PROVN OF SLANT ANTI SEEPAGE SHED FOR BLDG NO. 2/5/2 (DIV HQ) AND SEWAGE LINE FROM P-49/2 TOWARDS RP GATE OF HQ 202 MTN BDE AT BINNAGURI MILITARY STATION UNDER GE (NORTH) BINNAGURI

Amount

M&L for RCC M-25 grade design mix (20 mm graded stone aggregate) as in columns, Pillars, Piers, Posts and struts etc, complete all as specified and as directed.

Formwork to sides of RCC/PCC bands in walls and similar work all exceeding 20cm wide for rough finished surfaces of concrete complete all as specified and as directed.

M&L for mild steel reinforcement of TMT bars 10mm dia and over cut to length bend to shape required including cranking, bending etc and winding with MS wire not less than 0.9mm dia complete all as specified and as directed.

All as per item No. 03 here in before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed.

Demolition of brick work built in cement mortar and removing from site complete all as specified and as directed.

M&L for brickwork with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) louvres and jallies, 40mm thick (measured solid) including all mouldings set in cement mortar 1:4 complete all as specified and as directed.

M&L for Rolled mild steel framed work as in tubular trusses such as roof trusses, trussed, purlines, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etcs including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 complete all as specified and as directed.

M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F 200 mm dia PVC SWR pipes single socketed, in any length with rubber ring joints fixed to walls or laid on floors complete all as specified and as directed.

S&F 200 mm dia PVC bends/shoe of any radius with access door complete all as specified and as directed.

M&L for plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

S&F Mild steel screw bolts 16mm dia 250mm long bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed.

M&L for stainless steel (SS) framed work such as grills, gratings etc with ends of bars shouldered and / or riveted into spikes, framed similar work of Ornamental stainless steel of grade 304 as approved design / drawing etc by Engineer-in-charge complete all as specified and as directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick plaster in two coats (10mm in CM 1:6 + 5mm in CM 1 :4) on fair faces of brick work or concrete surface mixed with water proofing compound in top layer @ 200ml/bag by the weight of cement or as per manufacturer's instructions finishing the surface even and fair without using extra cement complete all as specified and as directed. Note : Water proofing liquid will be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and as directed

M&L for Rendering 15mm thick in CM (1:6) on concrete/brick wall surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in Roof kerbs complete all as specified and as directed

M&L for preparation of new plastered surfaces of wall and applying two coats of colour wash over a coat of white wash complete all as specified and as directed.

M&L for applying two coats of exterior emulsion paint (weather coat) over a coat of exterior primer damp coat on a new plastered surfaces of facia, roof projection, chajja etc including necessary preparation of surfaces complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facing and pointing to in cement mortar 1:3 to ends of sunshades etc. and making good n.exc 10 cm width or girth complete all as specified and as directed

Supply and fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in as in ridges, valley, eaves, etc with self tapping screws as complete all as specified and as directed.

Taking up or down GI 20mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Dismantling water tanks and removing to store of any capacity and any description, complete all as specified and as directed.

S&F 1000 ltrs rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) including connecting up pipes securing access covers etc complete all as specified and as directed.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed.

S&F 20mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete all as specified and as directed.

Excavation in trenches n.exc. 1.5 M wide and n.exc. 1.5 m in depth for foundation etc in soft/loose soil complete all as specified and as directed.

Excavation in trenches exc 1.5m and not exc 3.0 m in depth for foundation etc in soft/loose soil complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering & well ramming in layers not exc. 25 cm excavated of soil complete all as specified and as directed.

Removing excavated material soil beyond 50 m and upto a total distance of 250 m depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for 150 mm bore reinforced concrete pipes, class NP3, laid and jointed complete all as specified and as directed.

M&L for 200 mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars as specified and as directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregated as in bed to 200mm dia bore drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregated as in bed to 150mm dia bore drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in complete all as specified and as directed.

M&L for Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate ) as in foundation filling and mass concrete, complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed

M&L for 15 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work with water proofing compound @200 ml per bag of cement or as per manufacturer's instructions finishing the surface even & fair without using extra cement complete all as specified and as directed. Note: Water Proofing Compound shall be measured and paid separately under relevant item of this Schedule 'A'.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel, benching and drains in manholes complete all as specified and as directed.

M&L for Precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face complete all as specified complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

S&F for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Cutting into existing manholes for connecting new drains, for internal dia of 150mm pipe and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required complete all as specified and as directed.

M&L for chemical earthing complete with copper earth plate of size 90cm x 60cm x 5mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to copper strip 32 x 6 mm thick as earthing leads by means of bolt, nut, check nuts and washers galvanised iron or steel all as shown in electrical plate of SSR Part I connected to earthing test point or as specified or indicated and testing on completion including excavation and earth work, PCC pit with RCC cover having suitable handle, GI Medium grade watering pipe with funnel and wire mesh and suitable dia of GI Light grade Protection pipe complete all as specified and as directed.

S&F copper strip 32 x 6 mm with saddles and fixing screws etc. for earth continuity conductor fixed on PCC block with all necessary fixing arrangement for lighting protection complete all as specified and as directed.

S&F test point terminal block made of gun metal or phosphorous Bronze of size 75 x 75 x 25mm drilled and screwed including 3 Nos 8mm dia 50 mm long hex head screws rectangular opening at top and bottom for entry of down earth strip, fixing screws and bolts for mounting on wall including taking down old unserviceable terminal block complete all as specified and as directed.

S&F for GI Pipe light grade 32 mm dia for the protection of down conductor complete all as specified and as directed.

BINOD TRADING CO. (BID ID -3110251)

M/S RATNESH KUMAR SINGH (BID ID -3106165)

ANUP ENGINEERING WORKS (BID ID -3106200)

M/S MOHAN KUMAR BANSAL (BID ID -3106151)

M/S VIRENDRA KUMAR SINGH (BID ID -3106942)

M/S NIKITA ENGINEERING CO (BID ID -3106115)

R K AGARWAL (BID ID -3106082)