Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹1.2 L+₹2,440.77 (2.06%)Rejected-Finance | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | BYJU R L1 | SREEJI . J L2 |
|---|---|---|---|---|---|
| 1.00Vehicle shed | |||||
| 1.00 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 0.38 | cum | 240.62 ₹92.4 Lowest | 245.56 ₹94.3 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.48 | cum | 8,626.4 ₹4,140.67 Lowest | 8,803.73 ₹4,225.79 |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 158.39 | kilogram | 108.99 ₹17,263.14 Lowest | 111.23 ₹17,617.94 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 183.91 | kg | 181.45 ₹33,370.47 Lowest | 185.18 ₹34,056.45 |
| 1.00 | 50.12.2.3:Providing & fixing poly carbonate multi wall plain sheet 5 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size ( 5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required. | 69.92 | sqm | 771.79 ₹53,963.56 Lowest | 787.66 ₹55,073.19 |
| 1.01 | OD185430/2025-2026:Supplying and fixing 200 mm PVC rain water gutter "Rectangular Type section"
including fitting with 32mx5m MS flat supporters at 1m interval etc. complete | 15.2 | metre | 335.76 ₹5,103.55 Lowest | 342.67 ₹5,208.58 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 31.11 | sqm | 153.98 ₹4,790.16 Lowest | 157.14 ₹4,888.47 |
Tender Value
₹1.3 L
EMD Value
₹3,178
Closing Date
18 Aug 2025, 6:00 pmClosed
Assistant Engineer
Assistant Engineer, LID and EW Section , Clappana Grama Panchayat
Annual Plan-2025-26, Clappana GP, Project No 95-Construction of Vehicle shed and Generator shed in Gramapanchayat office
2025_LSGD_782653_1
95/AE/LSGD/CLP/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Clappana Grama panchayat
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹3,178
Yes
22 Sept 2025
8 Aug 2025
20 Aug 2025
8 Aug 2025
18 Aug 2025
8 Aug 2025
Amount
Vehicle shed
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
50.12.2.3:Providing & fixing poly carbonate multi wall plain sheet 5 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size ( 5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required.
OD185430/2025-2026:Supplying and fixing 200 mm PVC rain water gutter "Rectangular Type section" including fitting with 32mx5m MS flat supporters at 1m interval etc. complete
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
SREEJI . J (BID ID -2293068)
Bidder Name
BYJU R
SREEJI . J
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1284280.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .