REPAIR AND REPLACEMENT OF STREET LIGHT AND OTHER ALLIED WORK AT SECTOR B AREA IN ARMY AREA JODHPUR

Amount

Repair to street light of any type by removing from existing position and refixing after repair including replacement of the following items complete all as specified and directed. (a) Electronic Driver suitable for existing LED light fittings (b) Surge Protector not less than 5 KV rating suitable for existing LED light fittings. Note : (i) Items mentioned at (a) & (b) above shall be measured and paid seperately under respective item supply only items. (ii) This item needs to taking down street light from pole to ground for replacement of parts.

All as item No. 1.00 but for high mast light fitting.

Labour only for making unserviceable street/security lights in serviceable, placed at pole only by disconnection / Isolating power supply either from pole junction box or by disconnecting overhead jumpers and carrying out de-carbonization / de-sulphation at connection points with overhead conductor / light fitting / junction box terminal including replacement connection wire complete all as required and as directed.Note : - (a) New cable as required shall be measured and paid separately under respective item under supply only item. (b) In case major components like surge protector, driver are requried to make the unserviceable light serviceable, the item of repair shall be measured under item ser No 1 & 2 above.

M&L as in replacement of steel structure, cross arms bracing supports ,clamps, back plates of any type, section incl. nuts, bolts, washers, welding ,bending cold or hot in any size and shape all as directed Including two coats of aluminium paints over a coat of red oxide primer incl preparation of surface complete all as specified and directed.

Restringing/refixing only of ACSR/ rabbit conductor of street / security light feeder including straightening properly on insulators and binding with aluminum taps /binding wire /conductor jumper of any size etc complete all as specified and directed. Note : - Single conductor shall be measured for length re-stringing.

M&L for 40 mm dia GI tubing medium grade in repairs incl. accessories for protection of cables on poles / under road crossing of following sizes.

All as Item No 6.00 but for 50 mm dia.

M&L as in replacement of XLPE insulated, armourd heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm 4 core complete all as specified and as directed.

M&L dismantling of brken unserviceable existing earthing with galvanised steel strip 32x6 mm and 10/8 SWG wire complete including removing of PCC complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrodes 600mmx600mmx6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron earthing strip 32mm x6mm thick by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of strata incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site. Note : (i) The cost of excavation & earth work in any type of strata as shown in electric plate no-3 in SSR Part-I shall be included in quoted rate of this item.

M&L for Auguring/driling/boring of holes under road , pavement, hard standing by trenchless technology by mannual/machine, suitable for laying of 40/50 mm dia GI pipecomplete all as specified and directed.

M&L for PCC (1:3:6) type C -2 using 40 mm graded stone aggregate for foundation of pole /struts/stay assembly etc complete all as specified and directed.

M&L for PCC (1:2:4) type B -1 using 20 mm graded stone aggregate for pedestal of poles/copping including necessary formwork, fair finishing to exposed surfaces without using extra cement complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and n.exc. 1.5m in depth for laying of cable and foundation in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m in depth upto 3.0 m for erection of poles, struts/stays, leveling of yard etc not exceeding 10 M² on plan and getting out in soft/loose soil.

Returning filling in and well ramming in layers n. exc. 25cm including spreading, leveling and watering all as specified and directed.

Removing excavated material (soil/rock) and depositing at a distance not exceeding 50m where directed.

M&L for sand cushioning to U/G cable for cushioning 8cm below the cable and 15cm above cable all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250 mm x 150 mm x 40 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables for protection.

S&F as in replacement of LED street light luminiare 45 watt, high performance with single die ceramic base high power LED light source, IP66 protection, PDC housing and aesthetic finless design and toughened glass cover and street light optics for lighting complete suitable to fix on 32 to 40mm dia brackets complete all as specified and as directed.

M&L for replacement of unserviceable MCB SP upto 2 Amp, 10 KA 240 Volt fixed complete all as specified and directed .

S&F as in replacement electric contactor three phase, 415 Volts, 50 Hz, upto 50 Amp load capacity suitable for street light timer box complete all as specified and directed.

S&F as in replacement electric contactor single phase, 230 Volt, 50 Hz, upto 40 Amps load capacity suitable for street light timer box complete all as specified and directed.

Supply only Electronic Driver Input Voltage Range 160V to 260V AC Single Phase 50 Hz and Output Voltage not exceeding 60V DC suitable for upto 30 Watt LED type fitting complete all as specifed and directed.

All as Item No 23.00 but suitable for 36/40 Watt LED type light fitting.

All as Item No 23.00 but suitable for 45/50 Watt LED type light fitting.

All as Item No 23.00 but suitable for 72/75 Watt LED type light fitting.

All as Item No 23.00 but suitable for 100 Watt LED type light fitting.

All as Item No 23.00 but suitable for 150 Watt LED type light fitting.

Supply only Surge protector not less then 5kV suitable for 25/30/35/36/45/50/72/75/100/150 Watt LED type light fittings complete all as specified and directed.

M&L for two coats of enamel synthetic silver paints over a one coat of red oxide to steel tubular pole/rail pole upto 9 mtr long and PCC coping with white paint complete all as specified and directed. Note : - The bottom of Pole upto height 1.50 mtr from pedastal shall be Zebra painting without any extra cost.

M&L for disconnecting and re-conecting of burnt LT XLPE cable to OH conductor on pole/ equipment including removing of faulty part of cable, preparation of cable for connection, suitable AL lugs, nut bolts etc and as directed on site by EIC. Note: The cost of earth work for taking out LT cable loop and refilling shall be included in qoted rate of this item.

M&L for writing pole number of minimum size 10 cm height with black paint over base of yellow paint on PCC/steel poles of LT/HT supply complete all as specified and directed.

M&L for ZEBRA painting of PCC/steel poles 9/11 m long alongwith road upto 1.5 m height from pedestal, with two coats of enamel synthetic paints in 30 cm height incl painting of pole coping with white paint complete all as specified and directed.

M&L for trimming and pruning of one complete tree up to a safe distance from the over head lines incl cutting branches of size not exceeding 80mm dia complete all as directed at site and disposal of branches/bushes to a distance and clearing the site all as specified and directed. Note:- 1. The necessary man power, tool & plant, cutting tools and JCB required for cutting/pruning of branches shall be included in the quoted rate of this item. 2. Proper shut down shall be taken by the authorised rep only. 3. One Job shall be considered for trimming/ prunning of one complete tree branches of given size.

S&F as in replacement of burnt / unserviceable timer switch, digital time Switch, Astronomical type 40 A 230V for (auto/manual) on and off , complete all as specified and directed.

S&F as in replacement of security light junction box of size 250×200×100 mm, weather proof, made out of Polycarbonate with glass fiber reinforced, IP 65 rated, Pole mounting type, along with connector for 3 phases and neutral and MCP SP 0.5 Amps rating incl power terminals 16 sqmm (06 Nos) and M32 cable glands suitable for 10/16sqmm x 2/3.5/4.0 core cable I/C & O/G (02 Nos) complete all as specified and directed.

S&F in replacement of copper cable 1100 volts grade PVC insulated and PVC sheathed wheather proof multistranded of size 1.5 sqmm, 3 core complete all as specified & directed.

M&L as in repair/replacement of PVC conduit 20 mm rigid non metallic including of all tee, bends, elbows etc including fixing accessories GI bracket of suitable size with nut bolts etc complete all as specified and directed.

S&F as in replacement of GI pipe Bracket of 32 / 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr incl 2 Nos. MS Clamp of flat iron of suitable size complete with nut , bolt, washers Including two coats of aluminium paints over a coat of red oxide primer all as specified and directed at site.

S&F as in replacement street light timer box having Astronomical type timer switch, digital time Switch, 40A, 230V for (auto/manual) on and off, electric contactor three phase, 415 Volts, 50 Hz, upto 50 Amp, MCB three phase 415V 63 Amps, three TPN connector for incoming and outgoing cable, cable gland of suitable size complete all as specified and directed

M&L as in replacement for prestressed cement concrete poles 9 M long of size 102 mm x 172 mm at top and 102 mm x 279 mm at bottom class-10, conforming to relavent latest IS including dismantling and refixing of cross arm, security light fittings, brackets or any other existing fittings etc connecting, testing including dismantling and removal of broken pole and coping complete all as specified and directed at site. Note:- (i) Earthwork, PCC shall be measured and paid separately under relevant item. (ii) The cost of removal of dismantled items from site shall be included inquoted rate of this item.

S&F as in replacement of pin type porcelain insulator, vitreous white brown or green including one galvanised mild steel spindle two GI washer and GI Nuts 100 mm height 65 mm dia for 1100 volts grade complete all as specified.

S&F as in replacement of shackle type porcelain vitreous white insulator 1100 volt grade 75 mm in height and 90 mm dia including galvanised mild steel strap of size 31mm x 3mm , 12 mm dia insulators bolts, washers and nuts complete all as specified and directed.

S&F as in replacement of garden/post light junction box of size 150x100x70 mm, weather proof, made out of polycarbonate with glass fiber reinforced, IP 65 rated, pole mounting type along with connector for 3 phases and neutral and MCB SP-0.5 Amps rating including power terminals 16 sqmm 06 Nos and M32 cable glands suitable for 10/16sqmm x 2/3.5/4.0 core cable I/C & O/G 02 Nos complete all as specified and directed at site.

LOKESH ELECTRICAL WORKS CONTRACTOR

M/s Vishaka Enterprises