Open Jaw Wrenches (Spanners) as per IS 2028 (Q3)

Open Jaw Wrenches (Spanners) as per IS 2028 (Q3)

Dismantling of Old Us Distribution Boards alongwith its all accessories i.e. MCCB MCB wiring etc

Dismantling Existing UG Us serviceable cable of any type of following sizes a. 10 Sqmm 2 Core 10 Sqmm 4 Core 25Sqmm 4 Core 35 Sqmm 3.5 Core 50 Sqmm 3.5 Core.

S and L and testing cable XLPE PVC bedded galvanized steel strip or wire armoured electric power cables 1100 Volts SIZE. 10 Sqmm 4 Core.

AS PER SERIAL NO. 3 BUT SIZE 16 Sqmm 4 Core

AS PER SERIAL NO. 3 BUT SIZE 25 Sqmm 4 Core

AS PER SERIAL NO. 3 BUT SIZE 35 Sqmm 3.5 Core

AS PER SERIAL NO. 3 BUT SIZE. 50 Sqmm 3.5 Core

Relaying of existing cable XLPE Insulated galvanized steel strip or wire armoured electric power cables 1100 Volts 10 Sqmm 4 Core 2Core

AS PER SERIAL NO. 3 BUT SIZE 16 Sqmm 4 Core.

AS PER SERIAL NO. 3 BUT SIZE 25 Sqmm 4 Core.

AS PER SERIAL NO. 3 BUT SIZE 35 Sqmm 3.5 Core.

AS PER SERIAL NO. 3 BUT SIZE 50 Sqmm 3.5 Core

M and L for Excavation in trenches upto 1.5m deep Hard dense soil

M and L for Sand filling in trenches including watering and consolidation

M and L for removing of surplus excavated soil

M and L for Returning and filling of surplus excavated soil

Supply and laying Burnt clay fly ash building bricks designation 75Kg cm2 complete all as specified.

M and L for Floor of tiles PCC Footpath cutting through existing PCC floor Footpath approx size width 15cm or as required X 60cm as required

SPN Distribution Board 8 way 230V 50Hz IP54 and IK09 Suitable for Surface mounting with 100 A copper Busbar for each phase

S and F Distribution Box 4 way 430V 50Hz IP54 and IK09 Suitable for Flush mounting and Surface mounting with 100 A copper Busbar for each phase

S and F Distribution Box 4 Module 230V 50Hz IP65 and IK09 classII weatherproof cabinets Door and Cabinet fully reversible Removable chassis and faceplates

S and F Automatic changeover with current limiter ACCL SPN 30A 30A Automatic source chage over between Mains and Generator supply Break

S and F MCB SP 240V 10 KA B curve miniature circuit breaker MCB of single poles and current carrying capacity 6 to 32 AMP

M and L for Wiring for circuit submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor single core cable

Earthing for poles and other machinery equipment using 4 mm GI wire as earthing lead and MS galvanized plate of size 60 cm x 60 cm x 6 mm

S and F Cable Junction Box

made of CRCA Sheet Single door outdoor type factory made and assembled of size not less than 450x150x450

M and L for plain concrete cement 1.3.6 type C2 using 40mm graded coarse aggregate for foundation of Busbar Box including necessary form work

M and L for Plywood of 09 mm thick grade BWR type BB fixed with screws to puff panel work complete for fixing of DBs

M and L for Straight through LT cable heat shrinkable jointing kit suitable for LT UG of following sizes cable complete a. 10 Sqmm 4 Core.

M and L for fixing of MCCBs in replacement of 100 Amps 3 Pole 415 Volts thermal nd magnetic adjustable type 0.8 to 1In Magnetic Adjustable 5 to 10In

M and L for fixing of MCCBs in replacement of 125 Amps 3 Pole 415 Volts thermal nd magnetic adjustable type 0.8 to 1In Magnetic Adjustable 5 to 10In

S and Fix HDPE Pipe of 50mm dia for protection of cable under the floor etc complete all as specified and directed