BID DOCUMENTS FOR CONSTRUCTION WORK OF TOILET BLOCK AT DUMPING SITE OF DHARAMPUR NAGARPALIKA UNDER: 15 TH FINANCE SCHEME YEAR: 2021-22 (UNTIED) SAVING RUPEES GRANT.

Total Amount Rs.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor President Chief Officer

Dharampur Nagarpalika Dharampur Nagarpalika

Daharampur Daharampur

SECTION-7 BILL OF QUANTITIES-171

DHARAMPUR MUNICIPALITY, DHARAMPUR

NAME OF WORK :- ESTIMATION CONSTRUCTION WORK OF TOILET BLOCK AT DUMPING SITE AT

DHARAMPUR , DIST.VALSAD

Item Qty. Description Total Unit Amount

1 44.22 Excavation for base footings upto depth 1.5 m. including sorting out

Cmt. and disposing of the excavated material upto 50 m lead (loose or

soft soil) 117.08 Cmt.

2 7.78 Excavation for foundation for depth from 1.5 m to 3.0 m including

Cmt. sorting out and stacking of useful materials and disposing of fthe

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

3 43.71 Filling available excavated earth (excluding rock) in trenches. plinth,

Cmt. sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

4 8.25 Filling in foundation and plinth with murrum or selected soil in layers

Cmt. of 20cm thickness including watering, ramming and consolidating

etc. complete. 289.06 Cmt.

5 23.55 Carring out plinth treatment to post construction /

Smt. existing structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is recommended

i.e one litre 20 EC chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical emulsion appication at

the rate of 5 Litre chemical / Sqm of surface is recommended as per

6 8.19 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse

Cmt. sand : 6- Graded brick bat aggregate 40mm normal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth 2986.00 Cmt.

SBD SECTION-7 BILL OF QUANTITIES-172

7 Providing and Laying controlled cement concrete M-250 and curing

compound, including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in

a. 7.57 -- do -- for R.C.C. Column Footing 4532.88 Cmt.

b. 2.02 -- do -- for R.C.C. Column Up to pl 5916.58 Cmt.

c. 2.29 -- do -- for R.C.C. Column Super Structure 6039.80 Cmt.

d 2.38 -- do -- for Ground Beam 5831.74 Cmt.

e 0.61 -- do -- for Coping 6020.61 Cmt.

f 0.59 -- do -- for Plinth Beam 5831.74 Cmt.

g 1.11 -- do -- for R.C.C. Lintel 7533.59 Cmt.

h 0.72 -- do -- for R.C.C. Chhajja 7533.59 Cmt.

i 2.38 -- do -- for R.C.C. Beam 5723.67 Cmt.

j 3.22 -- do -- for R.C.C. Slab 6257.96 Cmt.

2610.00 Providing and supplying TMT Fe-500 bar steel reinforcment for

Kgs. R.C.C work including bending, binding and placing in position etc.

complete 76.21 Kg.

9 2.82 Brick work using common burnt building bricks having crushing

Cmt. strngth not less than 35 Kg./cm2 in C.M. (1:6) (1 Cement, 6 fine

sand) racking out joints curring etc. complete directed by Engineer-in-

10 13.87 Brick work using common burnt building bricks having crushing

Cmt. strngth not less than 35 Kg./cm2 in super structure for Ground Floor

in C.M. (1:6) (1 Cement, 6 fine sand) racking out joints curring etc.

complete directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-173

11 22.57 Providing, laying and constructing half brick masonry work with

Smt. conventional building bricks having crushing strength not less that

Kg./Cm2 for super structure for G.F. in cement mortar (1:4) (1

Cement, 4 fine sand) including ranking out joints, curing scaffolding

etc. complete. 599.84 Smt.

12 3.24 Providing and fixing glazed louverd glass windows and ventilators

Smt. with teakwood frame 10cm x 7cm size including the cost of oil

painting to wood work etc. complete.

13 3.78 Providing and fixing 35 mm thick shutters for Doors, windows and

Smt. clearstory windows including blackenamelled M.S. butt hinges with

necessary screws. (A) Indian teak wood. (i) Fully Panelled.

14 20.79 Providing and fixing FRP frame size 100x50 mm and 28mm thick

Smt. FRP depress panel shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is to be filed

up with injected fire retardant grade polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is to be water

proof weather proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve. 2377.76 Smt.

15 95.00 Providing and fixing M. S. grills of requried pattern to wooden frames

Kgs. of window etc. with M. S. flats at requried spacings and frame

alround square or round bars with round headed bolts and nuts or by

screws. (A) Plain Grills. 104.04 Kgs.

16 4.00 Painting two coats (including priming coat) on new steel and other

Smt. metal surface with synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other

foreign matter. 99.99 Smt.

17 145.59 Providing 15mm thick cement plaster in single coat on Rough

Smt. (Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar

1:3 (1-cement :4-sand) finishing with a floating coat of neat cement

SBD SECTION-7 BILL OF QUANTITIES-174

18 24.29 Providing 10mm thick cement plaster in single coat on

Smt. brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-

sand) finishing with a floating coat of neat cement slurry. 185.66 Smt.

19 94.47 Providing and Laying 20 mm thick sand face cement plaster on

Smt. Walls upto height of 10 mts. Above ground level consisting of 12mm

thicjk backing coat of C.M 1:3 (1 Cement, 3 Sand ) and 8 mm thick

finishing coat of C.M 1:1 (1 Cement, 1 Sand) etc. complete. 300.66 Smt.

20 169.88 Applying two coats of putty & two coats of primer of approved brand

Smt. and manufacture on new wall surface to give an even shade

including throughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

21 169.88 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface to give and even shade free from foreign

matter and also including preparing the surface even and smooth.

22 94.47 Finishing wall with Weather Proof Acrylic Emulsion Exterior Paint on

Smt. wall surface (two coat) to give and even shade and of approved

brand and manufacture including throughly brooming and brushing

the surface to remove all dirts, and remians of loose powdered

material. 65.25 Smt.

23 24.55 Providing and laying white glazed tiles 6 mm thick in flooring, treads

Smt. of steps and landing laid on bed of 12 mm thick cement mortar 1:3

(1 Cement : 3 Coarse Sand) finished with flush pointing in white

cement. 917.25 Smt.

24 130.51 Providing and laying white glazed tiles 6 mm thick in skirting risers of

Smt. steps and dado on 10 mm cement plaster 1:3 (1 Cement : 3 Coarse

Sand) and pointing in white cement jointed with white cement slurry.

25 4.60 Providing and laying polished kota stone slab 25mm thick in risers of

Smt steps, dado and pillars laid on 10 mm thick cement mortar 1:3 (1

Cement, 3 Coarse Sand) and jointed with grey cement slurry

including rubbing and polishing etc. complete.

SBD SECTION-7 BILL OF QUANTITIES-175

26 29.45 Providing and laying broken chine mosaic flooring for terrace using

Smt. 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

27 3.70 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2working

Rmt. pressure poluthene pipes of the following outside Dia.Low densidy,

complete with special falnge compression typefittings, wall clipsetc.

including making good the wall ceiling andfloor. (110mm) 336.24 Rmt.

28 2500.00 Providing erecting and fixing double coated ISI water tank of

Ltr. required capacity each with all necessary fitting sand connection etc.

complete on terrace 3.95 Ltr.

29 2.00 Providing and fixing wash down water closet (Indian Type W.C. Pan)

Each size 580mm with Viterous China 100mm size integral P or S trap

including jointing the trap with soil pipe in cement mortar 1:1 (

cement : 1 fine sand). Rates including Providing and fixing in cement

mortar 1:3 (1 cement : 3 fine sand) a pair of white viterous china

250mm x 130mm x 30mm footrest to long pattern squatting pan

water closet and 25mm dia chromium plates brass half turn flush

cock of approved quality etc. complete as directed. 1635.19 Each

30 2.00 Providing and fixing wash down water closet (European type W.C.

Each Pan) with integral P or S trap including jointing the trap with soil pipe

in cement mortar 1:1 ( 1 cement : 1 fine sand). Rates including

providing and fixing plastic seat cover with C.P. brass hinges and

rubber buffers, Jet spray heavy duty with S.S. braided hose 60 cm

long and 25mm dia chromium plates brass half turn flush cock of

approved quality etc. complete as directed. 2168.47 Each

31 2.00 Providing and fixing 430mm x 260mm x 350mm size white earthen

Each ware flat back or corner type urinal of approved quality including.

15mm Dia Stop Tap and Necessary Connections the urinal with 1242.30 Each

32 2.00 Providing and fixing white viterous china flat back wash basin of

Each 550mm x 400mm size with single hole for pillar tape with C.I. or M.S.

brackets painted white including cutting holes and making good the

same. Rates including providing and fixing 32mm dia C.P. Brass

waste couplin, 32mm dia M.I. Fisher unit, Brass screw down stop tap

of 15mm dia pillar tap capstan head, screw down high pressure with

screws, shanks, back nuts, PVC pipe & 32mm dia flexible waste

pipe up to Nani Trap etc. complete as directed by engineer in

charge. 2168.47 Each

SBD SECTION-7 BILL OF QUANTITIES-176

33 3.00 Providing and fixing screw down bib taps of following size.(A)Brass

Each screw down bib tap polished bright.(i)15mm dia..

34 3.00 Providing and fixing screw down bib taps of following size.(B) Brass

Each chromium plated screws down Bib Tap .(i) 15mm dia.

35 1.00 Providing and fixing gun metal chek or non return fullway wheel

Each valve. (A) 15 mm Dia. 186.83 Each

36 2.00 Providing and fixing C.P. brass towel rail complete with C.P. brass

Each brackets fixed to wooden pluges with C.P. brass screws (B) 600 mm

37 4.00 Providing and fixing toilet paper holder (A) C.P. brass.

38 4.00 Providing and fixing 100 mm dia sand cast iron grating for gully, floor

Each or nanhi trap.

39 4.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm. Inlet

Each and 50mm. Dia outlet having self cleaning design with C. I. Screwed

down or hinged grating and stainless steel jali at F.F.I. Including cost

of making cuts in walls slab floor etc. and making them as per

original testing etc. complete as directed by Engineer-in-charge.

40 4.00 Providing and fixing 150mm x 100mm size "P" or "S" type square

Each mount stone ware gully trap with c. I. Grating brick masonry chamber

and water tight C. I. Cover with frame of inside 300mm x 300mm

size with cutting and making good the walls floors etc. complete as

directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-177

41 1.00 Providing, laying and constructing brick masonry chamber for

Each underground C. I. Inspection Chamber with Inside Dimension

600mm x 850mm x 450mm dedo for single pipe line with bends

having crushing strength not less than 35Kg./Cm2 on C. M. (1:5) (1

cement, 5 Sand) C. I. Cover with frame (light duty) of 455mm x

610mm internal dimension total weight of cover with frame to be not

less than 38.00 Kgs. (Wt. of Cover 23 Kgs. and wt. of Frame

Kgs.) with R.C.C. top slab with 1:2:4 (1 cement, 2 Coarse sand,

graded stone (Kapachi) ) foundation concrete 1:5:10 (1 cement,

Coarse sand, 10 brick bats of 40mm nominal size) inside plaster

15mm. thick with C. M. 1:3 (1 cement, 3 Coarse sand) finished

smooth with a floating coat of neat cement slurry on walls and bed

concrete including curing etc. complete as directed by Engineer-in- 7180.44 Each

42 50.00 Providing and laying (To level or slopes) and jointing with stiff

Rmt. mixture of cement mortar in proportion 1:1 salt glazed stone ware

pipes including testing of pipes and joint complete. (B) 150 mm Dia

43 2.00 Providing and fixing 600 mm x 450 mm bevelled edge mirror of

Each superior glass mounted on 6 mm thick A.C Sheets or plywood sheet

and fixing to wooden pluge with c.p brass screws and wasers.

44 30.00 Providing, laying and jointing in true line and level 32 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

45 20.00 Providing, laying and jointing in true line and level 25 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. 91.84 Rmt.

46 5.00 Providing, laying and jointing in true line and level 15 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. 72.65 Rmt.

SBD SECTION-7 BILL OF QUANTITIES-178

47 2.00 Providing and fixing 15mm. Dia C. P. Brass screw down bib cock of

Nos. approved quality including fixing the same in pipeline and testing etc.

complete as directed by Engineer-in-charge. 186.83 Nos.

48 1.00 Providing and fixing 15mm. Dia C. P. Brass stop cock of approved

Nos. quality including fixing the same in pipeline and testing etc. complete

as directed by Engineer-in-charge.

49 1.00 Providing and fixing gun metal chek or non return fullway wheel

Nos. valve. (A) 25 mm Dia. 420.63 Nos.

SBD SECTION-7 BILL OF QUANTITIES-179

Sub Estimate :- Electrification Work

Sr No. Description Qty Unit Total Rate Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length

, in below type of pipe erected with 6A Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules erected on / in wall

/ ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires, in below type of pipe to be erected complete with earth continuity and

necessary connection with primary light with accessories erected on Metal / PVC /

2 wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / 5.00 Pt. 167.66

concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary

Point. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

4 below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board (f) with medium class Rigid PVC pipe and accessories erected concealed in 4.00 Pt. 510.05

wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

4.1 (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling 2.00 Pt. 745.38

complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected

5 on PVC / Metallic/Wooden box, single mounting base frame covered with textured / 3.00 Pt. 257.55

metallic/white front plate modules erected on / in wall / ceiling with following type

accessories Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires erected in below type of pipe with 6A Modular type switches and following type of

6 accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered 4.00 Pt. 603.98

with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete CAT. III

Providing following type of Modular Type Accessories mounted with PVC /

7 metallic/Wooden box, single mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(1)One No. SP 6 Amp. Cat.III 2.00 Ea. 151.50

7.1 (2) One No 5 pin plug Cat.III 2.00 Ea. 151.50

7.2 (9) 16 Amp. SP one way switch Cat.III 2.00 Ea. 180.79

7.3 (10) 6/16Amp. Universal socket Cat.III 2.00 Ea. 199.98

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to

8 be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed 35.00 Mtr. 33.33

with adhesive solution & Clamps with following dia of pipes, in approved manner as

directed (b) 25 mm

SBD SECTION-7 BILL OF QUANTITIES-

Sr No. Description Qty Unit Total Rate Amount

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

9 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) With medium class Rigid PVC pipe and

(a) 2 wire 1.5 sq. mm 25.00 Mtr. 62.62

Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or Heavy duty PVC

10 box erected flushed on wall or concealed in wall with necessary plastering & finishing as 8.00 No. 76.76

directed of following size. (b) 175 mm x 100 mm x 75 mm(d)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

11 IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used

of same company of MCB to be used) suitable for (B) three phase incoming and single

phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate

12.0 on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. 2.00 Ea 112.11

confirming to IS 8828/1996 with ISI Mark

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity

(a) 6 to 32 Amp. Cat.III 2.00 Ea 595.90

13.1 (b)40 Amp. Cat.III 2.00 Ea 668.62

13.2 (c)63 Amp. Cat.III 1.00 Ea 737.30

providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation

14 on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for following Max. rating erected

(i) 25 Amps.DP Cat. III 1.00 Ea 1969.50

14.1 (ii) 40Amps. DP Cat. III 1.00 Ea 2235.13

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel

15 duly powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals 2.00 Ea 446.42

for following type of RCCB, RCCB + MCB [b] For 4 Pole

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation

16 on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all 2.00 Ea 2834.06

advance feature & do not incorporate any electronic component for following Max. rating

erected as directed. [f] 63A, 4 pole Three Phase Cat. II

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium

Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm

(Rated current / cross section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with necessary bus bar supports

/insulators, main cable socket to each busbar,erected in existing cubical panel with

necessary connections. (D) Suitable for 400 Amp. Capacity

Providing and erecting required size Aluminium strip for earthing of H.T. , OCB / ACB /

Transformer, LT panel board, Motors etc. using copper clamp.

SBD SECTION-7 BILL OF QUANTITIES-

Sr No. Description Qty Unit Total Rate Amount

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty

cover. (A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge has to

19 ensure the value of earthing resistane mentioned in test Certificate) & having back filling 2.00 Ea. 8636.51

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing

in normal soil.

Length of Pipe : 3.00 mtrs

Back filling&Compound

Providing :2 nos

erecting 415 Bagsthree

V MCB of 25Pole

Kg. for Motor & Inductive Load (C Curve) having

20 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 2.00 Ea. 647.41

(b)40 Amp. Cat.III

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

21 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe

of following size of cables

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 10.00 Mtr. 385.82

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper

22 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe 50.00 Mtr. 510.05

at road crossing or floor of following size of cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper

23 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe 50.00 Mtr. 676.70

at road crossing or floor of following size of cables. (A) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

24 Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing 20.00 Mtr. 126.25

trench / pipe of following size of cables (B) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

25 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe 20.00 Mtr. 540.35

of following size of cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the

fault all over the run and back filling the same and making the surface as normal ground.

Providing & laying approved make Double walled corrugated pipes (DWC) of

27 polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same 25.00 Mtr. 62.62

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable (A)50 mm outer dia

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling

fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

with remote unit for Speed Control and all remaining accessories including safety pin, nut

bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge]

(B) 1200 mm Sweep (48")

Supplying & erecting single phase approved make industrial exhaust fan suitable for

29 medium duty ring mounted low noise operation suitable for medium duty having following 3.00 Ea 2054.34

dia size and maximum speed in RPM [A] 305 mm dia 900 RPM

Supplying & erecting single phase approved make industrial exhaust fan suitable for

medium duty ring mounted low noise operation suitable for medium duty having

following dia size and maximum speed in RPM

[A] 305 mm dia 900 RPM cat II

SBD SECTION-7 BILL OF QUANTITIES-

Sr No. Description Qty Unit Total Rate Amount

31 Providing suitable M.S. louver shutter of the Exhaust fan. 3.00 Ea 368.65

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(iv) 22-24 watts, Surge-2 KV Cat-lll 10.00 Ea 758.51

(ii) 11-15 watts, Surge-2 KV Cat-lll 8.00 Ea 427.23

(i) 5-9 watts,Surge-2 KV Cat-lll 15.00 Ea 220.18

Say Total Amount

Say Total Amount

SBD SECTION-7 BILL OF QUANTITIES-