Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹39.3 L
EMD Value
₹50,000
Closing Date
20 Jan 2023, 12:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Managing director
KHRWS, General Hospital campus, Red cross Road, Tvpm - 695035
NHM - Labour Room Strengthening as per LaQshya Standards at MCH Alappuzha
2023_KHRWS_549350_1
103/2022-23/KHRWS
Open Tender
Repair and Maintenance Works
Item Rate
90 days
Alappuzha
Registration certificate of KHRWS
7 documents required · 7 mandatory
₹2,500
₹50,000
14 Mar 2023
13 Jan 2023
21 Jan 2023
13 Jan 2023
20 Jan 2023
13 Jan 2023
Amount
PANELLING & CUPBOARD WORK
50.9.12.1 : Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge.
od261443/2022_2023 : Supply& installation of 50 mm thick EGP Puff Panel of 0.80 mm EGP sheet on front side and 0.80 mm PCGI Panel on back side.Filling of all joints and cavities with epoxy filler and sanded flush to provide a seamless finish. Applied with minimum three coats of antibacterial , antifungal paint, wall glaze or equivalent to a minimum dry film thickness of 300 microns having overlap floor covering, ceiling system and door frames by 25 mm to provide a continous sealed surface(MAKE:SAIL/JINDAL)
od261444/2022_2023 : Supply,installation , testing and commisioning of PCGI (Powder coated Galvanized Iron ) Swing door in ICU & labour room(MAKE: METAFLEX/ALANTA)
od256550/2022_2023 : Providing and fixing SS auto hinges including all cost and labour charges etc. complete.
9.165.1 : Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
od256542/2022_2023 : Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS :12823 Grade 1 Type II in paneling fixed in aluminium doors , windows shutters and partition frames with CP brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge. Pre laminated particle board with decorative lamination on one balancing lamination on other side
9.147C.2 : Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately).<br> Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)
od256544/2022_2023 : Providing and fixing glazing in aluminium door,window,ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge.(Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5mm thickness
od256545/2022_2023 : Supplying and fixing sun control film over plain glass including all cost and labour charges etc. complete
od256537/2022_2023 : Providing and fixing Medical grade Curtain with rail system for segregating the cubicle area Powder coated 16 SWG aluminium track stainless steel hooks, powder coated suspenders etc. Imported high quality anti microbial and water repellent netted curtain.Dim.8 ft length x 5 ft width x 7 ft height Netted area length 1.5 ft from the top - for 1 cubicle.
od270822/2022_2023 : Supply & installlation of Pre Fabricated Modular Operation Theatre and sterilie corridor wall using 0.8 mm 304 grade SS sheets on both sides of the 50 mm thick puff panel. Filling of all joints and cavities with high quality silicone to provide a seamless finish. Extra quantity taken for closing the window openings
K. MOOSA
Bidder Name
K. MOOSA
Baiju A V
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_804828.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .