Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.3 LAccepted-AOC | 1 | Accepted-AOC WORK AWARDED | |
| 2 | 2₹8.4 L+₹9,876 (1.19%)Rejected-AOC | 2 | Rejected-AOC WORK AWARDED TO JAYAN | |
| 3 | 3₹8.6 L+₹31,078 (3.76%)Rejected-Finance | 3 | Rejected-Finance high | |
| 4 | 4₹8.7 L+₹45,973 (5.56%)Rejected-Finance ERA 114 TC 36 819 CHITHRALAYA CHAKRAPANIPURAM PUTHUKULANGARA PO UZHAMALAKAL THIRUVANANTHAPURAM | THIRUVANANTHAPURAM | KERALA | 695001 | 4 | Rejected-Finance high | |
| 5 | 5₹8.9 L+₹66,791 (8.08%)Rejected-Finance | 5 | Rejected-Finance high |
| Sl No | Description | Qty | Unit | palakkalgireesh L6 | SAJI P L5 | KIRAN S L4 | LANEESH .P L7 | JAYAN M M L1 | SURESH BABU K P L3 | SUVIN M P L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Appendix-I | ||||||||||
| 1.00 | 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet | 406.8 | sqm | 130 ₹52,884 | 37 ₹15,051.6 Lowest | 40 ₹16,272 | 140 ₹56,952 | 200 ₹81,360 | 60 ₹24,408 | 119.82 ₹48,742.78 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.86 | cum | 6,900 ₹12,854.7 | 9,000 ₹16,767 | 8,000 ₹14,904 | 8,500 ₹15,835.5 | 17,600 ₹32,788.8 | 8,400 ₹15,649.2 | 6,489.81 ₹12,090.52 Lowest |
| 1.00 | 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | 23.04 | sqm | 703 ₹16,197.12 | 500 ₹11,520 | 300 ₹6,912 Lowest | 480 ₹11,059.2 | 350 ₹8,064 | 825 ₹19,008 | 708.67 ₹16,327.76 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 435.2 | kg | 164 ₹71,372.8 | 150 ₹65,280 | 150 ₹65,280 | 160 ₹69,632 | 150 ₹65,280 | 145 ₹63,104 Lowest | 162.27 ₹70,619.9 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 2,413.14 | kg | 140 ₹3,37,839.32 | 150 ₹3,61,970.7 | 140 ₹3,37,839.32 | 155 ₹3,74,036.39 | 170 ₹4,10,233.46 | 135 ₹3,25,773.63 | 131.43 ₹3,17,158.73 Lowest |
| 1.01 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 508.4 | sqm | 656 ₹3,33,510.4 | 680 ₹3,45,712 | 700 ₹3,55,880 | 710 ₹3,60,964 | 185 ₹94,054 Lowest | 667 ₹3,39,102.8 | 591.74 ₹3,00,840.62 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 10 | metre | 413 ₹4,130 | 400 ₹4,000 | 400 ₹4,000 | 450 ₹4,500 | 700 ₹7,000 | 500 ₹5,000 | 397.04 ₹3,970.35 Lowest |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 182.27 | sqm | 120 ₹21,871.92 | 100 ₹18,226.6 Lowest | 100 ₹18,226.6 Lowest | 105 ₹19,137.93 | 200 ₹36,453.2 | 100 ₹18,226.6 Lowest | 115.84 ₹21,113.69 |
| 1.01 | 10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces | 1.78 | sqm | 4,199 ₹7,495.22 Lowest | 6,000 ₹10,710 | 4,800 ₹8,568 | 5,200 ₹9,282 | 4,500 ₹8,032.5 | 5,000 ₹8,925 | 4,212.93 ₹7,520.08 |
Tender Value
₹10.9 L
EMD Value
₹27,343
Closing Date
25 Aug 2025, 3:00 pmClosed
Assistant executive engineer
PWD SUBDIVISION KOZHIKODE
GENERAL- NGO quarters , Flat D25-36-USR and leak rectification work of flat D25-36 sheetroofing a t N G O q u a r t e r s Vellimadukunnu-General Civil Work
2025_PWD_787757_1
PWD/BLDG/TR/8003/2025_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
180 days
Vellimadukunnu
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,760
Yes
₹27,343
Yes
8 Oct 2025
18 Aug 2025
27 Aug 2025
18 Aug 2025
25 Aug 2025
18 Aug 2025
Amount
Appendix-I
15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
OD21959/2025-2026:Engaging labour for cleaning and other miscellaneous works
9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding
26.28.3:Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge25 mm average thickness
26.29.1:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter
26.31.1:Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
SUVIN M P (BID ID -2306978)
SURESH BABU K P (BID ID -2306716)
KIRAN S (BID ID -2304510)
SAJI P (BID ID -2307355)
palakkalgireesh (BID ID -2307357)
LANEESH .P (BID ID -2306878)
Bidder Name
SURESH BABU K P
SAJI P
LANEESH .P
palakkalgireesh
JAYAN M M
SUVIN M P
KIRAN S
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1296080.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .