7 Mini Mast Light Installation

Amount

supply and installation

supply installation testing and commissioning of octagonal pole made of hotdip galvanized GI sheet 70 MM top diameter 130 mm bottom diameter thickness 3mm base plate dimension of 200 X200X 16 mm suitable for wind speed as per IS 875 part III fixed head frame including round arm loominary carriage suitable to install 4/6 nos luminaries in simitrical arrangment including connector foundation bolts 4 no excisting RCC foundation and junction box etc .complete 8 metres . (spec code -90151.1)

supply conceyance installation testing and commission of 100 W LED flood light output greater than 105 glumee/W 4000 -6000 K with IP 66 protection LED chip make Cree /Lumilled/Nichea with power factor greater than 0.95 at full load internal surge protection upto 8 KV and lauminium pressure diecast powder coated housing acrylic cover complete withTHD less than 10 percentage power factor greater than 0.98 ROHS complained duly wired up for use on 230 v AC supply .Driver compartment should seperatly accessble for the maintenance (LM 79 and 80 certificate from NABL accredited.Third party lab to be produced mentioning chip manufacturer ) (spec code -90.15.4.7)

Excavation for foundation in soft soil including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed with the lead of 50 m (spec code-14.1)

providing and laying in position reinforced cement concrete 1:2:4 (1 cement :2 course of sand :4 graded stone aggregrate 20 mm nominal size ) in foundation of pump DG set minimast set etc including form work etc as required (excluding reinforcement) (spec code-14.1)

supply and providing steel reinforcemnt for RCC work including straighting cutting bending in shape and binding etc as required . (spec code-5.22.0)

supply and providing 12 mm thick cement plastering of mix 1:4 (1 cement :4 fine sand) (spec code-13.11)

earthing with GI earth plate 600 mm X 600 MM X 6 MM thick including acessiories and providing masonary enclosure with cover plate having locking arrangement and water in pipe of 2.7 m long etc with charcoal /coke and salt as required (spec code-5.4)

providing and fixing testing joint made of 2 no strips as mentioned below of the following sized provided on either side of the conductors with 4 no of GI bolts ,nuts check nuts and spring washers etc complete as required ( for down conductors ) 2 no 25 X 6MM GI strip 150 mm long

providing and fixing 25 X 5 mm GI strip on surface or in recess for connection etc as required

supply and drawing bare earthing conductors of the following size laid 0.6m below ground level including excavating trench as required . 3.15 mm copper conductor (10 SWG )

supply and drawing bare earthing conductors of the following sizes along with wiring /cables and giving connection as required . 2.65 mm copper conductor (12 SWG) (spec code-80.10.2)

supply of superior quality earth sockets for following sizes of earth conductors including crimbing etc as required 2.00 mm (14 SWG ) (spec code-90.11.2)

3.5 mm (10 SWG ) (spec code-90.11.2)

supply of superior quality copper earth sockets for following sizes of earth conductors including crimbing etc as required 25 X 3 mm brass bolt and nut (spec code-80.11.11)

25 X 6 mm brass bolt and nut (spec code-80.11.12)

facbrication supply and installation of dust and vermin proof wall mounting hot press moulded SMC meter box of following sizes suitable for fixing KSEB meter fuse units CT etc hinged door construction for the front side with compartments if necsssary providing vision panel for the meter compartment knock out for cable entry and exit GSMB 3750 (inside 350 X 481X 210 mm )

supply and fixing the following acessiories in the exsisting meter board and giving connection etc 32 A HRC fuse base with HRC fuse link (spec code-80.15.2)

32 A 4 15 V 2 way neutral link mounted on DMC SMC case (spec code-80.16.1)

supply and installation of the following acessiories suitable for 50 Hertz AC Supply conforming to IS 88 28 -1995/IEC 60898 of the following current ratings in the excisting enclousure and giving connections as required 25 A double pole 240 V mini brake isolater (spec code-2.12.1)

S and F 6 A -32 A SPMCB (c curve) (spec code-2.10.1)

40 A 2 pole 240 V 30 MA RCCB (spec code-40.2/19)

supply and proving 24 hours digital time work and giving connection

supply and proving 25/3 mm copper earth bus 150 mm long in the excisting box

supply and drawing PVC insulator and Sheathed 650 /1100 V grade 3 core conductor flat cable for submersible pump motor conforming to IS 694 part 1 1990 as required including giving necessary connection for the following sizes 2.5 sqmm(spec code-90.6.6.2)

charges for preparation of test report to KSEB

fabrication supply and coveience and insulation of granite name board indication the cost involved commencement ,completion and inaugration date etc

Ammini Energy Systems Pvt Ltd

POZITIVE POWER INDIA PVT LTD

MERKURY ELECTRICAL CORPORATION

SHAJAHAN K A

ALLUMINA ELECTRONICS