PROVISION OF TOILET BLOCK WITH 06 X WC,TOILET BLOCK,SEPTIC TANK SOAKAGE WELL AT 27 RR AT PATTAN UNDER GE 969 EWS.

Amount

Excavation in trenches in any type of soil, n.exc 1.50 M wide and n.exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engineer-in -charge.

M&L plain cement concrete type D2, 1:4:8 (40 mm graded stone aggregate) in foundations filling and mass concrete complete all as specified and directed by Engineer-in -charge.

Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25 cmcomplete all as specified and directed by Engineer-in -charge.

Removing of excavated soil not exceeding 50 m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and directed by Engineer-in -charge.

M&L Damp proofing course to horizontal surface inceluding necessary formwork in cement mortar 1:2:4, type B-0, 40mm thick complete all as specified and directed by Engineer-in -charge.

M&L Precast cement concrete block masonry with soild blocks type C1 , 1:3:6 (using 20mm graded stone aggregate) masonry exc. 10cm in width and setting in cement mortar 1:6 all as directed.

M&L Precast cement concrete block masonry with soild blocks type C1 , 1:3:6 (using 20mm graded stone aggregate) masonry 10cm in width and setting in cement mortar 1:4 all as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in -charge.

M&L for rendering 15 mm thick on brick work surfaces other than fair faces of brick work in cement mortar 1:6 complete all as specified and directed by Engineer-in -charge.

Preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L 75 mm thick cement concrete type D2, 1:4:8 (using 40 mm graded stone agg) as in sub base of flooring, complete all as specified.

M&L 75 mm thick cement concrete type C2, 1:3:6 (using 20 mm graded stone agg) as in plinth protection and similar works including finishing the surface of concrete topping even and fair, without using extra cement compoete all as specified.

Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (unframed work) Fe-290 (Gde-E-165)

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia

Mild steel TMT bars 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia complete all as specified and directed by Engineer-in -charge.

M&L for form work to sides and soffits of floor or roof beam, haunchings, girders, bressumers, lintels, cantilvers etc,also splays between floor and beams, etc, in rough finished surface of concrete complete all as specified and directed by Engineer-in -charge.

M&L for RCC ,Nominal Mix 1:1.5:3 (20 mm graded stone aggregate) as in beams, column, cantilvers, brassumers, lintels over 1.50m span and the like complete all as specified.

S&F 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 120 fixed with J or L hooks complete all as specified and directed by Engineer-in -charge.

S&F 0.80mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 complete all as specified and directed by Engineer-in -charge.

S/F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified.

S&F factory made solid PVC door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2020 complete all as specified and directed by Engineer-in -charge.

S&F 125 mm long cast type anodised aluminium handles

M/L MS butt hinges 100 medium weight cold rolled etc.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section

S&F300 mm long Aluminium alloy sliding bolt with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast alu alloy. fabricated type, anodised 300 mm long all as directed.

Providing 25 mm thick cement concrete Type B-1, 1:2:4 (20 mm graded stone agg) including finishing the surface even and rough, complete all as specified.

Non skid coloured ceramic tiles 300x300x6-7 mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:, complete all as specified

S&F glazed ceramic coloured tiles in verticles surfaces of size 450x300x7 mm thick set and jointed in neat cement slurryy and pointed white or coloured cement to match tile surface over and including 10 mm thick plaster in cement andsand mortar 1:4, complete all as specified.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 75 mm bore pipe

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 110 mm bore of pipe

S&F for PVC (SWR) bend with access door inluding jointing with solvent cement 75 mm bore complete all as specified.

S&F for PVC (SWR) bend with access door inluding jointing with solvent cement 110 mm bore.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore complete all as specified.

S&F Vitreous china squatting pan "Orissa pattern" size 580x440 mm white with integral foot rest(exclding flushing cistern and flush pipe) including connection to trap, etcand to flushing pipe 90 mm long, sntysyponage pipe, etc, complete making good to floor.

S&F PVC low level flushing cistern , sypmhonic action type, 10 ltr capacity with inlet ball valve and float and handle and including brackets & PVC bend pipe 90 cm long etc, complete all as specified.

S&F vitreous China wash basin, white, oval shape size size 550 x 400 mm including pillar tape, waste fitting chromium plated brass and rubber plug, procelain stopper, a pair of CI brackets, waste pipe and waste cupling of 32 mm dia of PTMT (half or full threaded) (min wt 45 grms) etc. Complete all as specified.

S&F PVC connection 15 mm size, length 450 mm, with PTMT nuts,complete all as specified.

S&F 20 mm bore stop valve fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified.

S&F 15 mm bore angle cock, fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified.

S&F 1000 ltr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -Icomplete all as specified and directed by Engineer-in -charge.

S/F 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 25mm-210 gms, complete all as specified and directed by Engineer-in -charge.

S&F 20 mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in floors.

S&F 25 mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in floors.

S&F urinal, full vitreous China , white and full incl white lipe etc. complete all as specified and directed by Engineer-in -charge.

M& L 20 mm thick granite polished in wash basin counter and fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

S&F IInd class soft wood as in Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed by Engineer-in -charge.

M&L PCC 1:3:6 type C-2 using 40mm graded stone agg in foundation and mass concrete. complete all as specified and directed by Engineer-in -charge.

M & L Brick work with sub class 'B' burnt bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM 1:4 complete all as specified and directed by Engineer-in -charge.

M & L 1:2:4 types B-1 (using 20 mm graded stone agg as in coping etccomplete all as specified and directed by Engineer-in -charge.

M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed by Engineer-in -charge.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia complete all as specified and directed by Engineer-in -charge.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with WPC, finished even and smooth complete. (WPC shall be measured and paid separately).

Supply only integral water proofing compound complete all as specified and directed by Engineer-in -charge.

Cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in surface channels, drains etc. complete all as specified and directed by Engineer-in -charge.

Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc complete all as specified and directed.

M & L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in -charge.

LLDPE Septic tank exc inordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all arround/fiber reiforced cover with angle iron frame vent shaft and sludge chamber etc complete for 20 users complete all as specified as per Manufactures instructions complete all as specified and directed by Engineer-in -charge.

SSoakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M dia X 3.0 M effective depth complete all as specified and directed by Engineer-in -charge.

Supply & Fixing GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed, for the following size:- (a) 25 mm dia

(b) 20 mm dia

S&F of stop valves/gate valves, cast copper alloy, screwed down, crutch or butterfly handle with high pressure, screwed both ends for iron pipe or unions and fixed complete including taking down of old one suitable for following sizes (a) 20 mm dia

(b) 25 mm dia

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminiumconductor served with an inner sheathing of PVC tape armoured with galvanised steel wire 4 mm dia or tape and overall PVC sheathed 10 sq. mm 2 Core nominal cross section inservice connections

S & F House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two no 90 Degree bends. M.S hook and stay or guy including taking down.

Point wiring with 1.5 Sqmm multistrand, FRLS copper conductor cable, PVC insulated and unsheathed, drawing in and including PVC Casing Capping 20 mm dia medium grade ISI marked with all accessories such as bends, elbows reducers, pressed steel/ MS terminal boxes factory made 1.6 mm thick dully painted in rectangular shape appropriate size (having wall thickness of conduit not less than 2.00 mm) for one light/ fan point controlled by one 5 Amps switch one way, covered with 3 mm thick plastic laminated sheet top cover for mounting switches, sockets requlators etc and continous PVC insulated and unsheathed 1.5 Sqmm FRLS copper conductor cable multistrand as earth wire, complete all as specified for one light/fan/exhaust fan point

Point wiring with 2.5 Sqmm multistrand, FRLS copper conductor cable, PVC insulated and unsheathed, drawing in and including PVC concealed conduit 20 mm dia medium grade ISI marked with all accessories such as bends, elbows reducers, pressed steel/ MS terminal boxes factory made 1.6 mm thick dully painted in rectangular shape appropriate size (having wall thickness of conduit not less than 2.00 mm) surface type, for 3 pin socket outlet, covered with 3 mm thick plastic laminated sheet top cover for mounting switches, sockets requlators etc and continous PVC insulated and unsheathed 2.5 Sqmm FRLS copper conductor cable multistrand as earth wire, complete all as specified.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S & F fixed in repair Switch piano, flush type single pole, one way 5/6 Amp.

S & F fixed in repair scoket multipurpose 3/5 pin 15 amps flush type complete all as specified and as directed.

S & F fixed in repair switch piano flush type 15 amps single pole one way complete all as specified and as directed.

Lamp holder, PVC/ polycarbonate type with black plate suitable for batten fittings complete all as specified.

Celing rose surface bakelite 65 X 50 mm Three terminal complete all as specified and directed by Engineer-in -charge.

LED Lamp 7 Watts 230 Volts 50 Hz complete all as specified and directed by Engineer-in -charge.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Sheet metal enclosure for 4 way DBs when MCB to be used single phase 240 volts, double door complete all as specified and as directed.

MCB single pole of capacities 6 to 32 amp, 240 volts complete all as specified and as directeed.

MCB single pole & neutral of capacities 10 to 40 amp, 240 volts complete all as specified and as directeed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m all as specified and directed

Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connecting with galvanizing iron & steel GI earth wire 4 mm dia by means of bolt nut check nuts and washers of galvanised iron, 15 mm dia GI Pipe for protection to earth lead including PCC with 1:2:4 type B1 using 20mm graded stone aggregate CI frame and cover of angle iron 25 X 25 X 3 mm with 6 mm dia MS bar made to shape GI medium 20 mm bore pipe for watering in any type of soil returning filling in and removal of surplus soil to a distance n.exc 5.0 mm all as per electric plate no.3 of SSR 2009 Part I connected to earth test point all as specified and indicated including testing on completion.

M/S GHULAM HASSAN MALIK

M/S MUBASHIR SHABIR WANI