Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-AOC | ₹1.7 L | L1 | Accepted-AOC done |
| 2 | L2₹1.9 L+₹16,817.94 (9.89%)Rejected-Finance | ₹1.9 L+₹16,817.94 (9.89%) | L2 | Rejected-Finance Rejected |
| 3 | L3₹1.9 L+₹21,271.12 (12.5%)Rejected-Finance | ₹1.9 L+₹21,271.12 (12.5%) | L3 | Rejected-Finance Rejected |
Tender Value
₹1.9 L
EMD Value
₹3,800
Closing Date
16 Jun 2022, 12:00 pmClosed
Executive Engineer SYL WS Division Ambala
Ambala
Various maintenance works of pump house no. 2 of Kanwala Disty
2022_HRY_225325_1
10/06/2022
Open Tender
Civil Works
Item-rate/Agreement basic
30 days
Ambala
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
₹3,800
Yes
18 Aug 2022
11 Jun 2022
16 Jun 2022
11 Jun 2022
16 Jun 2022
11 Jun 2022
Amount
Finishing walls with water profing cement paint of required shade, New work (Two or more coat applied @384 kg/10 sqm
Finishing walls with water proofing cement paint of required shade:Old work (one or more coats applied @ 2.20 kg/1 O sqm) over priming coat of primer applied @ 0.80 litres/10 sqm complete including cost of Priming coat. Complete
Providing and fixing ISi marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300 x 16 mm
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 150x10 mm
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White vitreous chinaware Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
Providing and fixing vitreous chinaware dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous chinaware dual purpose WC pan with white solid plastic seat and lid with white vitreous chinaware flushing cistern and C.P. flush bend.
Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete , With residual type petroleum bitumen of grade VG -10,
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1: 1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1 :3 (1cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay non-modular brick tile of class sqm designation 10
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, One or more coats on old work
Reinforced cement concrete work in beams, floors, roofs above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size).
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level, Thermo-Mechanically Treated bars of grade Fe-500D kg or more.
Centering and shuttering including strutting, propping etc. And removal of form for, Suspended floors, roofs, landings, balconies
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purposeonly weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I Pipe
Suresh Singh
Jaswinder Singh Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .