REPAIR AND MAINT TO INTERNAL ELECTRIFICATION SYSTEM AND DBs, MCCBs, EARTHING, SERVICE CABLE AND CONNECTED WORKS AT CG COMPLEX, DORAHA AND PHILLAUR UNDER GE LUDHIANA

Amount

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

Taking down the existing unserviceable main switch/cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after cutting chases in wall/ceiling etc, heavy duty ISI marked, with GI Modular sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps.

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

One bell point controlled by one bell switch 5 Amps.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 4 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

All as per item No 4 above but with stranded copper conductor 4 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One bell point controlled by one bell switch 5 Amps.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 7 here in before but using 2.5 sqmm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed.

All as per item No 7 above but with stranded copper conductor 4 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

S&F in replacement of Modular switch one way 6 Amps, 1 module complete all as specified and as directed.

S&F in replacement of Modular switch one way 16 Amps, 1 module, with neon indicator complete all as specified and as directed.

S&F in replacement of celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified and as directed.

S&F in replacement of modular step type fan regulator 120 watt two module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed.

S&F in replacement of Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified and as directed.

S&F in replacement of Modular socket, 6/16Amps, 2/3 pin combination 2 module complete all as specified and as directed.

S&F in replacement of modular Bell push modular 6 Amps single module complete all as specified and as directed.

Suply and fix in replacement of Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and as directed.

S& F in replacement of lamp holder, PVC body of brass suitable for batten fitting complete all as specified and as directed.

M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps.

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 19 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed.

All as per item No 19 above but with stranded copper conductor 4 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps.

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 22 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed.

S&F in replacement of Switch piano flush type, single pole, one way, 5/6 Amp complete all as specified and as directed.

S&F in replacement of Switch piano flush type, single pole, one way, and 15/16 Amp complete all as specified and as directed.

S&F in replacement of Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified and as directed.

S&F in replacement of Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, piano flush type complete all as specified and as directed.

S&F in replacement of Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and as directed.

S&F in replacement of replacemnt step type fan regulator 120 watt suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S&F in replacement of Bell push, 6 Amps single complete all as specified and as directed.

S&F in replacement of Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified and as directed.

S&F in replacement of Switch piano flush type, single pole, one way, and 6 Amp complete all as specified and as directed.

S&F in replacement of Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified and as directed.

S&F in replacement of TPN phase segregated distribution board double door vertical type 6 way 415 volts, 50Hz suitable for MCCB incommer IP 43 protection on wall/ floor with necessary cement work and electrical connections complete all as specified and as directed.

S&F in replacement of TPN phase segregated distribution board double door vertical type 4 way 415 volts, 50Hz suitable for MCCB incommer IP 43 protection on wall/ floor with necessary cement work and electrical connections complete all as specified and as directed.

S&F in replacement of sheet metal enclosureVertical TPN DB suitable for MCCB Incomer 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S& F in replacement of sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S& F in replacement of sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F MCCB TPN 4 pole 415 volts 16 KA suitable for fixing on DB of capacity of current rating 100 Amps with adjustable thermal and microprocesser release with extended terminals complete all as specified and as directed.

S& F MCCB TPN 4 pole 415 volts 16 KA suitable for fixing on DB of capacity of current rating 63 Amps with adjustable thermal and microprocesser release with extended terminals complete all as specified and as directed.

S& F MCCB TPN 4 pole 415 volts 16 KA suitable for fixing on DB of capacity of current rating 40 Amps with adjustable thermal and microprocesser release with extended terminals complete all as specified and as directed.

S&F for MCB triple pole and neutral rated capacity 63 A, 415V breaking capacity 10 KA complete all as specified and as directed.

S&F for MCB Single pole and neutral rated capacity 40 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

S& F for MCB Single pole and neutral rated capacity 32 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

S&F for MCB Single pole rated capacity 5 to 32 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 2.5 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 2.5 sqmm cable, one run of 2.5 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit, including taking down old wiring complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable, one run of 4 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit, including taking down old wiring complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit, including taking down old wiring complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 10 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 10 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 10 sqmm cable, one run of 10 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit, including taking down old wiring complete all as specified and directed.

S & F in replacement of LED 8/10 watt 2 feet white 85lm/W 6500K batten extruded with decorative end caps complete all as specified and as directed.

S& F in replacement of LED Bollard 8 W Cone NXG LED Bollard series acts as an imposing treet furniture with touch of aesthetic. Innovative design with uniformly lit diffuser at the upper portion acts as beacon of path guidance in a landscape environment with robust IP 65 rating with PCC (1:2:4) foundation complete all as specified and as directed.

S&F in replacement of Highly efficient LED 9W inverter bulb B22 CDL, 100 lm/W used as a ready replacement for existing LED direct fit lamp complete all as specified and as directed.

S&F in replacement of fan capacitor 2.5 Mfd, 230 Volts incl PVC clams complete all as specified and as directed.

Supply and fix in replacement of LED Bollard fitted garden light fittings 10 W,240V 50 Hz rated input with PCC (1:2:4) foundation higher energy saving LED lighting fixture with environment friendly,energy efficient complete all as specified and as directed.

