Special repairs replacement of HT OH line into HT UG network at OR md accn in Harding lines and CW lines and special repairs replacement of LT OH line into LT UG network at Angora Plus in sector B under GE Utility Ambala Cantt

Amount

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of under ground cable/ erection of poles or stays etc. complete all as specified and as directed.

Description all as per item No. 1 above but depth exceeding 1.50 metre and not exceeding 3.0 metre.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Supply and laying of un-reinforced, precast concrete cable cover, class HVP, type 2, with peak, size 300 mm x180 mm x40 mm complete all as specified and as directed.

Material and labour for fine and dry sand, cushioning for underground cable, by providing a layers of sand 8cm deep before laying and 15cm deep after laying the cable including stretching the cable and punning sand cushioning complete all as specified and as directed. Note - Punned thickness of sand layer shall only be measured and paid to contractor.

Material and labour for plain cement concrete 1:4:8, type D-2 (using 40 mm graded mechanically crushed stone aggregates) as in foundation, filling and mass concrete of poles, pits etc complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6, type C-1 (using 20 mm graded mechanically crushed stone aggregates) as in coping or pedastal of poles, pits etc complete all as specified and directed.

Dismantling and taking down/out of existing old unservicable air break gang operated switches vertical/horizontal mounted including insulators and operating mechanism for replacement complete all as specified and directed.

Supply, fix, testing and commissioning air break, gang operated, triple switch (GOD), outdoor type, vertical mounting type, of capacity 200 Amps with drop out fuse consisting of 12 insulators, ISI marked, mechanically operated for horizontal or vertical mounting on insulator and steel frame with GI operation rods of suitable length and size, with operating mechanism worked from ground level, with locking arrangement including Godrej padlock with two keys with fuse carrier and HT fuse element having 200 Amp rating suitable for HT 11000 volts, 50 Hz, AC supply, 3 phase including all necessary electrical connections complete all as specified and as directed. Make: Jaipuria/Rashtriya/BHEL

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 11000 Volts grade, with stranded aluminium conductor, of cross sectional area 120 Sq mm 3 core, suitable for 11 KV earthed system and laying in trenches/walls/ducts/passing through pipe etc.and testing after laying complete all as specified and directed. Make: Havells/KEI/RPG/NICCO

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 11000 Volts grade, with stranded aluminium conductor, of cross sectional area 95 Sq mm 3 core, suitable for 11 KV earthed system and laying in trenches/walls/ducts/passing through pipe etc.and testing after laying complete all as specified and directed. Make: Havells/KEI/RPG/NICCO

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 Volts grade, with stranded aluminium conductor, of cross sectional area 400 Sq mm 3 1/2 core, suitable for 1100 volts earthed system and laying in trenches/walls/ducts/passing through pipe etc.and testing after laying complete all as specified and directed. Make: Havells/Gloster/Paragon/KEI/NICCO

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 Volts grade, with stranded aluminium conductor, of cross sectional area 240 Sq mm 3 1/2 core, suitable for 1100 Volts earthed system and laying in trenches/walls/ducts/passing through pipe etc.and testing after laying complete all as specified and directed. Make: Havells/Gloster/Paragon/KEI/NICCO

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 Volts grade, with stranded aluminium conductor, of cross sectional area 185 Sq mm 3 1/2 core, suitable for 1100 Volts earthed system and laying in trenches/walls/ducts/passing through pipe etc.and testing after laying complete all as specified and directed. Make: Havells/Gloster/Paragon/KEI/NICCO

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 Volts grade, with stranded aluminium conductor, of cross sectional area 150 Sq mm 3 1/2 core, suitable for 1100 Volts earthed system and laying in trenches/walls/ducts/passing through pipe etc.and testing after laying complete all as specified and directed. Make: Havells/Gloster/Paragon/KEI/NICCO

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 Volts grade, with stranded aluminium conductor, of cross sectional area 35 Sq mm 3 1/2 core, suitable for 1100 Volts earthed system and laying in trenches/walls/ducts/passing through pipe etc.and testing after laying complete all as specified and directed. Make: Havells/Gloster/Paragon/KEI/NICCO

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 Volts grade, with stranded aluminium conductor, of cross sectional area 16 Sq mm 4 core, suitable for 1100 Volts earthed system and laying in trenches/walls/ducts/passing through pipe etc.and testing after laying complete all as specified and directed. Make: Havells/Gloster/Paragon/KEI/NICCO

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 Volts grade, with stranded aluminium conductor, of cross sectional area 10 Sq mm 2 core, suitable for 1100 Volts earthed system and laying in trenches/walls/ducts/passing through pipe etc.and testing after laying complete all as specified and directed. Make: Havells/Gloster/Paragon/KEI/NICCO

Supply and erection of steel tubular pole, type 410, SP-31, 11 metre long/height, with cast iron base plate, finial taper plug, bolts, socket, nuts and screws etc. including painting the pole with two coats of aluminium paint over a coat of red oxide and making 30 cm wide black and white strips on pole alternatively using synthetic enamel paint upto a height of 1.50 metre of pole from the top of coping/pedastal of pole starting with black strip at bottom complete all as specified and directed. Make: National Tubing/C & S Electric/ Vikram Industries

Supply and erection of steel tubular pole, type 410, SP-22, 8.50 metre long/height, with cast iron base plate, finial taper plug, bolts, socket, nuts and screws etc. ioncluding painting the pole with two coats of aluminium paint over a coat of red oxide and making 30 cm wide black and white strips on pole alternatively using synthetic enamel paint upto a height of 1.50 metre of pole from the top of coping/pedastal of pole starting with black strip at bottom complete all as specified and directed. Make: National Tubing/C & S Electric/ Vikram Industries including foundation and coping for street lights including necessary bracket with clamps, nuts and bolts, syntex junction boxes and connected wiring of 2.5 sq mm from street lights to junction boxes complete all as specified and directed.

Dismantling old unserviceable PCC poles and and taking down/out of existing old unservicable clamps, insulators, cross arms etc. of any size, any type from trench, etc complete including necessary excavation and earthwork complete all as specified and directed.

Material and labour for new earthing complete with galvanised earth plate electrode 600 x 600x 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 15mm dia (medium grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated and testing on completion including taking down/out of unserviceable earthing of any description complete all as specified and directed. Note: The rate quoted shall include the cost of 7.5 metre GI earth wire and 15mm dia GI pipe for protection of earth lead.

Material and labour for new earthing complete with galvanised steel earth plate 600 x 600 x 6mm buried directly in ground (earth pit not less than 2.25 metres deep below the ground level) with top edge of the earth plate at not less than 1.5 metres below ground level, connected to and including GI earth strip of size 25x4 mm by means of nuts, check-nuts,bolts and washers etc made of galvanized iron or steel and earth strip protected by galvanized steel pipe 40mm dia (medium grade) and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated and testing on completion including taking down/out of unserviceable earthing of any description complete all as specified and directed. Note: The rate quoted shall include the cost of 7.5 metre GI earth strip and 40mm dia GI pipe for protection of earth strip.

Supply and fix cable end termination jointing kit for HT, 11 KV (Earthed) grade cable, outdoor termination type, heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 to 120 sqmm complete all as specified and directed. Make: Rachem/M Seal/ Birla 3M

Dismantling and taking down of old cross arms clamps, bracings, etc of any MS sections etc., from pole including nuts, bolts, washers complete all as specified and as directed. Note: Cost of cutting of bots(Slag bolts), if required at site, is deemed to be included in the unit rate quoted. No extra shall be payable on this account.

Material and labour for cross arms, bracings, supports, clamps and back plates fabricated from MS structural steel sections including nuts, bolts, washers, welding, bending, cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and two coats of aluminium paint over a coat of red oxide primer including taking down of existing old unservicable cross arms, bracings etc complete all as specified and directed.

