SPECIAL REPAIRS TO DOORS OF HQ SNC BLDG NO P 222 AND PROVN OF DEFICIENT TOILETS FOR WOMEN SAILORS AT ATC BLDG NO P 04 INS GARUDA NAVAL BASE KOCHI UNDER GE NW KOCHI

Amount

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation in soft/loose soil complete all as specified and as directed.

Returning/filling in layers and ramming in layers around pile cap,plinth beam etc using excavated soil incl sprading, levelling, well ramming in layers not less than 25cm thick. complete all as specified and as directed.

Removing excavated material outside MD land by own arrangement of contractor complete all as specified and directed

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed

M&L for PCC 1:2:4 Type B0 using 12.50mm graded stone aggregate as in damp proofing course complete all as specified and as directed.

M&L for 75 mm thick Plain Cement Concrete 1:3:6, Type C-1, (20mm graded stone aggregate) as in plinth protection and finished the surface even and fair without using extra cement, complete all as specified and directed.

M&L for RCC 1:1.5:3 (Nominal mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs and mass concrete complete all as specified and as directed

M&L for RCC 1:1.5:3 (Nominal mix) using 20mm graded stone aggregate for Columns, piers, pillars and struts complete all as specified and as directed

M&L for RCC 1:1.5:3 (Nominal mix) using 20mm graded stone aggregate for beams, cantlivers, lintels etc complete all as specified and as directed

M&L for RCC 1:1.5:3 (Nominal mix) using 20mm graded aggregate for chajja complete all as specified and as directed

Use and waste of form work to to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finshed surfaces complete all as specified and as directed

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat fair finished surfaces complete all as specified and as directed

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions rectangular fair finished surfaces complete all as specified and as directed

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for flat fair finished surfaces of concrete (Horizontal or sloping) complete all as specified and as directed

Material and labour for TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed

All as above item no.15 but 5mm dia an over upto including 10mm dia in stirrups, spacers and binders complete all as specified and as directed

M&L for TMT bars in reinforcement 6 to 8mm dia including cut to length , bend to required shape , cranking /hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and as directed

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and as directed by engineer in charge

M&L for hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thickness watered and rammed to a true surface complete all as specified and as directed

M&L for providing 100mm thick plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in floors to receive top layer complete all as specified and as directed

M&L for ATT for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed

M& L for ATT for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed

M& L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate), complete all as specified and as directed

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls Type C1, 1:3:6 set in CM 1:4 (using 20mm graded stone aggregate), complete all as specified and as directed by Engr-in Charge

M& L for 10mmm thick cement plaster in CM 1:6 on fair surfaces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement all as specified and directed

M&L for rendering 8mm thick cement plaster in CM 1:4 with wpc @3% by weight finished even and fair without using extra cement over 12mm thick backing coat on brick or concrete wall surfaces with cement mortar (1:6) complete all as specified and as directed Note : WPC shall be measured and paid seperately

M & L for 5 mm thick rendering in cement mortar 1:3 on fair faces of of ceiling surfaces finished even and smooth complete all as specified and as directed

Supply only Integral waterproofing compound

M&L for two coats of antifungal paint over a coat of exterior primer over exterior sealant base coat on plastered surfaces of wall including preparation of newly plastered surfaces complete all as specified and as directed.

M & L for preparation of new wall surfaces and applying three coats of white wash all as specified.

M&L for preparation of new decorated surfaces of ceiling and applying three coat of white wash complete all as specified and as directed

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.11 Sqm but not exceeding 0.36 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including provision of screed bed in cement mortar 10 mm thick in CM (1:4) all as specified and directed. Note : The quoted rate shall be inclusive of screed bed

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including provision of backing coat 10 mm thick in CM (1:3) complete all as specified. Note : The quoted rate shall be inclusive of backing coat

Supply and fix PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Ltrs capacity including flush pipe PVC connections etc complete all as specified and as directed

Supply and fix vitreous China wash down water closet (pedestal pattern) white with and including seat and cover (including fixing bolts), trap set in and including concrete and connection to drain and flush pipe complete all as specified and as directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed

S&F PVC (SWR) pipes, single socketed, in any length, with rubber ring joint 110mm dia laid in trenches or in floor complete all as specified and directed

S&F of PVC (SWR) pipes 75mm dia single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors complete all as specified and directed

Supply and fix vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets,PVC connection and waste pipe complete all as specified and directed

Supply and fix pillar taps fancy type cast copper alloys, with capstan heads fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe suitable for 15 mm bore pipe complete all as specified and as directed.

M & L for Precast cement concrete cover slab type B-1, 1:2:4 using 20mm graded stone aggregate and set in cement mortar 1:6 complete all as specified

S&F for powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

S&F powder coated anodised aluminium window and ventilator shutter powder coated side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of gradeAC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S&F 4mm thick frosted glass one side frosted ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each plane complete all as specifed and as directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed

S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed

Supply and fix stainless steel butt hinges medium weight size 100mm size complete all as specified and as directed

Supply and fix aluminium anodised barrel tower bolt extruded section of 150 mm long complete all as specified and as directed

Supply and fix extruded aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and as directed

Supply and fix 250mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed

S&F aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed

S&F Toilet paper holder, vitreous China, box type fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed

S &F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming tofe -410W (gd E-250) quality A complete all as specified and as directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet MP Tile pattern, 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed

M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed .

S & F EURO GUARD PRO SQUARE UPVC RAINWATER GUTTER (160 MM), with all necessary fittings, clamp, joints, end cap, corner drop, centre drop, etc joining compounds, nut, bolts or screws etc and fixing in position, at any height complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls (jointing shall be done with solvent cement) complete all as specified and as directed .

S & F PVC (SWR) bends, any radius, 110mm bore all as specified, complete all as specified and as directed .

S&F anodised aluminum snap grid false ceiling comprising of 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with stainless steel screws; having grid of size 605mmx605mm, including hangers 6 mm dia. GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia. 40 mm long , complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Soft /loose soil complete all as specified and directed.

M&L for 100mm thick cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and as directed by Engineer - in -Charge.

M&L for Hard core of Gauge exc. 63mm but n. exc 150mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled / rammed to a true surface complete all as specified and as directed by Engineer - in- Charge.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size as approved confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment,over and including 50mm thick coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling in layers n exc. 25cm thick and add for well ramming including watering as required complete all as specified and as directed.

M&L for PCC type B-0, 1:2:4 (12.50mm graded stone aggregate) as in concrete around the machine pressed pre cast concrete paver block or chamfered on edges all as specified and as directed by Engineer - in - Charge.

M&L for reinforced cement concrete pipe 150mm bore class NP2 laid and jointed complete with collars complete all as specified and as directed.

M&L for concrete bed to 150mm drain pipe with cement concrete 1:3:6 type C2 incl packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and as directed.

S&F RCC Hume pipe septic tank for 25 users designed to carry sewage and sullage water, including excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete all as shown in Drg no. TD/A/157 sheet no. 1/1 and complete all as specified and directed

S&F Soakage pit 25 User of dia 1.60m, depth 1.50m as shown on drg No.TD/A/161 sht No.1/1. complete all as specified and as directed by Engr - in Charge.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed

S&F 2nd class hard wood solid striaght chowkhats & door frames, rebated on the solid, rounded or chamferred put together with glue pinned at joints complete all as specified and as directed.

S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges shall be paid separately)

S & F sheet glasses,plain 4.00mm thick glazing all with glazing clip & rubber gaskets etc n exc 0.5 sqm in each pane complete all as specified and directed.

S & F 100mm Butt hinges cast brass hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed.

S&F Brass Mortice lock,with handle 240mm lock body eco pin cylinder 70mm knob from inside & with 3 keys complete all as specified and directed.

S&F door closer, hydraulically regulated, designation No. 3, universal type suitable for door shutters of weight between 61 to 80 Kg with aluminium (die cast) body, fixed ll as specified and directed by Engineer-in-Charge.

S&F Floor door stopper of brass body and tongue with hard drawn steel spring fixed in floor (overall length of cover plate 140mm) complete all as specified and directed.

M & L for preparation & complete removal of existing treatment on internal surfaces of walls, and applying 2 mm thick wall care putty on old plastered surfaces, preparatory to distempering & applying two coats of distemper oil emulsion over a coat of primer all as specified and directed by Engineer in charge

M & L for preparation of newly plastered internal surfaces of wall and applying one coat of wall care putty 1mm thick on new wall surfaces & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer all as specified and directed by Engineer in charge

Supply and fix on wall/concealed on wall high pressure CPVC pipes of size 40 mm dia , SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents complete all as specified and directed.

All as per item No 87 here-in-before but of size 25 mm dia complete all as specified and directed.

All as per item No 87 here-in-before but of size 20 mm dia complete all as specified and directed.

Supply and fix CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

Supply and fix CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed

Supply and fixing of Bib tap CP, Quarter turn with flange and areator, fancy type Long body cast copper alloy with crutch or butterfly handle screwed for GI/cpvc pipe of size 15mm , complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F1099152 of Cera or its equivalent make from the list of makes)

Supply and fixing of Bib cock , CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F2008151 of Cera or its equivalent make from the list of makes)

Supply and fixing 15mm angle valve,quater turn with flange, with flange type chromium plated for fixing with CPVC pipe complete specified and as directed by the Engineer-in-charge.(Make : Model No: F1016201 of Cera or its equivalent make from the list of makes.)

Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe ,all as per specified and directed (Make : Model No: F8030109AB of Cera or its equivalent make from the list of makes)

M&L for concealed stop cock with adjustable wall flange all as per site requirement as directed. Make : CERA Model No. F2002362 or its equivalent make from the list of makes)

Supply and fixing of swivel overhead shower of PTMT any colour with shower arm 15 mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe and all as specified and as directed by the Engineer -in-Charge. Cat Part No. F7020108AB of Cera or its equivalent make from the list of makes

Supply and fixing two way angle cock with flange 15 mm, chromium plated for fixing with CPVC pipe complete specified and as directed by the Engineer-in-charge.(Make : Model No: F1017211 of Cera or its equivalent make from the list of makes.)

S&F Wall Mixer (3-in-1) with arrangement of both Telephonic Shower and Over Head Shower, with 210mm long bend pipe, complete all as specified and as directed by the Engineer in Charge. Make : CERA Model No. F1015403 or its equivalent make from the list of makes

S&F float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut complete all as specified and directed.

Supply and fixing of Rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 2000 liters Note: 3 layered structure, white PVC tank.

Supply and fixing Geyser Connection Pipe, 12 mm dia, 450 mm length (outer 450mm long cold water and complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed by the Engineer-in-charge. Make Cera Model F8070403 or its equivalent make from the list of makes

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat ,NRV, connection piece etc complete all as specified and directed. Note : Unserviceable geyser deposite to MES Yard all as specified and directed by the engineer-in-charge

M&L , point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLS cable 1100 Volts grade ISI-694 marked with valid CML No. single core multistranded cable in and including medium grade surface PVC conduit not less than 20mm dia and accessories ISI marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and with modular switch boxes and PVC modular cover plate of suitable size for fixing of switches sockets and fan regulators etc. including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLS cable single core multistranded cable as earth continuity wire all as specified and as directed for the following:- One light point controlled by one switch complete all as specified and as directed by Engineer-in-Charge.

All as above item no.104 but one fan point / exhaust fan point controlled by one switch & regulator complete all as specified and as directed

All as per item No 104 above but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure complete all as specified and as directed by Engineer-in-Charge.

S&F modular switch 1 way 6 Amps,1 module complete all as specified and as directed

S&F Ceiling rose, 3 phase /PVC / polycarbonate, isolated body complete all as specified and as directed by Engineer-in-Charge.

Supply & fix Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, complete all as specified and as directed by Engineer-in-Charge. Make of batten : Havells Cat Part No. REGALBATTENT8UPTO1X22WSSBSWH Make of tube rod : Havells Cat Part No. CRYSTALT81213SSTL20WLED865SGLASS or its equivalent make from the list of makes

Supply and fix LED mirror light 1 x 10W/12W Watt Wall/Surface mounted luminaries with engineering plastic housing, wired with all accessories complete incl provn of flexible copper wire from ceiling rose to light fitting terminal complete all as specified and as directed by Engineer-in-Charge. Make- Make :Crompton Cat No. LDL-10-WW or its equivalent make from the list of makes

Supply and fixing building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 30 Watt Crompton Cat Part No. LSTP-100-CDL-M or its equivalent make from the list of makes including suitable GI bracket of 25 mm dia and fixing arrangement on walls complete all as specified and as directed by Engineer-in-Charge.

S&F Sheet metal enclosures with socket plug top and MCB' single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB complete all as specified and as directed by Engineer-in-Charge.

S&F SPN sheet metal enclosure for DB 8 ways Double door complete all as specified and as directed by Engineer-in-Charge.

S&F MCB 'B' Curve 63 Amp TP ,240 Volts complete all as specified and as directed by Engineer-in-Charge. Make L&T Cat Part No. BB30630B or its equivalent make from the list of makes

S&F MCB 'B' Curve 40 Amp SPN ,240 Volts complete all as specified and as directed by Engineer-in-Charge. Make L&T Cat Part No. BB20400B or its equivalent make from the list of makes

S&F MCB 'B' Curve SP 6 To 32 Amp , 240 Volts, complete all as specified and as directed by Engineer-in-Charge. Make : L&T Cat Part No. BB10060B to BB10320B or its equivalent make from the list of makes

S&F 250 mm sweep, PVC body exhaust fan heavy duty, single phase 230 Volts, complete all as specified and as directed by Engineer-in-Charge.Make: Havells Cat Part No. Ventil Air-DX white or its equivalent make from the list of makes

M&L sub main wiring with 2 single core 4 Sqmm PVC insulated unsheathed multi stranded copper conductor cable 1100 volt grade drawn through and including PVC rigid conduit concealed wiring including necessary PVC conduit specials including chases cutting complete except beam and RCC roof and one run of 4 Sqmm PVC insulated unsheathed single core 1100 volts grade multi stranded copper conductor cable as earth continuity conductor and connecting with suitable size thimble complete all as specified and as directed by Engineer-in-Charge. Note: two run of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No 119 but 2 single core 6 Sqmm PVC copper conductor including 1 runs of 6 Sqmm copper conductor as earth wire complete all as specified and as directed by Engineer-in-Charge. Note: two run of 6 sqmm size PVC cable , one run of 6 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No 119 but 2 single core 10 Sqmm PVC copper conductor including 1 runs of 10 Sqmm copper conductor as earth wire complete all as specified and as directed by Engineer-in-Charge. Note: two run of 10 sqmm size PVC cable , one run of 10 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

Supply and Fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 Sqmm 2 core complete all as specified and as directed by Engineer-in-Charge.

M&L in repair earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meters below normal ground level, connected to GI earth strip 25x4 mm upto length 7.5 mtr by means of bolts, nuts and washers of galvanised steel all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and indicated including testing on completion including taking out old earthing complete. Note : The rate is deemed to be inclusive of the cost of complete earth work in any type of soil. PCC 1:3:6 type C-1 for chamber, RCC 1:2:4 type B1 for cover slab 50 mm thick, reinforcement 8 mm CTD bars @ 100 mm c/c both way, necessary form work, handle, charcoal dust 20mm dia GI med grade for watering and 40mm dia GI med grade earth lead protection pipes with funnel and wire mesh all complete all as specified and as directed by Engineer-in-Charge.

Supply and fix soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed

Taking down cement plaster on brick/ concrete walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

Supply and fix PVC(SWR) floor trap of 75mm outlet dia with grating including jointing with solvent cement complete all as specified and directed

POOJA ENGINEERING WORKS (BID ID -3360759)

Vidya constructions (BID ID -3360294)