Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.3 LAccepted-AOC 47 A SHIKARGARH ARMY AREA JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹16.6 L+₹1.2 L (7.73%)Rejected-Finance 19 PAOTA C IIIRD ROAD JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-Finance Being not Lowest | |
| 3 | L3₹23.2 L+₹7.7 L (50.0%)Rejected-Finance | L3 | Rejected-Finance Being not Lowest | |
| 4 | L4₹24.5 L+₹9.0 L (58.3%)Rejected-Finance | L4 | Rejected-Finance Being not Lowest |
Tender Value
₹18.3 L
EMD Value
₹36,600
Closing Date
24 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JODHPUR
HQ CWE AF JODHPUR 342011 Rajasthan
WIDENING OF K2 LINK UNDER GE AF JODHPUR
2023_MES_602748_1
86030/E8
Open Tender
Construction Works
Item Rate
180 days
GE AF JODHPUR
As per NIT
8 documents required · 8 mandatory
₹500
GE AF JODHPUR
₹36,600
Yes
8 Aug 2023
12 Jun 2023
26 Jul 2023
12 Jun 2023
24 Jul 2023
10 Jul 2023
Amount
Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil complete all as specified and directed.
Removing excavated soil n. Exc 50m and depositing where dierected at a level n exc. 1.5 m above the starting point complete all as specified and directed
Demoliation of Brickwork or stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles
Demoliation of RCC in roofs, floors beams, staircases, landing, chajjas and similar suspended work completed all as specified and directed.
Taking dwon chowkats or frams with shutters (without taking off shutters from the frams) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified and directed by Engr-in-charge.
Taking dwon chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from sitec
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified and directed by the Engr-in-charge.
Excavating in trenches, n exc 1.5 m wide and exc 1.5m in depth n exc 3.00m; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified and directed by the Engr-in-charge.
M&L PCC 1:4:8 type D-2 (using 40mm grade stone aggregate) as in foundation, filling and mass concrete specified and directed.
M&L 75 mm thick PCC 1:4:8 type D-2 As in floor complete all as specified and directed
M&L for Squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and directed.
M&L for Pre-cast cement concrete1:2:4 type B1 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, completed all as specified and directed
M & L for TMT bars 10mm dia and over, cut to length bent or shape required incl crancking, bending spirally for hooping for columns, hooking ends and binding with and securing with clips quality conf to TMT bar all as specified and directed.
M & L for TMT bars 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete completed all as specified and directed
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete completed all as specified and directed
M&L for formwork to edges of concrete flats, treads, breaks in floors, openings in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work exc 10cm but n exc 20cm wide completed all as specified and directed
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete completed all as specified and directed
M & L for formwork to sides and soffits floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for RCC M-25 (design mix) (using 20mm stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete completed all as specified and directed.
M&L for RCC M-25 (design mix) (using 20mm stone aggregate) in columns, pillars, piers, posts and struts completed all as specified and directed.
M&L for RCC M-25 (design mix) (using 20mm stone aggregate) in beams, cantilevers, bressummers, over 1.5m span completed all as specified and directed.
M&L for RCC M-25 (design mix) (using 20mm stone aggregate) in Chajja completed all as specified and directed.
M&L for RCC M-25 (design mix) (using 20mm stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like completed all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-charge.
M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
M&L for 75 mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in plinth protection complete all as specified and directed.
M& L Rendering 15mm thick in CM (1:4) on sotne masnory including finish even and smooth surfaces using without extra cement all as specified and directed.
M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) completed all as specified and directed
M&L for rendering 5mm thick in CM 1:3 on fair concrete surfaces in ceiling finished even and smooth (without using extra cement) completed all as specified and directed
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed 15mm in CM 1:4 (overall thickness of stone & scree 40mm) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete completed all as specified and directed
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick plaster (in CM 1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L for preparing undecorated newly plastered surfaces of ceiling and apply three coat of white wash completed all as specified and directed
M&L preparing undecorated newly plastered surfaces of wall and apply two coat of distemper oil emulsion over one coat of wall primer over 3mm thick wall care putty all as specified with approved colour completed all as specified and directed
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces completed all as specified and directed
S & F anodised aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc. completed all as specified and directed.
S & F anodised aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) window and ventilator shutters side hung type without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium fitting such as pec stays 150mm long(1No.) hinges type B-21 100mm long (2no.) suitable handle (1 no.) complete all as specified.
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples completed all as specified and directed
S&F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane completed all as specified and directed
M&L for preparing new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including a coat of diluted elastomeric self primer and reinforcement fabric sheet as per manufacturer’s instruction to stop leakage / seepage from roof / wall complete all as specified and directed by the Engineer-in-charge.
M&L for 10mm thick rendering in Cement Mortar 1:3 with water proofing compound @ 3% by weight of cement, on existing concrete surfaces on roof, finishing even and smooth without using extra cement complete all as specified & directed. (Note : water proofing compound measured sapertely)
Supply only integral water proofing compound complete all as specified & directed.
M&L for Non Skid joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed.
S&F for 75mm dia PVC (SWR) pipes single socket fixed in walls and floors or trenches complete all as specified and directed.
S&F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches including taking down complete all as specified and directed.
S&F for 25mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specified and directed.
S&F for 20mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specified and directed.
S&F for 15mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks of capacity 500 Ltr (cylindrical vertical with closed top) including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) hoisted and fixed in position all as specified and directed.
S&F for Gun metal gate valve 20mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and as directed.
S&F for vitreous china wash basin white flat back size 550x400mm including brackets cutting for and prinning in ends of brackets or erecting stand incl PTMT waste coupling fitting 32mm lonjg dia complete all as specified and directed.
S&F for vitreous china wash down water coset pan white (padesal pattern) including PVC white seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed
S&F for PVC valve less, syphonic action type, flushing cistern, low level, white 10 ltr of capicity including inlet ball valve float and handle including brackets complete all as specified.
S&F for 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 complete in all as specified and directed.
S&F 15mm fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete in all as specified and directed.
S&F for 15mm bore fancy type Stop valves, cast copper alloy chromium plated screwed down high pressure, angle valve with crutch of butterfly handle, screwed both ends for iron pipe for unions complete all as specified.
S&F 15mm dia Bib taps, cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed with both ends for iron pipe or for brass ferrule and complete all as specified and directed.
S&F for 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
M & L for 30mm thick sand stone slabs, set and jointed over joists, etc, complete all as specified
S&F for Control bldg (frangile hut) with toilet of size 4.32 x 1.83 M per Drg Sep/PRG03/HUT/20 Sheet 1/1 dt 17.08.2022 made up of 50mm thick GRP sandwich panel including all structural and joinery work complete all as specified and directed. Drg no. Sep/PRG03/HUT/20 Sheet 1/1 dt 17.08.2022 shall be read in conjuction with particular specifications for Frangible Hut.
Supply and Fixing of 25 mm bore steel water tubing bore medium grade galvanised including tube fillings such as Tees,Sockets, bends, elbows,union,nipple etc with screwed and socketed joints laid in trenches/under floor/under road or laid in floors complete all as specified.
Supply and Fixing of 20 mm bore steel water tubing bore medium grade galvanised including tube fillings such as Tees,Sockets, bends, elbows,union,nipple etc with screwed and socketed joints laid in trenches/under floor/under road or laid in floors complete all as specified.
Supply and Fixing 25 mm bore Gun metal,globe or gate valve with iron wheel head,screwed both end for iron pipe complete all as specified and directed.
Supply and Fixing 20 mm bore Gun metal,globe or gate valve with iron wheel head,screwed both end for iron pipe all as specified and directed.
Taking Branch connection from Existing pipe linw,including necessary earth work,Tail piece socket or tees as required at site(The Rate quoted shall include cost of Excavation fitting/fixture required for taking branch connection)
M&L point wiring with 1.5sqmm PVC insulated 1100 volt grade IS -694 FRLS multi stranded but unsheathed copper conductor cable drawing in PVC casing capping and terminated in existing terminal box with 3 mm thick plastic laminated sheet cover for fixing of switches,sockets and fan regulator including continuous earth wire with copper cable S/C 1.5 sq mm similar description of main cable connected to main earth dully complete all as specified and directed by Engineer in Charge. (a) one light/ fan/Exhaust fan point controlled by one switch.
(b) -do- as above but for 5 amp socket on same board
(c) -do- as above but for 5 amp socket on independent board
(d) All as per item above but with 2.5 Sq mm cable for Independent one 6 pin 5/15 Amps socket outlet In and including 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire.
S&F switch piano 5 amps flush type single pole one way
S&F switch piano 16 amps flush type single pole one way
S&F socket outlet 2 in 1, 3 pin5 amp
S&F socket outlet 2 in 1, 3 pin 5 and 15 amp flush type
Supply and fix Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body.
S & F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43-IK with reversal double door, recess mounted, having insulated 200 amp tinned copper bus bar , neutral bus bar, earth bar, din bar detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 8 ways.
S & F MCB SP, 6 to 32 Amp, 10 KA, 'Ç' curve in the MCB DB complete with connection testing and commissioning.
S & F 240V, MCB SPN 32 Amp, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing wall mounted fans complete with blades, 230 V, 400 mm sweep.
M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normalless'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, precast RCC 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than4.00 Kg/Square metre) with PCC frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm mmbore midium grade GI protection pipe, test point etc complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.
Om Trading Corporation
Savitri Enterprises
M/s Pal Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .