Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.4 LAccepted-Finance | ₹22.4 L | L1 | Accepted-Finance Due to Lowest Quoted Rates |
| 2 | L2₹25.0 LRejected-Finance | ₹25.0 L | L2 | Rejected-Finance Due to Higher Quoted Rates |
| 3 | L3₹26.3 LRejected-Finance | ₹26.3 L | L3 | Rejected-Finance Due to Highest Quoted Rates |
| Sl No | Description | Qty | Unit | Lotus Contractors and Traders L2 | SHIV SHAKTI ENTERPRISES L1 | prateek enterprises L3 |
|---|---|---|---|---|---|---|
| 1.00 | SITC of Heat pump Outdoor Type (IPX4/IPX5) or Better, with Heating Capacity: 50KW, Cooling Capacity: 42.1, COP of Heating: 4.55 to 6.70 according to weather condition, COP of Cooling: 3.83tc 5.70 according to Weather Condition, Max Output Water Temp: 45°C, Power Supply: 380~415V/50Hz/3Ph, Input Power: 7.4 KW, Current: 16A, Max Input Power: 11 KW, Max Current: 23A, Evaporator Coil: Blue Finned Evaporator Coll, Throttling Valve: Thermostatic Expansion Valve / Electronic Expansion Valve, Heat Exchanger (Condenser): PVC Shell Titanium Condenser, Refrigerant: R410a/R407C, Compressor: Scroll Number of Compressor: 2, Fan Quantity: 2 nos., Fan Discharging: Vertical, Water Flow: 22-25m³/hr, Pipe Size (Inch): Rc2, Noise: ≤66 dB(A), Dimension (mm): 1450 X 890 X 1110, Weight: 320Kg, Test Condition: Ambient Temp.(DB/WB)= 24deg C./19 deg C., Inlet Water Temp. = 26 deg C., Outlet Water Temp. = 28 deg C. (Ε.Τ. 10 deg C./ C.T. 40 deg C.). Cooling condition: Inlet Water Temp. = 18 deg., Outlet Water Temp. = 16 deg. (Ε.Τ. 10 deg./C.T. 40 deg.), Reverse mode for heating & cooling - voltage protection inbuilt-GI Cabinet powder coated for rust free use - Titanium heat exchanger in PVC shell - compressor for higher cop-smart touch control panel. Microprocessor Bassed, IP55, With Sort Ckt, 10 w flow rate, overload, Earth Fault Protection. | 3 | No. | 5,68,500 ₹17.1 L | 5,16,357.99 ₹15.5 L | 6,00,000 ₹18 L |
| 2.00 | SITC of Water Circulating Pump with Flow rate: 22-25 m3/hr @ Suitable Head (Actual capacity may differ as per site requirements) | 3 | No. | 53,900 ₹1.6 L | 48,884.03 ₹1.5 L | 57,000 ₹1.7 L |
| 3.00 | Plumbing work as per Requirement of site, | 1 | Job | 22,500 ₹22,500 | 15,719.83 ₹15,719.83 | 24,000 ₹24,000 |
| 4.00 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes Having Thermal Stability for hot and cold water supply and all CPVCplain and brass threated fittings, including Fixing the pipe with clams at 1 m spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per Direction of Engineer In Charge. | 35 | Mtr | 890 ₹31,150 | 783.39 ₹27,418.65 | 1,000 ₹35,000 |
| 5.00 | Providing and fixing Gun Metal Gate Valve with C.I. wheel of Approved Quality (scruwed end) 50 mm nominal bore | 6 | No. | 975 ₹5,850 | 861.03 ₹5,166.18 | 1,100 ₹6,600 |
| 6.00 | Providing and fixing Gun Metal Non Return Valve with C.I. wheel of Approved Quality (sc@wed end) 50 mm nominal bore | 1 | No. | 1,310 ₹1,310 | 1,149.49 ₹1,149.49 | 1,500 ₹1,500 |
| 7.00 | Supply and errection of factoty fabricated dust and vermin proof floor mounting panel complete with following rating and breaking capacity 36 KA 01 No, 100 amp 4 Pole MCCB As Main Incommer, and 04 No, 32/40 Amp/ 25 KA 4 pole MCCB as Outgoing with thermomagnetic release and terminal spreaders digital ameter, voltmeter selector switches and suitable size Al. Busbar as per 8623 insulated with heat shrink sleeving & mounted on non hygroscopic support in cubicle panel board Including drilling holes in cubicle panel, making connections, etc. as required. The Job includes the grouting of the board as per direction of engineer in charge. the switch board shall be fabricated with CRCA sheet with a minimum thick ness 1.6 mm/2 mm cubical type switch board. Main Panel Switch Gear. | 1 | No. | 1,00,000 ₹1 L | 80,484.09 ₹80,484.09 | 1,05,000 ₹1.1 L |
