REPAIR AND REPLACEMENT OF GI CI PIPE LINES VALVE AND OTHER ALLIED WORKS IN OTM ACCN AT MIL STN RAIWALA AND NARENDRA NAGAR UNDER AGE I RAIWALA

Amount

Excavation in trenches in hard /dense soil n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation laying of pipe etc n.exc 10 sqmm on plan and n.exc 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge

Returning filling in including spreading levelling watering and well ramming in layers not.exc 25cm each layers complete all as specified and as directed by Engineer-in-charge

Removal of excavated material & surplus spoil to a distance n.exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge

Taking up cast iron water mains of 100mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge

All as per above item No 4 above but 150mm bore complete all as specified and as directed by Engineer-in-charge

All as per above item No 4 above but 200mm bore complete all as specified and as directed by Engineer-in-charge

All as per above item No 4 above but 300mm bore complete all as specified and as directed by Engineer-in-charge

Cutting to cast iron pipes of 80mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge

All as per above item No 8 above but 100mm borecomplete all as specified and as directed by Engineer-in-charge

All as per above item No 8 above but 150mm bore complete all as specified and as directed by Engineer-in-charge

All as per above item No 8 above but 200mm bore complete all as specified and as directed by Engineer-in-charge

All as per above item No 8 above but 300mm bore complete all as specified and as directed by Engineer-in-charge

Supply and fix ductile iron spun pipes of 100 mm bore with flange end centrifugally cast class K-7, conforming toIS:8329 ISI marked in any length laid in trenches complete with gaskets/ nut bolts all as specified and as directed by Engineer-in-charge

All as per above item No 13 above but 150mm bore complete all as specified and as directed by Engineer-in-charge

All as per above item No 13 here-in-before but 200mm bore Class K-9 complete all as specified and as directed by Engineer-in-charge

S&F in repairs ductile iron fittings flang and socketed / all socketed / all flanged type such as bend upto 300mm bore (any type radious and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, 'Y' junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs complete all as specified and as directed by Engineer-in-charge. Note :- excavation earth work and run lead joints, tighten joints, rubber gasket shall be measured and paid seperately.

S&F in repairs unserviceable cast iron fittings flang and socketed / all socketed / all flanged type such as bend upto 300 mm bore (any type radious and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, 'Y' junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs complete all as specified and as directed by Engineer-in-charge. Note :- excavation earth work and run lead joints, rubber gasket shall be measured and paid seperately.

S&F testing and connecting cast iron sluice valve heavy duty double flanged, 300 mm dia PN 1.6 confirming to IS 14846: 2000 ISI marked with Stainless steel spindle and two nos of MS flange of 16mm thick, 8 holes with nuts and bolts packing materials complete including cutting the existing watermain for fixing cast steel sluice valve and jointing welding complete required at site of water supply installations complete all as specified and directed. Make:- Kirloskar/L&T/Bir/ Zoloto

All as per above item No 18 above but 200mm bore complete all as specified and as directed by Engg-in-Charge.

All as per above item No 18 above but 150mm bore complete all as specified and as directed by Engg-in-Charge.

All as per above item No 18 above but 100mm bore complete all as specified and as directed by Engg-in-Charge.

All as per above item No 18 above but 80mm bore complete all as specified and as directed by Engg-in-Charge.

S&F jointing to cast iron pipe of size 300mm bore spigot and socket by run lead joints including spun yarn and caulking of lead joints complete all as specified and as directed by Engineer-in-charge

All as per above item No 23 above but 200mm bore complete all as specified and as directed by Engg-in-Charge.

All as per above item No 23 above but 150mm bore complete all as specified and as directed by Engg-in-Charge.

All as per above item No 23 above but 100mm bore complete all as specified and as directed by Engg-in-Charge.

All as per above item No 23 above but 80mm bore complete all as specified and as directed by Engg-in-Charge.

Taking up or down existing GI pipe 80mm dia from trenches / walls / roof / floor etc including connection and cleaning for refixing or removal and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge.

All as per above item No 28 above but size 50mm bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 28 here-in-before but size 40mm bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 28 here-in-before but size 25mm bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 28 here-in-before but size 20mm bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 28 here-in-before but size 15mm bore complete all as specified and as directed by Engineer-in-charge.

S&F GI tubing medium grade 80mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge. Make- Swastik / Jindal / TATA

All as per above item No 34 above but size 50mm dia bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 34 above but size 40mm dia bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 34 above but size 25 mm dia bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 34 above but size 20 mm dia bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 34 above but size 15 mm dia bore complete all as specified and as directed by Engineer-in-charge.

Cutting and screwing to existing MS / GI steel tubing for alteration or addition to pipe line of 40 to 50mm bore with new fittings and fixtures complete all as specified and directed by Engineer-in-charge.

All as per above item No 40 here-in-before but size 80mm dia bore complete all as specified and directed by Engineer-in-charge.

S&F in repair gun metal globe or gate valve (ISI Marked) with iron wheel head screwed both ends for iron pipe 50 mm dia complete all as specified and as directed by Engineer-in-charge.

All as per above item No 42 above but size 40 mm dia bore complete all as specified and directed by Engineer-in-charge.

All as per above item No 44 above but size 25 mm dia bore complete all as specified and directed by Engineer-in-charge.

All as per above item No 42 above but size 20 mm dia bore complete all as specified and directed by Engineer-in-charge.

All as per above item No 42 above but size 15 mm dia bore complete all as specified and directed by Engineer-in-charge.

S&F in replacement cast iron non return valve flanged end conforming to IS 5312 of size 300 mm dia (ISI Marked) complete with rubber flange, MS nuts & bolts complete all as specified and as directed by Engineer-in-charge.

All as per above item No 47 above but 200mm dia complete all as specified and as directed by Engineer-in-charge.

All as per above item No 47 here-in-before but 150mm dia complete all as specified and as directed by Engineer-in-charge.

S&F in replacement cast iron air release valve flanged end conforming to IS 5312 of size 200 mm dia complete with rubber flange, MS nuts & bolts complete all as specified and as directed by Engineer-in-charge. Make- RMCO/ Kirlosker/ZOLOTO

M/s RP AGRAWAL

VIJAY ENTERPRISES

janta tradrers