REPAIR/REPLACEMENT OF JOINERY, FALSE CEILING, ROLLING SHUTTER, CURTAIN RODS AND WALL PANELING WORKS IN TECH AREA IN BRD AF STATION CHANDIGARH UNDER GE (AF) MC CHANDIGARH

Amount

Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down shutter of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Dismantling wrought iron or mild steel work in windows/ventilators of any description not otherwise provided for complete all as specified and directed.

S&F pressed steel frame for doors with one or more rebates of size 125 x 60mm made with steel sheet of 1.25mm thickness in and including necessary fixing lugs, hinges lock strike plate, tarring back of chowkhat & holdfast etc complete all as specified & directed .

S&F pressed steel frame for doors with one or more rebates of size 105 x 60mm made with steel sheet of 1.25mm thickness in and including necessary fixing lugs, hinges lock strike plate, tarring back of chowkhat & holdfast etc complete all as specified & directed .

M&L for providing cement concrete type C-0 (1:3:6) 12.5mm graded aggregate as in pressed steel door frame (backfill) complete all as specified & directed.

M&L for providing cement concrete type C-1 (1:3:6) 20mm graded aggregate as in hold fast, complete all as specified & directed.

S&F for 35 mm thick 2nd class hard wood factory made plain, framed paneled shutters (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutters) complete all as specified & directed .

Supply and fixing, 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, chemically treated against termite infestation, complete all as specified and directed

Supply and fix, Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, fixed in position in the opening, complete all as specified and directed.

Supply and fixing, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet 5mm thick to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing in SSR Part-II, complete all as specified and directed.

Material and labour for pre-laminated particle board, 18/19mm thick, interior grade, medium density, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

Material and labour for aluminium composite panel sheet of 4mm thick which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5mm thick aluminium foils with outer surfaces finished with 30 u PVDF and inner surface finished with a thin coat of polyester paint, fixed in panel to aluminium frame including all necessary frame work or powder coated snap beading and rubber basket complete all as specified and directed. Make :- Alstone/Alex panel/Armstrong/Euroboard

Material and labour for teak wood lipping 6mm thick fixed to 18/19mm board with nails, complete all as specified and directed.

Material and labour for powder coated aluminium (minimum thickness of polyester powder coating 50 micron) work for fixed frame portion and shutters of doors, sliding door (any track), openable windows, ventilators, partitions sliding/openable with extruded built up standard tubular section/appropriate Z section and other section conforming to IS : 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/neoprene gasket roller etc aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/gauged/paneling, CP brass/stainless steel screws, complete all as specified and directed.

Material and labour for Factory made box type steel window composite type with double rebated pressed steel frames 80 mm x 60mm (Peripheral) and 80x75mm (Intermediate members) made out of cold rolled 1.25mm thick sheet having steel window/ventilators shutter of MS tubular section of size 50mm x 20mm x 1.1mm thick fixed with box type hinges including 12mm x 3mm MS flat as beading for wire and putty for glazing shutter, handle of 100mm size made out of Z section 01 No, MS stove enameled black tower bolt of size 120mm 02 Nos, 150 mm mild steel hooks and eyes, each shutter flat iron 40mm x 1.25mm and 200mm long hold fasts 04 Nos each window , complete all as specified & directed.

Supply and fixing brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed.

Supply and fix in repair brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed.

Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

Supply and fix 5mm thick float glass, tinted/smoked shape fixed to frame for door/window/partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed.

Supply and fix, plain sheet glass 4.8mm thick, ordinary quality, exceeding 0.50Sqm in each pane fixed to aluminium door/window and iron frame including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed.

Supply and fix, plain sheet glass 4mm thick, ordinary quality, not exceeding 0.50Sqm in each pane fixed to aluminium door/window and iron frame including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed.

Supply and fix in repair plain sheet glass 3mm thick, ordinary quality, not exceeding 0.50Sqm in each pane, and glazing with oil putty and securing pins, spring clips etc, complete all as specified and directed.

Supply and fix 140mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Supply and fix in repair 140mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Supply and fixing Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Supply and fix in repair Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Supply and fix 180mm size powder coated (any tint) aluminium "American Handle" fixed to aluminium door with suitable screws, complete all as specified and directed.

Supply and fix in repair 180mm size powder coated (any tint) aluminium "American Handle" fixed to aluminium door with suitable screws, complete all as specified and directed.

Supply and fix Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

Supply and fix in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

Supply and fix for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

Supply and fix in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

Supply and fix in repair 100mm mild steel helical door spring including necessary welding where ever required, complete all as specified and directed.

Supply and fix aluminium powder coated grill (DECO grill) fixed to aluminium window/ventilator frame including all fixing arrangements including channels, screws, U or F section etc, complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Material and labour, applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed.

Supply and fix, butt hinges, 100mm long, medium weight, cold rolled mild steel, bright finished, complete all as specified and directed.

Supply and fix, butt hinges, 100mm long, extruded aluminiumalloy with galvanised mild steel hinge pin, complete all as specified and directed.

Supply and fix, Aluminium alloy, anodised, sliding door bolts 200mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.

Supply and fixing, Aluminium anodized handle 100mm long, extruded, fabricated type, powder coated, complete all as specified and directed.

Supply and Fixing, Aluminium anodised, barrel tower bolts 200mm long, powder coated, of extruded section and fixed, complete all as specified and directed.

Supply and Fix in repair, powder coated door seal fixed with screws to any type of shutter , complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6), on brick/concrete surfaces of walls, finished even and smooth without using extra cement including taking down cement plaster and removal outside the MoD land distance exceeding 2.5Km but n.exc 3Km, complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls, stopping of surfaces, leveling/edging the disturbed places using a thin layer of wall care putty and applying two coats of 1st quality oil bound distemper (oil emulsion) over and including a coat of alkali resistant primer, complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4), on brick/concrete surfaces of walls, finished even and smooth without using extra cement including taking down cement plaster and removal outside the MoD land distance exceeding 2.5Km but n.exc 3Km, complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Material and labour for repairing any type of aluminium/wooden door shutter and refixing in the same opening after resecuring its frame work by means of tightening with new screws of by aluminium angle cleat , complete all as specified and directed.

Material and labour for repairing any type of aluminium/wooden window shutter and refixing in the same opening after resecuring its frame work by means of tightening with new screws of by aluminium angle cleat , complete all as specified and directed.

Supply and Fixing, Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

Supply and Fixing Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed.

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed.

Material and labour for 12mm thick glass reinforced gypsum (GRG) ceiling tiles of size 595 x 595mm of approved design fixed with powder coated (powder coating on web bottom only) GI grid consisting of main Tee section of size (25mm x 30mm), cross Tee section of size (15mm x 23mm) and powder coated GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x 595mm with 4mm dia GI wire suspender, GI adjustable rod of 4mm dia with butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T-section shall be centre black prepainted with polyester paint and having a load bearing capacity of 12Kg/Sqm including taking down old false ceiling, complete all as specified and directed. Make : Diamond Brand TM/ Dexune/Everest

Supply and fix in repair powder coated GI grid consisting tee section of minimum size (24mmx32mm) Fixed in existing false ceiling at any height, complete all as specified and directed.

Supply and fix in repair powder coated GI grid consisting wall angle of minimum size (20mmx20mm) Fixed in existing false ceiling at any height, complete all as specified and directed.

Supply and fix in repair mild steel curtain rod chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Supply and fix in repair aluminium anodised curtain rod chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, staging etc.and removal outside the MoD land distance exceeding 2.5Km but n.exc 3Km and stacking of useful bricks/brickbats for reuse or credit, complete all as specified and directed

Material and labour, brick work with fly ash bricks straight or curved on plan exceeding 6m mean radius, built in CM (1:6), complete all as specified and directed.

Material and labour, brickwork with using retrieved subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4), but except bricks, complete all as specified and directed. Note : Old serviceable bricks retrieved from demolition vide srl item No 60 here-in-before shall be reused after proper cleaning & washing etc.

M&L for dismantling mild steel rolling shutters, doors gates and the like complete all as specified and directed.

S&F 1.25mm thick steel rolling shutters without ball bearing of push pull or manual type as specified, including top cover, anchoring rod, hasp & staple and one shop coat of primer and two coats of synthetic enamel paint; erected in position as indicated complete all as specified and directed.

S&F 1.25 mm thick steel rolling shutters without ball bearing or gear operated type with bevel gear box and crank handle as specified, including top cover, anchoring rod, hasp & staple and one shop coat of primer and two coats of synthetic enamel paint; erected in position as indicated complete all as specified and directed.

M&L for Overhauling, servicing and realignment of rolling shutters of area n.exc 12 sqm including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc including cleaning, oiling and greasing of moveable parts and welding work complete all as specified and as directed. Note:- Necessary arrangement of crane/moving ladder shall be made by contractor without any extra cost.

M&L for Overhauling, servicing and realignment of rolling shutters of area exc 12 sqm but n.exc. 25Sqm including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc including cleaning, oiling and greasing of moveable parts and welding work complete all as specified and as directed. Note:- Necessary arrangement of crane/moving ladder shall be made by contractor without any extra cost.

M&L for replacement of existing unserviceable mild steel wheel gear box with new wheel gear box of suitable for large size shutters having area more than 8 sqm including its crank handle as per existing size and shape complete all as specified and directed..

M &L for Glazed ceramic coloured tiles in vertical surface 300mmx 450mmx 7mm thick set and jointed in neat cement of required shape and size as in skirting/dado etc set and jointed in neat cement slurry over & incl 10 mm thick rendering in CM 1:4 and pointed in white or coloured cement to match including dismantling of existing tiles and removal outside the MoD land distance exceeding 2.5Km but n.exc 3Km complete all as specified and directed. Make : SOMANY/Johnson & Johnson/Kajaria/Orient

M &L for Glazed ceramic coloured tiles in vertical surface 300mmx 200mmx 7mm thick set and jointed in neat cement of required shape and size set and jointed in neat cement slurry over & incl 10 mm thick rendering in CM 1:4 and pointed in white or coloured cement to match including dismantling of existing tiles and removal outside the MoD land distance exceeding 2.5Km but n.exc 3Km complete all as specified and directed. Make : SOMANY/Johnson & Johnson/Kajaria/Orient

M & L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed CM 1:6 including dismantling of existing tiles and removal outside the MoD land distance exceeding 2.5Km but n.exc 3Km complete all as specified and directed. Make SOMANY/KAJARIA/ JOHNSON & JOHNSON.

Note:- Amount of credit of Rs.42405.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

MS FUTEC ENGINEERS

FORTUNE STAR

KUMAR AND COMPANY

shree balaji builders

M/s Matloob Ahmed