Constg. of New Anganwadi Building at Village (1) Panivasan-1 , (2) Panivasan-2, (3) Sadra Nishal Falia, (4) Moti Mangoi Nishal Falia, (5) Bamroli Muvada Falia & (6) Bamroli Kheda Falia of Devgadh Baria Taluka under Article 275 (1) Yojana 2026-27. Package No.3. Dist.Dahod (Total 6 Anganwadi)

No. figures Amount

Civil Work

1 Excavation for foundation upto 1.5M depth including sorting 607.80 Cu.m. 125.86

out and stacking of useful materials and disposing of the

excavated stuff upto 50 Meter lead.in (A) loos and Soft Soil

2 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 64.98 Cu.m. 2679.92

coarse sand : 8- hand broken stone aggregates 40 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

3 Brick work using common burnt clay building bricks having 91.44 Cu.m. 3853.23

crushing strength not less than 35 Kg. / Sq. Cm. in foundation

and plinth in Cement motar 1:6 (1- cement :6-fine sand) (b)

conventional

4 Providing and laying cement concrete work M-200 (1- Cement : 64.80 Cu.m. 4153.88

1.5- Coarse sand : 3- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in ( A ) Foundations

footing base of columns and mass concrete

5 Providing and Laying ordinary cement concrete M-200 (1- 13.80 Cu.m. 10869.51

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Columan up to plinth

6 Providing and Laying ordinary cement concrete M-200 (1- 36.30 Cu.m. 7877.05

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Ground Beam

7 Filling available excavated earth (excluding rock) in 461.40 Cu.m. 137.47

trenches. plinth, sides of foundations etc. in layers not

exceeding 20cm. in depth consolidating each disposited

layer by ramming and watering.

layers of 20cm. thickness including watering, ramming and

consolidating etc. completed.

9 Filling in plinth with sand under floors including watering 25.32 Cu.m. 419.82

ramming, consolidating and dressing etc. Complete

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

10 Providing and laying cement concrete 1:2:4 (1- Cement : 2 25.26 Cu.m. 3653.61

coarse sand : 4- stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork in Foundation and

11 Brick work using common burnt clay building bricks having 188.58 Cu.m. 4141.66

crushing strength not less than 35 Kg. / Sq. Cm. in

Superstructure in Cement motar 1:6 (1- cement :6-fine sand)

brick work in superstructure above plinth level up to floor two

level (B) Conveentional

12 Providing and Laying ordinary cement concrete M-200 (1- 27.90 Cu.m. 10869.51

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Column

13 Providing and Laying ordinary cement concrete M-200 (1- 4.80 Cu.m. 10430.85

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Lintel

14 Providing and Laying ordinary cement concrete M-200 (1- 38.88 Cu.m. 7665.49

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Slab

15 Providing and Laying ordinary cement concrete M-200 (1- 37.98 Cu.m. 7877.05

Cement 1.5- coarse sand : 3- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in Beam

16 Providing ISI Mark T.M.T Bar 415 Fe reinfircement for R.C.C. 21984.00 Kg. 68.33

work including binding, and placing in position complete upto

floor two level.

17 Providing 10mm thick cement plaster in single coat on 1318.50 Sq.m. 172.04

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:6 (1-cement:6-

18 Providing 15mm thick cement plaster in single coat on 685.50 Sq.m. 201.79

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-

19 Providing 20mm thick cement plaster in single coat on single or 1048.50 Sq.m. 229.15

half brick walls for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4 (1 cement :4-

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

20 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 369.18 Sq.m. 1434.75

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade (double Vitrified)

21 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' 94.20 Sq.m. 1120.36

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement. (Double Charged)

22 Provoding and fixing steel door with shutter with frame 50 x 50 x 36.60 Sq.m. 2751.54

6 mm. iron angle and BG 18 mm. steel platewith hinges, handle,

stopper, locking arrangement etc. steel work welded in built

section cutting hosting, Finishing on position two coats of oil paint

and one coat etc. comp.

23 Providing and fixing window having extruded aluminum Colour 63.00 Sq.m. 1705.67

Powder Coated section frame main outer size 63.50 x 38.10 x

1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt),

horizontal two track member size 61.85 mm x 31.75 mm x

1.20mm (of Jindal Section no: 8687 @ wt.of 0.695 Kg/mt),

vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of

Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm (of

Jindal Section no:8949 @ wt.of 0.456Kg/mt), vertical member of

size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @

wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm

thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for

24 Providing and fixing M.S. grills of required pattern to wooden 1575.00 Kg. 110.31

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts and

nuts or by screws.(A)plain grill.

25 Applying two coats of putty & two coats of primer of approved 2160.00 Sq.m. 40.59

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

26 Distempeing (Two coats) with oil bound washable distemper of 1110.00 Sq.m. 77.30

approved brand and manufacture and of required shade on wall

surfaces to give an even shade, over and including a priming

coat with alkali resistance primer of approved brand after

thoroughly brushing the surface and other foreign matter and

also including preparing the surface even and sand parpered

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

27 Finishing wall with water proofing cement paint of on wall 1050.00 Sq.m. 62.43

surfaces (Two coats) to give an approved brand and

manufacture and of required shape even shade after thoroughly

brushing the surface to remove all dirt and remains of loose

powered materials.

28 Providing, fabricating, and fixing stainless steel railing using SS 108.00 Rn.m. 1161.50

304 grade (minimum 1.5 mm thick, 50 mm dia hollow pipes for

handrail and 38/32 mm dia pipes for vertical/middle supports),

including necessary bends, elbows, base plates, cover plates,

welding, grinding, and polishing to achieve a smooth finish. The

railing shall be fitted with toughened clear glass panels of

thickness _ mm (minimum 12 mm), fixed with SS glass holding

clamps/brackets and rubber gaskets, aligned properly and made

rigid and safe. Work includes all cutting, drilling, welding,

grinding, buffing, anchoring with stainless steel bolts/fasteners,

scaffolding, and finishing complete in all respects as per

approved drawing and instructions of Engineer-in-Charge

29 Constructing a sink (chowkedi) with C.C. 1:2:4, 12cm. thick over 13.38 Rmt 2258.02

B.B. masonry in C.M, (1:6) in front and dwarf wall 1.0 Mt.high

and 23 cm.thick cement plaster to masonry / in C.M.1:3) and

cement concrete flooring in 1:2:4: mi x 5 cm. dia. drain pipe

etc.complete.

30 Constructing a cooking platform 60 cm. width and 70 cm high 18.00 Rmt 2656.06

resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii)

Fixing black kadappa stone 30mm thick laid on precast R.C.C.

(1:2:4) slab with plastering on exposed faces of wall in C.M. (1:4)

etc complete.

31 Providing and fixing water closet squatting Pan (Indian type W.C. 6.00 Each 1019.19

Pan) size 580mm (Earthwork, bed concrete, foot reste and trap

to be measured and paid for separately) (A) Vitreous China. (I)

Long pattern = White colourr

32 Providing and fixing washbasin with single hole for pillar tap with 6.00 Each 1486.04

C.I. or M.S. brackets painted white including sutting holes and

making good the same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i)

In white colour.

33 Providing and fixing C.P. brass waste for washbasin or sink. (B) 6.00 Each 89.83

34 Providing and fixing 100mm sand cast iron grating for gully, floor 12.00 Each 36.98

or Nahni trap.

35 Providing and fixing 600mm x 450mm bevelled edge mirrror of 6.00 Each 859.41

superior glass mounted on 6mm thick A.C. sheet or plywood

sheet and fixing to wooden pluge with C.P. brass screws and

36 Providing and fixing Gun metal screw down bib tap 12.00 Each 158.86

(i) 15 mm dia.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

37 Providing and fixing pillar tap, capstan head, screw down high 12.00 Each 308.73

pressure with screws, shanks and back

nuts. (i) 15 mm dia

38 Providing and laying and jointing with stiff mixture of cement 90.00 Rmt 317.33

mortar in proportion 1:1 selt glazed stoneware pipes including

testing of pipes and joints complete. (A) 150mm dia.

39 Providing laying an jointinh in true line and level 15mm dia. 120.00 Rmt 72.65

U.P.V.C. pipe (SCH - 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer in charge. Pipe shall be fixed on the wall

with the help or clamp of every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

40 Providing and fixing concealed center point to wall ceiling & floor 90.00 Rmt 338.24

CPVC (SDR 13.5) PIPE having National Sanitation Foundation

(NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and

floor etc. complete. [D] 32 mm.

41 Providing and fixing to wall celling and floor 6.0 kg. F/cm2 60.00 Rmt 339.05

working pressure poluthene pipes of the following outside Dia.

Low density, complete with special falnge compression type

fittings, wall clips etc. Including making good the wall celling and

floor. (G) 110mm

42 Construction brick masonry chamber for underground C.I. 12.00 Each 2932.93

inspection chamber and bends with bricks having croshing

strength not less than 35kg.Cm2 in C.M. 1:5 C.I. cover with

frame and wt of frame 15kg. (R.C.C. top slab with 1:2:4 mix

foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with afloating coat of neat

cement on walls and bed concrete etc. complete. (i) inside

demensions 455mm x 610mm and 450mm deep for single pipe

43 Providing erecting and fixing double coated Syntex PVC. (ISI) 6000.00 liter 3.95

water tank of required capacity each with all necessary fittings

and connection etc. complete on terrace.

44 Providing soak pit of 5.00 Cum volume including excavating and 12.00 Each 3285.35

filling brickbats with dry masonry work at top for 45cm. Hieight

including covering the top with stone including providing vatas in

C.M. 1:3 with finishing curing etc. complete as directed.

45 Providing C.I. manhole cover 0.60M x 0.45M size having weight 12.00 Each 958.17

not less than 35kg.

46 Dismentalling the old detoriated Anganwadi building using JCB 2.00 Nos 46388.29

machine from top to bottom with foundation and clearing the site

by disposing of the unserviceable materials from the site of work

to borrow area as directed by Engineer in charge and depositing

the serviceable materials like old steel bars, old wooden / steel

doors & windows & rubble using tractor with trolly at the place as

and where agency desire etc. complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

47 Providing Supplying and fixing TV of Approved Brand size of 42" 6.00 Nos 36865.00

48 'Providing & Supplying of High-quality virgin plastic build Table 6.00 NOS. 3535.00

size LxBxH (1.50 x 0.75 x 0.75) As per attached drawing &

instructed by in charge Consultant. 52-Inch Kids Half Moon

Plastic Table is a durable and spacious table designed with

adjustable height legs for children. Its unique half-moon shape

provides ample space for group activities, crafts, or learning.

Made from sturdy plastic, it is easy to clean and maintain, making

it ideal for classrooms, playrooms, or home use. Table of

Standard make ( Nilkamal, Cello etc. or equivalent ).

49 'Providing and Supplying of Fancy CHAIRS of pvc base and 24.00 NOS. 939.30

per instruction of architect or Engineer-in charge Product Type

Kids School Chair,Back Type:Mid

Back,Material:Plastic,Color:Red, Yellow, Blue. Min Size14x17x12

inch Chair of Standard make ( Nilkamal, Cello etc. or equivalent

50 Providing and fixing educational information, 48.00 Sq.mt 1060.50

learning charts, child-friendly graphics, alphabet charts,

number charts, village scenes, thematic illustrations,

photographs and other approved designs on wall surface using

printed flex material of approved quality and thickness,

including providing and fixing P.V.C. border patti around the

flex sheet, necessary adhesive material, cutting, alignment,

fixing, finishing and all labour, materials, transportation,

tools & tackles and incidental charges complete as

directed by Engineer-in-Charge.

51 Providing & Fixing Kitchen Storage Cabinetwith 5 self , 2 nos 22.50 Sqmt. 3838.00

door 19 mm plywood with 4 mm glass panel door,Storage self

made with 12mm thick water proof plywood of ISO 710, door

sides border of 20 mm thick in teak wood, All outer surfaces are

to be laminated with 1.5 mm laminate and internal laminated with

0.80mm laminate sheet as approved by architect. Including all

necessary hardware & fittings such as screw, buffer, bonding

material etc.all work must be done As per Architect Drawing &

Instructed By Site Engineer

52 Providing and fixing educational information, 96.00 Sq.mt 909.00

learning charts, child-friendly graphics, alphabet charts,

number charts, village scenes, thematic illustrations,

photographs and other approved designs on exterior/compound

wall surfaces using weather-resistant and UV-resistant

digitally printed flex material of approved quality and thickness,

including providing and fixing P.V.C. border patti around

the flex sheet, necessary adhesive material, cutting,

alignment, proper fixing, finishing and all labour, materials,

transportation, tools & tackles, scaffolding and incidental

charges complete as directed by Engineer-in-Charge.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

53 Preparing and making Scribble Wall on wall surfaces using 43.20 Sq.mt 505.00

approved green chalk paint finishing, which is suitable for

writing and drawing. Cost include surface preparation,

cleaning and smoothening, application of required primer or

base coat when needed and finally applying the approved

green chalk paint for making a smooth, durable and

uniform writable surface. The above work will include

finishing of border, labour, materials, tools, scaffolding,

transportations, etc., all included as per directions by the

Engineer-in Charge.

54 Providing and fixing Fabric Finished Pin-Up Board of 14.40 Sq.mt 2525.00

approved quality and size with fabric covered soft board/cork

board surface mounted on suitable backing material and

frame, including necessary base fittings, screws, fixtures,

supports and all accessories required for

complete installation as per approved drawing and

specifications. The rate shall include all materials,

labour, tools & tackles, transportation and incidental

charges complete as directed by Engineer-in-Charge.

55 Providing and supplying Educational Abacus of approved 6.00 No. 1363.50

quality having overall width of 0.30 m to 0.45 m with

coloured movable beads mounted on sturdy frame with

multiple rods/wires suitable for teaching basic arithmetic,

counting and learning activities for children,

manufactured from child-safe non-toxic material with

smooth edges and durable finish, complete with all

necessary accessories and fixing arrangements as per

approved design and specifications, including

transportation and incidental charges complete as directed by

Engineer-in Charge.

56 Providing and laying cement concrete 1:3:6 (1- Cement : 3- 9.60 Cu.m. 3992.44

Coarse sand : 6- crushed stone aggregates 20 mm nominal size)

and curing complete including cost of formwork in (A) Wall Caps

57 Providing Mild Steel reinfircement for R.C.C. work including 166.38 Kg. 61.65

bending binding, and placing in position complete upto floor two

58 Providing H.Y.S.D. Bar reinforcement for R.C.C. work including 414.00 Kg. 63.87

bending, binding and placing in position complete upto floor two

59 Colour washing with lime on wall surface ( two coats ) over and 894.60 Sq.m. 21.57

including of primer coat of white washing to give and even shade

after through brooming the surface to remove all dirt,dust, mortar

drops and other foreign matter.

60 Providing and fixing in position steel gates using angle iron 15.60 Sq.m. 2379.99

sections steel bars M.S. plats as per design and drawing

including welding, cutting applying priming coat of red lead paint

and oil painting etc. complete. (Weight of gate not less than

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

61 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 300.00 Sq.m. 702.02

concrete block 60mm thick with grade of concrete M300

pnumatic compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc. Complete.

62 Drilling of 215 mm dia. Bore in over burden strata (0-30) 480.00 Rmt. 346.43

including lowering and fixing of 175 mm nominal dia UPVC

pipe/175 mm dia ERW pipe upto required depth and further

drilling of 165mm dia bore hole in rocky strata by DTH rig.

63 Manufacture, supply and delivery of ISI marked (IS-12818) with 36.00 Rmt. 847.39

latest amendment.

Rates are inclusive of GST

c) UPVC casing pipe 175 mm nominal dia. "CS" type

64 Lowering of Single phase submersible pump set complete with 6.00 Job 2870.42

required length of HDPE pipe, cable in borewell and fitting of

control panel board including wiring work and satisfactory testing

as per instruction of Engineer in charge at different villages

including carting/ loading/ unloading of material to site for bore

deptrh upto 90 mts....

