PETTY REPAIR/DAY TO DAY MAINT WORKS INCL REP/REPLACEMENT TO JOINARY , PLUMBING ,SANITARING , ROOF ,PLASTERING AND OTHER ALLIED CONNECTED BLDG REPAIR WORKS IN AREA III AND OTHER AREAS MD ACCN OF AGE B/R-I(N) AMBALA CANTT

Amount

M&l for attending to day to day complain of cleaning of kitchen, drain, bathroom sewage line including cleaning of frist man holes mechanically by safaiasela provided with all protection devices including transportion to site on all working day from 9.00 hrs to 17.00 hrs. Payment to this items will only be process at only production of document related to line A/C payment there service provider,complete all as specified and as directed by the Engineer-in charge.

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces of any description finished even and smooth without using extra cement including taking down existing plaster,complete all as specified and as directed by the Engineer-in charge.

M&L for 15mm thick rendering in cement mortar 1:4 on other than fair faces brick or concrete surfaces of any description finished even and smooth without using extra cement including taking down existing plaster,complete all as specified and as directed by the Engineer-in charge.

M&L for rendring 10mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces on ceiling including taking down existing plaster complete all as specified and as directed by the Engineer-in charge.

M&L for preparing of new surface of walls, plastered or unplastered applying two oil bound distemper over a coat of 2 to 3 mm thick wall care putty complete all as specified and as directed by the Engineer-in-Charge.

Complete removal of existing treatment and two coats of oil emulsion distemper including avg 2mm thick wall care putty complete all as specified and as directed by the Engineer-in charge.

M&L for preparing new surface of ceiling, plastered or unplastered and three coat of white washing on undecorated surface of ceiling complete all as specified and as directed by the Engineer-in charge.

M&L for preparation of old surfaces on ceiling and applying one coats of white wash complete all as specified and as directed by the Engineer-in charge.

M&L for preparing of new surface of walls, plastered or unplastered two coat of cement base paint, white or tinted complete all as specified and as directed by the Engineer-in charge.

M&L for preparing old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed by the Engineer-in charge.

M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper including a layer of 2-3mm putty,complete all as specified and as directed by the Engineer-in charge.

M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6mmean radius in built in cement mortar 1:6 complete all as specified including demolition of existing brickwork and complete all as specified and as directed by the Engineer-in charge.

S & F steel window ( box type ) glazed and gauged using ERW hollow 'P' section double frame jointed internally with 25x3mm complete as per TD- 219(c) sheet 1/3 to 3/3 with side hung shutter including butt binges, steel handles and steel peg stay, towel bolt & guard bars complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer as specified including taking out existing windows complete all as specified and as directed by the Engineer-in charge.

S&F box type ventilators glazed/gauged including MS grills of square section 8mm dia @ 100 c/c completes with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primerr including taking out existing ventilator complete all as specified and as directed by the Engineer-in charge.

S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to GDE Fe410-W(Gde E-250 quality-B) complete all as specified and as directed by the Engineer-in-Charge

S & F 35mm thick, 2nd class HW, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated including taking out existing door complete all as specified and as directed by the Engineer-in-Charge

S&F35 mm thick, 2nd class Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats including taking out existing door complete all as specified and as direced by the Engineer-in-charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing including taking out existing door complete all as specified and as directed by the Engineer-in-Charge.

S & F 100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by the Engineer-in-Charge

S & F MS butt hinges 100 mm long medium weight and fixed complete all as specified and as directed by the Engineer-in charge.

Supply and fixing for 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed by the Engineer-in-Charge.

All as per item Sr No 22 as above but in repair, complete all as specified and as directed by the Engineer-in charge.

S & F 150mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge

All as per item Sr No 1.24 as above but in repair, complete all as specified and as directed by the Engineer-in charge.

S & F 200mm long aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge.

All as per item Sr No 1.26 as above but in repair, complete all as specified and as directed by the Engineer-in charge.

Supply and fixing for 300mm long mild steel ordinary rat tail rod pattern springs for doors including roller and roller plate complete all as specified and as directed by the Engineer-in-Charge

All as per item Sr No 1.28 as above but in repair, complete all as specified and as directed by the Engineer-in charge.

M&L for Small fitting such a brackets of any type ,latch and hinge block , shaped door and window stops and the like including all necessary labours articles n. exc 200 Cu cm each complete all as specified and as directed by the Engineer-in charge.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 or Gde E-165 complete all as specified and as directed by the Engineer-in-Charge

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engineer-in-Charge.

S & F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvalinised wire staples complete all as specified and as directed by the Engineer-in-Charge

S& Fixed in repair mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire stapple, or complete all as specified and as direced by the Engineer-in-charge.

M & L for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified including haking out old glass.

M & L for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

S & F for 3.0mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

Supply and fix in repair decorative type 20 mm dia MS powder coated curtain rod complete with fancy type caps and end brackets complete all as specified and as directed by the Engineer-in charge.

M&L for prepration of new wooden surface and apply two coat of synthetic enamel paint over a coat of pink primer surface of any description , not otherwise described over 10cm width or girth complete all as specified and as directed by the Engineer-in-Charge.

M&L for prepration of old wooden surface and apply two coat of synthetic enamel paint of any description , not otherwise described over 10cm width or girth complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new steel surface applying two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer on steel or iron surfaces of description over 10cm in width or grith, not otherwise described complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of Old steel surface applying two coat of synthetic enamel on steel or iron surfaces of description over 10cm in width or grith, not otherwise described complete all as specified and as directed by the Engineer-in-Charge.

M & L for running welding in repairs, Thickness of metal to be welded N exc 6mm, complete all as specified and as directed by the Engineer-in-Charge

S & F In repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and as directed by the Engineer-in-Charge

M&L for 16 to 18 mm thick MDF board prelaminated MDF board , exterier grade (grade-1) confirming IS 14587, fixed with nails for kitchen cupboard and cabinet ,self for cupboard , frame with door if required including 3mm thick 2nd class hardwood leeping patti on cut edge of boards in repair complete all as specified and directed.( Make-green ply, Century, Asis)

S&F 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixing to wooden frame complete all as specified and as directed by the Engineer-in charge.

S&F magnet catcher fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and as directed by the Engineer-in charge.

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed by the Engineer-in-Charge

M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed by the Engineer-in-Charge

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed by the Engineer-in-Charge

S&F in repair vitreous china white wash hand basin flat back white in colour with pedestal ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 type complete all as specified and as directed by the Engineer-in charge.

S & F in repair ISI marked waste coupling fittings 32mm dia of brass, chromium plated for glazed ware sink, basins etc. with long screwed shanks and fly nuts flange end bedded in red lead cement complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs of ISI marked fancy type Pillar Tap of 15mm bore dia, chromium plated, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge. Make: Prayag/Parryware/Hindware / cera / Essco.

S & F in repair Swan Neck, Left Hand Operating Knob Pillar Tap of 15mm bore dia, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge. Make -Prayag/Hindware/Parryware / cera / Essco.

S/F in repair WHB mixer brass chromium plated hot and cold complete all as specified and as directed by the Engineer-in charge. of Make -Prayag/Hindware/Parryware / cera / Essco.

S/F in repair wall mixer brass chromium plated hot and cold complete all as specified and as directed by the Engineer-in charge.of Make -Prayag/Hindware/Parryware / cera / Essco.

Supply and fixing in repair Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe). Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as direced by the Engineer-in-charge.Make: Prayag/Parryware/Hindware / cera / Essco.

Supply and fixing repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe).Wash down water closet (Pedestal pattern), complete all as specified and as direced by the Engineer-in-charge.Make: Prayag/Parryware/Hindware / cera / Essco.

Supply only plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed by the Engineer-in charge. Make: Prayag/Parryware/Hindware / cera / Essco.

S&F in repair jet spray CP with flexible pipe complete all as specified and as directed by the Engineer-in charge. Make - Prayag/Hindware/Parryware / cera / Essco.

Supply and fixing in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets .Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern. Flushing cistern and flushing pipe (exclusive of brackets), fixed in repairs complete all as specified and as direced by the Engineer-in-charge.Make: Prayag/Parryware/Hindware / cera / Essco.

Supply and fixing in repairs of 15mm bore Stop valves, brass chromium plated screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (conncelaed type) complete all as specified and as direced by the Engineer-in-charge. Make -Prayag/Hindware/Parryware / cera / Essco.

S&F for 15mm dia angular cock of brass chromium plated, with long shank and cup screwed down high pressure, with crutch or butterfly handle complete all as specified and as directed by the Engineer-in charge. Make -Prayag/Hindware/Parryware / cera / Essco.

S&F in repair for ISI marked 15mm bore dia fancy type Bib taps, chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as direced by the Engineer-in-charge. Make -Prayag/Hindware/Parryware / cera / Essco.

S&F in repair for ISI marked 15mm bore dia fancy type Bib taps long body chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as direced by the Engineer-in-charge. Make -Prayag/Hindware/Parryware / cera / Essco.

S/F in repair hand health faucet complete all as specified and as directed by the Engineer-in charge. of make Make -Prayag/Hindware/Parryware / cera / Essco.

S & F in repair 15mm size PVC connections with PTMP nuts of length 450mm complete all as specified and as directed by the Engineer-in-Charge

S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and as directed by the Engineer-in charge.

S&F in repair CP Soap dish 100mmx50mm complete all as specified and as directed by the Engineer-in charge. Make - Prayag/Hindware/Parryware / cera / Essco.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and as direced by the Engineer-in-charge.Make - Prayag/Hindware/Parryware / cera / Essco.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge Make - Prayag/Hindware/Parryware / cera / Essco.