| 8.00 | Supply Installation Testing nad Commissioning of 100 Amp, 36 ΚΑ Breaking Capacity, 4 Pole MCCB, With thermal magnetic release in the Existing Main Panel, to Supply the power to the Distribution Panel for Heat pump System For Sweaming Pool. | 1 | No. | 15,000 ₹15,000 | 12,712.49 ₹12,712.49 | 15,000 ₹15,000 |
| 9.00 | Supplying, Laying, testing and commissioning of 3.5 core 70 sq.mm, Aluminium Conductor, XLPE insulated, PVC sheathed, steel armoured, Cable 1.1 kV grade, FRLS compliant LT power cable conforming to IS 7098 (Part- 1), including drawing and laying the cable in the existing masonry-protected DWC/HDPE pipe network, ensuring uniform pulling, proper bend radius, mechanical protection of armour, Identification tagging, continuity verification, Insulation resistance testing, and completing the work as per IE Rules, site engineering practice and standard specifications, all complete.3.5 Core 70 Sq mm XLPE AI Armoured Cable | 180 | Mtr | 1,190 ₹2.1 L | 1,025.29 ₹1.8 L | 1,200 ₹2.2 L |
| 10.00 | Supplying, Laying, Testing and Commissioning of 4 core x 10 sq.mm Aluminium Conductor, XLPE insulated, PVC sheathed, steel armoured Cable 1.1 kV grade, FRLS compliant LT power cable conforming to IS 7098 (Part-1), including drawing and laying the cable in the existing masonry-protected DWC/HDPE pipe network, ensuring uniform pulling, proper bend radius, mechanical protection of armour, identification tagging, continuity verification, insulation resistance testing, and completing the work as per IE Rules, site engineering practice and standard specifications, all complete 4 Core 10 Sq mm XLPE Al Armoured Cable | 30 | Mtr | 390 ₹11,700 | 349.49 ₹10,484.70 | 410 ₹12,300 |
Tender Value
Refer Docs
EMD Value
₹52,000
Closing Date
21 Apr 2026, 5:00 pmClosed
Executive Engineer(E/M)
OFFICE OF THE EXECUTIVE ENGINEER E/M Division Public Works Department., Dehradun OFFICE OF THE EXECUTIVE ENGINEER E/M Division Public Works Department., Dehradun
Installation of Heat pump system at the Swimming pool of the Civil Service Institute (CSI) located on Old Mussoorie Road,Rajpur,Dehradun
2026_pwd_93606_1
569/Nivida Dated 24/3/26
Open Tender
Electrical Works
180 days
Dehradun Mussoorie Road
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,360
Executive Engineer, E/M Division PWD Dehradun
₹52,000
Dehradun
27 Apr 2026
31 Mar 2026
22 Apr 2026
31 Mar 2026
21 Apr 2026
31 Mar 2026
31 Mar 2026 - 7 Apr 2026
8 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.0 | SITC of Heat pump Outdoor Type (IPX4/IPX5) or Better, with Heating Capacity: 50KW, Cooling Capacity: 42.1, COP of Heating: 4.55 to 6.70 according to weather condition, COP of Cooling: 3.83tc 5.70 according to Weather Condition, Max Output Water Temp: 45°C, Power Supply: 380~415V/50Hz/3Ph, Input Power: 7.4 KW, Current: 16A, Max Input Power: 11 KW, Max Current: 23A, Evaporator Coil: Blue Finned Evaporator Coll, Throttling Valve: Thermostatic Expansion Valve / Electronic Expansion Valve, Heat Exchanger (Condenser): PVC Shell Titanium Condenser, Refrigerant: R410a/R407C, Compressor: Scroll Number of Compressor: 2, Fan Quantity: 2 nos., Fan Discharging: Vertical, Water Flow: 22-25m³/hr, Pipe Size (Inch): Rc2, Noise: ≤66 dB(A), Dimension (mm): 1450 X 890 X 1110, Weight: 320Kg, Test Condition: Ambient Temp.(DB/WB)= 24deg C./19 deg C., Inlet Water Temp. = 26 deg C., Outlet Water Temp. = 28 deg C. (Ε.Τ. 10 deg C./ C.T. 40 deg C.). Cooling condition: Inlet Water Temp. = 18 deg., Outlet Water Temp. = 16 deg. (Ε.Τ. 10 deg./C.T. 40 deg.), Reverse mode for heating & cooling - voltage protection inbuilt-GI Cabinet powder coated for rust free use - Titanium heat exchanger in PVC shell - compressor for higher cop-smart touch control panel. Microprocessor Bassed, IP55, With Sort Ckt, 10 w flow rate, overload, Earth Fault Protection. | - | No. | - | - |
