DEVELOPMENT OF ICONIC Greater Gir

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of

1 327.00 unserviceable materials with all lead and lift. Cum. 536.09

(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.

Demolition of Existing Building including RCC Work, Brick work, Stone Masonry, Plaster Work and

Flooring Work including stacking of serviceable materilas and disposal of unserviceable materials with all

(ii) In Cement Mortar.

Clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling and

trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials.

(C) By mechanical means in area of light jungle.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and

5 21851.00 disposing off the excavated stuff upto 50 Meter lead. Cum. 149.67

(B) Dense or Hard soil

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and

6 843.00 disposing off the excavated stuff upto 50 Meter lead. Cum. 263.08

(D) Soft rock not requiring Blasting

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal

of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

(B) Hard rock (requiring blasting)

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful

8 3381.00 materials and disposing off the excavated stuff upto 50 Meter lead. Cum. 162.38

(B) Dense or Hard soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful

9 26.00 materials and disposing off the excavated stuff upto 50 Meter lead. Cum. 285.73

(D) Soft rock not requiring Blasting

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked

Ordinary or hard rock

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful

11 125.00 materials and disposing off the excavated stuff upto 50 Meter lead. Cum. 174.23

(B) Dense or Hard soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers

12 16219.00 not exceeding 20 cm. in depth consolidation each deposited layer by ramming and watering etc complete Cum. 130.39

as directed by EIC.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete.

Earthwork in cuting in all sorts of soil and soft murrum including conveying and spreading the stuff,

embankment as and where directed within 200meters from the end of the cutting with all required lead

15 5924.00 and lift. Cum. 306.39

(C) Above 400 Meters upto 500 Meters.

Conveyance charges of earth lime, murrum, building rubbish, manure, garbage, sludge, excavated rock,

fly ash, aggregate of any kind etc. comp. upto any lead. up to 5.0 km

Above 5.0 km & up to 10.00 km

Providing and laying rubble soling, 230 mm thick, in a compact manner,foudation, road, footpath etc.

using 200 to 230 mm. cut size stones including filling the gaps with 40mm metal and packing with stone

chips with murrum covering and levelling the surface after filling the voids including watering, ramming

well and consolidating each layer, as directed by EIC.

Providing and laying cement concrete 1: 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

19 4849.00 nominal size) and curing etc complete including cost of form work in (A) Foundation and plinth Cum. 3,697.91

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

20 2530.00 formwork but excluding the cost of reinforcement for reinforced concrete work in (A) Foundations, Cum. 4,499.15

footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

21 78.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 6,887.57

(B) Walls upto Ground Floor Slab level

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

22 68.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 6,927.82

(C) Walls upto First Floor Slab level

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

23 889.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 5,519.37

(D) Tie Beam / Ground Beam

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

24 432.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 5,519.37

(E) Ground Floor Beam

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

25 110.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 5,559.62

(F) First Floor Beam

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

26 349.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 6,577.19

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

27 386.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 6,577.19

(H) Ground Floor Slab

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

28 68.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 6,617.44

(I) First Floor Slab

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

29 266.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 7,445.98

(K) Columns, Pillars posts and struts, upto Plinth.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

30 163.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 7,445.98

(L) Columns, Pillars posts and struts, above plinth upto floor two level.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

31 42.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 7,486.23

(M) Columns, Pillars posts and struts, above First Floor Level

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

32 32.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 6,242.49

(N) Sill and Lintel upto floor Two Level.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of

33 38.00 formwork but excluding the cost of reinforcement for reinforced concrete work in Cum. 6,354.78

(O) Staircases excluding landing upto floor two level.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement concrete work,

using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 Kms. having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying in levels and pattern of bays as detail of architect

and finished with screed board vibrator , vacuum dewatering process and finally finished by floating,

brooming with wire brush etc., finishing and reinforcement including cost of admixtures in recommended

34 1426.00 proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without Cum. 5,515.50

impairing strength and durability as per direction of the Engineer in - charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be maintained) The rate shall include cost of side shuttering with

channels, rails, to form panels and groove cutting etc. including filling the joint with glass

strip/polysulphite complete to use. The rate shall also include the cost of reinforcement approximate

calculated at 5.14 kg/Smt. Rate for all lead & lift & as per directed by Engineer in - charge. (Note: -

Cement content considered in this item is @450 kg/cum.)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in

position complete for any height, any floor, any level, any lead and any lift.

Drilling hole of required diameter and depth as directed for fixing of rebars,using hammer drill, cleaning

the hole using mechanical air flower, water etc,providing and fixing rebar in the drilled hole using Fischer

36 178.00 - FIS 360 or Equivalent approved make Cementetious chemical grout and sealant with necessary No. 125.24

scaffolding, staging, labour, tools and equipment etc. complete as directed by Engineer-in-charge.

(a) 8 mm dia bar (100 mm depth )

37 178.00 (b) 10 mm dia bar (100 mm depth) No. 143.42

38 178.00 (c) 12 mm dia bar (125 mm depth) No. 179.78

39 178.00 (d) 16 mm dia bar (175 mm depth) No. 429.25

40 178.00 (e) 20mm dia bar (200 mm depth) No. 642.36

41 178.00 (f) 25 mm dia bar (250 mm depth) No. 1,161.50

Brick work using common burnt clay building bricks having crushing strength not less than 35kg/Sqcm.

In cement mortar 1:6 (1 cement : 6 fine sand) etc. complete as directed by EIC.

(B) Conventional

(i) in foundation & Plinth

(i) Ground Floor

(ii) First Floor

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Half brick masonry in common brunt clay building bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

(B) Conventional

(i) Ground floor

White Stone Bela mesonry block in course in superstructure with stone of approved quality in Lime

Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. complete.

Providing & fixing 23 cm wide chicken mesh jali with nails & then application of 15 mm plaster on

R.C.C.& masonary joints as per dir. of engg. In charge.

Providing 20 mm thick double coat mala cement plaster on Exterior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete.

Providing and laying 20 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of

cement for all floors on brick / concrete wall work using water proofing materials in C M 1: 4 (1 cement :

4 coasrse sand) including finishing with a flooting coat of neat cement slurry etc complete for all floor.

49 981.00 and shall be guaranteed for minimum period of 10 years after handing over the completed building by the Sqm 253.51

main contractor to be finished as directed. Stamp paper guarantee 10 years to be furnished before

receiving any payment from the client.

Providing 15 mm. thick cement plaster in single coat on fair side of brick wall for interior plastering upto

floor two level finished even and smooth in [II] Cement mortar 1:4 (1 cement : 4 fine sand) For all levels,

hights and leads of works. etc. complete as directed by EIC.

Ceiling (Min. 10 mm thickness) at all hts.

Providing and applying 2mm thick Texture Plaster of Earthen Textures, Travertino Texture, Coral texture

or equivalent make incorporating fine filaments made of polymer and aggregating natural stone powder

with making grooves on existing base coat of 20 mm thick smooth mala plaster etc. Complete with two

52 5712.00 coat Exterior weather proof paint and one coat of primer in any shade As per drawings and design Sqm 462.58

supplied by architect and instruction given by authority and E.I.C. for all floor all height.

Providing 8 mm Luxture decorcem expose concerte or brick concerte coating and wall textured paint

using base coat, tapping, durabond expose RCC materials and finishing with decorsil two coat etc.

complete. As per drawings and design supplied by architect and instruction given by authority and E.I.C.

for all floor all height.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated

54 2317.00 wall surface to give an even shade including throughly brushing the surface free from mortar droppings Sqm 78.90

and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required

55 5712.00 shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered Sqm 114.53

materials.etc complete including one coat of primer.as directed by EIC.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Applying two coats of acrylic lapy (putty) & two coats of primer of approved brand and manufacture on

56 2317.00 new wall surface to give an even shade including thoroughly brushing the surface free from mortar Sqm 40.59

dropping and other foreign matter and sand papered smooth.

Applying two coats of acrylic lapy (putty) & two coats of primer of approved brand and manufacture on

new wall surface to give an even shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth with Wall painting (two coats) with plastic

57 3071.00 emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade Sqm 119.49

including throughly brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar

1 : 6 (1 cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty : 1.5-coarse sand) laid over and jointed with

58 2264.00 grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. Sqm 971.95

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid

on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed

with pigment to match the shade of slab including rubbing and polishing etc. complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 (1

cement : 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for antiskit

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate

63 91.00 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm thick. Sqm 322.93

Providing and fixing cladding with Dhrangadhra Stone upto any height with 18 mm thick gang saw cut

stone with (machine cut edges) of uniform colour, fixed with cement motar and sealing the joints with

approved weather sealant as per Architectural drawing and direction of Engineer-in-Charge.

Providing and fixing Rajula stone of avg. 18mm thickness gang saw cut stone with (machine cut edges) of

65 655.00 uniform colour, fixed with cement motar and sealing the joints with approved weather sealant as per Sqm 1,905.87

Architectural drawing and direction of Engineer-in-Charge.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing 18 mm thick granite gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, door / window sills , facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement

66 95.00 : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, Sqm 3,277.66

including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all

Providing & Laying 18 mm thick Mirror polish granite For flooring , counter , stair -riser , tread , skirting

dedo, Jambs etc. machine cut or chiselled on bed of cement mortar 1:1 pointing with neat cement

slurry incl. moulding, Making grooves where it is required etc. comp. as per instruction of engineer

Structural steel work (Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type

sections, in framed work, including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer all complete as per the structural designs and directions of Engineer in charge

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint,

69 1958.00 brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn Sqm 87.81

the surface of all dirt, dust and other foreign matter

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary

70 4647.00 accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the Kg 601.46

floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for

payment purpose only weight of stainless steel members shall be considered excluding fixing accessories

such as nuts, bolts, fasteners etc.).

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and

71 7429.00 nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead Sqm 727.13

complete excluding the cost of purlins, Rafters and Trusses. (1) 0.80 mm thick sheet.

Providing ridges or hips 600 mm overall in plain G.I. sheet class-3 fixed with G.I. J. or L Hooks and nuts

8mm dia G.I. Limpet and bitumen washer complete. (1) 0.80 mm thick sheet.

Providing and fixing 150mm wide 450mm over all semicircular plain G.I.sheet class-3 gutter with Iron

73 433.00 brackets 40mm x 3mm size Bolts, Nuts, washers etc. including making necessary connection with rain Sqm 561.27

water pipes. (i) 0.80 mm thick Sheet.

Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with hilti screw and

74 1262.00 rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete as directed by Engineer in Sqm 1,441.90

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing flush door both sides laminated and I.T.W. beading all around by using I.T.W.

frame 120 mm. x 80mm. shutter fabricated from 35 mm thick solid core malemine faced three layered pre

laminated flat pressed wood based exterior grade bonded BWP / BWR synthetic resin having stamped IS

75 62.00 12823 grade I type II including three coats of lacquer polishing to exposed wooden surfaces and Stainless Sqm 5,535.81

steel decorative type designs fixtures / fastening 2Nos. Handles, 2Nos. Aldropes, towerbolt etc. including

I.T.W. triangular batten patti of size 30 mm. x 30 mm. etc. as per architectural detailed drawing and as

directed by engineer in charge..

Providing and fixing in position collapsible steel shutters with vertival channels 20 mm x 10 mm x 2 mm

braced with flat iron diagonals 20 mm x 5 mm size with top & bottom rails of T iron 40 mm x 40 mm x

mm with 38 mm diameter steel pulleys complete with bolts, nuts, locking arrangements, stopper handles

including applying a priming coat of red lead paint.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked

together through their entire length and jointed together at the ends by end locks mounted on specially

77 138.00 designed pipe shaft with bracket plates, guide channels and arragements for inside and outside locking Smt 4,495.02

with push-pull operation including the cost of hood cover and spring etc. complete. (B) Shutters having

width 3.5 M. and above

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size

63.50 x 38.10 x 1.95 mm @ Wt 1.094 Kg / Rmt, horizontal two track member size 61.85 mm x 31.75 mm

x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

78 60.00 vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm Sqm 1,713.70

thick transparent bronze colour inted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc complete for window.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @ Wt.

79 30.00 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as Sqm 1,175.56

details etc complete for Ventilation

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The core of

the shutter & frame is to be filed up with injected polyurethene foam done in situ alongwith embedded

80 219.00 wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be Sqm 2,019.98

water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S

hinges with fastener sleeve & alluminium fixtures & fastenings.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire

mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12

(D=100 mm with tolerance of ±2%), Zinic+10% Al alloy + PVC coated, Mesh wire diameter 2.7/3.7 mm

(ID/OD), mechanically edged / selvedged with partitions at every 1m interval and shall have minimum

81 2059.00 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2 Cum. 4,931.33

mm (ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of

mm, as per drawing, all complete as per directions of Engineer-in-charge.

Anti-Termite System:Providing and laying of permanent piping technology anti-termite treatment before

flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D.

with inbuilt pressure compensation chip every 30 cm interval in the tube, having working pressure of

Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the

entire periphery of the building and at internal network of building at a depth of 20 to 200 mm under floor

at every 2 to 3 mtr. c/c distance (adjusted as per building layout ) & Ends of loop pass through a PVC

elbow of minimum 32 mm ID at junction box of wall and floor level, entering into a steel reinforced

82 813.00 grooved flexible pipe of minimum 22 mm ID leading into junction box and the loops shall terminate in Smt 134.33

junction boxes & test every junction during injecting chemicals for termite control treatment. The anti

termite chemical Imidacloprid 30.5% SC mix as per IS-6313 (part III) shall be injected by the pressure

pump diluted with water @ 10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor

shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in-

Charge with bond of 5 year warranty.(i)Anti Termite chemical injected area (Chemical injecting incl.

Providing and fixing (Chainlink Fencing) with fabrication of M.S. Angle vertical support of size 75x75x6

mm and horizontal support of 50x50x6 mm on top, centre and bottom with galvanize chain link 50x50 -

10 guage jali fitted with 40x6 mm M.S. flat including welding and erecting the same in position in cc

83 5095.00 block 1:2:4 of size 50x50x60 cms at 3 mtr C/C spacing with necessory excavation including two coats of Sqm 1,845.27

oil Painting over single coat of primer etc complete as directed & including one open able gate 3' ft wide

and 7 ft in ht. including of two coats of oil paint on M.S. Structure as per drawing & directed by Engineer

Stamp Concrete:-

Supply and application charges required forstamping the freshly laid new concrete including finishing &

(Supply of M25 grade concrete, (Pumping if required) within formwork in your (Clients) scope colouring

the top surface accurately to the required level, shape and size using approved colour shade of Hicrete

84 1796.00 Dura Hard (Colour Hardener) Hicrete PRA (Powder Release Agent) and stamping it (Curing is the scope Sqm 883.75

of Client) washing the entire surface area using cleaning agent so as to open the pours of concrete for

better sealer penetration followed by antiquing it on top with approved colour using Hicrete Super Blue

Hicrete Colour Wash and Sealing the entire area of stamped concrete using Hicrete Gloss Sealer-AC

(Concrete Sealer).

85 606.00 Cutting of control joints panels at suitable required locations using tools and tackles. Rmt. 82.82

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providning and fixing the Seating Type - B1 with back support which is made with the use of ferrocement

in grade of M-50 (Minimum OPC Cement Content - 470kg) size and design as per architercure. (Seating

Type - B1 with back support Bench size : L: 3420mm, W:450mm, H: 813 mm, Base Width: 315mm and

Base Height: 483mm)

Providing and fixing the Seating Type - B3 Arch Seating which is made with the use of ferrocement in

grade of M-50 (Minimum OPC Cement Content - 470kg) size and design as per architercure. (Type - B3

87 4.00 Arch Seating Including 3 curved seating + 1 center table of 450mm radius, Bench size : L: 2030mm, Nos. 1,52,762.50

W:450mm, H: 813mm, Base Width: 315mm and Base Height: 483mm, Back Support Height: 330mm.)

Providning and fixing the Seating Type - B3 Arch Seating which is made with the use of ferrocement in

grade of M-50 (Minimum OPC Cement Content - 470kg) size and design as per architercure. (Type - B3

Arch Seating Bench size : L: 2030mm, W:450mm, H: 813mm, Base Width: 315mm and Base Height:

483mm, Back Support Height: 330mm.)

Providning and fixing the Seating Type - B4 which is made with the use of ferrocement in grade of M-50

(Minimum OPC Cement Content - 470kg) size and design as per architercure. (Seating Type - B4

(including 4 Arch Seating and 1 center table of 600mm radius) (Bench size : L: 2562mm, W:450mm, H:

483 mm, Base Width: 315mm and Base Height: 483mm)

Providing and fixing the Type - B5a which is made with the use of ferrocement in grade of M-50

(Minimum OPC Cement Content - 470kg) size and design as per architercure. Seating Type - B5a

(including 2 C-type seating and 1 center table of 450mm radius) (Bench size : L: 3900mm, W:450mm, H:

483 mm, Base Width: 315mm and Base Height: 483mm).

Providning and fixing the Seating Type - B5b which is made with the use of ferrocement in grade of M-50

(Minimum OPC Cement Content - 470kg) size and design as per architercure. (Type - B5b - including 2 L-

type seating and 1 center table of 900 x 1500mm) (Bench size : L: 3900mm, W:450mm, H: 483 mm, Base

Width: 315mm and Base Height: 483mm)

Providning and fixing the Center Table which is made with the use of ferrocement in grade of M-50

92 4.00 (Minimum OPC Cement Content - 470kg) size and design as per architercure. (Center Table of 600 mm Nos. 20,200.00

radius and Height 450mm)

Providning and fixing the C.I. Cover with frame 600mm x 850mm at required place as per instruction of

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of

Anti-corrosive paint etc. complete.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Pebble Sculpture:

Sculpture is fabricated from iron rods life size animal sculpture with 12mm/10mm/8mm as per

requirement expertly bent and shaped to form an intricate design. The rods are welded together to create

a sturdy framework, which is then filled with pebbles or local stones in an artistic pattern, as specified by

95 11.00 the department and architect. The iron rods are protected from corrosion with a durable coating, require Job 6,81,750.00

colour ensuring the sculpture's longevity. The natural stones add texture and visual interest, while the

metal framework provides structural integrity. The sculpture's design seamlessly blends artistry with

technical precision, creating a unique and captivating piece for the garden.

Designing, hand crafting and installation of stones as sculpture composition as per design approved

should be erected 3m height with appropriate width and length. size. stone Sculpture should be carried

96 5.00 out in local stone . The sculpture has to be hand crafted by expert artisans giving all shapes, expressions, Job 12,62,500.00

polishing and color as approved by EIC/Architect. Lifting, Placement & Fixing with all required civil

work, welding DG set, tools, crane and scaffolding etc at the site as per requirement directed by EIC.

Designing, Providing and erection of 8.00 mt height and 5.0 mt. width in ferrocement and mix media

sturcutre making diffent initial mould structure using FE 500 TMT bars and clay mould with hand work

97 1.00 by experienced artists giving all shapes and expression as approved by EIC, Using High grade FRP ISO Job 60,60,000.00

resin, matting, cobalt, catalyst, wax polish and natural look painting with all required welding, equipments

as per design approved by EIC or Atchitect.

Bronze Sculpture

Designing, manufacturing and installation of Lion Sculpture approx. 3 mt length made of Bronze casting

with Patina finish as per approved design by EIC/Architect. The sculpture should be appropriately

98 1.00 strengthened internally by steel frame. The design of the sculpture has to be artistic and unique, external Job 60,60,000.00

finish, color and polishing has to be the best in class. Lifting, Placement & Fixing with all required civil

work, welding DG set, tools, crane and scaffolding etc at the site as per requirement directed by EIC.

Designing, providing, making and erection creative "AAYUDH MANAV "of approx 8' to 10' ft. height

size with internal MS fabricated structure, using high grade FRP ISO resin, matting, cobalt, catalyst, wax

polish and natural look painting. Lifting, Placement & Fixing with all required welding, equipment, DG

set, tools, crane, scaffolding at site as per the requirement Work complete including all type of material,

fittings, fixtures, Finish, loading, unloading, transportation, all lead, accessories, all floor, all levels, all

99 6.00 heights, etc. complete as per drawings, specifications & instruction of Client. The Details of the Theme, Nos. 16,05,900.00

Design, Drawing, Subject of Art, Sculpture, etc. Whatever in the scope of the project has to be proposed

by the Bidders in the form of Drawing, Rendered Image etc. in Soft Copy as Well as Color Printed

Format, Prototype model for the approval of Client And the same shall be executed as per final selection

and decision of the client.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Nandi Sculpture with Fountain (FRP) :

Designing, providing, making and erection of 5 ft × 7 ft size High Grade FRP Nandi, making initial mould

structure using FE 500 TMT bars and clay mould with hand work by experienced artists giving all shapes

and expression as approved by EIC and then final FRP lion with internal MS fabricated structure, using

100 1.00 high grade FRP ISO resin, matting, cobalt, catalyst, wax polish and natural look painting. Lifting, Job 17,67,500.00

Placement & Fixing with all required welding, equipment’s, DG set, tools, crane, scaffolding at site as per

the requirement directed by EIC

Fountain Design :

Designing, Providing and erection of 3.5 mt dia

Stone Sculpture

Designing, hand crafting and installation of Lion sculpture in single piece should be erected as per actual /

Life size. (Asiatic Lion). Marble Sculpture should be carried out in Spanish beige Italian marble or

101 3.00 burberry Beige italian marble or botticino italian marble. The sculpture has to be hand crafted by expert Job 7,80,225.00

artisans giving all shapes, expressions, polishing and color as approved by EIC/Architect. Lifting,

Placement & Fixing with all required civil work, welding DG set, tools, crane and scaffolding etc at the

site as per requirement directed by EIC.

Mural on Charan kanya : The mural is crafted using ferro-cement, 20ft *10 ft. size, a durable and

versatile material, with a thickness of 50mm, depth , The process begins with creating a wire mesh

framework, which is then layered with a mixture of cement, sand, and water. The ferro-cement mixture is

applied in multiple layers, allowing each layer to set before adding the next. The mural's design, depicting

102 5.00 the story of "Chrankanya", is carefully sculpted and molded into the ferro-cement layers. Once the final Nos. 26,81,550.00

layer is set, the mural is finished with a protective coating to enhance its durability and weather resistance.

The resulting mural is a stunning and long-lasting work of art, showcasing the ancient story in a modern

and innovative medium.

Lord Krishna Sculpture (FRP)

Designing, providing, making and erection of "Life Size" High Grade FRP Lord Krishna, making initial

mould structure using FE 500 TMT bars and clay mould with hand work by experienced artists giving all

103 1.00 shapes and expression as approved by EIC and then final FRP Krishna with internal MS fabricated Job 5,05,000.00

structure, using high grade FRP ISO resin, matting, cobalt, catalyst, wax polish and natural look painting.

Lifting, Placement & Fixing with all required welding, equipment’s, DG set, tools, crane, scaffolding at

site as per the requirement directed by EIC

Cow Sculpture (FRP) - "GIR COW"

Designing, providing, making and erection of "Life Size" High Grade FRP Cow, making initial mould

structure using FE 500 TMT bars and clay mould with hand work by experienced artists giving all shapes

104 1.00 and expression as approved by EIC and then final FRP cow with internal MS fabricated structure, using Job 3,15,625.00

high grade FRP ISO resin, matting, cobalt, catalyst, wax polish and natural look painting. Lifting,

Placement & Fixing with all required welding, equipment’s, DG set, tools, crane, scaffolding at site as per

the requirement directed by EIC

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Ferro Cement Gazebo

Making and fixing of ferro Gazebo with mixture of 7.5 mtr. dia , cement, sand, 4mm metal, cocunut scrap,

1" thick Chicken mesh jali (1"x1") including admixture of dr. fixit and reiforcement for proper

105 7.00 stregthening including wall, floor, column & column / pillar cladding, Roof, Railing surface (required Job 25,25,000.00

coats) to give an required shape even shade after thoroughly finishing the surface to remove all dirt etc

complete as per Architect design , detail drawing & as directed by EIC.

Ferro Cement Gazebo with Rustic Design

Making and fixing of Gazebo with mixture of cement, 7.5 mtr. dia sand, 4mm metal, cocunut scrap,1"

thick Chicken mesh jali (1"x1") including admixture of dr. fixit and reiforcement for proper stregthening

106 6.00 including wall,floor,column & column/pillar cladding, Roof, Railing surface (required coats) to give an Job 18,93,750.00

required shape even shade after thoroughly finishing the surface to remove all dirt etc complete as per

Architect design , detail drawing & as directed by EIC.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming

to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 632018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 35cm length, 30cm

height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing

in proper line and level, filling the joint with C:M 1:3 (1-cement : 3-fine sand) etc complete.

Providing and laying Paver Cobel Granite Stones (100 mm x 100 mmx50mm) over 1:3 cement mortar (1

cement : 3 graded medium coarse sand) bedding of average 1” thickness, floated with thick and neat

cement paste with consumption of cement @4.4kg/ sqm and 2 kg /sqm for joints mixed with approved

109 330.00 pigment to match the shade of the stone including dressing, rubbing, curing, cleaning etc. complete at all Sqm 3,080.50

levels and heights. (The rate shall be for the patterns and details provided by the Architect. If required,

residues will be provided and no extra amount will be paid for residues to be used to achieve the pattern).

Providing and fixing of 4 Seater Spring See-Saw Re-07-Ss, Actual Equipment Size: 8 X 2 X 3 Ft.,

Minimum Recommended Area: 12 X 4 X 5 Ft., Children Capacity: 4 Children, including all charges like

labour, transportation etc. Maintain line and level the fixing of equipment as per Instruction of EIC.

Providing and fixing of 2 Seater Swing Rubber Belt Re-02-Sw, Actual Equipment Size: 10 X 5 X 10 Ft.,

Minimum Recommended Area: 12 X 8 X 12 Ft., Children Capacity: 2 Children, including all charges like

labour, transportation etc. Maintain line and level the fixing of equipment as per Instruction of EIC.

Providing and fixing of Roto Tube Slide Re-05-Sl, Actual Equipment Size: 16 X 4 X 8 Ft., Minimum

Recommended Area: 24 X 8 X 12 Ft., Children Capacity: 4 Children, including all charges like labour,

transportation etc. Maintain line and level the fixing of equipment as per Instruction of EIC.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing of 4 Seater Simple Merry-Go-Round Re-10-Mgr., Actual Equipment Size: Dia 4 Ft.,

Minimum Recommended Area: Dia 8 Ft., Children Capacity: 4 Children, including all charges like

labour, transportation etc. Maintain line and level the fixing of equipment as per Instruction of EIC.

Providing and fixing of 2 Seater Spring See-Saw Re-02-Ss, Actual Equipment Size: 8 X 1.5 X 2 Ft.,

Minimum Recommended Area: 12 X 3 X 4 Ft., Children Capacity: 2 Children, including all charges like

labour, transportation etc. Maintain line and level the fixing of equipment as per Instruction of EIC.

Providing and fixing of Wave Slide Re-06-Sl, Actual Equipment Size: 18 X 2 X 12 Ft., Minimum

Recommended Area: 24 X 6 X 15 Ft., Children Capacity: 5 Children, including all charges like labour,

transportation etc. Maintain line and level the fixing of equipment as per Instruction of EIC.

Providing and fixing of Roller Slide Re-01-Sl, Actual Equipment Size: 16 X 2 X 8 Ft., Minimum

Recommended Area: 20 X 6 X 12 Ft., Children Capacity: 4 Children, including all charges like labour,

transportation etc. Maintain line and level the fixing of equipment as per Instruction of EIC.

Providing and fixing of Standard Slide Re-04-Sl, Actual Equipment Size: 16 X 2 X 10 Ft., Minimum

Recommended Area: 20 X 6 X 12 Ft., Children Capacity: 4 Children, including all charges like labour,

transportation etc. Maintain line and level the fixing of equipment as per Instruction of EIC.

Providing and fixing of FUNKY FRENZY, Actual Equipment Size: 24 X 18 X 14 Ft., Minimum

118 2.00 Recommended Area: 30 X 32 X 16 Ft., including all charges like labour, transportation etc. Maintain line Nos. 3,80,739.70

and level the fixing of equipment as per Instruction of EIC.

Supplying and Installation of Invisible Grill (horizontal + vertical) which has 1.5 inch gap between

119 232.00 horizontal and vartical and thickness of SS wire is 2mm with Locking system 3000 pc per 1720 sqm. Rate Sqm 1,252.40

is inlcuding all charges like labour, material and installation.

Supply and installation of Roofing Shingals with proper water proofing treatment of surface including all

rates like material, labour etc. First Apply bitumen base Primer over the smooth surface and allowing the

same to dry for 6-8 hrs. after that for water proofing treatment Aupply of 3MM thick APP modified

membrane with the help of torch-on method and sealing of joints all complete followed by apply of 3MM

thick APP modified membrane torching method which is Followed by supply of High Definition,

120 1022.00 Laminated Asphalt based roofing shingles called "Country Series of Technonicol Shingles Brand" (having Sqm 1,687.19

50 yrs warranty and wt of 12.50 kg per sqm) also Followed by supply of high-end and SBS polymer

modified Ridge with the help of nailing/torching method in last step Followed by apply of Roofing

Shingles, Ridge, Primer with nailing/torching method.

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

letter develop on High Grade FRP, 70ft *7 ft. L*H as pr design with 5mm thickness, MS square pipe

structure inside the edge of letters, height 1mt , with) in highgrade FRP with scientific accuracy. OR

Sculpture is fabricated from iron rods 12mm/10mm/8mm as per requirement expertly bent and shaped to

form an intricate design. The rods are welded together to create a sturdy framework, which is then filled

122 1.00 with pebbles or local stones in an artistic pattern, as specified by the department and architect. The iron Job 33,40,575.00

rods are protected from corrosion with a durable coating, require colour ensuring the sculpture's longevity.

The natural stones add texture and visual interest, while the metal framework provides structural integrity.

The sculpture's design seamlessly blends artistry with technical precision, creating a unique and

captivating piece for the garden.

Parking Sign:- Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size size 60 x 60cms. square plus 60 x 20cms rectangular additional plate

as as per the design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr

long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The

123 13.00 details of symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall Each 7,575.00

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for

the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

Ferro Cement Gate :-

Designing, Providing and erection of 18mt x 10 mt. x 2.5mt appropriate depth "Artistic gate" with ferro

cement sturcutre 100mm thickness of rock stone structure (hand made artistic) along with tree design as

per the scalled model with a cement mortar of 1 : 4 (1 cement : 4 sand), 6 / 8 / 10 /16 / 25 mm FE500

124 3.00 TMT bar, chicken / mosquito wire mesh jali of 14*14 mesh, GI wire, FRP leaf structure, painting with Job 56,81,250.00

required colur and pigments and all necessary tools, equipments and scaffolding up to 30ft etc as directed

Artistic work as per the design inclusive of ferro structure, steel work, rock stones structure, painting etc.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing of Sinages with Aluminium Composite sign panels of size and shape as per design

intent drawings to be fabricated from CNC cut and folded 4mm thk aluminium Composite pannels , fixed

onto post using 3M VHB tape and MS circular Powdercoated hollow section (as per intent drawings

provided) or concealed MS fixtures along with visible MS brackets fixed at the given positions (as per

design intent drawings) 4 Plates of 900 x 300 mm each Sign content to be printed on ASTM Type XI

Class c per the sign type layout having outdoor life of 10 Years for traffic colours (Except yellow , brown

and orange) as specified By OEM or 5 Years for Multicour Prints. Type XI Prismatic retro reflective

patternless Sheeting : Special fungus resistance reboundable Type I prismatic patternless retro-reflective

sheeting confirming to S2 clauses of ASTM D4956 for flexibility and impact resistance of reboudable

sheeting and UV overlay film. Sheeting has to be tested for following properties and certificate of it

125 17.00 having passed these tests shall be obtained from International/Government Laboratory Institute, by the Nos. 3,53,500.00

manufacturer of the Sheeting. The test report is to be uploaded at the time of participating in the tender.

1) The contractor shall submit A4 size sample of the Type XI reboundable sheeting with digital printing

as per IRC 67-2022 MCS Warranty conditions.

2) The test reports of all materials along with batch numbers and certificate of authentication to be

submitted before execution/ start of work.

3) The Retroreflective sheet will we printed by Special Inks used for printing letters/ legends/ directions/

theme shall be certified for low volatile organic compound emission & shall be water based ink (non

solvent & non eco solvent ink) a certificate from the sheeting manufacturer to be taken via the bidder for

the in-house approved printer to be submitted along with tender bid

All visible metal elements to be clamped using round headed fasteners or suitable alternatives to mimic

appearance and have smooth grinded finish with powder coating of approved shade as per design intent.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing of Sinages with MAP Sign Aluminium Composite sign panels of size and shape as

per design intent drawings to be fabricated from CNC cut and folded 4mm thk aluminium Composite

pannels , fixed onto post using VHB tape and MS circular Powdercoated hollow section (as per intent

drawings provided) or concealed MS fixtures along with visible MS brackets fixed at the given positions

(as per design intent drawings) 4 x 3 FT MAP SIGN Sign content to be printed on ASTM Type 1 Class c

per the sign type layout having outdoor life of 5 Years for traffic colours (Except yellow , brown and

orange) as specified By OEM or 5 Years for Multicour Prints. Type I Prismatic retro reflective patternless

Sheeting : Special fungus resistance reboundable Type I prismatic patternless retro-reflective sheeting

confirming to S2 clauses of ASTM D4956 for flexibility and impact resistance of reboudable sheeting and

UV overlay film. Sheeting has to be tested for following properties and certificate of it having passed

126 28.00 these tests shall be obtained from International / Government Laboratory Institute, by the manufacturer of Nos. 20,200.00

the Sheeting. The test report is to be uploaded at the time of participating in the tender.

1) The contractor shall submit A4 size sample of the Type XI reboundable sheeting with digital printing

as per IRC 67-2022 MCS Warranty conditions.

2) The test reports of all materials along with batch numbers and certificate of authentication to be

submitted before execution/ start of work.

3) The Retroreflective sheet will we printed by Special Inks used for printing letters/ legends/ directions/

theme shall be certified for low volatile organic compound emission & shall be water based ink (non

solvent & non eco solvent ink) a certificate from the sheeting manufacturer to be taken via the bidder for

the in-house approved printer to be submitted along with tender bid

All visible metal elements to be clamped using round headed fasteners or suitable alternatives to mimic

appearance and have smooth grinded finish with powder coating of approved shade as per design intent.

FRP / GRP Moulded Pylon Signs: Specifications & Features :- FRP (Fiberglass Reinforced Plastic) or

GRP (Glass Reinforced Plastic) moulded pylon signs are durable, lightweight, and weather-resistant

structures used for outdoor branding and signage.

Specifications:

1)⁠ ⁠Material Composition :- High-strength fiberglass with polyester or epoxy resin UV-resistant gel coat for

127 17.00 weather protection Corrosion-resistant and non-conductive. Nos. 4,20,412.50

2)⁠ ⁠Structural Properties :- Lightweight yet robust Impact-resistant and durable Can withstand extreme

weather conditions

3)⁠ ⁠Design & Finish :- Smooth or textured finish Can be painted, laminated, or digitally printed Available

in single-sided Can be embedded or bolted onto concrete foundations SIZE : 10 x 3 ft, 4 to 8 inch

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Signage is made of 3D channel letter, made from Following, AMBARDI SAFARI PARK

A) Front :- Front is to be made of 3.5 mm Acrylic and 3M / Avery / LG Cast vinyl of desired shade as per

approval. Dual color vinyl film in desired day shade to be of cast acrylic base without printing the face of

B) Side :- Signage made of CNC channel bending machine made of exturded alloy 6063 thickness of

1.00mm confirming to BS 1474-1987. 80 to 125 mm as side of 3D letter exturded alloy profile with front

edge and border with provisioning of housing front Acrylic inside. Back of the extrusion must be provided

with built in weather proof layer to prevent dust, moisture etc. Alloy to be anodize to 18 to 20 microns in

champagne / brown / silver colour of approval shades.

128 131.00 C) Illumination :- Signage is to be illuminated with LED module of Arihant (with required Arihant Sqm 26,490.28

power supplies) with 3 years warranty .

D) Back :- Back is to be made of 4mm thick ACP with 0.5 mm thickness Aluminum Foil on both sides.

E) Timer :- Auto operated using L&T / Havells / schneider timer of required capacity.

Optional Back ACP With Frame :- ACP Cladding 4 mm thick ACP, 0.5 mm aluminium foil with MS

SHS 50 x 50 x 2 mm frame. MS frame to be duly treated with 2 coats red oxide primer and 2 coats of

white enamel paint.

Minimum Height of a letter is not less then 450mm.

Providing & Fixing Overhead Informatory Cantilever type sign boards made out of 4mm Aluminum

Composite Material sheet size 3.6 mt x 2.1 mt as per detailed drawing with pretreated with photopreting

process & acid etching coated with one coat of epoxy primer and two coats of best quality epoxy paint

rectified with retro reflective sheeting ASTM D-4956 Type-XI as per latest IRC and M.O.S.T.

129 28.00 Specification, Total Post of 7.6mtr high of size 250NB (273mm OD 6mm Thick) and structure frame Nos. 2,23,841.25

made from 80NB and 25NB as per the drawing. The Sign facia frame fabricated from suitable size iron

angle of size 40 x 40 x 5mm as per drawing painted with best quality epoxy coating, the details of symbol,

Letters and Numerals for each board shall be as per the instruction of Engineer – in – charge. A warranty

of 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall be submitted by

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing of Sinages with MAP Sign Aluminium Composite sign panels of size and shape as

per design intent drawings to be fabricated from CNC cut and folded 4mm thk aluminium Composite

pannels , fixed onto post using VHB tape and MS circular Powdercoated hollow section (as per intent

drawings provided) or concealed MS fixtures along with visible MS brackets fixed at the given positions

(as per design intent drawings) 4 x 3 FT MAP SIGN Sign content to be printed on ASTM Type 1 Class c

per the sign type layout having outdoor life of 5 Years for traffic colours (Except yellow, brown and

orange) as specified By OEM or 5 Years for Multicour Prints. Type I Prismatic retro reflective patternless

Sheeting : Special fungus resistance reboundable Type I prismatic patternless retro-reflective sheeting

confirming to S2 clauses of ASTM D4956 for flexibility and impact resistance of reboudable sheeting and

UV overlay film. Sheeting has to be tested for following properties and certificate of it having passed

130 30.00 these tests shall be obtained from International / Government Laboratory Institute, by the manufacturer of Sqm 7,335.63

the Sheeting. The test report is to be uploaded at the time of participating in the tender.

1) The contractor shall submit A4 size sample of the Type XI reboundable sheeting with digital printing

as per IRC 67-2022 MCS Warranty conditions.

2) The test reports of all materials along with batch numbers and certificate of authentication to be

submitted before execution/ start of work.

3) The Retroreflective sheet will we printed by Special Inks used for printing letters / legends / directions /

theme shall be certified for low volatile organic compound emission & shall be water based ink (non

solvent & non eco solvent ink) a certificate from the sheeting manufacturer to be taken via the bidder for

the in-house approved printer to be submitted along with tender bid All visible metal elements to be

clamped using round headed fasteners or suitable alternatives to mimic appearance and have smooth

Grassing with selection No.1 grass In rows 5 cm apart in both directions including watering and

maintenance of the lawn for 3 months or more till the grass forms a thick lawn, free from weeds and fit for

131 4803.00 mowing including supplying farm clay up 300 mm thick, sludge, manure, pesticides, extra earth, disposal Sqmt. 292.74

of rubbish, trench excavation and all labour with lead and lift etc. complete as directed by EIC.

Providing & Planting of Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling

with goodearth with mixing of cow dong and pesticide.planting the following plant of 4' to 6' height stack

132 36.00 it well, maintain it for 3 month name of plants as below etc completed as dircted by E.I.C/PMC. Nos. 252.50

Champa Tree (6')

133 35.00 Garmalo Tree (6') Nos. 277.75

134 35.00 Bottel Plam (6') Nos. 606.00

Providing & Planting of Deep rooted exoitic palm trees Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling

with good earth with mixing of cow dong and pesticide.planting the following plant of 8' to 10' height

stack it well, maintain it for 3 month as below etc completed as dircted by E.I.C/PMC.

Ashoka Tree (8')

136 14.00 Gulmohar Tree (8') Nos. 303.00

137 14.00 Kadam Tree (8') Nos. 303.00

138 14.00 Neem Tree (8') Nos. 272.70

139 15.00 Saptapani Tree (8') Nos. 277.75

140 15.00 Golden Bamboo Plam (8') Nos. 151.50

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing & Planting of Ornamental shurbs Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with good earth

with mixing of cow dong and pesticide.planting the following plant of 4' to 6' height stack it well,

maintain it for 3 month as below etc completed as dircted by E.I.C/PMC.

Rafic Plant (4')

142 29.00 Red Ixora Plant (4') Nos. 126.25

143 29.00 White Ixora (4') Nos. 126.25

144 29.00 Karan Plant (4') Nos. 60.60

145 29.00 Canna Plant (4') Nos. 12.12

146 29.00 Panama Rose Plant (4') Nos. 75.75

147 29.00 Lily Plant (4') Nos. 12.12

148 27.00 Song of India Plant (4') Nos. 151.50

149 984.00 Providing and supplying fine river silt(Kamp) as directed by EIC Cmt 555.50

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected

concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories

150 241.00 and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame no 419.15

covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Wiring for the light points as above but with IP66 Switch board with IP 66 Box and 6 Amp / 16 amp

151 18.00 Switch. 250 Volt one 6A IP66 switch located on IP 66 box board of Legrand cat. No. 673000 & 684638 no 3,261.29

Primary light point controlled by one SP MCB (Same as above item but controlling with SP MCB)

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be

erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection

153 370.00 with primary light with accessories erected on Metal / PVC box covered with 3 mm thick no 122.21

PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green)

both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/ceiling ,complete with 6A Modular type switches and

following type of accessories erected on PVC / Metallic box, single mounting base frame covered with

154 9.00 textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary no 530.25

batten/angle holder or ceiling rose or H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and accessories with earth continuity of

155 37.00 following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic no 598.93

front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box,

156 51.00 single mounting base frame covered with textured / metallic front plate modules erected on / in wall / no 241.39

ceiling with following type accessories

Do - As - Above but for 6 A x 5 pin 250 Volt switched socket outlet point at convenient location. (Plug &

Switch can be together or at different location)

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on

surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box

158 40.00 covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with no 669.63

following type of accessories. [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories

Wiring for the 250 volts single phase and neutral 16 amps switched socket outlet with 4.0 sq.mm FRLS

flexible copper conductor 1100 volts grade wires of approved make with concealed or surface mounted

25 mm dia medium gauge PVC Conduit including providing and fixing of 16 amps 5 pin switch socket

159 1.00 outlet of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and the no 789.82

outlet box with 2.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.

Wiring for the UPS / Comp. / Raw Power outlet with 2 nos. of 250 volts single phase and neutral 16 amps

switched socket outlet with 2.5 sq.mm x 3 core FRLS flexible copper conductor 1100 volts grade wires of

approved make in concealed or surface mounted Prelaid 25 mm dia medium gauge PVC Conduit / Race

160 0.00 ways including providing and fixing of 2 no's of 16 amps 5 pin switch socket outlet of approved quality no 1,081.71 -

color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box. (Maximum 3 nos.

of Plugs can be looped in 1 Circuit)

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in approved manner as directed.

Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness

Supply and laying of 32 mm rigid PVC pipe of 1.6-1.8 mm thickness

Supply and laying of 40 mm rigid PVC pipe of 1.6-1.8 mm thickness

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

MAINS : (not for Point wiring)

Supplying and Laying of mains with Cu. PVC insulated flexible wire with ISI and FIA approval for

V/ 1100 V with earth wires of Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as

164 144.00 earth wires with Suitable dia rigid PVC Pipe of Heavy Gauge (Scope Also includes Supply of pipe.) mtr 307.04

Supplying and Laying of 2 nos. of 6 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm Cu. FRLS

flexible wires with 40 mm dia Pipe

Supplying and Laying of 2 nos. of 4 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm Cu. FRLS

165 628.00 flexible wires with 25 mm dia Pipe mtr 96.96

Supplying and Laying of 2 nos. of 2.5 sq mm Cu. FRLS flexible wires with 1 nos 1.5 sqmm Cu. FRLS

166 2632.00 flexible wires with 25 mm dia Pipe mtr 68.68

Supplying and Laying of 2 nos. of 1.5 sq mm Cu. FRLS flexible wires with 1 nos 1.5 sqmm Cu. FRLS

flexible wires with 25 mm dia Pipe

Distribution Board

Supply, Assembling, grouting, leveling Connecting & testing D.B of IP 43 of specified make.

Distribution Board-VTPN

168 2.00 Supply, Erecting, testing and commissioning of only VTPN D.B. with space for FPMCCB / FPMCB as no 12,786.60

incoming and 8 TPMCB / SPMCB as outgoing per phase (i.e. 8 way VTPN D.B.) of Legrand Make Cat.

Distribution Board-SPN

169 4.00 Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for DPELMCB as no 3,898.60

incoming and 8 SPMCB as outgoing per phase (i.e. 12 way D.B.) of Hensel Make KV9112M

Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for DPELMCB as

incoming and 4 SPMCB as outgoing per phase (i.e. 8 way D.B.) of Hensel Make KV7109M

All MCB's, ELMCB's, ELCB's should be of 10 KA only

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

6 to 32 A SP MCB

6 to 32 A DP MCB

6 to 32A / 100 mA DP ELMCB

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

40 A / 100 mA DP ELMCB

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA

178 9.00 breaking capacity & confirms to IS :8828 in existing box having following capacity no 527.22

(a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA

179 8.00 breaking capacity & confirms to IS :8828 in existing box having following capacity no 660.54

(b) 40 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA

180 9.00 breaking capacity & confirms to IS :8828 in existing box having following capacity no 595.90

6 to 32A FP MCB

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised

182 6.00 permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & no 3,168.37

transparent cover erected as required with necessary connection erected as directed.

183 9.00 25 Amp DP Dinrail Mounted Contactor no 3,171.40

184 9.00 40 Amp FP Dinrail Mounted Contactor no 5,459.05

185 22.00 SITC of IP65 Polycarbonate enclosure for DP MCB no 2,657.31

186 17.00 SITC of IP65 Polycarbonate enclosure for FP MCB no 2,852.24

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over

the run and backfilling the same and making the surface proper. Providing and erecting iron clad cable

187 2950.00 route marker duly marked with ELE.CABLE of size 23 cms.X 12 cms. Flushed with ground in cement mt 46.46

foundation as directed by Engineer in charge. The width shall be as per requirement

Covering of cable with second class bricks laid cover the cable crosswise & also on both sides with

covering of 7. 5 Cms. layer of sand above & below cable (cable shall be laid in 0.9mtr.deep &

Mtr.wide trench). Where there are more than one cable in the trench on either side of the cable, 5 Cms.

over lapping of bricks shall be provided.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Construction of brick masonry pulling chamber 450 mm x 450 mm inside clear size and depth up to

meter with 350 mm thick masonry in cement mortar proportion 1:5,cement finish cement plaster in CM

proportion of 15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum

mm thickness in M20 grade with reinforcement. The rate shall be inclusive of providing and fixing frame

189 2.00 and 450 mm dia cover of FRC for the Heavy Duty. Rate also inclusive of excavation and back filling & no 9,400.07

clearing the site by removing debris & Shifting of the debris & making site good As per the Instruction of

the Engineer In charge complete in all respect.

Construction of brick masonry pulling chamber 600 mm x 600 mm inside clear size and depth up to

meter with 350 mm thick masonry in cement mortar proportion 1:5,cement finish cement plaster in CM

proportion of 15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum

mm thickness in M20 grade with reinforcement. The rate shall be inclusive of providing and fixing frame

190 30.00 and 600 mm dia cover of FRC for the Heavy Duty. Rate also inclusive of excavation and back filling & no 10,527.23

clearing the site by removing debris & Shifting of the debris & making site good As per the Instruction of

the Engineer In charge complete in all respect.

Construction of brick masonry pulling chamber 750 mm x 750 mm inside clear size and depth up to

meter with 350 mm thick masonry in cement mortar proportion 1:5,cement finish cement plaster in CM

proportion of 15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum

mm thickness in M20 grade with reinforcement. The rate shall be inclusive of providing and fixing frame

191 16.00 and 750 mm dia cover of FRC for the Heavy Duty. Rate also inclusive of excavation and back filling & no 13,269.38

clearing the site by removing debris & Shifting of the debris & making site good As per the Instruction of

the Engineer In charge complete in all respect.

Construction of brick masonry pulling chamber 1000 mm x 1000 mm inside clear size and depth up to

1.0 meter with 350 mm thick masonry in cement mortar proportion 1:5,cement finish cement plaster in

CM proportion of 15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum

200 mm thickness in M20 grade with reinforcement. The rate shall be inclusive of providing and fixing

192 18.00 frame and 900 mm dia cover of FRC for the Heavy Duty. Rate also inclusive of excavation and back no 16,913.46

filling & clearing the site by removing debris & Shifting of the debris & making site good As per the

Instruction of the Engineer In charge complete in all respect.

Supply, Installation, Testing, Laying, Commissioning of following 1100 volt grade XLPE insulated

PVC sheathed aluminum / Copper conductor armored cables as per (IS:7098)(I)-88 ISI marked &

specification in trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps

193 0.00 including, saddles fixing bolts, connecting testing and commissioning with identification tags at every 10 mt 1,161.50 -

mtr. & Both ends. with All the fixing accessories, excavation Back filling & Cable protection with Bricks

as per the drawing ( If required ).

240 sq.mm x 3.5 c Al. XLPE Arm. Cable

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

50 sq.mm x 3.5 c Al. XLPE Arm. Cable

35 sq.mm x 3.5 c Al. XLPE Arm. Cable

25 sq.mm x 4 c Al. XLPE Arm. Cable

16 sq.mm x 4 c Al. XLPE Arm. Cable

10 sq.mm x 4 c Al. XLPE Arm. Cable

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.

(C) 3 core 6 Sq. mm

(B) 3 core 4 Sq. mm

Supply & Laying of 1.5 sq mm x 3 core round flexible wire in prelaid pipe / Raceway.

Cable Termination

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper

202 0.00 conductor armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck no 541.36 -

crimping lugs, double compression type Brass glands with earthing.

240 sq.mm x 3.5 c Al. XLPE Arm. Cable

50 sq.mm x 3.5 c Al. XLPE Arm. Cable

35 sq.mm x 3.5 c Al. XLPE Arm. Cable

25 sq.mm x 4 c Al. XLPE Arm. Cable

16 sq.mm x 4 c Al. XLPE Arm. Cable

10 sq.mm x 4 c Al. XLPE Arm. Cable

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper

conductor armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck

crimping lugs, double compression type Brass glands with earthing.

6 sq.mm x 3 c Al. XLPE Arm. Cable

SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper

conductor armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck

crimping lugs, double compression type Brass glands with earthing.

4 sq.mm x 3 c Al. XLPE Arm. Cable

SITC of Round Flexible wire end termination of the following insulated PVC sheathed copper conductor

Wires of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, IP66 / 67 -

210 704.00 3 mm thick Thermoplastic long entry glands of Hensel / Spelsberg with Strain relief and Lock nut. no 51.51

1.5 / 2.5 Sq. mm x 3 / 4 core round flexble wire or Similar dia wire

4 / 6 Sq. mm x 3 / 4 core round flexble wire or Similar dia wire

MV Switchgear & Power Panels -

Supply, Unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, &

Commissioning main L.T. panel board, fabricated from M.S. sheet & folded channel totally enclosed

cubical type compartmentalized. Scope Covers Unloading at Site, Store in Weather Proof Condition, Shift

to the Location Basement / GF / FF, Grouting, Installation, Testing & Commissioning complete in all -

respect & As per the instruction of Architect / Consultant / Engineer Incharge. Scope also covers Co

ordination with Panel Manufacturer.

Design, fabrication, assembling, supply, installation , testing of Panels for 415 V, 3 phase, 50 Hz, 4 wire

power supply system.

Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in

Form 4b Construction, floor mounted, free standing and shall be dust and vermin proof. 3 mm thick cable

gland plate, shall be provided both at the top and the bottom of the panel.

All large panels shall be provided with lifting hooks. Distribution panels shall be fabricated in accordance

with the specifications.

Note : Panel vendor has to provide Surge Protection at every stage of the Distribution. -

1) Supporting rigid steel framework. -

2) Cubicle type, 14 gauge CRCA sheet steel enclosed. -

3) Complete with interconnections and distribution bus bars. -

4) Proper bonding to earth. -

5) Painting/lettering on Breakers and distribution boards, the location they serve, providing on each

panel its circuit diagram.

6) Providing cable clamps / supports within distribution boards cable alley. -

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

7) TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link.

8) All MCB’s shall be of minimum 10 KA breaking capacity. -

9) The breaking capacity of MCCB’s are mentioned panel wise. -

10) All motor feeders MCCBs shall be of motor duty. -

11) Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.

12) Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-1993.

a) IP 52 for indoor panels.

b) IP 54 for kitchen and laundry panels. -

c) IP 55 for outdoor panels.

13) All MCCB’s shall be provided with operating mechanism for door interlock & with the roraty

14) Current density of aluminium shall be 1 sq mm for 0.8 amps for rated current of bus bars and current

density of copper shall be 1 sq.mm for 1 amps for rated current of bus bars.

15) Tinned copper earth bus as specified in the BOQ / SLD shall be provided through out the length of

16) All measuring instruments (Meters) shall be of digital electronic with LED of approved make and

compatible with BAS.

17) All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire. -

18) All panels shall have provision of the following:

a) IP 55 for outdoor panels. -

b) Pad locking of MCCB’s handles in “OFF” Position.

19) Additional set of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be

provided for BAS including space required for various transducers in Main Switch Board sections. Only -

transducers shall be supplied by BAS contractor.

20) All the C.T.s should be auto short link type. -

21) All the MCCB's should be with rotary handle. -

22) All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic

and inductive (motor) load shall be of type “C” characteristic and discharge lamps and UPS etc. shall be -

of type D characteristic.

23) All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in

single tier formation.

24) All PTs / control transformer shall be provided with centre tap earth secondary. -

25) If Any descripancy found in SLD & BOQ, it should be brought in the notice of the Client /

Consultant, Client / Consultant's decision will be final in case of any descripancy.

26) G.A. Drawing should be checked & Finalised by consultant before fabrication. -

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Incoming MCCB `A’

(For supply Company Meter)

400A FP (36KA) MCCB With thermal megnetic release & Rotary handle unit for protection and

measurment as per specification and with following accessories : 1 Set.

LED type Phase indicating light shall be protected by 2 amps MCB’s.

MCCB ON / OFF / TRIP indicating lights with control MCB’s.

Under voltage release

24 V DC Shunt trip coil

Under voltage relay with timer (27)

212 0.00 Over voltage relay with timer (59) no 4,31,123.55 -

3 Nos. of Digital type 0-400 / 5 amps CTR digital ammeter with 3 nos 400 / 5 amps, 15 VA Class I CT’s.

Digital type 0-500 Volt digital voltmeter with inbuilt selector switch & shall be protected by 2 amp TP

Load Manager of Schneider make PM 210 with RS 485 connectivity with 3 nos. of Class 1, 400 / 5 Amp.

400 amps 4 pole (50 KA) Copper tinned bus bars with colour coded heat shrinkable insulating sleeves.

Bus Coupler : Breaker `B’

400 amps 4 pole motorized MCCB (36KA) with built in microprocessor based release unit for protection

Incoming MCCB / TRIP

`C’ indicating lamps with control MCB’s, shunt trip, 24 volt DC U.V. breaker

(For DG set Power supply)

400A FP (35KA) MCCB With thermal megnetic release & Rotary handle unit for protection and

measurment as per specification and with following accessories : 1 Set.

LED type Phase indicating light shall be protected by 2 amps MCB’s.

MCCB ON / OFF / TRIP indicating lights with control MCB’s.

Under voltage release

24 V DC Shunt trip coil

0.00 Under voltage relay with timer (27) 0.00 -

Over voltage relay with timer (59)

3 Nos. of Digital type 0-400 / 5 amps CTR digital ammeter with 3 nos 400 / 5 amps, 15 VA Class I CT’s.

Digital type 0-500 Volt digital voltmeter with inbuilt selector switch & shall be protected by 2 amp TP

Load Manager of Schneider make PM 1000 with RS 485 connectivity with 3 nos. of Class 1, 400 / 5 Amp.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

100 amps 4 pole MCCB ( 16 KA ) : 2 No

63 amps 4 pole MCB ( 10 KA ) : 4 No.

40 amps 4 pole MCB ( 10 KA ) : 6 No.

25-32 amps 4 pole MCB ( 10 KA ) : 4 No.

6-32 amps 2 pole MCB ( 10 KA ) : 6 No.

ALL THE INCOMING BREAKER & BUS COUPLER SHOULD BE INTERLOCKED WITH EACH

OTHER WITH HARD WIRING.

BREAKER SHOULD BE CAPABLE TO SWITCHED 'ON' & 'OFF' AUTOMATICALLY AS PER

POWER AVAILABILITY. AS PER DETAIL SPECIFICATION.

0.00 All outgoing feeders shall have suitable range of followings 0.00 -

a. Three LED type Phase indicating lamps shall be protected by 2 amps SP MCBs.

All breakers shall be electrically/ mechanically interlocked as per schematic diagram.

All MCCB’s shall be suitable for ICS = ICU breaking capacity.

All ACB's shall be suitable for 50 kA (Icu=Ics=Icw for 1 sec.)

415 / 110 V suitable rating control transformer shall be provided for aux. Control supply

Wiring with space heater, thermostat and control MCB’s shall be provided all vertical sections of main

All MCCB’s feeders shall be provided with built-in microprocessor release unit with earth fault

protection and time delay.

All incoming as well as outgoing feeders shall have pad locking facility.

suitable danger board shall be provided.

IP65 External Lighting

63 amps FP MCB (10 KA) with following accessories: 1 Set

Breaker ON / OFF / TRIP indicating lights with control MCB’s.

Under voltage release

24 V DC Shunt trip coil

3 Nos. of 0-63/ 5 amps CTR digital VAF with 3 nos 63 / 5 amps, 15 VA Class 0.5 CT’s.

Digital type 0-500 Volt digital voltmeter with inbuilt selector switch & shall be protected by 2 amp TP

63 amps FP Tinned copper bus bars with coloured heat shrinkable insulated sleeve.

All the outgoing should be provided with RYB - On - Off - Trip I/L . (For MCCB only)

6-32 amps 4 pole MCB (10 KA) : 9 Nos.

6-32 amps 1 pole MCB (10 KA) : 18 Nos.

32A DP Contector : 9 No.

Astronomical Digital time switch : 3 No.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%, CCT 3000 K to 6500K,

214 58.00 Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % (fitting required LM-79 & LM- no 373.70

80 Certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet, Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % (fitting required LM-79 & LM-

215 305.00 80 Certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The no 535.30

Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet, Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more

216 48.00 than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver no 220.18

efficiency > 85 % (fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

/ CRCA / aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.9,

THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED driver efficiency > 85 %

217 171.00 (fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have shown ranges of Wattage no 589.84

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete. IP20 (iii) 16-20 watts, Surge-2 KV

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved

218 73.00 or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to no 6,566.01

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.

(fittings required LM-79 & LM-80 certificates) (NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(A) Street Light

Supplying (IP-65),LED

and erecting Surgestreet

Floodintegral and,Light

light fittings withmust

Highhave 440VAC

power White line

LEDs supply withof

Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved

219 227.00 or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to no 10,818.11

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.

(fittings required LM-79 & LM-80 certificates) (NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(C) Light (IP-65),

LED Bollard fittings Surge protection

of minimum -4KV

height integral

1000 mm and, Light musthaving

& dia.100mm have 440VAC line supply

polycarbonate with

diffuser mounted on 3mm thick aluminium finished powder coated pipe with base plate 160x160mm with

erection by M8x75mm fastner with required RCC foundation.IP65 for 9 to 20 watt and above ,surge-4kv

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy

221 139.00 fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and accessories wired upto no 4,819.72

terminal block. IP 65 (ii) 32-40W

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

SITC of SOLO Outdoor Architectural RGBW LED Mini Flood light luminaire with system Wattage 15W

(± 5%), Available in 5700K/4000K/3000K/2700K/RGBW CCT with System Efficacy not less than

90Lm/W for White CCTs and 45Lm/W for RGBW, PMMA Seconday Lens Covered with Clear PC Lens

Enclosure for higher impact Resistance, Optics with Narrow/Medium/Wide Distribution, Available Beam

Angles Options 15°/30°/45°/60°, CRI>80 for White color, High grade silicon Gasket ensuring IP

Protection, Compatible for DMX512 with Inbuilt 4 Channel Decoder for RGBW CCT, THD<10%,

PF>0.9, LED life 50,000 BHRS@L70, PDC Aluminium Alloy housing for optmium thermal

management, Light Engine PCB should be Metal Core PCB made of high grade Al 5052 with ≥70 micron

copper thickness & 2 W/mk thermal conductivity for better thermal maintanance for light Engines.

Corrosion resistant Nano technology power coating of Silver Grey/Black Color/Terracota Red (As per

selection by Dept. or Architect) . Luminaire has a Ingress protection of IP66 and Impact Resistance of

222 153.00 IK08. Integral encapsulated high efficiency electronic driver having a with rated voltage of 90-305V AC, no 10,918.10

Inbuilt surge protection of 4KV L-L, 6KV L-E with Additonal IP67 SPD of 20KV/10KA surge protection

with all necessary safety protection like mis-wiring, Over voltage, Short circuit, Reverse Polarity

protection. Suitable for Mounting on Surface/Wall using Mounting Station. IES, LM 79, LM 80, & TTC

certificates will be provided from NABL accredited lab.

Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07,

Surge : IEC 61000-4-5, EMC : EN

Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for

Luminaires & Drivers Manufacturer should have their own NABL accredited testing laboratory for EMI-

EMC test, Vibration. compatibility test, Salinity spray test, wind load pressure test, IP / IK test, Powder

coating facility, in house casting plant, robo-photometric laboratory and Driver manufacturing facility,

SMT line in India. The Manufacturer Name and Logo should be engraved / Embossed on the

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

SITC of LINEAR WALLWASH NI 50 Outdoor Architectural LED Linear luminaire with system Wattage

10W/ 15W/20W/30W/40W (± 5%) , Available in color temperature 5700K/4000K/3000K/2700K/

RGBW CCT with System Efficacy 70Lm/W for Mono Colors and 40Lm/W for RGBW. RGBW

Luminaires must be 4in1 chip with each LED emitting same color while changing scenes and compatible

with DMX512. Extruded Aluminum housing with PDC Endcaps ensuring optimum thermal management.

Light Engine PCB should be Metal Core PCB made of high grade Al 5052 with ≥70 micron copper

thickness & 2 W/mk thermal conductivity for better thermal maintanance for light Engines. Powder

coated by Corrosion resistant Nano coating technology. Clear Secondary Lens covered with Heat

resistance IK05 Toughened glass Enclosure, High Grade silicon sealent between Glass & Housing

ensuring IP Protection. Beam angles available in Symmetrical-10°(except RGBW) ,15°,30°,45°,60°.

Elliptical-10°X30°,10°X60°, 30°X60° . LEDs life of 50000 HRS@L70 at25deg. Ingress protection of

223 30.00 IP66. Driver shouldbe Non-Integral type Electrically Isolated 24V DC CV Outdoor Driver (To be Order no 15,447.95

Seprately). high efficiency Driver, Rated voltage of 140-270V, power factor > 0.95, THD < 10%. Inbuilt

surge protection of 6KV and upgraded with integrated IP67 protected SPD of 20KV/10KA surge

protection with all necessary safety protection like mis-wiring, Over voltage, Short circuit, Reverse

Polarity protection. Standard Dimension for wattages (L : 1200/1000/600/500mm W : 36mm H: 39mm)

excluding mounting clamp. Suitable for Surface/Wall Mounting using Inbuilt Mounting Brackets. IES,

LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab.

Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07,

Surge : IEC 61000-4-5, EMC : EN

Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for

Luminaires & Drivers Manufacturer should have their own NABL accredited testing laboratory for EMI-

EMC test, Vibration. compatibility test, Salinity spray test, wind load pressure test, IP / IK test, Powder

SITC of MAZE NEON FLEX Outdoor Architectural IP67 Flexible 24V DC LED Strip with Spotless &

Uniform diffused illumination. System wattage 5W/10W/15W Per Mtr. with 5Mtr./10Mtr. Single std.

length, System efficacy>40LPW (±5%), Available in 2200K/3000K/4000K/6500K/RGBW CCTs, RGBW

Version should be compatible with DMX512, UV Resistant Silicon construction with Open diffused

optics. Neon Flex Should have bending radious of Min 300mm, Ingress Protection should be IP67. Driver

should be Non- Integral type high efficiency 24V DC CV Outdoor Rated driver (To be ordered Seprately).

Life 50,000 B Hrs@L70B10, CRI>80, THD<10% , Operating ambient Temp -25°C to +50°C, Operating

Humidity 10-90%. Luminaire should have 5 Years warranty. Suitable for Surface mounting using

Aluminium channel and fixing accessories. Technical Data Sheet, Type test Certificate from In-House

224 70.00 NABL accredited Lab should be submitted on request. End Caps should be solder less or Silicon End caps no 5,807.50

maintaining IP67 rating. For RGBW Flex, IP Box with Compatible Driver & Decoder should be ordered

& supplied Separately.

Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07,

Surge : IEC 61000-4-5, EMC : EN

Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for

Luminaires & Drivers Manufacturer should have their own NABL accredited testing laboratory for EMI-

EMC test, Vibration. compatibility test, Salinity spray test, wind load pressure test, IP / IK test, Powder

coating facility, in house casting plant, robo-photometric laboratory and Driver manufacturing facility,

SMT line in India. The Manufacturer Name and Logo should be engraved / Embossed on the

housing/body to allow traceability till the life of the fixture , No sticker will be acceptedLuminaires

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

SITC of STEP LINEAR Recess Outdoor Architectural Retangular LED luminaire with Available system

Wattage 6W/12W (± 5%) with System Efficacy not less than 65Lm/W, Diffused Optics with Asymmetric

Downwards Distribution, 100% DLOR ensuring No upwards light spilage or Glare, Available in

3000K/4000k/5700K CCT, CRI>80, SDCM<5 , THD<5%, PF>0.9, LED life 50,000 BHRS@L70, PDC

Aluminium Alloy housing for optmium thermal management, UV Stabilized Injection molded PC

diffuser for wide distribution, PCB of Light Engine should be Metal Core PCB made of high grade Al

5052 with minimum 70 micron copper thickness & 2 W/mk thermal conductivity for better thermal

maintanance for light Engines. Corrosion resistant Nano technology power coating of Silver Grey/Black

Color/Terracota Red (As per selection by Dept. or Architect) . Luminaire has a Ingress protection of IP66

and Impact Resistance of IK08. Integral encapsulated high efficiency electronic driver having a with

rated voltage of 140-270V, Inbuilt surge protection of 6 KV with IP67 Rated SPD of 10KV surge

225 18.00 protection with all necessary safety protection like mis-wiring, Over voltage, Short circuit, Reverse Mtr 4,297.55

Polarity protection. IP67 Supply Input Gland, Suitable for Recess ounting on Wall using Specially

designed Recessing BOX. IES, LM 79, LM 80, & TTC certificates will be provided from NABL

accredited lab.

Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07,

Surge : IEC 61000-4-5, EMC : EN

Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for

Luminaires & Drivers Manufacturer should have their own NABL accredited testing laboratory for EMI-

EMC test, Vibration. compatibility test, Salinity spray test, wind load pressure test, IP / IK test, Powder

coating facility, in house casting plant, robo-photometric laboratory and Driver manufacturing facility,

SMT line in India. The Manufacturer Name and Logo should be engraved / Embossed on the

housing/body to allow traceability till the life of the fixture , No sticker will be acceptedLuminaires

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

SITC of MAZE NEON FLEX Outdoor Architectural IP67 Flexible 24V DC LED Strip with Spotless &

Uniform diffused illumination. System wattage 5W/10W/15W Per Mtr. with 5Mtr./10Mtr. Single std.

length, System efficacy>40LPW (±5%), Available in 2200K/3000K/4000K/6500K/RGBW CCTs, RGBW

Version should be compatible with DMX512, UV Resistant Silicon construction with Open diffused

optics. Neon Flex Should have bending radious of Min 300mm, Ingress Protection should be IP67. Driver

should be Non- Integral type high efficiency 24V DC CV Outdoor Rated driver (To be ordered Seprately).

Life 50,000 B Hrs@L70B10, CRI>80, THD<10% , Operating ambient Temp -25°C to +50°C, Operating

Humidity 10-90%. Luminaire should have 5 Years warranty. Suitable for Surface mounting using

Aluminium channel and fixing accessories. Technical Data Sheet, Type test Certificate from In-House

NABL accredited Lab should be submitted on request. End Caps should be solder less or Silicon End caps

maintaining IP67 rating. For RGBW Flex, IP Box with Compatible Driver & Decoder should be ordered

226 36.00 & supplied Separately. Mtr 3,136.05

Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07,

Surge : IEC 61000-4-5, EMC : EN

Certification: CE Certified, Design Patented/Registered, ROHS compliant, BIS Certification for

Luminaires & Drivers Manufacturer should have their own NABL accredited testing laboratory for EMI-

EMC test, Vibration. compatibility test, Salinity spray test, wind load pressure test, IP / IK test, Powder

coating facility, in house casting plant, robo-photometric laboratory and Driver manufacturing facility,

SMT line in India. The Manufacturer Name and Logo should be engraved / Embossed on the

housing/body to allow traceability till the life of the fixture , No sticker will be acceptedLuminaires

specified in the luminaire should have BIS certificate. Manufacturer should have Certification pertaining

to product Design Registration, CE certifications, ROHS compliant, BIS certificate for drivers and

luminaires respectively.

227 9.00 Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 no 1,703.87

RPM with square frame ABS body with inbuilt lowers & square frame.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty having following dia size and maximum speed in

[A] 305 mm dia 900 RPM

Providing suitable M.S. louver shutter of the Exhaust fan.