S&F in replacement of LED downlight surface mounted luminare round type 12/18 watts 6500K with inbult driver and polycarbonate opal diffuser white finish operating voltage 230V AC, 50 Hz complete all as specified and as directed.

S & F in replacement of LED down light recess mounted luminare, square type 15/18 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz all as per complete all as specified and as directed.

S&F in replacement of energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire 100 lm/W with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb and removal old existing unsv tube light fitting complete all as specified and as directed.

S&F in replacement of Solar LED pathway lights waterproof outdoor modern led walkway path ighting for garden round 80 cmcomplete all as specified and as directed.

S&F in replacement of LED 3 W spot light round, Recess mounted downlighter with pressure die-cast aluminium heat sink & clear PC as a cover in white powder coated finish with independent electronic LED driver LED Spot 3W 3000K complete all as specified and as directed.

Supply and fix in replacement of post top lantern LED type 20/25 watt 230 watt volts AC outdoor type with decorativepost top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

Supply and fix in replacement of post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorativepost top for 360 degree indirect light IP 66 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

S&F in replacement of wall mounted LED 3/6 watts bed side lamp fitting with necessary electrical connections complete all as specified and as directed.

S&F in replacement of Decorative wall light fixture made up of Polycarbonate, suitable for 9 W LED lamp B22 base with unbreakable globe suitable for LED bulb and including provosion of inverter LED bulb 9/10 watts complete all as specified and as directed.

Supply and fix in replacement of LED lights fitting 1x 20W, 230V, 100 lm/W AC decorative box type with driver, holder including LED tube light CRCA housing battens are equipped with specially designed Extruded aluminium heat sink, Milky white PC diffuser and Elegantly designed white colored ABS endcaps to enhance the aesthethetics of the luminaire. with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed.

S&F in replacement of recess mounted 2' x 2' square LED panel 36 watts, 6500K, 100 lm/W Ultra morden designed Modular High Efficancy LED luminaire with specialized High transmittance duel/multi layer prismatic optics for glare free symmetric light distribution offering excellent visual comfort with UGR levels of less than 19. luminaires suitable for Armstrong/Grid ceiling and most wide range of applications having multiple driver options like CISPR 15 compliance, Flicker-free operation, <5% THD complete all as specified and as directed.

S&F in replacement of new generation energy saving and environmental friendly long life LED street light capacity 25 watts made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom Opening seperate driver compartment with IP 66 protection 160 lm/W and impact resistance of IK08 and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.0 mtr long bend to required shape with clamps, nut, bolts complete all as specified and as directed.

S&F in replacement of Decorative hanging luminaire with decorative glass shade with suitable holder for LED bulb and provosion of LED inverter bulb 10 watts complete all as specified and as directed.

S&F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 4 module including removal of old unserviceable onecomplete all as specified and as directed.

S&F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 6 module including removal of old unserviceable one complete all as specified and as directed.

S&F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 8 module including removal of old unserviceable one complete all as specified and as directed.

S&F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 12 module including removal of old unserviceable one complete all as specified and as directed.

S&F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 18 module including removal of old unserviceable one complete all as specified and as directed.

S&F modular plates white colour with frame of 2 module including removal of old unserviceable one complete complete all as specified and as directed.

S&F modular plates white colour with frame of 4 module including removal of old unserviceable one complete complete all as specified and as directed.

S & F modular plates white colour with frame of 6 module including removal of old unserviceable one complete complete all as specified and as directed.

S & F modular plates white colour with frame of 8 module including removal of old unserviceable one complete complete all as specified and as directed.

S & F modular plates white colour with frame of 12 module including removal of old unserviceable one complete ccomplete all as specified and as directed.

S & F modular plates white colour with frame of 18 module including removal of old unserviceable one complete complete all as specified and as directed

S & F casing and capping size 40 mm including removal of old unserviceable one complete complete all as specified and as directed.

S & F casing and capping size 25 mm including removal of old unserviceable one complete complete all as specified and as directed.

S & F casing and capping size 20 mm including removal of old unserviceable one complete complete all as specified and as directed.

S & F modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply including removal of old unserviceable one complete all as specified and as directed.

Supply and fix in replacement single core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and as directed.

Supply and fix in replacement single core cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and as directed.

Supply and fix in replacement single core cable PVC insulated and unsheathed multistranded copper conductor of size 4 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and as directed.

Supply and fix in replacementsingle core cable PVC insulated and unsheathed multistranded copper conductor of size 6 Sqmm from sub main wiring including removal old existing unserviceable one complete all as specified and as directed.

Fixing only light fitting of any type obtained from item No 4,7,19 and 22 with necessary electrical connections complete all as specified and as directed.

S&F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed.

M &L Earthing including earth work complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm bore means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm bore upto 3mtr above ground level along poles fixed with two clamps of 25mm, 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6, C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

M/S SEALINE BUILDERS (BID ID -3416091)

SUN MANN ENGINEERS (BID ID -3409565)

PK ENTERPRISES (BID ID -3415520)

M/s Bansi Lal (BID ID -3410628)

PAWAN KUMAR GOVT. CONTRACTORS (BID ID -3416584)