SRM rd IQ repair

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of :

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing ::

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Instead of pointing the joint with white cement.

Size of Tile 300x300 mm

Dismantling carefully white vitreous china pedestal type water closet (European type W.C. pan) including flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and re fixing the WC after completing the tile flooring work etc.

Providing and fixing PVC floor trap of self cleansing design with PVC screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.

100 mm inlet and 50/75 mm outlet

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing table top/Counter top wash basin with 15 mm CP pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China over counter wash basin of size up to 600x400xc200 mm of Hindware or equivalent with single 15 mm CP Flora pillar cock of Hindware or equivalent

Providing and fixing unplasticised PVC connection pipe with brass unions :

30 cm length and 15 mm nominal bore

Providing and fixing PTMT stop cock of approved quality and colour.

15 mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing PTMT pillar cock of approved quality and colour.

15 mm nominal bore, 107 mm long, weighing not less than 110 gms

Providing and fixing PTMT bib cock of approved quality and colour

15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing PTMT health faucet of approved quality and colour

15mm nominal bore

Providing and fixing PTMT swiveling shower, 15 mm nominal bore, weighing not less than 40 gms

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

Single socketed pipes - 75 mm diameter

Single socketed pipes - 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler - 110 mm

Coupler - 75 mm

Single tee with door - 110 mm

Single tee with door - 75 mm

Bend 87.5° with door - 110 mm

Bend 87.5° with door - 75 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

110mm dia meter

75 mm dia meter

Dismantling of flushing cistern of all types C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Servicing the existing Hykon solar water heater system including replacing two numbers of damaged ceramic tank by new stain less steel tank of capacity 170 litres each and replacing one number damaged glass tube and CPVC outlet and vent pipes and fittings of diameter up to 25mm, Fixing and clamping the air vent in adjacent GI pipe and making the system in good condition by engaging authorised hykon service personnel etc. complete as per the direction of Engineer in charge. ( cost of CPVC pipes and fittings shall be paid separately)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall - 20 mm nominal dia Pipes

Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal outer dia pipes

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Providing and fixing aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.

Servicing of aluminium window glazed shutter of size up to 0.60m X1.00m including replacing the old neoprene/EDPM /rubber beading with new item etc. complete as per the directions of engineer- in-charge

Melamine polishing on wood work (one or more coat).

Providing water based, solvent free, odourless, epoxy resin protective coating to damp walls by applying two part Water Based Epoxy Protective Coating of approved brand and manufacture (Sikagard 67 or equivalent) ,in two coats as per manufacture's specification etc. complete all as per the direction of the Engineer-in-Charge.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coats

Providing, making and fixing of Horizontal Blinds for window openings approved manufacturer with necessary fasteners and spacers on Aluminium rails with nylon fittings and tiltable and foldable arrangements as a covering for outside glazing of approved brand with approved coloured, quality and make fabric including necessary hardware, pulling chain etc. complete as per detail drawing, as specified and as directed by Engineer In charge.

Providing and fixing sun control film of thickness 1.5mm of approved make, colour and with self adhesive to glazed windows, doors and partitions as approved and as per the directions of the Engineer-in-charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Replacing the old furnishing fabric of sofa with new fabric including providing 50mm synthetic rubber form complete as per direction of Engineer-in-charge.

For single sofa of size up to 60cmx60cm.

Replacing the old furnishing fabric of sofa with new fabric including providing 50mm synthetic rubber form and 12mm marine plywood complete as per direction of Engineer-in-charge.

For single sofa of size up to 60cmx60cm.

Replacing the old furnishing fabric of chair with new fabric etc. complete as per direction of Engineer-in-charge.

For chair of size up to 60cmx60cm

Applying priming coat:

With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work

Providing and fixing aluminium Handle cum lock 75mm size for aluminium windows with SS screws etc. complete as per direction of Engineer-in charge

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.

Supplying and placing in position Foam Coir Mattress of thickness not less than 10cm as per the manufacturer's specification all complete and as per the directions of the Engineer -in-Charge.

