Beautification of entrance area of administrative block A-09 at North Campus of IIT Mandi by providing display podiums, remodeling of entrance door etc.

Amount

Providing and fixing plain lining with necessary screws/nuts & bolts/nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). a) 12mm thick commercial ply conforming to IS : 1328 BWP type as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. a) Kiln seasoned and chemically treated hollock wood as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish SF grade with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. a) 1.5 mm thick as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing & fixing glass panes with putty and glazing clips in all complete with : a) 4.0 mm thick glass panes as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing & fixing glass panes with putty and glazing clips in all complete with : a) 5.5 mm thick glass panes as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete a) Hot finished welded type tubes as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. a) With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Painting with PU finished synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing & fixing Acrylic sheet 12mm thick finished paneling on any wooden surface/frame inculding fixing with necessary arrangement for fixing wall as per design/drawing as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Fabricating, Providing & furnishing of seating arrangement for 10 seats as per the space available at the site during the time of execution of wall panelling work. Under structure: Shall be made of combination of plywood & wood members. Plywood should be 12mm thick moisture resistance & termite proof & wood should be of cross section (22X25,22X40,25X75) and without major knots & defects on the surface 3.8 mm zigzag spring assy should be mounted on the seat structure with spring mounting plastic bracket. Elastic belt of 50mm width should used above the spring assy. to give good sagging effect. -Fabric should be stapled on the seat structure frame above the spring asly. Back vertical surface should be strapled with non-woven cloth to get surface to stick the foam. Complete under structure should be made by gluing & stapling. -Seat should be made of polyurethane(PU) foam with density 36 to 40 kg/cum having an additional top layer of super soft PU foam with density 18 kg/cum. Side: vertical surface; body front : taper vertical & top : horizontal surface should be glued with PU foam with density 28kg/cum. -Seat & body upholstery should be made in the dual tone colour with fabric/fabric option & fabric/leatherite option with prior approval of shade. -Under structure should be made of combination 12mm & 6mm thk. Plywood. It should be made with super soft PU foam with density 28 kg/cum. It should be upholstered with fabric. -Legs:stainless steel PP moulded legs should be used & fitted at the bottom surface with the chipboard screws as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Table frame made of teak wood.legs Lshape 70x70mm made of rectangular in combination of 25mm square and 50x25 rectangular teak wood on top. The top made of 75X25 teakwood frame with 10mm thick glass duly fitted in teakwood frame. The table is also having a shelf of 18 mm board. The table frame duly polishing in walnut melamine finish as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Side table frame made of teak wood, legs L shape 70X70mm made of rectangular in combination of 25mm square and 50X25 rectangular teak wood section attached with 50x25 mm rectangular teak wood on top. The top made of 75x25 teakwood frame with 10mm thick glass duly filted in teak wood frame. The table is also having a shelf of 18mm board. The table frame duly polished in walnut melamine finish as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Display rack Size 8' X 7' made up of pole shelving mechanism (EBCO make) having adjustable shelving made up of high density moisture resistant board with lamination. The rack also having cabinet with 6 drawers fitted in full extension telescopic soft close panels with handle profile as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Entry glass door with sensor with ozone mechanism opening of premium series Automatic door:ozone-111P-Plus having including accessories features of digital screen, easy adjusting working data, brushless DC motor, low noise. Five different functions with remote control function keypad: Always ope, half open, exit only, lock, normal open. Different tigering modes are available such as remote controller, safety beam sensor, push button, Access control etc. Max track length can be 6 meters and the passage width can be 3.00 mtr (approx.), adapting to most of the commercial entrances. Controller: Intelligent controller, updated chip processor, fast and low power consumption. Motor of easy connection and mounting (slide and flix) with fast connection head and 4 screws. Parameter can be visibly adjusted. Concise and fool-proof connection sockets for power and various signals including one year warranty on operator sliding system. Size of door=(2.40 X 2.40)mtrs as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing & fixing metallic finished wooden photo frame with photo given by the client/Authority as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Wiring for light point/ fan point/ exhaust fan point (Group C) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. a) 3 X 2.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. a) 3 X 4 sq. mm

Supplying and fixing of 25 mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. a) 1 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. a) 2 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. a) 3 run of cable

Wiring for group controlled (looped) light point / fan point / exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group-C

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing Single pole 5 to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of Single pole, in the existing MCB DB complete with connections, testing and commissioning etc. as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and installation of LED spot light 13 W 4000 K Premium category of spotlight with compact design, trimless housing that seamlessly merges with the ceiling as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Supplying and installation of Flexible led strips 36 W 6500 k 5 m with uniform light distribution and long lasting adhesive for perfect cove lighting solution Constant Voltage 12 V 3 A Driver for 36 W Strip as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts

Supplying and fixing RJ45 Socket Outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and installation of 20 W Aesthetically designed recessed mounted panel in a light weight plastic body as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts

ASHOKA FURNITURE PVT LTD (BID ID -3171426)