Providing, Installation, testing and commissioning of monosub pump 5000GPH X 30MH and 150 KVA Voltage stabilizer at pumping station Jugrial Base Kalakote

Amount

Providing, of monosub pump set 5000 GPH x 30 m (Head Range +10-25) coupled with suitable motor at pumping station Jugrial Base. The recommended make of Pump should be Kirloskar/ KSB/ Crompton/mathur platt along with recommended make of monosub motor. The pumping Machinery should confirm relevant ISO with all latest amendments. The equipment shall also be accompanied with test certificates and performance curves. The cost includes carriage shifting of pumping machinery by MT and HL at site.

Installation, testing & commissioning of mono submersible pump set 5000 GPH X 30 MH along with allied electro mechanical equipments at pumping station Jugrial Base by way of carriage/shifting of pipes, welding set and allied material from stacking place to site of work by MT & H/L. Installation of monosub by way of fabrication of one small nipple of 80 mm dia GI pipe with both ends threaded , fastening of one end with suction of pump & other end with strainer. Providing of 80 mm dia GI column pipe (approx 6 mtr.) and then welding of flanges on both sides. Providing and Fitting of MS bend 80 mm dia with both ends welded with MS flanges of 80 mm dia. Fabrication of stand of angle iron for resting of monosub. Lowering of pumping assembly with GI pipe nipples into the tank with help of skilled and unskilled labour. P/F of automatic submersible control panel- 01 no of standard make fitted with all safety devices. Providing and fitting of submersible cable 2.5 mm2 for electrical connection from control panel to monosub. P/F of nut/bolts, washers & sundry items. Job includes checking continuity of electrical circuit & testing of machinery. Complete job includes cost of material, labour charges, welding charges & carriage charges at site.

Fabrication/ manufacturing of 150 KVA Voltage Stabilizer. Oil cooled unbalance Type 415Volt, Complete with Transformer Oil in Copper windings capable of operating on unbalanced Voltage. Capacity : 150KVA Phase : 03 Make : Confirming to relevant ISO With all latest amendments Input voltage : (160-380 ) volt Out put voltage : 415 volts +/- 1% Type : Manually operated Correction Rate : 12 to 35 V/sec Regulation : +/- 1% Frequency : 48 to 52 Hz Cooling Method : Oil Cooled Efficiency : 95% High & Low cut off : Installed with standard Capacity By pass change over Switch : Yes MCCB : Heavy Duty Single phase preventer : Yes Material of Construction : The Core should be first quality ( CRGO) Silicon Steel core, Conducting conductor should be off 99.95% of Electrolytic Copper, MS Steel thickness of container 14/16 SWG. Transformer Oil to be used shall be of best quality Conforming of IS 335 with latest amendments. Voltage stabilizer shall be mounted on 02 pairs of H/D MS wheels for making shifting/ fixing easy, Voltmeter/Ampere meter Good quality ISI make of Required Specification, Toggle Switch 03 No for input/output reading of each face . Rotary Switches Of suitable Amp range each of 08steps 01 for Line voltage

PERFECT ELECTRICAL WORKS

M/s RK Elect. Mech. Engg and fabrication works