S&F in repair Kitchen plate rack of steel 1mm thickness size 900 x 900x 250mm Ofof weight not less than 8 Kgs complete all as specified and as directed by the Engineer-in charge.. Make - Prayag/Neelkanth/Jayana

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge. Make - Prayag/Neelkanth/Jayana

S/F in repair fancy type cabinet mirror complete all as specified and as directed by the Engineer-in charge of make Prayag/Parryware/ Hindware.

S & F in repair shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and as directed by the Engineer-in-Charge

M & L in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge

S & F in repair grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and as directed by the Engineer-in-Charge

Material & Labour for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, including taking out existing watertank complete, all as specified and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White.Make: sintex , shital

Material & Labour for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, including taking out existing watertank complete, all as specified and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White.Make: sintex , shital

S & F of for ISI Marked 20mm dia Ball valves high pressure of brass with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including taking out existing pipes complete all as specified and as directed by the Engineer-in-Charge

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including taking out existing pipes complete all as specified and as directed by the Engineer-in-Charge

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in charge.

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in charge.

M&L 75mm thick PCC 1:4:8 type D2 as in sub base of floor including demolition of existing PCC complete all as specified and as directed by the Engineer-in charge.

M&L for Vitrified tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match inculding 15mm thick screed bed in cm 1:4. including dismantling of existing tiles .Make- kajaria, Johnson somany, orient

M & L for Glazed Coloured Ceramic tiles in vertical surface exceeding 0.11 sqm but not exceeding 0.18 sqm thick set and joint in neat cement slury and pointed in white or colour cement to match incl 10 mm thick cement plaster in cm 1:4 including dismantling of existing tiles complete all as specified and as directed by the Engineer-in charge.Make- kajaria, Johnson somany, orient

M & L for providing PCC 1:2:4 type B1 using 20mm graded aggregate as in landings, precast cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete with joints to match, except blocks or slabs including demolition of cement concrete complete all as specified and as directed by the Engineer-in-Charge.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge

Excavating in trenches n'exc 1.5 m width and n'exc 1.5 m in depth for foundation etc n'exc 10 sqm on plan and n'exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by the Engineer-in charge.

M & L for concrete bed in PCC 1:3:6 type C2 (using 20 mm graded stone aggregate) to drain pipes including packing under,and haunching against the sides of pipes, after they are laid and tested for 100 mm dia (internal) PVC (SWR) pipes complete all as specified and as directed by the Engineer-in charge. (Pipes shall be measured & paid separately).

M & L 100 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in charge.

Returning filling in including spreading levelling and watering and well ramming in layers not exc 25 cm complete all as specified and as directed by the Engineer-in charge.

Removing excavated material exc 250 m but n exc 500 m distance and depositing complete all as specified and as directed by the Engineer-in charge.

M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc tank exc 250 Ltr and N exc 500Ltr complete all as specified and as directed by the Engineer-in-Charge.

Supplying and fixing door seal in wooden shutters including nails etc complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of brick tiles single layer laid on roofs etc complete all as specified and as directed by the Engineer-in-Charge.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by the Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and as directed by the Engineer-in-Charge.

M & L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed by the Engineer-in-Charge.

M & L for brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and as directed by the Engineer-in-Charge.

Material & Labour for providing cement concrete 1:2:4 Type B1 using 20mm graded crushed stone aggregate as in roof kerbs, mud stops , padding or filling roof depressions finished even and smooth with out using extra cement etc, complete all as specified and as directed by the Engineer-in-Charge.

Material & Labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, complete, all as specified and as directed by the Engineer-in-Charge.

Material & Labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bitumious primer @ 0.40 ltr /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25'C temprature and viscosity 70-160 cps over the primer coat with overlap of 100mm at the at the side and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete as per standred practice as per manufacture's instructions . The vital physical and chemical parameters of the membrane shell be under ;- (i) Joint strength in longitudinal and transverse direction at 23'C at 650/ 450 N /5 cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150'C when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only complete all as specified and as directed by the Engineer-in-Charge.

M&L 40mm thick Brick tiles laid over and including 15mm thick layer of screed bed of cement mortar 1:6 and joints grouted with 5 % of crude oil by weight of cement complete all as specified and as directed by the Engineer-in-Charge.

All as per Srl item No 1.09 above but except bricks and -ditto- complete all as specified and as directed by the Engineer-in-Charge.

Replacement of existing unserviceable helical wire spring 8 gauge helical wire spring complete all as specified and as directed by the Engineer-in charge.

Overhauling serviceing and realignment of rolling shutters any size including replacement of defective bearing and grinding of wheels for smooth movement of doors , replacement of clamps, bolts etc including cleaning oiling and greasing of moveable parts and welding work complete all as specified and as directed by the Engineer-in charge. Note :- Necessary arrrangement of crane/moveing ladder shell be made by the contractor.

Replacement of existing unserviceable mild wheel gear box with new wheel gear box of suitable for large size shutters having area more then 8 sqm incl ite handle as per existing size complete all as specified and as directed by the Engineer-in charge.

Sawhney Constructions

Swami Enterprises

bhagwandasswazirchand