2 nos Flood Lighting Arrangement with High Mast at Deshapriya Nagar Play ground (2) at Nilgaunj Road under ward no -25 within Kamarhati Municipality.

Supply of 12.0 / 12.50 meter High mast lighting system with its Item 1,02,809.00 accessories. Mast shaft shall be in two sections with steel material confirming to BSEN 10025 and material shall be high tensile steel, grade S355, hot dip galvanised confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, 2 continues steel wire rope 6 mm dia (7/19 construction), trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for up to 9 luminaires symmetrically & its control gear( Make of Gear Box : New Allen Berry works /Chandra Gear / Elecon Engineering / Shanti Engineering) boxes and lightning finial. The mast shall have an integral power tool installed inside the base compartment for its operation along with Supply & Fixing of Cu Cable of Power Tool motor, Wiring for Luminaries, Anchor Plate, Foundation Bolt, Nut, Washer, and common Template all complete. Luminaire wiring materials not included in this item. (Make: Bajaj / Transrail / Valmond/Utkarsh /Skipper) (UD&MA ScheduleElectrical-Mechanical Works (Volume-1)- High Mast for Illumination Systems- page no 53, Item No -03)

Erection of high Mast (12.0 / 12.50 M) on RCC foundation with cement concrete considering actual SBC of soil, with the help of suitable modern engg. tools and Plants, wiring of luminaries with all wiring materials like PVC insulated flexible cable of suitable copper conductor core of 1.5 mm² lugs, up to 10 nos. 6A MCB along with construction of shallow foundation with cement concrete for high Mast considering the safe soil bearing capacity as per site condition, as per drawing and design of manufacturer of the mast. The soil test and submission of its report is within the scope of the work. (UD&MA ScheduleElectrical-Mechanical Works (Volume-1)- High Mast for Illumination Systems- page no 54, Item No -04)

Erection, testing & commissioning of up to 12.0 / 12.5 / 16.0 meter high mast on the existing civil foundation by bolts with suitable tools, tackles, machines etc, all complete, as per direction of the EIC. (UD&MA ScheduleElectrical-Mechanical Works (Volume-1)- High Mast for Illumination Systems- page no 54, Item No -05)

Supplying & Erection of medium size feeder pillar box of Size Each 9241.00 (1200 x 750 x 450 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C (UD&MA ScheduleElectrical-Mechanical Works (Volume-1)- A-Series-page no 07, Item No -39)

Supplying and fixing 63A 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating (make-L&T,Legrand,Havells). (PWD Schedule of rates 2017, Page No -D3, Item No - 4(a))

Supply, delivery & installation at site of ML3, 40A power contactor of Aux contact (2NO+2NC) [make- L&T, Cat no-SS90721].

Supply, delivery & installation at site of 240VAC base/DIN mounting time switches [make- L&T, Cat no-J648B1] .

Supply & Delivery of 1100 volt Grade PVC/XLPE insulated aluminium conductor cables of following sizes as per direction of the EIC [make-Havells,Gloster, KEI] a) 4Cx16Sq mm armoured.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. (PWD Schedule of rates 2017, Page No -F2, Item No - 1(a))

Supplying and fixing compression type gland complete with brass gland, brassring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: 4 core 16 Sq.mm. (PWD Schedule of rates 2017, Page No -F4, Item No - 7(c))

Supplying cable socket(lug) and making core termination including soldering/ crimping etc. suitable for the following PVC insulated AL/CU conductor as required including making connection (cable socket made of aluminium) i)4Cx16Sq mm cable.

Supply and wiring in 2x2.5Sq mm Cu conductor single core PVC insulated 250V grade wire from cable termination block to luminaires with earthing attachment in 14 SWG GI wire including making necessary connection complete as per direction of the EIC.

Supply, installation, testing & commissioning of 250 WATT LED Flood light luminaires with high power LED chip, silicon filled BIS regisstered potted driver -(Make : PHILIPS,/Crompton Model - CFS - 506 - 250 - 57 - 30D - SL - GL - NSG , or Similar to Equivalent)

Hoisting, fixing and commissioning of High Mast luminaries incl making necessary connections & earthing attachement. a)LED luminaries (UD&MA ScheduleElectrical-Mechanical Works (Volume-1)- MAINTENANCE AND MANAGEMENT OF INDOOR/OUTDOOR ELECTRICAL INSTALLATIONS- page no 35, Item No -07)

Earthing with 50mm dia GI Pipe 3.64mm thick x3.04mtr.long and 1x4 SWG GI (Hot Dip) wire (4mtr.long) 13mmx80mm long GI bolts, doub- le nuts, double washers including S & F 15- mm dia GI pipe protection (1mtr.long) to be filled with bitumen partly under ground level and partly above the ground level driven to an ave. depth of 3.65mtr.below the ground level and restoring surface duly rammed as below. i)By ISI-Medium GI pipe (PWD Schedule of rates 2017, Page No -G1, Item No - 2(a))

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. (PWD Schedule of rates 2017, Page No -G3, Item No - 5(d))

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. i) 50 mm dia (PWD Schedule of rates 2017, Page No -F6, Item No - 11(d))

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection i) 6-32 A (PWD Schedule of rates 2017, Page No -D6, Item No - 7)

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm withlocking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. (PWD Schedule of rates 2017, Page No -G2, Item No - 3(a))

Add GST @ 18%

Add LWC @ 1%

Please Enable Macros to View BoQ information