State Plan-2023-24 - Construction of bore well, Supply, Erection, and Commissioning of Submersible motor pump set for bore well at STP, Chakkumkandam, Guruvayur - General Civil Work

Amount

Bore well Estimate

OD174560/2023-2024:Drilling Overburden with suitable size Bit accomodate well casing pipe by Rotary Method

OD174567/2023-2024:150mm dia drilling in hard rock inclusive of hire charges for machinery and all other accessories and stores putting up temporary shed and storing the equipment, cost of fuel , oil and other incidental items to complete the work but excluding the cost of casting pipe etc.. complete

OD174576/2023-2024:Supply and erecting of 180mm ( 8kg/cm2) ISI marked pipe as casting pipe including all cost, conveyance charge , labour charge etc..

OD174578/2023-2024:Supply and fixing on 180mm PVC end cap

OD236490/2023-2024:Conducting yield test

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.98.210:Supply of PVC Pipe, 6kg/cm2, 50mm Dia.

100.98.236:Supply of PVC Pipe, 10kg/cm2, 90mm Dia.

OD221340/2023-2024:Cost of PVC Specials 3%

100.9.5:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 50 mm nominal outside diameter pipes.

100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.

18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

12.1.1:Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m2

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

SAJU JOHN N

Bidder Name

SAJU JOHN N

TONY P THEKKINIYATH