(Mech. SOR 2021-22, Setion-E, Item No. 52.1(A),Page No.78)

1) 40mm dia MS Pipe Clamp with fitting accessorries

2) 175mm x 40mm Bore cap in two Halves with 40mm Hole

3) Submerssible coupler for jointing of sub pump & HDPE Pipe

4) Teflon tape

( As per approved rate by SE,P.H.M.Circle-Vadodra vide No.

Bore Plug of 100 mm Height made from 5 mm thick M.S. plate

(For top also) with 3 holes at equal distance on circumference for

nut – bolts type, locking arrangement with nuts – bolts & lock

nuts of std. make complete.

65 Providing & Supplying Single phase Borewell sub pump motor 6.00 Job 11835.18

set with control panel Cat Q : 1.3, 20 LPM/110 mtr Head 1.5 HP

MOC: Casing: CI-FG260, Impeller : Bronze & Shaft : SS:410

66 PVC insulated flat submersible cable as per detailed technical 600.00 Rmt. 57.70

specifications of R/C of GWSSB conforming to IS 694, IEC

67 Manufacture, Supply and delivery of following ISI marked 600.00 Rmt. 55.55

H.D.P.E. Pipes (IS:4984/1985 with latest amendment) having

material Grade PE-80 in approximate 100 mtr. Coil length or as

per GWSSB requirement with SS-316 Nipple at both end having

11 TPI threading as per specification, press fitted and bolted

having nominal diameter as under as per detailed Technical

Specification.Rates are based on IOCL Resin A Grade 45 GP

004DP44 as on dated 01.12.2017 Rs. 90284/- (Without GST)

Rates are Exclusive of GST.

Total of Civil Work

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

Electrification Work

68 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 72.00 Pt. 582.77

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/ white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. Cat-III

69 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 30.00 Pt. 809.01

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Ca-

70 Point wiring for on board Looped Plug with 6A Modular type 36.00 Pt. 309.06

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

with following type accessories. Ca-III

71a Providing following type of Modular Type Accessories mounted 18.00 Ea 151.50

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed

by Engineer In charge.(1) One No. SP 6 Amp.Cat-III

71b (2) One No 5 pin plug.Cat-III 18.00 Ea 151.50

71c (4) TV Co-axial Socket outlet .Cat-III 6.00 Ea 160.59

71d (9) 16 Amp. SP one way switch.Cat-III 18.00 Ea. 180.79

71e (10) 6/16Amp. Universal socket Ca-III 18.00 Ea. 199.98

72 Providing and erecting ISI mark Medium class RIGID PVC 120.00 Mtr. 33.33

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of pipes,

in approved manner as directed.(b) 25 mm

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

73a Providing and erecting Mains with 1.1 KV grade FRLS PVC 252.00 Mtr. 78.78

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size. (a) with

medium class Rigid PVC pipe and accessories..(a) 2 wire 1.5 sq.

73b (b) 2 wire 2.5 sq. mm 1500.00 Mtr. 104.03

74 Providing and erecting Mains with 1.1 KV grade FRLS PVC 180.00 Mtr. 184.83

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (a) with medium class

Rigid PVC pipe and accessories.(b) 2 wire 6 sq. mm

75 Supplying and erecting Flexible PVC insulated multi strand multi 30.00 Mtr. 58.58

core 1.1 kV grade ISI marked copper wires of following size to be

erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed

76 Providing & Erecting approved make following size of TV Co- 132.00 Mtr. 39.39

axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor made of

poly - Aluminium film bonded Al. Braids @ suitable coverage

overall sheathed with black PVC insulation.(b) RG-6

77 Providing & erecting Switch board for Computer or electric 6.00 Ea. 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed.

no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch,

nos. 6A 5 pin Plug [B] For Modular Type Accessories Ca-III

78a Supplying and erecting LED indoor fittings with LEDs of wattage 6.00 Ea. 373.70

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD <

15%,CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

,LED driver efficiency > 85 % (fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

Tube Light with integral driver. (iv) 22-24 Watts, Surge - 2KV,IP-

20, conventional 4 feet Ca-III

78b (v) 36 Watts, Surge-2 KV, IP-20, conventional 4 feet Ca-III 54.00 Ea. 535.30

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

79 Supplying and erecting led lamps with following wattage capacity 6.00 Ea. 112.11

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V

in built, surge, protection, Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED

Lamps integral type, with PC diffuser suitable LAMP holder. (ii)

8 watts Cat-III

80 Supplying and erecting LED street light / Flood light fittings with 12.00 Ea. 2843.15

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (A) Street Light (IP-65), Surge

protection -4kV integral and ,Light must have 440VAC line supply

with over-voltage protection. (iii) 36Watts.Cat-III

81 Providing and erecting busbar chamber confirming to IS-375 3.00 Rn. 2602.78

fabricated from 16 G.M.S. sheet, dust & vermin proof having Mtr

hinged door with rubber gasket and necessary busbar supports

with Aluminium busbar having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly wrapped

with colour insulation tape for phase sequence, three phase &

neutral each Suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of

required size with necessary connections.(A) Suitable for 63/100

Amp. capacity

82 Providing and erecting Miniature circuit breaker single pole 0.5A 12.00 Ea. 297.95

to 2A system and having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996 with ISI Mark.Cat-III

83 Providing and erecting Miniature circuit breaker single pole 6A to 48.00 Ea. 123.22

25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Ca-III

84 Providing & erecting 240 V MCB double pole switch for motor & 6.00 Ea. 329.26

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity.(A)

6 to 32 Amp.Cat-III

85a Providing & erecting 240 V MCB double pole switch for lighting 18.00 Ea. 306.03

Load (B Curve) having 10 KA breaking capacity & confirms to IS

: 8828 in existing box having following capacity.(a) 6 to 32 Amp.

85b (b) 40 Amp. Ca-III 6.00 Ea. 325.22

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

86 Sheets steel powder coated enclosure suitable for incorporating 24.00 Ea. 176.75

One/Two nos. MCB.

87 Providing and erecting Sheet Steel powder coated MCB 6.00 Ea. 1492.78

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for (A) single phase incoming and horizontal single

phase outgoing.(b) sheet steel double door (IP-43) (iv)12 way

88 Providing and erecting Approved make RCCBs conforming to IS: 6.00 Ea. 2166.45

12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed. (i) 25 Amps.DP.Cat-III

89 Providing and erecting HOT deep Galvanised iron strip wire 8 to 30.00 Kg 77.77

90 Supplying & erecting earth pit of minimum bore dia.150mm size 6.00 Ea. 4591.46

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound

with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:-

0.2 / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil Length of

pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

91 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured 429.00 Mtr. 112.11

cable Aluminium conductor for 1.1 kV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of

cables. (B) 2 core 6 Sq. mm

92 Providing and, fixing heavy duty flange type brass cable gland 24.00 Ea. 38.38

with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.(c)

2 to 4 core 6 Sq. mm

93 Solder less crimping type Aluminium lugs conforming to IS 48.00 Ea. 6.06

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.(A) 1.5/

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

94 Providing and erecting Approved make Ceiling fan with double 30.00 Ea. 1596.81

ball bearing ISI mark with condenser A.C. 230V.50 Hz.1200

mm. sweep complete, canopy erected on existing hook or clamp

with earthing. [Make shall be approved by Engineer in charge]

95 Supplying and erecting 19 / 20 mm. nominal bore Medium Class 30.00 Mtr. 108.07

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing.

96 Supplying & erecting fan hook box of 10 mm M.S. round bar 30.00 Ea. 108.07

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

Total of Electrification Work

Total Amount (Civil + Electrification Work) TOTAL Rs.

Total Amount (Civil + Electrification Work) TOTAL Rs.

i.e. Rupees Eighty Nine Lakh(s) Thirty Three Thousand Nine Hundred Seventy Seven And Paise Twenty Seven Only

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as

per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

5. Credit for dismantalled materials of amount of Rs. 40000.00 must be recovered from 1st R.A. bill of

Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Deputy Executive Engineer

Panchayat (R & B) Sub Division Godhra Electrical Sub Division

D'BARIA R&B Deptt. Godhra

Divisional Account Officer Executive Engineer

Godhra Electrical Division Executive Engineer

Panchayat (R & B) Division

DAHOD R&B Deptt. Godhra Panchayat (R & B) Division