198cm x 92cm

198cm x 182cm

Supplying and placing in position Microfibre Solid Sleeping Pillow of nearer size 68cm x 43cm or equivalent as per the manufacturer's specification all complete and as per the directions of the Engineer -in-Charge.

Supplying M/s Raymond Home Cotton Single Bed Sheet with 1 Pillow Cover or equivalent as per the manufacturer's specification all complete and as per the directions of the Engineer -in-Charge.

Supplying M/s Raymond Home 1 Single Blanket or equivalent as per the manufacturer's specification all complete and as per the directions of the Engineer -in-Charge.

Supplying Magic Home Bathroom Door Mats Anti Slip Water Soak of Size 40cmX60cm made of Microfiber beige colour of high pile of weave type tufted or equivalent as per the manufacturer's specification all complete and as per the directions of the Engineer -in-Charge.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material viz old mattresses, pillows and bed sheets etc. by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10km for all lifts, complete as per directions of Engineer-in-charge.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

100 mm dia pipe

Credit the value of cost of CI pipe to the contractor

Providing mosquito net shutter with approved aluminium frame made of fibre glass net of saint gobain or equivalent with aluminium hinges and locking arrangement to the Aluminium window opening of size up to 0.5m X 1.00m etc. complete as per the direction of engineer in charge.

Providing, mixing and applying factory designed 2 part Elastomeric water proofing system of Sika, FOSROC ,Dr Fixit or equivalent )make etc. complete all as per the following procedure and as directed by the Engineer in charge.

a)The Concrete surface shall be made free of contamination, oils and grease by applying high pressure water jet etc. and properly pre-wetted to a saturated surface dry condition. b) Mix the components part A and Part B in the ratio prescribed by the manufacturer in a clean container by slowly adding the powder component to the liquid component and stirring with slow speed mixer for 3 minutes to make a slurry consistency. c) Dampen all the surface immediately ahead of application. Apply the first coat by spray or by hand using a stiff brush applied in the same direction and leave to harden for 2 to 6 hours. d) After hardening of first coat, Apply the second coat by brush applied in the cross wise direction. e)After the application of second coat, the area treated is cured for minimum of 3 to 5 days to ensure full cement hydration and minimize cracking.

Supplying and Providing BL WOOD Furniture Sheesham Wood Dressing Table with Mirror for Bedroom Living Room Vanity Make Up Tables with Drawer (Walnut Finish) of table size up to 110cmx35cmx75cm height with mirror of size up to 60cm x 90cm etc. complete as per directions of Engineer-in-charge

Clearing the blocks in man hole by taking out the solid sludge , repairing the channels and walls of manhole if required, cleaning and washing with water and burying the solid sludge at required location as directed by the engineer in charge.

Clearing the Banyan trees and or similar plants /creepers of girth up to 20 cm grown on the walls height up to 8metres and roof terrace of TE building including uprooting of plants and destroying the roots by applying acid and filling completely the void with cement mortar 1:3( 1 cement :3 fine sand )finished with flushing coat of neat cement , cleaning the terrace etc. complete as per the direction of engineer in charge

Cutting down safely and securely the following items of trees near compound wall at a height up to 8 metres from ground level and 2 metre horizontally from the edge of roof terrace without causing damage to the pedestrian/ vehicular traffic/ electrical installation and stacking the serviceable materials at site and disposal of unserviceable materials including loading and unloading up to a distance of 5km etc. complete as per the direction of engineer in charge . Necessary insurance coverage of labour shall be obtained before commencement of work.

1. Branches of Vaka trees having diameter upto 20cm and length up to 5 metre =3 no.s (Three) 2. Branches of Mango trees having diameter upto 15cm and length up to 6metre =7 no.s(Seven) 3. Branches of Vaka tree having diameter upto 25cm and length up to 6metre =4 no.s(Four) 4. Mango tree branches having diameter upto 20 cm and length up to 6metre =3 no.s (Three)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite stone slab colour black, Cherry/Ruby red a)Area of slab over 0.50 sqm

Providing and fixing 50mm dia PVC ball valve of Finolex or equivalent etc. complete as per the direction of engineer in charge

Providing and fixing Lid (cover) of size up to 50cm dia for sintex water tank etc. complete as per the direction of engineer in charge

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)