ELECTRIFICATION OF RESTAURANT/CAFETERIA AT CHINGUS

Amount

Supply, installation, testing and commissioning of light points/fan point/exhaust fan point by way of following items, three number of 1.5 sq.mm single core copper wire for phase neutral and earthing of each point, heavy duty 25mm PVC conduit/PVC batten with iron saddle, wooden box of required size, Hylam sheet as cover plate including fixing of piano type of switch on board after proper cutting of Hylam sheet,5/6 Amp. switch, indicator fixing and number of wooden box as per site engineer. Make of conduit- Anchor/Gupta, Make of Wire- Anchor/Havells/KEI, Make of switch- Anchor/Havells.

Supply, installation, testing and comissioning of light circuit in PVC conduit /PVC batten by way of three number of o4 sqmm single core copper wire for phase neutral and earthing of light board from DB to light boards etc. Make Havells/ Anchor/KEI

Supply, installation ,testing and commissining of power points in wooden box covered by hylam sheet with fixing of piano type of switch and sockets after proper cutting of Hylam sheet, wiring for power point to be held in PVC conduit/ PVC batten with iron saddle by way of following wiring for each phase, neutral and earthing the point. fixing and number of wooden box as per site engineer.

15/16 Amp. Power switch and socket power point by 2.5 sqmm single core copper conductor from DB to power point. Make Havells/ Anchor/ KEI

Supply and fixing of following Piano type switch socket on the existing switch box/cover including connections etc. as required.

5/6 Amp switch

3 pin 5/6 Amp socket outlet

Bell push

Providing and fixing of stepped type electronic fan regulator

Providing and laying of single core 1.5 sqmm copper wire for invertor wiring. Make- Anchor/Havells/KEI

Supplying and fixing brass batten/angle holder including connections etc as required. Make Anchor/Havells

Supplying and Fixing of 16 way Double door sngle pole and neutral sheet steel MCB distribution board, 240v in surface/ recess complete with tinned busbar, neutral bus bar, earthbar,dinbar, inter connections powder painted including earthing etc as required. Make Anchor/Havells.

Supplying and fixing 5A to 32A rating 240/415V, 10KA C curve MCB

Single Pole

Single Pole and neutral

Supplying and fixing call bell/Buzzer suitable for single phase 230 v complete as required. Make Havells/ Anchor

Providing and installation, testing and comissioning of ceiling fans including wiring the down rod of standard length upto 30cm with 1.5sqmm FRLS PVC insulated copper conductor single core cable. Including providing and fixing phenolic laminated sheet cover on the fan box etc as reqd. 1200mm sweep (make Havells/Crompton/Usha. Desginer fan, double ball bearing

Providing and fixing of voltage stabilizer 5KVA with technical specification/features I/P Voltage should be 90- 270 VAC O/P Voltage should be 230 + 5% AC With high & low voltage trip CKT Single variac with buck boost transformer Voltmeter to read I/P & O/P voltage MCB ON I/P cut including connecting of I/P & O/P with 2x10 sqmm cable required at site (servo transformer)

Providing and fixing of LED bulbs 15 wats make Havells/Crompton/Jaquar

Providing and fixing of T 5 LED 20 Watts 4 feet tube light complete job. Make Crompton/Havells/Jaquar

Providing and Fixing of geyser 35 litr make Havells/ Crompton

Providing/fixing of 2x16 sqmm twin flat aluminium conductor for service line. Make(Havells/Anchor)

Providing and fixing of LED flood lights. 80 watts Make (Crompton/Havells)

Earthing with G.I earth plate 600mmx600mm x6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement & watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

Providing & Fixing of Exhaust Fan 225mm sweep complete job Make Havells ,Crompton, Usha.

ARSHAD MEHMOOD