Dismantling stay assembly of any size and type complete all as specified and directed.

Material and labour for stay assembly complete with all accessories such as stay plate of size 300mm x 300mm x 6mm, stay rod of 20mm dia and 215cm long threaded end with nut including 14mm dia GI stay bow, turn buckle etc. complete all as shown in electrical plate No. 1 complete all as specified and directed. Note: Excavation, Earthwork, concrete, loop type insulator and stay clamps shall be measured and paid separately.

Material and labour for loop type insulator, vitreous porcelain, white, brown or green, with overall dimensions 65 x 90mm, clearance of hole 16mm complete all as specified and directed.

Supply and fixing light grade, GI tubing, of size 100mm dia, with all fittings and fixtures for cable protection and fixed with clamp to pole and wall with nuts and bolts or laid in trenches/road crossing etc. including taking down/out of old unserviceable GI pipe of any description, dia and type complete all as specified and directed. Make: Tata/Jindal/Prakash

Supply and fixing light grade, GI tubing, of size 80mm dia, with all fittings and fixtures for cable protection and fixed with clamp to pole and wall with nuts and bolts or laid in trenches/road crossing etc. including taking down/out of old unserviceable GI pipe of any description, dia and type complete all as specified and directed. Make: Tata/Jindal/Prakash

Supply and fixing light grade, GI tubing, of size 50mm dia, with all fittings and fixtures for cable protection and fixed with clamp to pole and wall with nuts and bolts or laid in trenches/road crossing etc. including taking down/out of old unserviceable GI pipe of any description, dia and type complete all as specified and directed. Make: Tata/Jindal/Prakash

Supply and fixing of danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts of approved size for HT 11000 volts, of size 25x20cm complete all as specified and directed.

Material and labour for anti-climbing device; spikes type, fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and directed.

Dismantling, disconnecting and taking down of old unserviceable insulators of any type and size from poles/stays etc. and removal from site complete all as specified and directed.

Material and labour for boring holes under road, pavement or hardstanding by trenchless technology using ultra sound technique and necessary machine with and including HDPE pipe of 80mm dia suitable for 0.4 mpa working pressure for laying cables etc. complete all as specified and directed.

Material and labour cable route indicator indicating "MES HT U/G 11 KV" and route of cable embossed or engraved with arrow made of RCC in suitable shape as per requirement including necessary excavation and earthwork and grouted in ground in PCC block of (1:3:6), type C2, using 40mm graded stone aggregates, of size 60cmx30cm and route indicator shall be 30cm below ground level and 30cm above ground level indicating clearly type of cable laid including painting the complete RCC indicator with red synthetic enamel paint and marking the engraved/embossed letters/arrow/portion in white paint complete all as specified and directed.

Supply and fixing of LED street light luminaries (90 watts) consisting of 18 x 5W HPLED/LS 18 LED mounted on MCPCB high pressure die cast aluminium housing with sealed toughened glass cover, top opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficiency >90 lm/watt and system efficiency 90 lm/watt, 240 volts, ac, 50 Hz, CRI>70% operating voltage range 160 V-300 V, Power factor> 0.95, working temperature range-20 C to 60 C built in surge protection of more than 10 kV with facility of power supply shall be removed without removing light fitting from pole including make proper connection complete including cutting, welding, drilling holes, nuts, bolts, washers etc. complete including dismantling and taking down/out of unserviceable street lights from existing street light poles complete all as specified and directed. Make: Havells/C&S/Wipro/Surya/HPL/Philips

Material and labour for street light bracket made out of GI pipe, light grade, 40mm bore, length not less than 1.20 metre bent to shape required including cutting, bending in to shape, drilling holes, nuts, bolts, washers etc complete all as specified and directed.

Supply and fixing of PVC insulated, single core, unsheathed, multi stranded cable of copper conductor wire, 1100 volts grade, of size 2.5 sqmm, 2 runs for connecting street light and MCB, laid through GI pipe fixed in position complete all as specified and directed.

Supply and fixing of fibre/plastic/PVC made KIOSK box complete with 3 Phase and neutral connectors, suitable to house 3 Nos. cables with end termination jiont and MCB including MCB SP 6 Amps, on steel tubular pole with the help of MS clamps 20 x 4 mm including nuts, bolts and washers etc. and applying two coats of aluminium paint over a coat of red oxide primer on MS work complete all as specified and directed. Make: Sintex/Havells/Hensel

Supply and fixing of LT feeder pillar panel of size 1.5 metre x 1.5 metre x 60 cm with out door type, cubicle panel board outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet and MS angle section 50 x 50 x 6mm mounted on PCC type B-1 platform 60 cm above and 45 cm below ground level, frame factory fabricated with front and rear openeble double door system and cable alloy (each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/openable by keys having chromium plated 19mm dia fancy lock, U type gasket shall be used to make the outer shell completely verminproof suitable for 3 phase, 4 wire, 415 volts, 50 HZ, tested at factory CPRI for 35 MVA rupturing capacity at 415 volts, factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS-8623-1993 comprising of the following:-

NOTE: (i) The quoted rate shall include minor items such as lugs, nuts and bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc. (ii) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor HRZR cable conforming to IS-694. (iii) Panel drawing shall be got approved before placing order from GE. (iv) The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip duly insulated. (v) Test certificate of panel board will be submitted by contractor. (vi) Louvers shall have to be covered with stainless steel jalli inside the panels. Make of Panel: D V Electromatic (P) Ltd/Shalab Switch gear ltd/ Universal Switch Gear control/Adhunik switch gear/ power system & control Jalandhar

Supply and fixing of LT feeder pillar panel of size 1.2 metre x 1.2 metre x 50 cm with out door type, cubicle panel board outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet and MS angle section 50 x 50 x 6mm mounted on PCC type B-1 platform 60 cm above and 45 cm below ground level, frame factory fabricated with front and rear openeble double door system and cable alloy (each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/openable by keys having chromium plated 19mm dia fancy lock, U type gasket shall be used to make the outer shell completely verminproof suitable for 3 phase, 4 wire, 415 volts, 50 HZ, tested at factory CPRI for 35 MVA rupturing capacity at 415 volts, factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS-8623-1993 comprising of the following:-

NOTE: (i) The quoted rate shall include minor items such as lugs, nuts and bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc. (ii) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor HRZR cable conforming to IS-694 (iii) Panel drawing shall be got approved before placing order from GE. (iv) The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip duly insulated. (v) Test certificate of panel board will be submitted by contractor. (vi) Louvers shall have to be covered with stainless steel jalli inside the panels. Make of Panel: D V Electromatic (P) Ltd/Shalab Switch gear ltd/ Universal Switch Gear control/Adhunik switch gear/ power system & control Jalandhar

Supply and fixing of LT feeder pillar panel of size 0.90 metre x 0.90 metre x 60 cm with out door type, cubicle panel board outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet and MS angle section 50 x 50 x 6mm mounted on PCC type B-1 platform 60 cm above and 45 cm below ground level, frame factory fabricated with front and rear openeble double door system and cable alloy (each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/openable by keys having chromium plated 19mm dia fancy lock, U type gasket shall be used to make the outer shell completely verminproof suitable for 3 phase, 4 wire, 415 volts, 50 HZ, tested at factory CPRI for 35 MVA rupturing capacity at 415 volts, factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS-8623-1993 comprising of the following:-

Dismantaling of old unserviceable ACSR conductor of any size and description from 11 metre long pole complete all as specified and directed.

Note:- Amount of credit of Rs. 36,916.00 for retrieved materials is mentioned in Schedule of Credit on Page No. 60 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Raman Electric Trading Co

R D Bansal