Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.3 LAccepted-AOC | L1 | Accepted-AOC Due to lowest accepted | |
| 2 | L2₹16.1 L+₹1.5 L (10.2%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹16.2 L+₹1.6 L (10.9%)Rejected-Finance C O CHOUDHARY 45 PEER BABA TARUSHAW ROAD HALWARA A D DISTT LUDHIANA PIN CODE 141106 PUNJAB | LUDHIANA | LUDHIANA | PUNJAB | 141106 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹16.7 L+₹2.1 L (14.3%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹18.3 L+₹3.7 L (25.1%)Rejected-Finance H NO 963 10 STREET NO 5 DEEP NAGAR CIVIL LINES LUDHIANA 141001 PUNJAB | LUDHIANA | LUDHIANA | PUNJAB | 141001 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
24 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge CG Complex Ludhiana-141001
REPAIR TO E/M INSTALLATION AT BADDOWAL UNDER AGE B/R BADDOWAL GE LUDHIANA
2022_MES_541390_1
GE/LDH-30/2022-23
Open Tender
Civil Works
Item Rate
270 days
Baddowal under GE Ludhiana
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹40,000
Yes
9 Sept 2022
27 Jul 2022
25 Aug 2022
27 Jul 2022
24 Aug 2022
10 Aug 2022
27 Jul 2022 - 9 Aug 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level). complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off thepremises complete all as specified and directed.
M&L for 40mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
S&F for glass dividing strips, 3 mm thick and 28mm wide complete all as specified and directed by Engineer-in-Charge.
M&L for 25mm thick PCC 1:2:4Type B-1 using 20mm graded stone aggregate as in sub base finished even and fair without using extra cement including necessary form work complete all as specified and directed by Engineer-in-Charge.
M&L for machine cut kota stone slab flooring 18-20 mm thick laid on screed bed 20 mm thick in cm (1:6) and jointed with greay cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing complete.
M&L for joint free non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M&L for joint free non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
M&L 50mm thick PCC 1:2:4Type B-1 using 20mm graded stone aggregate as in sub base finished even and fair without using extra cement including necessary form work complete all as specified and directed by Engineer-in-Charge.
M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laid over and including 25mm thick sand layer, including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.
M&L for providing, cement concrete, (Type B1, 1:2:4, 20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50sqm but not exceeding 4.00sqm each and removing from site all as specified & directed by Engineer-in- charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50sqm each and removing from site all as specified & directed by Engineer-in- charge.
S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F for anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified .
S&F for anodised aluminium grill Type -B ( 3.13 Kg/Sqm) (anodised transparent or dyed to required shade according to IS-1868 with minimum anodic coating of grade AC15) of approved designed/pattern with approved standard section and fixed to existing window frame with CP brass / stainless steel screw @ 200mm c/c, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per architectural drawings and the directions of Engineer-in-Chief.
S&F for sheet glass 5.5mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane all as specified & directed by Engineer-in- charge.
S&F for sheet glass 5.5mm , ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified & directed by Engineer-in- charge.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc all as specified & directed by Engineer-in- charge.
M&L for brick work with sub class ‘B’ old size bricks recovered from item No.21 above, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified & directed by Engineer-in- charge
M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified & directed by Engineer-in- charge
M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan to any radius in half brick thick built in cement mortar (1:4) all as specified & directed by Engineer-in- charge
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed by Engineer-in-charge.
M&L for rendering 12mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.
M&L for rendering 5mm thick on in cement mortar (1:3) on ceiling/ soffit of slabs finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge.
M&L for rendering 15mm thick on brick work or concrete surface in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge
M&L for Dubbing out in cement plaster (1:4) of average 10mm thick on irregular face of walls complete all as specified & directed by Engineer-in-charge
M&L for preparing newly plastered or pointed surface of ceiling and applying two coats of white wash complete all asspecified & directed by Engineer-in-charge.
M&L for preparing newly plastered or pointed surface of walls and applying three coats of white wash complete all asspecified & directed by Engineer-in-charge.
M&L for prepration of newly plastered or pointed surface of walls and applying two coat of cement base paint complete all as specified & directed by Engineer-in- charge.
Taking down eaves gutters and rain water pipes including all fittings and size and pattern complete all as specified & directed by Engineer-in- charge.
Supply & fixing for 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to walls complete all as specified & directed by Engineer-in- charge.
Supply & fixing for PVC (SWR) bend 110mm bore of any redius complete all as specified & directed by Engineer-in- charge.
Dismantling mild steel rolling shutters, doors gates and the like complete all as specified and as directed by Engineer-in-Charge.
S&F for steel rolling shutters of thickness of laths 1.00mm , with out ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide channels, stopper, handles, lock plate,sliding lock-2No. on each rolling shutter, 2 No. of bracket plate on each rolling shutter,, u-clamp, pulley as per requirement and one shop coat of primer; erected in position as indicated, complete: push pull or manual type (as per drawing No.CEJZ/TD-1095/08 Sheet no. 1/2 & 2/2) complete all as specified and as directed by Engineer-in-Charge.
S&F for ball bearing for rolling shutters complete all as specified and as directed by Engineer-in-Charge.
S&F for helical wire spring with new 8 gauge helical wire spring complete all as specified and directed.
M&L for preparing steel and iron surfaces (new) of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified & directed by Engineer-in- charge.
PARDEEP CONSTRUCTION COMPANY
PREM CONSTRUCTION COMPANY
GURU NANAK CONSTRUCTION CO.
ANUJ ABROL CONTRACTOR
JAY ANN CONSTRUCTION COMPANY
H G CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .