bright finished black enameled butt hinges with necessary screws 40 mm (Forty millimetre) thick shutter as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 40 mm (Forty millimetre) thick second class Deodar wood wire gauge shutters using galvanised MS wire gauge of IS gauge designation 85G with wire of dia 0.56 mm (Zero decimal five six millimetre) for doors, windows and clearstory windows including bright finished black enamelled iron hings with necessary screws complete in all respect with in all leads, lifts, carriage of material, other incidential charges complete as per Architectural Drawings and the direction of the Engineer-in-Charge .The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing glazing with glass pans of 4mm (four millimetre) thickness (weight not less than 10.00 kg/sqm (ten point zero zero kilogramme per square metre)) in aluminium door, window, ventilator shutters and partition etcetra with PVC/neoprens gaskets etcetra (Cost of aluminium snap beading shall be paid in basic item) complete in all respect with in all leads, lifts, carriage of material, other incidential charges complete as per Architectural Drawings and the direction of the Engineer-in-Charge .The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing glazing with glass pans of 6mm (six millimetre) thickness (weight not less than 13.75 kg/sqm (thirteen point seventy five kilogramme per square metre) in aluminium door, window, ventilator shutters and partition etcetra with PVC/neoprens gaskets etcetra (Cost of aluminium snap beading shall be paid in basic item) complete in all respect with in all leads, lifts, carriage of material, other incidential charges complete as per Architectural Drawings and the direction of the Engineer-in-Charge .The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 25mm (twenty five milimeter) thick pre laminated / MDF board in shelves / box for cup board with butt joints and fixing with nails and screws etc. complete as per PWD specification. complete in all respect with in all leads, lifts, carriage of material, other incidential charges complete as per Architectural Drawings and the direction of the Engineer-in-Charge .The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government..

Providing and fixing 19mm (Nineteen millimetre) thick MDF board water proof shutter for cup board including fixing with nickel plated piano hinges with screws etcetra, the all cup board portion of shutter shall be finished with 6mm (Six millimetre) thick hard wood edging with necessary screws as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminium grills (anodized transparent or dyed to required shade according to 15 :1868 with minimum anodiz coating of grade Az15 of approved design) pattern with approved standard section and fixed to existing window frame with C.P. brass/ stainless steel screws @ 200MM centre to centre including cutting the grill proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section arround the opening, all complete as per requirement and direction of Engineer-In-Charge ( only weight of grill to br measured for payment) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government. in steel frames of windows etc. with with round beaded bolts and nuts or by screw grill as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete. 300x16mm (Three hundred into sixteen milimeter) size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete. 250x16mm (Two hundred fifty into sixteen milimeter) size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete 250x10mm (Two hundred fifty into ten milimeter) size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete 150x10mm (One hundred fifty into ten milimeter) size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete.100x10mm (one hundred into ten milimeter) size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetera complete.125mm (one hundred twenty five milimeter) size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetera complete.100mm (one hundred milimeter) nominal size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing oxidized bright finished hard drawn M.S. hooks and eyes. 150mm (one hundred fifty) millimeter nominal size as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 65 x 35mm (sixty five into thirty five) millimeter special quality bright finished brass cup board locks or ward robe lock with six levers including necessary screws etc complete (Indian make of approved quality) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying eternity glazed viterified tiles 600x600x10mm (six hundred into six hundred into ten) millimeter in grey / coloured of Kajaria / Asian / Johnson & Johnson manufactured approved shade in flooring treads of steps and landing on a bed of 12mm thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing 4 mm (four milimetre) thick PU floor of Epoxy PIDIPOXY ESL of pidilite flooring comprising of flow fresh SL part A @ 1.2 kg/sqm ( one point two kilograme per square metre), flow fresh SL part B @ 1.24 kg/sqm ( one point two four kilograme per square metre) flowfresh SL filler @ 4.98 kg/sqm ( Four point nine eight kilograme per square metre) flowfresh SL PIGMENT @ 0.010 kg/sqm ( zero point zero one zero kilograme per square metre), high solid floor coating @ 1.04 kg/sqm ( one point two zero four kilograme per square metre), Epoxy coving @ 1.25 RMT/sqm ( one point two five per running metre) and pencil coving @0.021 Rmt/sqm ( zero point zero two one per running metre)as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 50mm (fifty) millimeter thick CC ironite flooring with metallic concrete hardner teking under layer of 35mm (thirty five) millimeter thick cement concrete 1:2:4 (one cement two sand 4 graded stone aggregate) 20mm (twenty) millimeter nominal size and top layer of 15cm (fifteen) centimeter thick metallic concrete hardner consisting of mix 1:2 (one cement hardener mix 2 stone aggregarte) 6mm (six) millimeter nominal size by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 ( four of cement : one part of metallic floor handening compound of approved quality by weight) including finishing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Cement plaster skriting 20mm (twenty millimetre) thick (upto any height) with cement mortar 1:3 (one cement : three sand) finished with a floating of neat cement including rounding of junction with floor complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying digital glazed viterified tiles 600x600x8mm (six hundred into six hundred into eight) millimeter in eternity HD in stain/stone finish of Kajaria / Asian / Johnson & Johnson manufactured grey / coloured of required shade in skirting, risers of steps and dados on 12mm thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 25mm (twenty five millimeter) thick Single piece Kota stone slab flooring 20mm (twenty millimeter) (average) thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeas per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Single piece Kota stone slab 25mm (twenty five millimeter) thick in risers of steps, skirting dado and pillars laid on 12mm (twelve millimeter) (average) thick cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Painting two coats with high Glossy 3D Epoxy paint for interior wall painting with epoxy paint roller brushes plian smooth finish composed of acrylic polymere in emulsion inorganic/special pigment sillceous aggregate antifungicides anti-rusting & foaming in two coats i/c necessary putty to give smooth even surface , sand papering smooth complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying marble work in flooring 20mm (Twenty millimetre) thick white makrana marble table rubbed laid over a base of 12 mm (Twelve millimetre) thick in cement mortar 1:3 including jointing with white cement mortar 1:2 (one cement : two marble dust) with an adimixture of pigment to match the shade of the marble complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying red sand stone slab in treads and risers of steps on a bed of 20mm (twenty milimetre) thick cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including preparing of nosing including rubbing and granite polish finish complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying spartic ceremic tiles 5.5mm (five point five millimetre) thick in in skirting dado (300 x 600mm) nominal size (three hundred into six hundred millimetre) treads of steps laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement three sand) finished with flush pointing in white cement as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Kota stone slab 25mm (twenty five millimeter) thick in risers of steps, skirting dado and pillars laid on 12mm (twelve millimeter) (average) thick cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing pre-painted sheet roofing of kotar metal single skin trapezoidal sheeting 0.60mm (sixty milimetre) thickness having 1060mm (one thousand sixty millimetre) cover width cover all width 1126mm (one thousand one hundred twenty six milimetre) , 28mm (twenty eight milimetre) crest depth at 353mm (three hundred fifty three millimetre) 2.50mm (two point fifty millimetre) the main crest with at top 25mm (twenty five) and at lower 81mm (eighty one milimetre) base metal of coil rolled steel coil with zinc waiting top coat with regular modified polysters coating of approved shade and balancing reverse coat with self topping screws 5.5mm (five decimal five millimetre) dia and 55mm (fifty five millimetre) length with EPDM seal complete in all respect as per approved drawing design and as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing pre-painted sheet ridge or hips 60cm (sixty centimetre) over all of kotar metal skin trapezoidal profiled sheeting 0.60mm (zero point sixty centimetre) cover with over all width 1126mm (one thousand one hundred twenty six) 28mm (twenty eight) crest depth at 353mm (three hundred fifty three) 2mm (two millimetre) C/C crest distance. There will be two ribs at the centre for stiffening heaving crest depth of 2.50mm (two point five millimetre) the main crest with at top zinc waiting top coat with regular modified polyster coating of approved shade and balancing reverse coat 5.5mm (five decimal five millimetre) dia and 55mm (fifty five millimetre) length with EPDM seal complete in all respect as per approved drawing design and as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing pre-painted sheet valleys 90cm (ninety centimetre) over all of kotar metal single skin trapezoidal profiled sheet 0.60cm (zero point sixty centimetre) thickness having 1060mm cover width over all width 1126mm (one thousand one hundred twenty six millimetre) 28mm (twenty eight millimetre) crest depth at 353mm +2mm (three hundred fifty three millimetre plus two millimetre) C/C crest distance. There will be two ribs at the centre for stiffening heaving crest depth of 2.5mm (two point five milimetre) . The main crest with at top 25mm (twenty five millimetre) and at lower 81mm (eighty one millimetre) base metal of cold rolled steel coil with zinc waiting top with regular modified polysters coating of approved shade and balancing EPDM seal complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing plaing M.S. B.P. sheet2.0mm (two millimetre) in eves board/ Facia / Sofit / Ceilling including cutting fixing jointing with gass/electric welding to steel roofs members and applying a coat of red lead primer complete as per PWD specification (frame work is to be measured paid for separately). as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 30cm(thirty centimetre) wide 25cm (twenty five centimetre) deep plain G.I. sheet gutter having 0.63mm thick sheet and fixed with bolts, nuts and washers etcetra. including making necessary connections with rain water pipe complete as per design as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-plast) rain water pipes of working pressure not less than 4.5 kg (four decimal five kilogram) per square centimeter including filling the joints with approved adhesive complete 100 mm (one hundred milimeter) dia as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete 110mm (one hundred ten milimeter) dia PVC plain bend as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete 110mm (one hundred ten milimeter) dia PVC plain shoes as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetre) diametre pipe MS holder bat clamps of approved design to CI ,SCI or PVC pipes embeded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimetre) of 1:2:4 (one cement : two sand : four stone aggregate 20mm (twenty millimetre) nominal size) and cost of cutting holes and making good the wall etcetra as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Steel work welded in built up sections composed in beams, joists, channels, angles, tees plated with connecting plates framed work with 40x6 mm (Forty into six millimetre) tees , flats, gratings, bars, ladders tcetra with connecting plates angles, cleats as in trusses and trussed purlins, main and cross beams, hips, jack rafters, purlins connect to common rafter and like work including cutting hoisting fixing in position & applying a priming coat of red lead paint completeas per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Painting two or more coats(excluding priming costs) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

6mm (six millimeter) cement plaster 1:3 (one cement isto three sand) in ceiling complete including curing completeas per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing cement bounded particial board 8 mm.thick (eight milimetre) particial board ceiling of approved quality with butt jointing and nails ( frame work and cover fillets to be paid for sepertely) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

15mm (fifteen milimeters) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimetewrs) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete including curing as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

15mm (fifteen milimeter) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimeters) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete including curing as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

15mm (fifteen milimeter) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimeters) in girth, in rough side with cement mortar 1:5 (one cement isto five sand) complete including curing as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Finishing wall with weather proof exterior emulsion of Ultrateck/ Spetrum Nerolac/ Asian paint of approved brand and manufacture on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Distempering (two coats) with oil bound washable distemper of Asian/ Nerloac brand and manufacture and of required shade on undecorated wall surfaces/ celling/ sloping roof to give an even shade over and including and priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Distempering (two coats) with synthetic washable distemper of Asian/ Nerolac brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including and priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Wall painting (two coats) with acrylic emulsion paint of Asian/ Nerolac brand and manufacture for interior grade on undacurated concrete/stone/plastered wall surface to give an even shade including throughly brushing the surface free from mortor dropping and other foreign matter and sand papering smooth including applying of putty as required for metaling the surfac complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P. Grabbar 40mm (forty milimetre) dia at 78cm (seventy eight centimetre) height with M.S. plate as per detail as the position of the seat and wash basin complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Prividing and fixing railing for stair case having baluster of 19x19mm (nineteen into nineteen millimetre) M.S. solid bars SWG-16 (Sixteen) gauge with a clear height of 85 cm (Eighty centimetre) @ 30 cm (thirty centimetre) center to center jointing in cement concrete steps and jointing with electric / gas welding at top along with hand rail of teak wood 6.25 x 7.50cm ( six poit two five into seven point five zero) vertical balusters welding/ jointed with each other with 2 (Two) Numbers MS flat of 37 x5 mm (thirty seven into five millimetre) complete with applying priniming coat of red lead paint complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Prividing and fixing railing for stair case having baluster of 25 mm( twenty five milimetre) Dia M.S. pipe with a clear height of 85 cm (Eighty centimetre) @ 60 cm (sixty centimetre) center to center jointing in cement concrete step and jointing with electric / gas welding at top along with hand rail of hollow MS pipe of 50 mm (fifty milimetre) dia(SWG-18) vertical baluste welding/ jointed with each other with 2 (two) Nos MS flat of 50x5 mm (fifty into five millimetre) complete with applying priniming coat of red lead paint complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (seventy five milimeters) thick bed of dry brick/stone aggregate 40mm (forty milimeters) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing plinth protection 50mm (fifty milimeters) thick cement concrete 1:3:6 (one cement isto three sand isto six aggregate) 20mm (twenty milimeters) nominal size cushed/broken stone aggregate including finishing the top surfaces of concrete smooth including curing comlete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Construction course rubble hammer dressed ‘U’ shape open surfaces drain with side wall 15x23cms ( fifteen into twenty three centimeters) in cement mortar 1:6 (one cement isto six sand) and inside plastering with cement plaster 1:3 (one cement isto three sand) including earth work and laying 10cm (Ten centimeters) cement concrete in 1:5:10 ( one cement isto five sand isto ten aggregate) 40mm (forty milimeters) nominal size and 7.5cm (seven decimal five centimeters) cement concrete 1:2:4 (one cement isto two sand isto four aggregate) 20mm (twenty milimeters) nominal size and finished with a floating cost of neat cement complete as per standard drawing and design including curing comlete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 10 cm (Ten centimetre) diametre M.S. pipe as per PWD specification complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Unistone 12mm.(twelve milimetre) cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 12mm. thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry including scaffolding extcetra as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Barium Sulphate plaster in walls including slab as to give final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing vitreous china water closet squatting pan (Indian Type W.C. Pan) big pan No 2071 of size 580 x 440mm (five hundred eighty into four hundred forty millimeter) with low lewel PVC Cistren of CERA(earth work, bed concrete, foot rest and trap to be measured and paid for separately) Orrissa Pattern as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing vitreous china wash, down water closet (European type W.C. Pan) N o 2061 universal WC of CERA with integral ‘P’ or ‘S’ trap including jointing the trap with soil pipe in cement mortar 1:1 (One Cement: One sand) Seat and cover to be measured and paid for separately) Anglo Indian (Universal closet)as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Orrisa pattern vitreous China water closet squatting pan ( Anglo Indian type W.C.pan)size 580mm (five hundred eighty millimetre) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimeter) size ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (one cement : one sand) sand cast ironas per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 10.00 (Ten) litres capacity P.V.C low level flushing cistern of CERA with a pair of G.I.or mild steel brackets complete with fittings such as lead valve less syphone 15mm (fifteen millimeter) nominal size bras ball valve with polythene float C.P. Brass handle unions and coupling for connections with inlet, outlet and overflow pipes, 40mm (forty millimeter) dia C.P. flush bend including cutting holes in walls and making good the same and connection the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing vitreous china wash basin No 1002 of 55x40cm (fifty five into forty centimetre) of CERA with double hole for pillar tap with C.I. or M.S. brackets painted white i/c cutting holes and making good the same including fitting (Flat back) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing vitreous china pedastal for wash basin No 1108 of CERA complete recessed at the back for the reception of pipes and fittings including entire carriage of materials within all leads and lifts and other incidentals, as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing vitreous china wash basin No 1012 (CANON) of 450x300MM (Four hundred fifty into three hundred milimetre) of CERA with double hole for pillar tap with C.I. or M.S. brackets painted white i/c cutting holes and making good the same including fitting (Flat back) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing heavy quality stainless steel kitchen sink with C.I. or M.S. brackets painted white i/c cutting holes and making good the same including fitting 600 x 450 X 150mm (six hundred into four hundred fifty into one hundred fifty millimetre) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) diameters C.P. brass waste ESS-ESS (Heavy duty make ISI marked NO-8931 & 8934) for wash basin or sink. as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) nominal size diameters rubber plug for wash basin sink,as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) nominal size diameters M.I. union for wash basin sink,as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) nominal size diameters PVC waste pipe for wash basin sink including check nuts, as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) nominal size diameters CP iron grating of ESS-ESS for nalhni trap complete, as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing of jet pressure of ESS-ESS for Europen seat with one meter tube of approved brand and manufacture,as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 600mmx450mm (six hundred millimeter into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on 6mm (six millimeter) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. screws and washers as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing brass towel rail of Ess- Ess complete with C.P. brass brackets fixed to wooden plugs with C.P. brass brackets fixed to wooden plugs with C.P. brass 600x20mm (Six hundred nto twenty millimetre) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing brass towel rail of Cat No. 4901 hotelier series of Ess- Ess complete with C.P. brass brackets fixed to wooden plugs with C.P. brass brackets fixed to wooden plugs with C.P. brass 750x20mm (Seven hundred fifty into twenty millimetre) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 600 x 120mm (Six hundred into one hundred twenty milimetres) glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws, as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish of ESS-ESS with C.P. brass brackets fixed to wooden cleats with C.P. brass screws, as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing chromium plated brass H923 soap dish with Acrylic Dish hotelier series of ESS-ESS with C.P. brass brackets fixed to wooden cleats with C.P. brass screws, as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diameters C.P. brass bib tap of ESS-ESS with capstan head, as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing canealed C.P. brass stop cock of ESS-ESS 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked No. 8931 & 8934)as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing C.P. brass pillar tap of ESS-ESS with capstan head 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked No. 8931 & 8934)as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen milimetre) dia PVC connection pipe brass union 450mm (four hundred fifty milimetre) length as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government..

Providing and placing water tank of makes (sintex) having capacity 1000 (one thousand ) litres each with necessary fitting including over flow pipes scour pipe and ball valve and with cover locking arrangement including providing pads of sizes as required for inlet and outlet and inside painting of good quality all complete as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) C.P. Brass full way valve with wheel of ESS-ESSas per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) C.P.brass ball valve of ESS-ESS ( Horizontal plunger type) high pressure with copper float nominal bore as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing polythene aluminum polythene ( PE-AL-PE) composite pressure pipe U.V. stabilized with carbon confirming to IS 15450-2004 of KITEC for water supply including clamps at one meter spacing, cutting fixing and making good the wall etc. but excluding the cost of fitting internal work pipe exposed on wall 1216-16 mm (Sixteen milimetre) O.D. as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 20mm (Twenty millimeters nominal bore/diameters to galvanized mild steel tubes (medium grade) in tenches including all tube fittings such as nipples, elbows, unions, tees and clamps (earth work trenches paid for seperately) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.e.

Providing and laying 15mm Fifteen millimeters nominal bore/diameters to galvanized mild steel tubes (medium grade) in tenches including all tube fittings such as nipples, elbows, unions, tees and clamps (earth work trenches paid for seperately) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) nominal size/diameter sand cast/cast iron spun spigot and socket soil, waste and ventilating pipes (lead caulked joints to be measured and paid for separately) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) nominal size/diameter sand cast/cast iron spun spigot and socket soil, waste and ventilating pipes (lead caulked joints to be measured and paid for separately)as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) nominal size/diameter sand cast iron/cast iron holder bat clamps including steel bolts to sand cast iron pipe embedded in and including cement concrete block 100x100x100 mm (One hundred into one hundred into one hundred) of cement concrete 1:2:4 (One cement isto two sand isto four graded stone aggregate 20mm (Twenty millimetre) size) including cost of making holes in wall and making good the wall as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimeter) nominal size/diameter sand cast iron/cast iron holder bat clamps including steel bolts to sand cast iron pipe embedded in and including cement concrete block 100x100x100 mm (One hundred into one hundred into one hundred) of cement concrete 1:2:4 (One cement isto two sand isto four graded stone aggregate 20mm (Twenty millimetre) size) including cost of making holes in wall and making good the wall as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing fixing sand 75mm dia (Seventy Fivemillimeter) millimeter) cast iron/cast iron spun fitting and plain bend with ovel access door insertion rubbed washer 3mm (three millimeter) thick bolt etcas per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing fixing 100mm dia (hundred millimeter) sand cast iron/cast iron spun fitting and plain bend with ovel access door insertion rubbed washer 3mm (three millimeter) thick bolt etcas per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing fixing 75mm dia (seventy millimeter) sand cast iron/cast iron fitting accessories singal equal branch of required dgree plain bend as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing fixing 100mm dia (hundred millimeter) sand cast iron/cast iron fitting accessories singal equal branch of required dgree plain bend as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing fixing 75mm dia (seventy millimeter) sand cast iron/cast iron fitting accessories double equal branch of required dgree as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing fixing 100mm dia (hundred millimeter)sand cast iron/cast iron fitting accessories double equal branch of required dgree as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing fixing 100mm dia (hundred millimeter)sand cast iron/cast iron fitting accessories single unequal branch of required dgree with heel rest bend as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing fixing75 mm dia (Seventy five millimetre) sand cast/cast iron coller including fittings as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing fixing 100mm dia (hundred millimetre) sand cast/cast iron colleras per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing fixing 75mm dia (seventy five millimetre)lead caulked joint to sand cast iron / cast (spun iron) pipe & fittings as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing fixing 100mm dia (one hundred millimetre)lead caulked joint to sand cast iron / cast (spun iron) pipe & fittings as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 110mm x 90mm (one hundred ten into ninty millimetre) nominal size PVC floor trap of self cleaaning design with approved design completeas per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern–I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 200mm (Two hundred milimetres) thick walls of brick masonry using cement dust clery building brick in cement mortar 1:3 (one cement: three sand) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Constructing brick masonry chamber for under ground CI inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement : five sand) cover with frame (light duty) 355mm x 610mm internal dimensions total weight of cover with frame to be not less then 38Kg. (weight of cover 23Kg. and weight of frame 15Kg) RCC top slab with 1:2:4 (one cement : two sand : four graded stone aggregate 20mm nominal size) foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40mm nominal size) in side plaster 15mm thick with cement mortar 1:3 (one cement : three sand) finished smooth with floating coat of neat cement on wall and bed concrete etc. complete. Inside dimension 455x610x450mm deep single pipe line. as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Excavation in drains and channels etcetra in earth work in all classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturator soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing stoneware pipe gully trap grade"A" compete with C.I. gratting brick masonry chamber in cement moratr 1:5 (One cement isto five sand) and water tight C.I. cover with frame of 300x300 mm (Three hundred into three hundred millimetre) size ( inside) the weight of cover to be not less than 4.53 Kg (Four decimal five three kilograms) and frame to be not less than 2.72 kg (Two decimal seven two kilograms) square mouth traps 150mmx100mm (One hundred fifty into one hundred millimetre) size P or R Type complete. as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm (Forty millimere) nominal size) in haunching of stoneware pipes of the 150 mm (One hundred fifty millimetre) internal diameters including concrete for bedding necessary form work and curing completeas per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying ( to level or slope) of PVC (D-plast) 110 mm (One hundred ten millimetre) sewer pipe of working pressure not less than 4.5 kg/sqm. (Four decimal five kilogrms per square metre) including filling the joints with approved adhesive completeas per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing H923 CP brass toilet paper holder without lid wall mounted hotelier series of Ess Ess completeas per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing viterious bowl pattern urinal no 5001 flat back type ( large) of size 430 x 260 x 350 mm (four hundred thirty into two hundred sixty into three hundred fifty ) of CERA including connection the urinal waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and paid sepertely)as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing vitreous china division plate No 5011 of CERA for urinal 600x300mm (six hundred into three hundred millimetre) completeas per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Solid Type white plastic sheet (Solid type) and cover for washed on water closet with CP brass hinges and rubber buffersas per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 5.00 ltr (five liter) capacity Vitreous chaina automatic flushing cistern with a pair of C.I. Or M.S. brackets complete with fitting including C.I. or mild steel brackets complete with fittings including C.I. Syphonic apparatus, mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 455X610mm( four hundred fifty five by six hundred ten millimeter) light duty rectangular Cast Iron manhole with frame cover weioght 38 kg ( thirty eight kilograme) single seat as per specifications, approved drawing , as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Kumar Associates