Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹15,724
Closing Date
13 Oct 2026, 11:00 am6d left
Executive Engineer
JSD KATRAIN
Restoration of rain damages to FIS Lower Seobag GP Gahar in Tehsil Distt Kullu HPSH CO CC main channel at RD 695 to 845 150 mt and providing laying jointing testing of HDPE pipes 255 mm dia at RD 615 to 695 mtrs
2026_HPIPH_144891_1
5276-5310 dated 01-10-2026
Open Tender
Civil Works
Item Rate
KATRAIN
Please refer Tender documents.
2 documents required · 2 mandatory
₹350
Yes
₹15,724
Yes
3 Oct 2026
3 Oct 2026
13 Oct 2026
3 Oct 2026
13 Oct 2026
3 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations, trenches etc., in earth work lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres to the entire staisfaction of Engineer-in-charge with in all leads and lifts. | 50.63 | Cum | - | - |
| 2Providing and laying cement concrete linning fifteen centimeters or less for irrigation channel using mixture of cement concrete 1:2:4( 1cement :2 sand :4 graded crushedstone aggregate 20mm nominal size) excluding extra allowances for form work in concrete linning within all leads and lifts as per the instructions of the Engineer-in-charge. | |||||
| 2.01 | Hand mixed concretre lining in bed | 37.43 | Cum | - | - |
| 2.02 | Hand mixed concrete lining in side slopes. | 13.5 | Cum | - | - |
| 3 | Extra allowances for form work in concrete lining on side slopes within all leads and lifts as per the instructions of the Engineer-in-charge. | 120 | Cum | - | - |
| 4Providing, laying, jointing and testing of HDPE pipes in trenches to required grades as per IS: 4984-2016 latest with up to date amendments of following OD pipes, material grade and class of pipes. The jointing of pipes should be done by way of butt fusion welding as per relevant IS code and specifications including all fittings and accessories complete in all respect. | |||||
| 4.01 | 225mm dia PE-80, PN-6.0 | 80 | Rmt. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.64 MB
tc3.pdf
Tender Documents • 0.07 MB
BOQ_215596.xls
BOQ • 0.31 MB
Form6.pdf
Tender Documents • 0.56 MB
Form8.pdf
Tender Documents • 1.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .