Scheduled Caste Sub-Plan(SCSP), 2024-2025

Supply and Transportation of 7.5 HP, 12-16 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I. With Reputed Make.

Fabrication, Transportation and Supply of Wall Mounted Control Panel Board of Upto 7.5 HP with DOL Starter of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable Capacitor With Reputed Make.

Installation Charges of Pupmpsets, Including Erection Charges, Earthing and Testing etc. Complete as Directed by the Engineer in charge of work.

Supplying & fixing of 3 Core 2.5 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. With Reputed Make.

Supply and Transportation of 16 Sq mm x 4 Core following XLPE insulated, 1100V grade Armoured Aluminum Cable as per Specification Confirming to IS:7098 (Part - I)./1554-I With Reputed Make.

Supply and fixing of 50mm GI ‘B’ Class Pipe of Various Sizes and Transportation anywhere in Andhra Pradesh, Excluding GST.

Supply, delivery and fixing Gunmetal (GM) Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 50 mm NB Size 2" including cost and conveyance of all materials charges and labour charges etc complete and as directedcted by the Engineer in charge of the work.

Earthwork in Excavation for Structures as per drawing and Technical Specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious Material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable Material as per Technical Specification 305 MORD / 304 MORTH for foundations of C.C Drains and Culverts, Pipeline Trenches Ordinery soils-Mechanical Means upto 3.00m Depth.

Earthwork in Excavation for Structures as per drawing and Technical Specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious Material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable Material as per Technical Specification 305 MORD / 304 MORTH for foundations of C.C Drains and Culverts, Pipeline Trenches Ordinery soils-Manual Means upto 3.00m Depth.

Filling with Sand in Trenches, Sides of Foundations and Basement with Initial Lead in Layers Not Exceeding 15cm thick, Consolidating each Deposited Layer by Watering and Ramming Including Cost and Conveyance of Water to Work Site and All Operational, Incidental, Labour Charges, Hire Charges of T & P etc., Complete for Finished Item of Work. (APSS NO. 309 & 310).

Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 8 Kg / Sqcm - HDPE PE 100 grade.

Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.

Supply & Delivery of Pipe Ends Long Neck 90mm Dia HDPE Fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete.

Supply & Delivery of MS Flanges 90mm Dia HDPE Fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete.

Supply & Delivery of Bends 90mm Dia HDPE Fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. Bends 90mm Dia.

Supply & Delivery of Tees 90mm Dia HDPE Fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete.

Supply & Delivery of Bolts and Nuts With Double Washers Including Taxes and Conveyance etc., complete. (1/2" TO 1")

Supply and delivery of 80 mm dia meter "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN- 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and per IS:1538. PN16 including transportation.

Lowering, keeping in position and fixing 80 mm dia meter of C.I Sluice Valves (with Cap / with Hand Wheel & Reflex Valves) excluding cost of Bolts, Nuts, Rubber insertion, sluice valve and tail pieces.