| 0.0 | SITC of Water Circulating Pump with Flow rate: 22-25 m3/hr @ Suitable Head (Actual capacity may differ as per site requirements) | - | No. | - | - |
| 0.0 | Plumbing work as per Requirement of site, | - | Job | - | - |
| 0.0 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes Having Thermal Stability for hot and cold water supply and all CPVCplain and brass threated fittings, including Fixing the pipe with clams at 1 m spacing. This includes Jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per Direction of Engineer In Charge. | - | Mtr | - | - |
| 0.0 | Providing and fixing Gun Metal Gate Valve with C.I. wheel of Approved Quality (scruwed end) 50 mm nominal bore | - | No. | - | - |
| 0.0 | Providing and fixing Gun Metal Non Return Valve with C.I. wheel of Approved Quality (sc@wed end) 50 mm nominal bore | - | No. | - | - |
| 0.0 | Supply and errection of factoty fabricated dust and vermin proof floor mounting panel complete with following rating and breaking capacity 36 KA 01 No, 100 amp 4 Pole MCCB As Main Incommer, and 04 No, 32/40 Amp/ 25 KA 4 pole MCCB as Outgoing with thermomagnetic release and terminal spreaders digital ameter, voltmeter selector switches and suitable size Al. Busbar as per 8623 insulated with heat shrink sleeving & mounted on non hygroscopic support in cubicle panel board Including drilling holes in cubicle panel, making connections, etc. as required. The Job includes the grouting of the board as per direction of engineer in charge. the switch board shall be fabricated with CRCA sheet with a minimum thick ness 1.6 mm/2 mm cubical type switch board. Main Panel Switch Gear. | - | No. | - | - |
| 0.0 | Supply Installation Testing nad Commissioning of 100 Amp, 36 ΚΑ Breaking Capacity, 4 Pole MCCB, With thermal magnetic release in the Existing Main Panel, to Supply the power to the Distribution Panel for Heat pump System For Sweaming Pool. | - | No. | - | - |
| 0.0 | Supplying, Laying, testing and commissioning of 3.5 core 70 sq.mm, Aluminium Conductor, XLPE insulated, PVC sheathed, steel armoured, Cable 1.1 kV grade, FRLS compliant LT power cable conforming to IS 7098 (Part- 1), including drawing and laying the cable in the existing masonry-protected DWC/HDPE pipe network, ensuring uniform pulling, proper bend radius, mechanical protection of armour, Identification tagging, continuity verification, Insulation resistance testing, and completing the work as per IE Rules, site engineering practice and standard specifications, all complete.3.5 Core 70 Sq mm XLPE AI Armoured Cable | - | Mtr | - | - |
| 0.0 | Supplying, Laying, Testing and Commissioning of 4 core x 10 sq.mm Aluminium Conductor, XLPE insulated, PVC sheathed, steel armoured Cable 1.1 kV grade, FRLS compliant LT power cable conforming to IS 7098 (Part-1), including drawing and laying the cable in the existing masonry-protected DWC/HDPE pipe network, ensuring uniform pulling, proper bend radius, mechanical protection of armour, identification tagging, continuity verification, insulation resistance testing, and completing the work as per IE Rules, site engineering practice and standard specifications, all complete 4 Core 10 Sq mm XLPE Al Armoured Cable | - | Mtr | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.35 MB
Technicalbid.pdf
Tender Documents • 11.63 MB
BOQ_110811.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid