roviding of pump shed, transformer and stabilizer with electric poles and wire at Nathipora S. No. 03 of Accorded estimate Viz. Electro-mechanical works at Nathipora LIS of MISD Sopore.

Amount

a. Electrification of pump House by means of P/F of 20watt or nearest rating (4 No.) LEDs inside and (4 No.) 20watt or nearest rating LEDs outside the pump house with wiring in 1.5 sq mm Cu conductor including PVC conduits / Channels having control in the form of switches of specific amperage and MCBs as per load in the DP box Make: Havells and Like that. The job includes p/f of 3 No. heating points and 3 No. charging points of specific amperage complete in all respects including 2.5 sq. mm cu conductor as per requirement. The job shall include providing and fitting of 400mm wall mount fan of Havells/bajaj Make or like that. The job includes providing of rechargeable lantern 20W or nearest rating, and rechargeable torch Ciska/Phillips/Havells or Like that. b. Providing and fitting of 19mm ply sheets to the walls of pump house of size 20ft x11ft upto 4ft height to the operator’s room and machine room including partition. The job also includes p/f of 19mm ply sheets to the ceiling of operators room of size 11ft x 12ft in the interior of the pump house of Nathipora LIS by means of cutting, drilling and MS striping wherever necessary and fixing on the angle frame fabricated out of ISA 40x40x5 angle (300kg approximately) as per site requirement by means of nuts/bolts and washers. The ply walls/ceiling shall be applied with single coat of wood primer and nut brown paint of superior quality. c. Fabrication, Providing and fitting of MS canopy as per site requirement at Nathipora LIS by way of erection of ISMB 100 or equivalent 12ft long 4 No. posts embedded in cement concreting as per relevant code, each fitted with gusset plate of required size and thickness at top. The vertical posts shall be provided and fitted with horizontal frame fabricated out of ISMC 100 channel by means of cutting and welding. The structure shall be provided and fitted with 3 No. single slopped double trusses with double base fabricated out of ISA 50x50x5 angle iron as per design by means of cutting and welding. The trusses shall be provided and fitted with purlins fabricated out of ISA 40x40x5 angle iron 6No. each 10ft long and covered with 0.4mm CGI sheets as per requirement 100sft approximately by means of J hooks and washers. The canopy shall be provided and fitted with resting stand fabricated out of ISMC 100 channels (10ft long 2 No.) for motor including channel brackets/braces made of ISMC 100 . The job includes providing and fitting of 2 ton capacity chain pulley block with 6m double fall lift globe/induff make of like that. The whole structure shall be applied with metal oxide and painted with golden brown colour of superior quality. d. Covering of front side of pump house wall by means of CGI sheets on angle iron frame fabricated out of ISA 50x50x5 angle iron using J Hooks and washers. The job shall include providing and fitting of hinged double door type (8x5)ft fabricated out of ISA 50x50x5 angle Iron to the entrance of the pump house with proper reinforcement and covered with CGI sheets (8ft long 3 No.) with proper locking arrangement inside out. The job includes fabrication of frame fabricated out of ISA 50x50x5angle iron to accommodate angle iron door. The pump house shall be cut out with two small windows with proper locking arrangement of suitable size. The job also includes p/f of M S Strip shutter of size 8ft x 5ft applied with metal oxide primer and two coats of superior paint .the shutter shall be properly greased, provided and fitted with 2 No. side locks. The job also includes p/f of soffit board out of CGI Sheets 0.4mm and fabrication of MS Staircase as per site requirement to the pump house out of ISA 50x50x5 angle iron including strips. e. Fabrication, providing and fitting of gantry from delivery side of pump house fabricated out of ISMB 150 girders 2 No. of standard length with cement bottoming as per requirement for lifting and shifting of equipments at site provided and fitted with horizontal beam with 2 ton capacity mono rail of reputed make. The job includes providing of 24 inch pipe wrench, 8 inch plier, 12 inch screw driver, ring spanners and double ended spanner 8 No. each of required size; make: tapparia.

M/S EURO LIGHT ENTERPRISES

M/s Sopore Engineering Works