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium

blades with , canopy & 30 cms. down rod erected with 24/ 0.2, 3 core flexible wire with earthing.(fan

colour shoud be Gray)

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted

for fan complete with necessary 24/ O.20, 3 core flexible wire with earthing.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Supplying & erecting funnel type earthing having earth plate of following size burred in specifically

prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt with alternate layers of charcoal &

salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover

complete as per para 7.3 of IS 3043 with necessary length of double Galvanised Iron / copper earth wire

232 4.00 No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete no 7,874.97

connected to the nearest switch gear with end socket as per direction & duly tested by earth tester

confirming to IS (As per drawing) with following specification

60 x 60x 0.315 cms. Copper earth Plate

45 x 45 x 0.35 cms. C.I. earth plate

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes

having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-

250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by

234 19.00 highly conductive compound with high charge dissipation suitable for following type of applications. no 10,593.89

For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System (like Automation, SCADA) i.e. independent Earthing located in other than

normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

Earth wire/strips :

Supply and laying cu. earthing strips for interconnecting the earthing stations, panels, DB's etc. in built up

trenches, on walls/ceiling, buried in ground generally as specified and shown on drawings complete with :

235 650.00 fixing accessories kg 77.77

Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes.

Providing and erecting HOT deep Galvanized strip iron wire 8 to 16 S.W.G.

32x 6 mm cu. Tape

25 x 3 mm cu. Tape

No.8 gauge bare cu. earth wire

239 16.00 Earth Link : 40mm x 6 mm earth link fixed by necessary screws on wall. mtr 373.70

SITC of Water Tight Junction Box With necessary clamp for mounting of the J.B. (All the cable / wire

connections to the JB shall be with the Water tight Glands only)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Telephone Point Wiring

Supply and laying of specified make 0.51 mm dia Tinned copper telephone wire of specified make to be

241 25.00 done in prelaid PVC pipe of 25 mm dia/raceway of specified make, but without the cost of pipe or mtr 38.38

raceway. (the wire is to be drawn from Krone connector of respective area to outlet point)

5 pair telephone wire

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

Telephone Outlet Point

SITC OF PowerCat 6 DataGate Jack, 568A/B - Yellow with Dust Cover / Blank/ One Telephone Point to

be done with Cat -6 Information outlet Socket, Back Box, Face Plate for all telephone point. Average

243 1.00 Length to be considered as 50 Meter. Cable Laying, Labling, Ferrule, Testing, Certification to be included no 153.52

in cost. 20 Years of Certification is required. Test reports of Level-4 Scanners only.

SITC OF DG+ Jack (Diecast)Cat6A 568A/B, Shtd- Black (Information Outlet for Data) with Faceplate,

back box CAT-6A standards. Cable Laying, Labling, Ferrule, Testing, Certification to be included in cost.

20 Years of Certification is required. Test Reports of Level-4 Fluke Scanners Only.

SITC of Jack Panel, fully loaded with 24 nos. UTP ports for PCB based IO Jacks (RJ45, TIA-568C

Category-6, Installation and Termination of all 24 nos. Catergory-6 UTP , unloaded with individually

245 2.00 replaceable 24 nos. Category-6 I/O Jacks complying with TIA-568.C.2, as per given jack specification no 4,400.57

Shall be suitable for loading unshielded & shielded jacks for different category systems (CAT 6 & CAT

246 2.00 Supply, installation, testing and commissioning of Patch Cord-1m no 191.90

Supply, Installation, Testing and Commissioning of H.265 4MP IR Vandal Proof Dome N/W Camera,

2.8mm, 30M IR, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 1 / 2.7" CMOS, 2560 × 1440, 0.01 Lux,

247 12.00 F1.2, AGC ON; Defog, True day/night, Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart Nos. 14,296.55

codec by ROI, Basic intelligent video analytics, NDAA Compliance, UL, CE, FCC Certified

Supply, Installation, Testing and Commissioning of H.265 4MP IR Bullet N/W Camera, 3.6mm, 50M,

Micro SD, DC12V/PoE, IP67,IK10, Basic IVA, 4MP resolution (2560 × 1440), 0.01 Lux,F1.2,AGC

ON,True day / night, Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Basic

intelligent video analytics, NDAA Compliance, UL, CE, FCC Certified

Supply, Installation, testing and commissioning of Intel Core i5 12C Processor 25M Cache, up to

GHz / 16GB DDR5 / 512 SSD / Win 10 Pro Operating System / No Monitor / DVD RW / 3 Yrs NBD / PS

500W/ NVIDIA T600 4 GB GDDR6 Workstation Graphics Card including 4 mDP to DP adapters

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

SITC of 32 Channel NVR having features smart H.265+/H.265/ Smart H.264/H2.64/MJPEG, Max

Mbps incoming Bandingwidth, support min 2 SATA HDDs Slot - each slot supporting min 8TB, Up to

MO Resolution for Preview and Playback and with 8 TB Survellance Hard Disk

Supply, Installation, testing and commissioning of 55" UHD Signage/Professional Display|500 Nits

Brightness |50000:1 Contrast Ratio | Operation: 24x7|1xVGA; 2xUSB 2.0 , 4x HDMI 2.0 In, Secure USB

2.0 (Internal), RJ45, RJ12, RS232, Optical SPDIF|1xHDMI 2.0 out, Supports Daisy Chain |Speaker 2x10

W|30-degrees Tilting Installation | Open Content Management Support, Scheduler, USB-Autoplay,

251 5.00 AutoLaunch, HDMI-CEC, HDMI-Wakeup, Auto-switch on Failover, Panel Lock, OSD Rotation, Nos. 92,384.70

NoSignalPowerOff, Screen Saver, Pixel shift,Scheduler, Videowall support, Remote control via LAN,

Realtime Clock, Joystick, Rocker Switch| Optional : SDM or OPS compatibility, Embedded IR, IR

extender option | Optional: Overlay Touch Kit Compatibility|Certifications: Safety, EMC, CE

Supply, Installation, testing and commissioning of 9U/600 Rack/ Welded / WM / Off White,Glass Door /

9U / WM / Gray, Server / IT Rack mount power distribution unit, 1Ph, 230V, 16A, 50/60Hz, 2U standard

with 6 X Indian Round Pin 5/15A, Inlet Plug type 16A Indian Round Pin, 16A MCB - PDU Rating

252 5.00 3.6KVA/Side feed-1.5Mt/ Black,Horz. Cable Organiser / 1U / Loop,Cantilever Shelf / Type2 / 1U / Off Nos 13,402.70

White, Mounting Hardware-CR (Pack of 20), ITE / Server Rack Air Circulation module / 90CFM

Supply, Installation, testing and commissioning of UTP 4 pair 23 AWG CAT 6A LSZH Cable in the

existing surface/ recessed steel/ PVC conduit as required conforming to the following standards like ANSI

TIA/TIA 568.2-D, ISO/IEC 11801. Cable Dia 7.6 mm with bending radius - 4 X Cable Diameter, pulling

force is 11.5Kg. Operates at frequency of 500 Mhz

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

Supply and laying of Cat-6 STP LSZH UV outdoor cable in PVC conduit with termination as per TIA

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge.

(8) Computer RJ-45 socket

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Street Light Pole

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC

filament winding machine using thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in shape, having smooth finish and

should be totally free from corrosion as well as non conductive & shock proof Pole should be provided

with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly

weather resistant polyurethane coating shall be applied to the pole after applying suitable primer system

that ensures proper adhesion of the paint. Minimum coating thickness shall be 80 to 100 micron.

Deflection of the pole shall not exceed more than 10% of the length of pole for the given load“ Pole

257 136.00 should be generally made as per the dimensional data, performance criteria and some interchangeability NO 9,792.96

features of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable

termination box with necessary accessories . The size of pole and type of installation with foundation as

per manufacturer details and site requirement are as below .

(1) Suitable for base plate mounting single arm Bracket.

[D] Overall length of 4 Mtr. Average Thickness: 7mm.

Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx. Weight of Pole 19 kg approx. (Without

Anchor Base (Size 250 x 250 & 12mm th.)

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC

filament winding machine using thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in shape, having smooth finish and

should be totally free from corrosion as well as non conductive & shock proof Pole should be provided

with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly

weather resistant polyurethane coating shall be applied to the pole after applying suitable primer system

that ensures proper adhesion of the paint. Minimum coating thickness shall be 80 to 100 micron.

Deflection of the pole shall not exceed more than 10% of the length of pole for the given load“ Pole

258 43.00 should be generally made as per the dimensional data, performance criteria and some interchangeability no 18,938.51

features of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable

termination box with necessary accessories . The size of pole and type of installation with foundation as

per manufacturer details and site requirement are as below .

(2) Suitable for base plate mounting Double arm Bracket.

[G] Overall length of 8 Mtr. Average Thickness: 8mm, Top/ Bottom OD Dia A/F114/195 mm ± 2mm

approx. approx. Weight of Pole 54 kg approx. (Without Base) Anchor Base (Size 350 x 350 & 20mm th.)

Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone

metal duly plastered with necessary curing for pole muffing or any other purpose.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing TMT Bar FE 500/500D reinforcement for RCC work including bending, binding and placing in

position complete upto floor two level

261 22.00 Any kind of 0.1 to 2Mtr. Decorative Single Arm Bracket no 6,504.40

262 10.00 Any kind of 0.1 to 2Mtr. Decorative Double Arm Bracket no 7,782.05

263 5.00 Any kind of 0.1 to 2Mtr. Decorative Three Arm Bracket no 10,453.50

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of

M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding &

264 1900.00 finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in no 77.77

charge with necessary grouting, cementing, plastering & finishing complete.

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968

& BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally

enclosed air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than

following capacity at 1500 RPM with 10% overload for one hour in 24 hours with standard accessories

like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter,

oil bath air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with

adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil

filter, 12 / 24 volts electric starting equipment complete with standard heavy duty battery, dynamo, cut-

outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust

silencer and vertical hot air duct both logged with asbestos rope, save oil trays, exhaust piping of required

265 3.00 length, standard wall/floor mounted fuel with level indicator and piping and drip proof alternator, self no 5,24,003.15

excited, self regulated, screen protected, with excitation system, capable of delivering the rated system

output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-

with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine and alternator

fitted on a common fabricated steel base plate with antivibration mounting engine and alternator both

connected to each other by flexible flange coupling and with floor/wall mounted control panel box

comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate

capacity,indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected

with provided suitable capacity armoured cable and complete with Acoustic enclosure (canopy) made out

of 16 SWG CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick conforming

to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded rockwool covered from inside the

canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V.,

50 cycles, A.C. diesel generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator)

Overload relay for generator contactor Neutral contactor for mains and generator Power socket for

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items

attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation.

266 3.00 Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine 97,320.57

hour meter. Two earthing studs.

3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder

head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

(A) AMF Control Panel for 50/62.5 KVA 3 phase DG Set

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary

267 8.00 clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. no 6,591.26

For 4.5 Kg Capacity, including maintaining/ renewal validity of all Co2 fire extinguisers up to the

completion of O&M period

268 10.00 Supplying & Erecting automatic emergency light with maintenance free battery for 20 watts tube. no 3,939.00

Supplying rubber matting of following thickness as per IS : 15652/IEC61111

Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be

erected as per IS.

Providing printed instruction chart both in English and Gujarati and duly framed with front glasses, for

treatment of person suffering from Electric shock

SITC of IP66 Water Tight Junction Box 167mm x 125mm x 82mm With necessary clamp for mounting of

the J.B. (All the cable / wire connections to the JB shall be with the Water tight IP 66 Polyamide Glands,

open Holes should be sealed with the IP65 Grommets only) J. B. Should be provided with Hensel make

272 19.00 cable connectors to connect 1 nos. of 6/10 sq. mm. x 4 core cables+ 4-5 nos. of 4 sq. mm x 4 core wires + no 13,210.80

Earthing wires. of Hensel make cat. no. KD5105 + Connectors + IP65 Glands + IP65 Grommets or

splesberg make.

SITC of IP66 Water Tight Junction Box 139mm x 115mm x 70mm With necessary clamp for mounting of

the J.B. (All the cable / wire connections to the JB shall be with the Water tight IP 66 Polyamide Glands,

open Holes should be sealed with the IP65 Grommets only) J. B. Should be provided with Hensel make

273 19.00 cable connectors to connect 1 nos. of 6/10 sq. mm. x 4 core cables+ 4-5 nos. of 4 sq. mm x 4 core wires + no 11,829.12

Earthing wires. of Hensel make cat. no. KD5065 + Connectors + IP65 Glands + IP65 Grommets or make

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing & laying. Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )

Anti Rodent type with necessary connecting accessories of same material at required depth for laying of

274 4350.00 cable. below ground / road surface for enclosing cable and backfilling the same to make ground as per mt 62.62

Providing & Erecting full SS Body (SS 304) Split type water cooler having storage capacity 160 to

Ltr.(Tank SS 304) & Cooling capacity 150 ltr. Per hour @ an ambient temp of 350 C.The outlet temp. of

the water should drop by 150C within a hour,The water cooler should be comprising of hermetically

277 4.00 sealed Reciprocating compressor with R134A, fan motor, Copper Condensing unit,water tank surrounded no 51,145.39

by evaporating coil, thermostats, relay etc.complete with necessary copper tube & Insulation, M.S Chanel

Stand with Painting for water tank & M.S. Powder Coated Stand for Outdoor unit with Installation.

With DPELCB and 4 Way DB Box with accessory Three core Cord for connection.

Supplying and erecting water filter cum purifier with ultra violate technology. (Aquaguard / waterdoc

model or equivalent symphony/ crystal/videocon model)

Air Conditioning System

Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit

with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately

erected evaporating unit and blower motor with its accessories by means of extra supplied proper

279 1.00 insulated copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly no 38,820.36

green gas charging, 15A plug top & Remote Control) with necessary core cutting.

For 3 Star Rating of current year

(c) for 2 ton capacity

Supplying & installing MS standard type stand mounting for outdoor unit of Split A.C. upto 4 TR capacity

erected with necessary hardware materials as directed.

Supplying and erecting insulated pair of soft copper tubing including power and control cable,necessary

PVC drain pipes for Split AC machine up to 4 TR capacity

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame With Twin Wall

Profile, Front Cover : High Transmission Low-Iron Tempered Glass (AR Coated), High efficency and

positive power tolerance Pmax: 0/+5, Module Efficiency should be approx. 18%-21%, Normal operating

temperature 45'C, Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with Bypass

diodes, 100% Electroluminescence test to ensure error free Modules, Thep. temp. co-efficient of the PV

module shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill factor 75% to be

used. Unit Production:- 4 to 5 Unit /kw /day (Actual)(1Year Avg) With 10 year Product warranty and

year Linear Power Warranty., Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output Over Current Protection Per/

282 86.00 Integrated, Output Short Circuit Protection Integrated, Output Over Voltage Protection Integrated, 42,455.35

Protection Degree: IP65, User Interface LCD & APP,Datalogger & Communication: GPRS / Wi-Fi,

Module Mounting Structure: Seamless Box Pipe / 'C' Channel of suitable size for rooftop solar

installations with good stability agaist wind & weight load., Hot Dipped Galvanized steel coils. suitable

arrangement for base plate for foundation , solar panel mounting, the structure should be suitable for carry

the load of solar panel,wiring, sprinkler system etc. with necessary foundation work/wall mount, j bolt,

anchor fastner etc. the nut bolt used for installtion of stucture should be (SS 304) quality. and Balane of

System with necessary Swithgears (Suitabel size and protection of ACDB & DCDB), inter connecting

wiring, earthing system, lightining arrester system, all liasoning work with various gov. dipartment like

state nodal agency, DISCOM & CEIG is included in agency scope, Solar Inverter: MPPT Range: 80-1000

V, Max efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power

Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-islanding Protection:

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure poluthene pipes of the

283 460.00 following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. Rmt 78.90

including making good the wall ceiling and floor. (A) 20mm

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure poluthene pipes of the

284 460.00 following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. Rmt 101.49

including making good the wall ceiling and floor. (B) 25mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the

285 250.00 following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. Rmt 117.56

including making good the wall ceiling and floor. (C) 32mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the

286 250.00 following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. Rmt 125.67

including making good the wall ceiling and floor. (D) 40mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the

287 485.00 following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. Rmt 165.44

including making good the wall ceiling and floor. (E) 50mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the

288 385.00 following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. Rmt 277.43

including making good the wall ceiling and floor. (F) 75mm

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the

289 485.00 following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. Rmt 336.24

including making good the wall ceiling and floor. (G)110 mm

290 9.00 Providing and fixing in position cowel went to pipes. (B) 75mm dia. Each 389.74

291 9.00 Providing and fixing in position cowel went to pipes. (C) 100mm dia Each 501.87

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed

292 21.00 concrete, foot reste and trap to be measured and paid for separately) Each 936.96

(A) Vitreous China. (I) Long pattern = White colour

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately).

(A) vitreous China Pattern : (i) in white colour

Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap

with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand) (A) Vitreous China.

Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand)a, pair of white vitreous China

mm x 130 mm x 30 mm footrest to long pattern squatting pan water closet.

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete

with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia.

296 21.00 porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the Each 2,344.42

flush bend with cistern and closet (overflow pipe to be measured and paid for separately)

(A) Vitreous China (I) In white colour

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white

297 21.00 including sutting holes and making good the same but excluding fittings. Each 1,632.89

(A) Vitreous China : (ii) Flat Back washbasin 550 mm x 400mm size. (i) In white colour.

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in

298 20.00 walls and making good the same but excluding fittings. Each 2,280.27

(C) Vitreous China Sink.(i) 600 mm x 450 mm x 150 mm size

299 20.00 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. Each 67.91

300 20.00 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. Each 89.83

301 20.00 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. Each 89.83

302 20.00 Providing and fixing M.I. fisher union for washbasin or sink. (B) 40mm dia. Each 78.75

303 6.00 Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap. Each 36.98

304 21.00 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each Each 282.16

Providing and fixing 600 mm x 450 mm bevelled edge mirrror of superior glass mounted on 6 mm thick

305 26.00 A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. Each 833.73

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with

306 21.00 C.P. brass scews. Each 603.19

(B) 600 mm x 20 mm size.

Providing and fixing 600 mm x 120 mm glass shelf with C.P. brass bracket and guard rail complete mixed

to wooden plug with C.P. brass screws.

Providing and fixing toilet paper holder.

Providing and fixing screw down bib taps of following size. (A) Brass screw down bib tap polished

bright. (i) 15 mm dia.

Providing and fixing screw down bib taps of following size. (A) Brass screw down bib tap polished

bright. (ii) 20 mm dia.

Providing and fixing screw down bib taps of following size. (B) Brass chromium plated screws down Bib

Tap. (i) 15 mm dia.

Providing and fixing screw down bib taps of following size. (B) Brass chromium plated screws down Bib

Tap. (ii) 20 mm dia.

Providing and fixing screw down bib taps of following size. (C) Gun metal screw down bib tap.

Providing and fixing screw down bib taps of following size. (C) Gun metal screw down bib tap.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back

nuts. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back

nuts. (ii) 20mm dia.

317 45.00 Providing and fixing brass screw down stop tap. (A) 15mm dia. Each 205.83

318 45.00 Providing and fixing brass screw down stop tap. (B) 20mm dia. Each 223.81

319 45.00 Providing and fixing brass screw down stop tap. (C) 25mm dia. Each 220.82

320 45.00 Providing and fixing Gun metal check or non-return fullway wheel valve. (A) 15mm dia. Each 186.83

321 45.00 Providing and fixing Gun metal check or non-return fullway wheel valve. (B) 20mm dia. Each 203.82

322 45.00 Providing and fixing Gun metal check or non-return fullway wheel valve. (C) 25mm dia. Each 420.63

323 45.00 Providing and fixing Gun metal check or non-return fullway wheel valve. (D) 32mm dia. Each 314.73

324 45.00 Providing and fixing Gun metal check or non-return fullway wheel valve. (E) 40mm dia. Each 663.43

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in

pipe line etc. complete. (i) 20 mm dia.

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in

pipe line etc. complete. (ii) 25 mm dia.

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in

pipe line etc. complete. (iii) 32 mm dia.

Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc.

328 9.00 complete. Each 1,036.27

(A) White earthenware flat back or corner type size 430 mm x 260 mm x 350 mm.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing Urinal of approved quality including connection with trap and with integral

329 20.00 longitudinal flush pipe. Each 1,550.99

(A) Squating plate pattern white earthenware 550 mm x 300 mm.

330 20.00 Providing and fixing Rubber plug for sink or wash basin. Each 17.15

Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash

Providing and fixing ball cock of approved. quality as directed.

(A) Copper Metal (i) 25mm dia.

Providing and fixing ball cock of approved. quality as directed.

(A) Copper Metal (ii) 50mm dia.

Providing and fixing ball cock of approved. quality as directed.

(B) Abonite (i) 25mm dia.

Providing and fixing ball cock of approved. quality as directed.

(B) Abonite (ii) 50mm dia.

336 11.00 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. Each 958.17

337 22.00 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. Each 101.91

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc. complete. [A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by

344 500.00 Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or Rmt 72.65

shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by

345 500.00 Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or Rmt 91.84

shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by

346 500.00 Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or Rmt 119.15

shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by

347 500.00 Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or Rmt 148.12

shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by

348 500.00 Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or Rmt 195.67

shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with

349 350.00 rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm Rmt 831.22

length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with

350 420.00 rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm Rmt 835.15

length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the

351 33.00 following nominal diameter of self cleansing design with C.I scread down or hinged grating including the each 558.36

cost of cutting and making good the walls.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following

352 33.00 nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of each 547.22

cutting and making good the walls.

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement Mortar in proportion

353 90.00 1:1 Selt glazed stoneware pipes including testing of pipes and joints complete. Rmt 211.57

(A) 100mm dia. (more than 10 ton)

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement Mortar in proportion

354 90.00 1:1 Selt glazed stoneware pipes including testing of pipes and joints complete. Rmt 305.13

(B) 150mm dia. (more than 10 ton)

Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following internal diameters with necessary formwork and

curing complete.

(A) 100 mm dia. (112 mm Avg. bed thickness)

Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following internal diameters with necessary formwork and

curing complete.

(B) 150mm dia. (166mm Avg. bed thickness)

Providing and laying lime concrete 1:2:4 (1-Lime putty :2-Fine samd : 4-Graded brick aggregates 40mm

nominal size) bedding for stoneware pipes of following internal diameters with necessary formwork and

curing complete.

(B) 150mm dia. 450 mm width (166mm Avg. bed thickness)

Extra over item 24.1 for providing salt Glazed stoneware fittings.(i) Bends of required degree (any

redious) of following nominal diameters. (A) 100mm dia. (more than 10 ton)

Extra over item 24.1 for providing salt Glazed stoneware fittings.(i) Bends of required degree (any

redious) of following nominal diameters.(B) 150mm dia. (upto 10 ton)

Extra over item 24.1 for providing salt Glazed stoneware fittings.(i) Bends of required degree (any

redious) of following nominal diameters.(B) 150mm dia. (more than 10 ton)

Extra over item 24.1 for providing salt Glazed stoneware fittings.(ii) Taper bend of required degree of

following internal diameters.(A) 100mm x 150mm (more than 10 ton)

Extra over item 24.1 for providing salt Glazed stoneware fittings. (iii) Single Junction of required angle

362 11.00 of following internal diametrs. Each 67.82

(A) 100mm. (more than 10 ton)

Extra over item 24.1 for providing salt Glazed stoneware fittings. (iii) Single Junction of required angle

363 11.00 of following internal diametrs. Each 120.42

(B) 150mm. (more than 10 ton)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and laying jointing and pointing with stiff mixture of Cement Mortar 1:1 (1-Cement : 1-Fine

364 11.00 sand) 150 mm internal diameter salt glazed stoneware half round channels. (more than 10 ton) Rmt 180.95

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover

365 17.00 with frame of 300 mm x 300 mm size (inside) with standard weight. Each 1,292.19

(i) Square mouth traps. (A) 100 mm x 100 mm size P type. (more than 10 ton)

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover

366 17.00 with frame of 300 mm x 300 mm size (inside) with standard weight. Each 1,246.92

(i) Square mouth traps.(B) 150 mm x 100 mm size P or R type

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including

testing of joints complete.

(B) 150mm (more than 10 ton)

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including

testing of joints complete.

(C) 250mm (more than 10 ton)

Constructing Manhole with R.C.C. top slab in 1 : 2 : 4 mix (1-cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete 1 : 3 : 6 mix (1-cement : 3-coarse sand : 6-Brick bats

40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1 : 5 (1-Cement : 5-coarse sand)

finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1-

Cement : 2-Coarse sand : 4-stone aggregate 20mm nominal size) finished smooth complete including

369 80.00 curing and festing (i) Inside size 900 mm x 1200 mm and 1.5M. deep including C.I. cover with frame size Each 11,029.97

560 mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.) (A) With 230 mm thick walls of brick msonry using brick having crushing strength

not less than 35Kg./Sq.cm. in Cement Mortar 1 : 5 (1- Cement : 5-Coarse sand)

(1) A-type depth 0.90 Metre for 150 mm diameter sewer.

Constructing Manhole with R.C.C. top slab in 1 : 2 : 4 mix (1-cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete 1 : 3 : 6 mix (1-cement : 3- coarse sand : 6-Brick bats

40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1 : 5 (1-Cement : 5-coarse sand)

finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1-

Cement : 2-Coarse sand : 4-stone aggregate 20mm nominal size) finished smooth complete including

370 54.00 curing and festing (i) Inside size 900 mm x 1200 mm and 1.5M. deep including C.I. cover with frame size Each 19,330.46

560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.) (A) With 230mm thick walls of brick msonry using brick having crushing strength

not less than 35Kg. / Sq.cm. in Cement Mortar 1 : 5 (1- Cement : 5-Coarse sand)

(2) B-type depth 1.50 Metre for 150 mm diameter sewer.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Constructing Manhole with R.C.C. top slab in 1 : 2 : 4 mix (1-cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete 1 : 3 : 6 mix (1-cement : 3- coarse sand : 6-Brick bats

40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1 : 5 (1-Cement : 5-coarse sand)

finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1-

Cement : 2-Coarse sand : 4-stone aggregate 20mm nominal size) finished smooth complete including

371 12.00 curing and festing (i) Inside size 900 mm x 1200 mm and 1.5M. deep including C.I. cover with frame size Each 23,441.74

560 mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.) (A) With 230mm thick walls of brick msonry using brick having crushing strength

not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement : 5-Coarse sand)

(3) C-type depth 2.25 Metre for 150 mm diameter sewer.

(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. /

372 41.00 Sq.cm. in Cement Mortar 1 : 5 (1-Cement : 5-Coarse sand) Each 30,252.27

(4) D-type depth 3.15 Metre for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over item

(I) for depth from 0.9M to 1.5M.

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of

Anti-corrosive paint etc. complete.

Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard pattern) te

weight of cover to be not less 4.53 Kg.) (more than 10 ton)

Providing and erecting at the site of work steel ventilating column of 150m internal diameter and

Metre High from G.L. to bottom of top grill including C.I. grill and base plate bolts and nuts etc. and

excavation in foundation of size 120 cm. x 120 cm. x 165 cm. and filling the pit with first layer of cement

concrete 1:3:6 mix (1-cement : 3-coarse sand : 6-graded stone aggregate 20mm nominal size) of 120 cm. x

376 6.00 120 cm. x 90 cm. and remaining pit with B.B.C. 1 : 3 : 6 mix (1-cement : 3-coarse sand : 6-Brickbats Each 44,680.99

40+50mm size) and providing fillet in Cement concrete 1 : 2 : 4 mix (1-cement : 2- coarse sand : 4-graded

stone aggregate 20mm. nominal size) at G.L. and 3 coats of silver paint etc. complete. (more than 10 ton)

Constructing Brick masonry road gully chamber 500 mm x 450 mm x 600 mm including 500 mm x

mm C.I. horizontal grating wih frame complete. (more than 10 ton)

Constructing Brick masonry road gully chamber 450 mm x 450 mm x 775 mm with vertical gating

Constructing brick masonry road gully chamber 1100 mm x 775 mm including 500 mm x 450 mm (C.I.

horizontal grating with frame and vertical grating complete.) (more than 10 ton)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks

having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm

x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover

Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

380 26.00 aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 Each 2,932.93

finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.

(i) Inside dimensions 455 mm x 610 mm and 450mm deep for single pipe line. (more than 10 ton)

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks

having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm

x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover

Kg.) and Wt. of frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

381 26.00 aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 Each 3,660.76

finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.

(ii) Inside dimensions 500 mm x 700 mm and 450 mm deep for pipe line with one or two inlets. (more

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks

having croshing strength not less than 35Kg. Cm2 in C.M. 1 : 5 C.I. cover with frame (Light duty) 455mm

x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover

Kg.) and Wt. of frame 15Kg. (R.C.C. top slabe with 1:2:4 mix (1-cement : 2- coarse sand : 4-graded stone

382 26.00 aggregate 20mm size) foundation concrete 1 : 5 : 10 inside plaster 15mm thick with cement mortar 1 : 3 Each 7,180.44

finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.

(iii) Inside dimensions 600mm x 850mm and 450 mm deep for pipe lines with three or more inlets.

(more than 10 ton)

Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick

383 26.00 masonry chamber. Each 242.39

(i) for 455 mm x 610 mm size.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick

384 26.00 masonry chamber. Each 264.86

(ii) for 500 mm x 700 mm size.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick

385 26.00 masonry chamber. Each 325.59

(iii) for 600 mm x 850 mm size.

(A) Providing sock pit of 2.00 Cum. Volume including excavating and filling brickbats with dry masonry

386 7.00 work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 Each 1,348.26

with finishing curing etc. complete as directed. (more than 10 ton)

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry

387 7.00 work at top for 45cm. height including covering the top with stone including providing vatas in C.M. Each 3,372.19

1:3 with finishing curing etc. complete as directed. (more than 10 ton)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful

389 1300.00 materials and disposing off the excavated stuff upto 50 Meter lead. Cu.mt 129.81

(A) Loose or soft soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers

390 2550.00 not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering etc. complete Cu.mt 130.39

as directed by EIC

RAIN WATER PERCOLATION:-

Boring/drillingborewellofrequireddiaforcasing/strainerpipe,bysuitable method prescribed in IS: 2800 (part

I), including collecting samples from different strata, preparing and submitting strata chart/ bore log,

391 495.00 including hire & running charges of all equipments, tools, plants & machineries required for the job, all R.mtr. 1,000.71

complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium

well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour

charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

200 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the

required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the

existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of

Engineer- in-charge

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in

required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/

medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of

Engineer- in-charge.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not

less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross

397 132.00 sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including Each 1,413.95

providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate

of useable water yield without sand content (beyond permissible limit), with required capacity air

compressor, running the compressor for required time till well is fully developed, measuring yield of well

by “V” notch method or any other approved method, measuring static level & draw down etc. by step

398 495.00 draw down method, collecting water samples & getting tested in approved laboratory, Hour 1,095.90

including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools

& accessories etc., all as per requirement

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well

housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS:

2800 (part I), including necessary bolts & nuts of required size complete. 200 mm dia

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of 200 mm dia

Providing, laying and jointing in true line and level 75 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with

402 285.00 rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm Rmt 527.90

length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

Suppying, installing, testing and commissioing of centrifugal end suction / monoblock pumps with c.i.

casing, Bronze impeller, SS Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm

speed and shall be supplied with all accessories viz., base plate, coupling, motor, starter panel, cabling up

403 9.00 to panel, earthing,suction, delevery & header pipes & valves etc., complete. (Garden & irrigation water Job 1,34,999.73

pumps : To pump UG tank to Garden Feed Water Tank) (Grundfos, ITT Lowara, or Eq.Make) Capacity :

5 mtr3/hr.2 Nos. main Pumps (1 Working + 1 Stand by Set)

WATER COOLER ; Supply, installation, testing & commissioning of S.S. storage type water cooler with

inbuilt with on line U.V. fultration along with built all intercnnectio piping, supports and valve and other

electrical requirment ,along with inbuilt storage tank with nessesarry accessories, safety valve, air valve,

404 9.00 drain arrangement, all insturumentation, base frame, necessary electrification, etc. complete for Drinking Job 95,000.03

Water supply. (Voltas, Blu star, Power H2o Make) Capacity : 80 storage capacity. Complete as directed

by site eng. incharg.

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Constructing Grit/ Silt chamber in brick masonry with cement mortar 1:4, waterproof cement plastering

12mm thick for inside and outside using waterproofing compound, CC 1:4:8 bedding with 1:2 smooth

405 11.00 finishing inside with chamfering, RCC M-20 slab in M-20 using black trap, san and cement with 150mm Nos. 55,000.32

thick RCC slab and providing and fixing medium type FRP manhole cover and farm etc. comp.( Size

1500 x 1500 x up to 2.0mtr depth)

PUDDLE SLEEVES:-Providing & Installing of the G.I. heavy duty Puddle Sleeve in the UGT & OHT

water tanks , durring the construction of the RCC tanks. The pipe and flazes nut bolt material are as per

the IS recommondation must be follow. all works must properly finishing as per site eng. Incharge slab &

Beams where ever req. 200 mm pipe dia x 600mm length

Providing & Installing of the G.I. heavy duty Puddle Sleeve in the UGT & OHT water tanks , durring the

construction of the RCC tanks. The pipe and flazes nut bolt material are as per the IS recommondation

must be follow. all works must properly finishing as per site eng. Incharge slab & Beams where ever req.

,150 mm pipe dia x 600mm length

Providing & Installing of the G.I. heavy duty Puddle Sleeve in the UGT & OHT water tanks , durring the

construction of the RCC tanks. The pipe and flazes nut bolt material are as per the IS recommondation

must be follow. all works must properly finishing as per site eng. Incharge slab & Beams where ever req.

,100 mm pipe dia x 600mm length

Providing & Installing of the G.I. heavy duty Puddle Sleeve in the UGT & OHT water tanks , durring the

construction of the RCC tanks. The pipe and flazes nut bolt material are as per the IS recommondation

must be follow. all works must properly finishing as per site eng. Incharge slab & Beams where ever req.

,80 mm pipe dia x 600mm length

Providing & Installing of the G.I. heavy duty Puddle Sleeve in the UGT & OHT water tanks , durring the

construction of the RCC tanks. The pipe and flazes nut bolt material are as per the IS recommondation

must be follow. all works must properly finishing as per site eng. Incharge slab & Beams where ever req.

,50 mm pipe dia x 450mm length

Supply installation, testing, commissioning of Bore well submersible pump to be installed in the tube well

of required indicated capacity and head as per relevant IS for Bore water lifting with suitable submersible

vet type, water cooled, squirrel case motor conforming to IS 9283, working of 3-phase, 50Hz +/- 3%

VAT +/- 10%, AC supply 2900 RPM synchronous speed with 10mtr. copper conductor flat cable from

pump to starter panel with cables and termination ( all supports clamps pipe fittings mechanical seal,

bearing, bush, strainer, etc. comp., Casing C.I., S.S. CF8M impeller, bronze casing, wearing and bearing

411 6.00 bush, TC mechanical seal, S.S. bearing, S.S. shaft with sleeve, S.S. strainer, and M.S. morter along with Job 9,23,968.20

water guard, single phase preventor with all cables of appropriate size control and instrumentations,

switches, testing, and installation along with testing. The scope shall also include delivery isolation valve

& NRV with PVC piping (400 dia Drill well @200mm dia MS. heavy class pipe : BORE WELL) Assume

75 TO 100mtr depth) (10 TO 15 MTR CU. PER HR. OUT PUT FLOW RATE with potable water

quality) (8 TO 10HP PUMP.)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

SITC of Heavy duty PVC flexible pipe of 25mm dia with 15 meter length , the pipe shouble be included

Gunmetal hose nozzel at the termination point. For gaden manual irrigation purpose. As per the site eng.

incharge and as per the guide line to be execute.

(Pipe:- Ashirvad, Kissan, Supreme, valve RB, Zoloto, Audco or Eq. Make)

413 95.00 SITC of Spray Pop Up Sprinkler 3 to 5 Meter Radius of Hunter / Rain Bird / Toro make No. 1,818.00

SITC of Spray Pop Up Dripper / Bubller 1.5 to 3 Meter Radius of Hunter / Rain Bird / Toro make

415 95.00 SITC of Swing Joing 3/4" of Hunter / Rain Bird / Toro make No. 909.00

416 95.00 SITC of Swing Joint 1/2" of Hunter / Rain Bird / Toro make No. 606.00

417 95.00 SITC of PP Clamp Saddle 3/4" PN 16 of Astore / Cepex make No. 242.40

418 95.00 SITC of PP Clamp Saddle 1/2" PN 16 of Astore / Cepex make No. 242.40

419 32.00 SITC of Double Acting Air Release Valve 1" of ARI / AZUD / R.B. OR EQ. make Each 4,242.00

Supply and installation of open drip piping consits of 16mm dia drip lines of length 20m connected to

m long 37.5 MM HDPE lateral capped at the end per block, as per Engineer instruction. Including 16mm

drip lines , End drip caps fittings, Rubber drip fitings, Offtake connectors drip fittings, 50 MM Main

420 115.00 screen filter,Start connectors without rubber,Start connectors with rubber Each 252.50

(Jain, Dutron, Price, Kissan Make)

FIRE FIGHTING PUMPS:- Supply, installation, testing & commissioning of electric driven Hydrant &

Sprinkler Pump suitable for automatic operation consisting of the following:Horizontal end suction

centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump

Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump

with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and

coupling guard with the pump. Common bed plate of fabricated mild steel channel or cast iron type.

Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts,

washers as required. Suitable reinforced cement concrete pump foundation including cushy foot

mounting, foundation bolts, washers as required. The pump shall be of the following specifications:

Discharge - 2280 lpm, Head - 70 mtr No. of stage preferred - Single / Double Speed RPM - 2900 Material

of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease

Lubicated e) Seal & Make - Mechanical Type of pump - End suction HP :- 60HP (45 KW.)

Supply, installation, testing & commissioning of electric driven Jockey Pump suitable for automatic

operation consisting of the following: Horizontally mounted centrifugal end suction pump complete with

mechanical seal and including necessary arrangement for testing of pump.Squirrel cage induction motor

suitable for 4440 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of

2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the

422 1.00 pump. Common bed plate of fabricated mild steel channel or cast iron type. Suitable reinforced cement Set 1,04,337.04

concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The

pump shall be of the following specifications : Discharge - 180 lpm, Head - 70 m No. of stage preferred -

Multistage Speed RPM - 2900 Mover - Electric Motor Driven Material of construction a)

Impeller - Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated e) Seal

& Make - Mechanical Type of pump - End suction HP :- 7.0 HP (5 KW.)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Supply, installation, testing & commissioning of diesel engine Hydrant Pump suitable for automatic

operation consisting of the following: Horizontal split casing centrifugal pump complete with mechanical

seal and including necessary arrangement for testing of pump Water cooled Diesel Engine developing

suitable BHP at 1500 RPM for the Pump, common bed plate for mounting of engine and pump, RCC

foundation and vibration damping arrangement by Cushy Foot and engine panel provided by engine

manufacturer, connection to Engine Starting Panel as per item (4), sealed maintenance free batteries of

V, 88 AH. Rate shall include Exhaust pipe of required length with asbestos lagging, muffler, day oil tank

of 400 lts with first charge and manual oil pump set.Flexible coupling and coupling guard with the

Pump,Common bed plate of fabricated mild steel channel or cast iron type.Suitable reinforced cement

423 1.00 concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. Engine Set 6,18,185.65

panel Sealed maintenance free batteries of 24 V, 88 AH --2 Nos. (1 working + 1 standby) Exhaust pipe of

required length with asbestos lagging, muffler Day oil tank G.I.-pipe Metal) of 400 lts with first charge

and manual oil pump set and necessary piping and structural work to place tank at upper level from pump

in pump room, Discharge -2280 lpm, Head - 70 m No. of stage preferred - Single / Double Speed RPM -

1450 Mover - Diesel engine driven Material of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft

& Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated e) Seal & Make - Mechanical Type of pump -

(Make :- KBL / M & P / GROUNDFOS / KSB.)

Supply, installation, testing & commissioning of electric driven automatic fire booster Pump suitable for

automatic operation consisting of the following: Horizontal end suction centrifugal pump complete with

mechanical seal and including necessary arrangement for testing of pump. Squirrel cage induction motor

suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of

2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the

pump. Common bed plate of fabricated mild steel channel or cast iron type. Suitable reinforced cement

424 1.00 concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The Set 87,065.03

pump shall be of the following specifications: Discharge-450 lpm, Head - 35 m No. of stage preferred -

Single / Double Speed RPM - 2900 Material of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft

& Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated e) Seal & Make - Mechanical, Type of pump - End

suction f) H.P.- 7 HP ( 5 KW.)

( Make :- KBL / M & P / GROUNDFOS / KSB.)

Providing and fixing air vessel for fire pumps as per following specifications: Diameter - 250mm, Shell

thickness - 8mm, Dish ends - 10mm, Height - 1200mm Finishing - Two coats of Red enamel paint of first

grade over one coat of primer externally & two coats of epoxy coating inside Material of Construction -

425 1.00 M.S. Test Pressure - 15 Kg./sq.cm., drain arrangmenet with 25mm dia. dia gun metal wheel valve with Each 18,426.44

required accessories etc. comp.

(Make:- NewAge / SBJ / Sukan / Winco)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Fire Fighting Panel :- Fabrication, supply, Insallation testing & commissioning of Electrical control panel

of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised

with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank

treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper

strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc.

complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as

per CPWD specification with following in coming and Outgoings, suitable for operation on 415V,

phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : Including feeders earthing and

paint shade as per Fire norms and as per specifications.out going motor feeders to have start/stop on / off

/trip indication and current in all the phases. All out going terminals brought to cable alleys. This panel

should be painted in Red shade as per local Fire Officer's norms, if any. INCOMING 250A, 50kA 4 Pole

MCCB, Ics=100% Icu rating

Digital Voltmeter 0-500V with selector switch

Digital Ammeter (0-250 A) with selector swtich & CTs etc.LED type RYB phase indicating lamps, ON,

125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump

with overload protection, current sensing type single phase preventor complete with all acceessories and

internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF

63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload

protection, current sensing type single phase preventor complete with all acceessories and internal wiring

required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.

DIESEL ENGINE CONTROL

Control for diesel engine comprising -

427 0.00 Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push 0.00 -

buttons, start/stop in manual mode

Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication

Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter,

and 0- 20 A DC Ammeter

All standard relays and accessories for automatic operation of diesel engine

System Controller

Designing, Supply, Installation, Testing and commissioning of system controller to control operation of

main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification

consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per

(Make:- L & T, Siemens, Schinder, ABB)

Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium

428 50.00 Conductor 3 core x 70 sq.mm Metre 389.86

(Make:- KEW / FINOLEX / POLYCAB)

Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium

429 25.00 Conductor 3 core x 10 sq.mm Metre 154.53

(cable from pump room to terrace for booster pump)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium

430 25.00 Conductor 3 core x 16 sq.mm (cable for jockey pump) Metre 208.06

(Make:- KEW / FINOLEX / POLYCAB)

Providing and fixing in position cable end termination glands for above mentioned cables 3 core x

(Make:- JINDAL / HUMMEL / ATEX)

Providing and fixing in position cable end termination glands for above mentioned cables 3 core x

432 3.00 sq.mm (cable from Booster Pump to terrace Remort Panel) Nos. 285.83

(Make:- JINDAL / HUMMEL / ATEX)

Providing and fixing in position cable end termination glands for above mentioned cables 3 core x

433 2.00 sq.mm (cable for jockey pump) Nos. 208.06

(Make:- JINDAL / HUMMEL / ATEX)

Providing, installation, testing, & commissioning of Remote Panel for fire fighting terrace pump with

push buttons for manual operation (the remote panel shall be located at ground level) all complete.

(Make:- L & T / Siemens / Schinder / ABB)

Supplying, laying and connecting of following size 1.1 kV grade copper conductor armoured control cable

on wall or on existing cable tray with clamping, dressing or drawn in existing ducts all as required (For

remote panel for fire fighting terrace pump). 3 core x 6 sq.mm

(Make:- KEW / FINOLEX / POLYCAB )

Providing, installation, testing, & commissioning of pressure switches for Hydrant, Sprinkler, Standby

and Jockey pump including necessary wiring upto control panel & other materials.

(Make:- Indfoss, Switcher, donfos)

Providing and fixing fire retardent / extinguishing electrical insulated synthetic mat of 5mm thick ±10%

conforming to latest BIS doc no.-ET-02(5440) meeting requirements of IS 3043 / IS 5216 (Part I, II &

III), IS 8437 & IEC 479 suitable for all voltages not exceeding 3.3 KV AC supply and having minimum

437 5.00 width of 1000mm ± 20mm and including supply of required quantity of adhsive / compound and fixing Metre 1,765.48

the same at site as per site requirement.

(Make:- Vardhman / Armacell / Vidyut)

Fabricating and installing following size of perforated G.I.-pipe cable trays including horizontal and

vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from

438 20.00 the ceiling with M.S. suspenders including painting, etc., as required. 150 mm width x 50 mm depth x 1.6 Metre 363.60

(Make:- Elcon / Aeron / Sharda / Super Steel)

Providing & fixing 25 mm x 5 mm G.I.-pipe Strip in on surface or in recess for connections etc as

439 20.00 required. Metre 124.23

(Make:- Elcon / Aeron / Sharda / Super Steel)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing & fixing 25 mm x 5 mm G.I.-pipe Strip in 40 mm dia GI pipe from earth electrode as required.

440 15.00 (Make:- Elcon / Aeron / Sharda / Super Steel) Metre 51.51

SUCTION AND DELIVERY PIPES AND VALVES FOR FIRE FIGHTING PUMPS:- Providing and

fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire fighting pumps (IS.

1239 heavy duty) including all fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees,

flanges (flanges as per table E), etc. threaded or welded (all type) joints as per detailed specfications as

441 15.00 required, cutting holes and chases in brick or RCC walls or floors and making good complete alongwith Metre 292.90

painting G.I.-pipe pipe with coat of Red Oxide primer and two or more coats of synthetic enamel paint

of approved colour and quality to give an even shade including surface preparation. 15 mm nominal bore.

(Make:- TATA / JINDAL)

Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire

fighting pumps (IS. 1239 heavy duty) including all fittings like couplings, bends, elbows, offsets, blind

flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all type) joints as per

detailed specfications as required, cutting holes and chases in brick or RCC walls or floors and making

442 15.00 good complete alongwith painting G.I.-pipe pipe with coat of Red Oxide primer and two or more coats Metre 614.08

of synthetic enamel paint of approved colour and quality to give an even shade including surface

preparation. 25 mm nominal bore.

(Make:- TATA/ JINDAL)

Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire

fighting pumps (IS. 1239 heavy duty) including all fittings like couplings, bends, elbows, offsets, blind

flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all type) joints as per

detailed specfications as required, cutting holes and chases in brick or RCC walls or floors and making

443 20.00 good complete alongwith painting G.I.-pipe pipe with coat of Red Oxide primer and two or more coats Metre 1,348.35

of synthetic enamel paint of approved colour and quality to give an even shade including surface

preparation. 80 mm nominal bore.

(Make:- TATA/ JINDAL)

Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire

fighting pumps (IS. 1239 heavy duty) including all fittings like couplings, bends, elbows, offsets, blind

flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all type) joints as per

detailed specfications as required, cutting holes and chases in brick or RCC walls or floors and making

444 20.00 good complete alongwith painting G.I.-pipe pipe with coat of Red Oxide primer and two or more coats Metre 1,735.18

of synthetic enamel paint of approved colour and quality to give an even shade including surface

preparation. 100 mm nominal bore.

(Make:- TATA/ JINDAL)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire

fighting pumps (IS. 1239 heavy duty) including all fittings like couplings, bends, elbows, offsets, blind

flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all type) joints as per

detailed specfications as required, cutting holes and chases in brick or RCC walls or floors and making

445 15.00 good complete alongwith painting G.I.-pipe pipe with coat of Red Oxide primer and two or more coats Metre 5,156.56

of synthetic enamel paint of approved colour and quality to give an even shade including surface

preparation. 150 mm nominal bore.

(Make:- TATA/ JINDAL)

Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery headers / pipes for fire

fighting pumps (IS. 1239 heavy duty) including all fittings like couplings, bends, elbows, offsets, blind

flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all type) joints as per

detailed specfications as required, cutting holes and chases in brick or RCC walls or floors and making

446 1.00 good complete alongwith painting G.I.-pipe pipe with coat of Red Oxide primer and two or more coats Metre 5,517.63

of synthetic enamel paint of approved colour and quality to give an even shade including surface

preparation. 200 mm nominal bore (6.0 thick min.).

(Make:- TATA/ JINDAL)

Providing and fixing cast iron wafer type Butterfly valve of the following size complete with bolts, nuts,

447 3.00 washers and neoprene gaskets as per specifications. 80 mm nominal bore. Nos. 5,031.82

(Make:- Audco, Kartaar, Zoloto)

Providing and fixing cast iron wafer type Butterfly valve of the following size complete with bolts, nuts,

448 10.00 washers and neoprene gaskets as per specifications. 100 mm nominal bore. Nos. 6,733.67

(Make:- Audco, Kartaar, Zoloto)

Providing and fixing cast iron wafer type Butterfly valve of the following size complete with bolts, nuts,

449 2.00 washers and neoprene gaskets as per specifications. 150 mm nominal bore. Nos. 9,049.60

(Make:- Audco, Kartaar, Zoloto)

Providing and fixing cast iron wafer type Butterfly valve of the following size complete with bolts, nuts,

450 1.00 washers and neoprene gaskets as per specifications. 200 mm nominal bore. Nos. 15,359.07

(Make:- Audco, Kartaar, Zoloto)

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to

451 2.00 IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : 100 mm nominal bore Nos. 11,160.50

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to

452 1.00 IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : 80 mm nominal bore (Make:- Nos. 7,767.91

Audco, Kartaar, Zoloto)

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to

IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : 150 mm nominal bore.

(Make:- Audco, Kartaar, Zoloto)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to

IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : 200 mm nominal bore.

(Make:- Audco, Kartaar, Zoloto)

Providing and fixing reinforced Neoprene flexible pipe connectors with all accessories on all pumps

455 1.00 delivery.Suitable for 20 Kg/cm2 80mm Each 4,692.46

(Make:- Elaflex, V.H. Polymer, Corirubber)

Providing and fixing reinforced Neoprene flexible pipe connectors with all accessories on all pumps

456 1.00 delivery.Suitable for 20 Kg/cm2 150mm Each 6,451.88

(Make:- Elaflex, V.H. Polymer, Corirubber)

Providing and fixing of nickel plated brass / nonferrous alloy fullyway ball valve (minimum working

457 2.00 pressure of 20 bar) with operating handle of approved make. 25 mm nominal bore NO. 1,173.62

(Make:- Audco, Kartaar, Zoloto)

Providing and fixing of nickel plated brass / nonferrous alloy fullyway ball valve (minimum working

458 3.00 pressure of 20 bar) with operating handle of approved make.15 mm nominal bore (Make:- Audco, NO. 645.39

Kartaar, Zoloto)

FIRE HYDRANT SYSTEM (External & Internal) (All Fire Fighting Hardware Should be ISI Mark) :-

Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. Pipe conforming to IS

3589/IS 1239 for pipes upto 150 mm dia. including forged threaded / socked (weldable) i.e. tees, bends,

elbows, unions, reducers, draining arrangement, flange joints, rubber insertion, nuts & bolts etc. as

required including fixing of pipework on walls, slabs etc. with M. S. supports (duly painted), adjustible

459 20.00 hangers. Note: Joints for pipes and fitttings upto 50 mm diameter shall be threaded joints using Teflon Meter 614.08

Tape or equivalent bonding tape on the threads. Joints for pipe and fittings above 50 mm diameter shall be

welded joints.Above ground pipe-with a coat of red oxide primer and two or more coats of synthetic

enamel paint of approved colour and Quality to give an even shade including surface preparation. :-

(Make:- TATA/ JINDAL)

Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. Pipe conforming to IS

3589/IS 1239 for pipes upto 150 mm dia. including forged threaded/socked(weldable) i.e. tees, bends,

elbows, unions, reducers, draining arrangement, flange joints, rubber insertion, nuts & bolts etc. as

required including fixing of pipework on walls, slabs etc. with M. S. supports (duly painted), adjustible

hangers. Note: Joints for pipes and fitttings upto 50 mm diameter shall be threaded joints using Teflon

460 25.00 Tape or equivalent bonding tape on the threads. Joints for pipe and fittings above 50 mm diameter shall be Meter 1,348.35

welded joints.Above ground pipe -with a coat of red oxide primer and two or more coats of synthetic

enamel paint of approved colour and Quality to give an even shade including surface preparation.:-

(Make:- TATA/ JINDAL)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. Pipe conforming to IS

3589/IS 1239 for pipes upto 150 mm dia. including forged threaded/socked(weldable) i.e. tees, bends,

elbows, unions, reducers, draining arrangement, flange joints, rubber insertion, nuts & bolts etc. as

required including fixing of pipework on walls, slabs etc. with M. S. supports (duly painted), adjustible

hangers. Note: Joints for pipes and fitttings upto 50 mm diameter shall be threaded joints using Teflon

461 25.00 Tape or equivalent bonding tape on the threads. Joints for pipe and fittings above 50 mm diameter shall be Meter 1,735.18

welded joints.Above ground pipe -with a coat of red oxide primer and two or more coats of synthetic

enamel paint of approved colour and Quality to give an even shade including surface preparation.:-

(Make:- TATA/ JINDAL)

Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. Pipe conforming to IS

3589/IS 1239 for pipes upto 150 mm dia. including forged threaded/socked(weldable) i.e. tees, bends,

elbows, unions, reducers, draining arrangement, flange joints, rubber insertion, nuts & bolts etc. as

required including fixing of pipework on walls, slabs etc. with M. S. supports (duly painted), adjustible

hangers. Note: Joints for pipes and fitttings upto 50 mm diameter shall be threaded joints using Teflon

462 35.00 Tape or equivalent bonding tape on the threads. Joints for pipe and fittings above 50 mm diameter shall be Meter 2,398.75

welded joints.Above ground pipe-with a coat of red oxide primer and two or more coats of synthetic

enamel paint of approved colour and Quality to give an even shade including surface preparation. :-

(Make:- TATA/ JINDAL)

Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 including all

GI/MS fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per

table E), etc. threaded or welded (all type ) joints as per detailed specfications as required, cutting holes

and chases in brick or RCC walls or floors and making good complete with one coat of 4 mm thick

'PYPKOTE' or COATEK anti rust pipe protection including approved primer & surface preparation of

463 30.00 pipes as per manufacturers specifications and lap of 25 mm to make an impermeable layer on G.I. Pipes in Meter 1,348.35

trenches or underground pipes below soil all complete.Under ground pipe-with a coat of red oxide primer

and two or more coats of synthetic enamel paint of approved colour and Quality to give an even shade

including surface preparation. 80 mm dia. (UNDERGROUND)

(Make:- TATA/ JINDAL)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 including all

GI/MS fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per

table E), etc. threaded or welded (all type ) joints as per detailed specfications as required, cutting holes

and chases in brick or RCC walls or floors and making good complete with one coat of 4 mm thick

'PYPKOTE' or COATEK anti rust pipe protection including approved primer & surface preparation of

464 50.00 pipes as per manufacturers specifications and lap of 25 mm to make an impermeable layer on G.I. Pipes in Meter 1,735.18

trenches or underground pipes below soil all complete.Under ground pipe-with a coat of red oxide primer

and two or more coats of synthetic enamel paint of approved colour and Quality to give an even shade

including surface preparation. 100 mm dia. (UNDERGROUND)

(Make:- TATA/ JINDAL)

Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 including all

GI/MS fittings like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges as per

table E), etc. threaded or welded (all type) joints as per detailed specfications as required, cutting holes

and chases in brick or RCC walls or floors and making good complete with one coat of 4 mm thick

'PYPKOTE' or COATEK anti rust pipe protection including approved primer & surface preparation of

465 20.00 pipes as per manufacturers specifications and lap of 25 mm to make an impermeable layer on G.I. Pipes in Meter 2,398.75

trenches or underground pipes below soil all complete.Under ground pipe :- 150 mm dia.

(UNDERGROUND) with a coat of red oxide primer and two or more coats of synthetic enamel paint of

approved colour and Quality to give an even shade including surface preparation.

(Make:- TATA/ JINDAL)

Providing and fixing S.S landing valve conforming to IS-5290 with 63 mm dia instantaneous female

coupling on the outlet with S.S. orifice flange 6 mm thick as required to maintain 3.5 Kg/sq.cm., blank

466 3.00 cap and chain, necessary companion flanges (as per table "E") nuts, bolts, washer and gasket complete as Each 6,200.39

per specification. (ISI marked) Single outlet.

(Make:- NEWAGE / SBJ / SUKAN / WINCO / PRIYANKA)

Providing and fixing first aid fire hose reel drum wall mounting, swinging type fitted with 20mm dia.

30.0 m long high pressure hose to I.S.5132 with 25 mm outlet gunmetal nozzle with shut off valve (I.S.

884-1969). Name of Manufacturer should be embossed on the drum.

(Make:- NEWAGE / SBJ / SUKAN / WINCO / PRIYANKA )

Providing and fixing 63 mm dia 15m long EPDM lined fabric lined hose including SS male and female

instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all

468 3.00 respects. Hose shall conform to IS 636 Type-II and coupling to IS 903 -1975 (ISI marked) Each 4,492.48

(Make:- NEWAGE / SBJ / SUKAN / WINCO / PRIYANKA)

Providing and fixing standard short size SS branch pipe with gunmetal nozzle 20 mm dia outlet with

469 3.00 standard instantaneoustype 63 mm dia coupling. (conform to IS-903). Each 1,678.62

(Make:- NEWAGE / SBJ / SUKAN / WINCO / PRIYANKA)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing standard fireman's axe (tested for 20000 Volts) with heavy insulated rubber handle.

470 3.00 (ISI marked) Each 1,114.03

(Make:- NEWAGE / SBJ / SUKAN/ WINCO / PRIYANKA)

Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia.

(Make:- Audco , Leader , Sant, & Zoloto)

Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed female ends

472 3.00 tested to 20 Kg/ cm2 of approved quality as specified 20 mm dia. Each 1,114.03

(Make:- Audco , Leader, Sant, & Zoloto)

Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed female ends

473 3.00 tested to 20 Kg/ cm2 of approved quality as specified. 25 mm dia. Each 1,466.52

(Make:- Audco , Leader , Sant, & Zoloto)

Providing and fixing door with frame for all internal fire hydrants fabricated from 16 SWG Alumunim of

size 750 x 1200 x 2100 mm double door including 2 nos allen key lock for locking along with padlock

arrangement & fully glazed with 4 mm thick float glass approved by local Fire Authority, stove enameled

fire red finish with "fire hose" written on front suitable to house 15 mm long four length of canvas hose

474 2.00 with couplings,one no of branch pipe, one fire mans axe and two numbers of portable extinguishers, first Each 13,490.57

aid fire hose and supports for hoses, branch pipes, Axe and hose reel. as per approved design including

necessary fixing arrangement for hoses & axe and branch pipe. FOR INTERNAL.

(Make:- NEWAGE / SBJ / SUKAN / WINCO / PRIYANKA)

Providing and fixing dial type pressure gauge with isolation cock and chrome coated copper pipe at

475 3.00 hydrant station. Dial diameter 100 mm calebration 0-15 kg/sq.cm. Each 1,173.62

(Make:- HGURU / FIEBG / BELL / WARREE)

Providing and fixing cast iron wafer type Butterfly valve -PN-1.6-of the following size complete with

476 5.00 bolts, nuts, washers and neoprene gaskets as per specifications. 80 mm dia. Each 5,031.82

(Make:- Audco, Kartaar, Zoloto)

Providing and fixing cast iron wafer type Butterfly valve-pn-1.6- of the following size complete with

477 1.00 bolts, nuts, washers and neoprene gaskets as per specifications. 150 mm dia. Each 9,049.60

(Make:- Audco, Kartaar, Zoloto)

Providing and fixing cast iron dual plate wafer type non return valves. 150 mm dia.

478 1.00 (Make:- Audco, Kartaar, Zoloto) Each 17,963.86

Providing and fixing gunmetal fire brigade inlet head as per IS:904 Specification tested for 20 Kg/cm2

with 63 mm dia instantaneous type inlet and 150mm dia. flanged outlet with built-in check valve for fire

479 1.00 brigade connection to under ground tanks and fire risers including campanion flanges as pertable " E" No. 6,809.42

including nuts, bolts & washers etc. Four way

(Make:- NEWAGE / SBJ / SUKAN / WINCO / PRIYANKA)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing gunmetal fire brigade inlet head as per IS:904 Specification tested for 20 Kg/cm2

with 63 mm dia instantaneous type inlet and 150mm dia. flanged outlet with built-in check valve for fire

480 1.00 brigade connection to under ground tanks and fire risers including campanion flanges as pertable " E" No. 14,113.74

including nuts, bolts & washers etc. Two way

(Make:- NEWAGE / SBJ / SUKAN / WINCO / PRIYANKA)

Providing and fixing suction coupling for fire brigade drawl of water from tank with 150 mm dia GI

481 1.00 (Medium) pipe and foot valve. Each 26,395.34

(Make:- NEWAGE / SBJ / SUKAN / WINCO / PRIYANKA)

Providing, fixing ,testing and commissioning external (yard) hydrant "STAND-POST" type conforming to

IS:908-1975 and comprising of stand post for single outlet of hot diped class ' C' G.I.-pipe Pipe of

mm dia at the with instantaneous spring lock type Stainless steel female coupling of 63 mm dia for

482 3.00 connecting to hose pipe, single headed SS valves conforming to type A of IS: 5290-1977, GI tee tapping Each 6,200.39

from underground mains, flange riser and any other accessories etc. as per specification complete as

(Make:- NEWAGE / SBJ / SUKAN/ WINCO / PRIYANKA)

Providing and fixing fire hose cabinet fabricated from 16 gauge M.S.sheet with locking arrangement and

hanging arrangement for accessories painted "Fire Red" with Stove enameled paint "Fire Hose" written

on front including suitable supports to place 900 mm above ground level properly anchored,

483 4.00 approximately size 800 x 600 x 250 mm deep (to house two lengths of canvas hose with couplings, branch Each 5,064.14

pipe with nozzle for external hydrants) FOR EXTERNAL.

(Make:- NEWAGE / SBJ / SUKAN/ WINCO / PRIYANKA)

SPRINKLER SYSTEM :- Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS

1239 complete with GI / MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges as per

table 'E' etc. including cutting and making good the walls complete.Pipes upto 50 mm dia threaded joint

with holdtite, 65 mm dia and above should be welded joint (all type).with one coat of red oxide primer

484 35.00 and two or more coats of synthetic enamel paint of approved colour to give an even shade including Meter 614.08

surface preparations. :- 25 mm dia

(Make:- TATA/ JINDAL)

Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI /

MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including

cutting and making good the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia

485 15.00 and above should be welded joint (all type).with one coat of red oxide primer and two or more coats of Meter 685.79

synthetic enamel paint of approved colour to give an even shade including surface preparations. :- 32 mm

(Make:- TATA/ JINDAL)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI /

MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including

cutting and making good the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia

486 15.00 and above should be welded joint (all type).with one coat of red oxide primer and two or more coats of Meter 839.31

synthetic enamel paint of approved colour to give an even shade including surface preparations. :- 40 mm

(Make:- TATA/ JINDAL)

Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI /

MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including

cutting and making good the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia

487 15.00 and above should be welded joint (all type).with one coat of red oxide primer and two or more coats of Meter 936.27

synthetic enamel paint of approved colour to give an even shade including surface preparations. :- 50 mm

(Make:- TATA/ JINDAL)

Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI /

MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including

cutting and making good the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia

488 15.00 and above should be welded joint (all type).with one coat of red oxide primer and two or more coats of Meter 1,170.59

synthetic enamel paint of approved colour to give an even shade including surface preparations. :- 65 mm

(Make:- TATA/ JINDAL)

Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI /

MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including

cutting and making good the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia

489 15.00 and above should be welded joint (all type).with one coat of red oxide primer and two or more coats of Meter 1,348.35

synthetic enamel paint of approved colour to give an even shade including surface preparations. :- 80 mm

(Make:- TATA/ JINDAL)

Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI /

MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including

cutting and making good the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia

490 15.00 and above should be welded joint (all type).with one coat of red oxide primer and two or more coats of Meter 1,735.18

synthetic enamel paint of approved colour to give an even shade including surface preparations. :-

(Make:- TATA/ JINDAL)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1239 complete with GI /

MS fittings like couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including

cutting and making good the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm dia

491 1.00 and above should be welded joint (all type).with one coat of red oxide primer and two or more coats of Meter 2,398.75

synthetic enamel paint of approved colour to give an even shade including surface preparations. :-

(Make:- TATA/ JINDAL)

Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set to operate at specified

temperature pendent / upright / side wall as per instruction and fixing with loctite. Pendent Type 68C

(Make :- H.D. FIRE / TYCO / VIKING)

Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set to operate at specified

temperature pendent / upright / side wall as per instruction and fixing with loctite. Side Wall Type 68C

( Make :- H.D. FIRE / TYCO / VIKING)

Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set to operate at specified

temperature pendent / upright / side wall as per instruction and fixing with loctite. Upright Type 68C

(Make :- H.D. FIRE / TYCO / VIKING)

Rossete Plate:-Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia

in white finish UL Listed or FM approved complete as required.

(Make :- H.D. FIRE / TYCO / VIKING)

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of

PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female

496 10.00 thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as Nos 1,686.70

required 1200mm.

(Make:- SBJ/ Newage/ Pneucons)

Providing & fixing 25mm dia. gunmetal inspecting & testing assembly with ball valve (3 nos.), gunmetal

497 1.00 sight glass, by pass valve & connected to drain line. Each 3,636.00

(Make:- Audco , Leader , Sant, & Zoloto)

Providing and fixing brass ball valve full bore type with plastic coated lever approved quality, tested to

498 1.00 20 Kg.cm.sq. 40 mm dia. Each 4,105.65

(Make:- Audco, Leader, Sant, & Zoloto)

Providing and fixing brass ball valve full bore type with plastic coated lever approved quality, tested to

499 1.00 20 Kg.cm.sq. 50 mm dia. Each 4,458.14

(Make:- Audco, Leader, Sant, & Zoloto )

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing cast iron wafer type Butterfly valve-PN-1.6- of the following size complete with

500 1.00 bolts, nuts, washers and neoprene gaskets as per specifications. :- 100 mm nominal bore Each 6,733.67

(Make:- Audco , Leader , Sant, & Zoloto)

Providing and fixing cast iron wafer type Butterfly valve -PN-1.6-of the following size complete with

501 1.00 bolts, nuts, washers and neoprene gaskets as per specifications. :- 65 mm nominal bore Each 4,345.02

(Make:- Audco , Leader , Sant, & Zoloto)

Providing and fixing electricaly operated flow indicating switches model System Sensor in sprinkler

branch line on each floor with necessary junction box installed in accessible place (Wiring from switches

to panel and stair case pressurisation not included) :- 100 mm dia

(Make:- DANFOSS / Honeywell / FORBES MARSHALL / SWITZER)

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial

503 1.00 diameter 100 mm celebration 0-15 / sq.cm. Each 1,173.62

(Make:- H GURU / FIEBG/ BELL / WARREE)

Providing and fixing 25 mm dia single acting air release valve with screwed inlet.

(Make:- Audco, Kartaar, Zoloto)

Providing and fixing cast iron dual plate wafer type non return valves. :- 150 mm dia.

505 1.00 (Make:- Audco, Kartaar, Zoloto) Each 17,963.86

Providing and fixing cast iron dual plate wafer type non return valves.:- 100 mm dia.

506 1.00 (Make:- Audco, Kartaar, Zoloto) Each 11,160.50

Providing, Installation, testing and commissioning of Control Valve inclusive of: - 150 mm dia butterfly

Valve, Alarm Valve with Water Motor Gong, Pressure gauge and other miscellaneous Valves and fittings

(Make:- NEWAGE / SBJ / SUKAN / WINCO / HD FIRE)

Fire Resistant Door Double Leaf Hinge Type (2 Hour Fire Rated) 1.00 mm thick GI Sheet cladded 40mm

thick shutter complete with GI frame (Single Ribet – Frame Profile 100 x 57mm) made from 1.20mm

thick GI Sheet & Fixing arrangements AS PER BS 476 PART- 20 & 22 & IS: 3614 Part - II for Integrity,

Stability.Door Size: 2000mm (W) x 2100mm (H) Including below Accessories S.S. Ball Bearing Hinges-

508 2.00 6 Nos Vision Panel with Fire Glass of Size: 200 x 300mm - 2 Nos Heavy Duty Door Closer - 2 Nos Heavy No 25,138.90

Duty Door Closer - 2 Nos Panic Exit Device for Double Leaf Door - 1 No. External Trim Bar (Panic

(JC-Fire Door/ Metaflex Doors India PVT ltd / Navair / Promat)

HAND APPLIANCES :- Providing and fixing ABC type fire extinguishers consisting of welded MS

cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge

tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to ISI

509 29.00 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Each 5,279.27

Capacity 6.0 kg. I.S.I. Marked.

(Make:- KANEX / CEASE FIRE / SAFEX)

Item Item Description Tender Total Amount

Item Item Description Tender Total Amount

Total Qty. Unit

No. Rate According

Providing and fixing Trolley type foam fire extinguishers cap. 50 liters. 50 litres capacity

(Make:- KANEX / CEASE FIRE / SAFEX)

Providing and fixing in position Co2 gas type fire extinguishers of 4.5 kg. capacity each.

(Make:- KANEX / CEASE FIRE / SAFEX)

Providing and fixing Trolley type Co2 gas fire extinguishers cap. 9 liters will be provided for transformer

(Make:- KANEX / CEASE FIRE / SAFEX)

Providing and keeping in position standard sand buckets filled with clean sand and painted red from

513 26.00 outside at various places. Nos. 935.26

(Make:- KANEX / CEASE FIRE / SAFEX)

Providian’s Escape Sigane:- Photoluminescent rigid plastic, 2mm thickness, printed on high quality

glass paint with UV resistance, 5 year warranty, material used-non radioactive, non-phophorous, non toxic

and lead free. Available in different types & sizes, time after removing the light source (in minutes):-

minutes, luminescent intensity (milicandelas*per square meter-mcd/sqm) : 30 mcd/sqm. Luminescent

514 26.00 intensity greater than 0.32 mcd/sqm, period of light decay* (in minutes) : 3100 Nos. 2,545.20

(1) “Fire Exits” (Size 365 x 119 x 84 mm or nearest)

(Make : Honeywell, Cease Fire, Prolite, Glowster)

(2) Fire exit signs of standard size (Size 450 x 200 x 84 mm or nearest) (photoluminous type. (glowing in

dark type) Providing and fixing portable fire extinguishers of approved make ISI marked of following

Capacity at the places shown on Drawing & mentioned in CFO letter.

(Make : Honeywell, Cease Fire, Prolite, Glowster)