CERTAIN REPAIRS TO VARIOUS BUILDINGS OF JCOs/OR MD ACCN AND OTM ACCN OF MES, MINOR UNITS UNDER STN HQ VADODARA AND UNITS NEAR TARSALI GATE INCLUDING INTERNAL ELECTRIFICATION AT LANCER LINE

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each

-Ditto- as per item No 1 above but area n.exc. 1.5 Sqm each

M&L 35mm thick 2nd class hard wood (Factory made) plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS 1003 (Part-I) kiln seasoned and chemically pressured treated and fitted to chowkats all as specified.

M&L 35mm thick 2nd calss hard wood (factory made) glazed and skeleton shutters, open rebated and prerpared to receive glass, gauge, etc edges of trimming plain chamfered or rounded fitted with cut and metered beads for securing/ gauge etc sizes of members of shutters as specified in SSR Part-I Section 8.20 (a) and all as specified.

M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strick plate etc complete all as specified.

M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strick plate etc complete all as specified.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheets, reinforced with MS square tube, supplying and fixing in opening as per specification and drawiing. The door frame shall be fixed to the wall using 75/100mm long MS screws complete.

Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat rounded plain colour PVC :C: channel having a PVC sheet strip & 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert to top rail & bottom rail. Paneling of plain colour sheet to be fitted in the MS frame welded/sealed to athe satiles & rails with suitbale PVC sheet beadding and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawings.

S&F stainlees steel butt hinges 100mm medium weight

S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and staples.

S&F aluminium alloy handle 150 mm cast type anodised all as specified.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

M&L for preparation of newly wooden surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of newly steel surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples or wooden beading complete all as specified and directed.

Hacking out old broken glass (any thickness, quality or description) from wooden frame/metal frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed

S & F steel windows or ventilators of glazed and wiremesh shutters with side hung shutter including box type hinges with steel handle, tower bolt and steel peg stay complete with dovetailed or welded (Note :- the combination of glazed and wire mesh shutters shall be measured as 'one' unit for the purpose of payement.

S&F in repairs 20 mm dia anodised aluminium tubular curtains rod complete all as specified and directed.

S&F in repair aluminium anodised brackets for curtain rod complete all as specified and directed.

M & L for preparation of old painted wooden and wood based surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and as directed.

Demolition of brick work built in cement or cement lime mortor complete.

Demolition of cement concrete (Unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level).

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundation filling and mass concrete .

Material & labour brick work with fly ash bricks built in CM 1:6 with sub class B, brick & straigh or curved on plain exeeding 6m mean radius complete all as specified.

Rendering 10mm thick on brick and concrete surfaces finiesh even and smooth without using extra cement in CM (1:4)

M & L Extra for formig fair finish drain channel 30 cm inner girth

M&L cement concrete (1:2:4), type B-1 using 20mm araded stone aggregate as in coping.

S&F in repair stop valves/angle cocks, cast copper alloy with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule.

Supply & fix in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

Supply & fix in repair 25mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

S&F in repair Chromium plated long body fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

S & F repairs vitrous china wash down water closet pan (pedestal pettern) white including white plastic water closet seat and back with flat bottum and cover mild steel chromium plated are aluminium anodised hinging device (excluding flaushing cistern and flush pipe) but encluding fixing bolt and necessary connection with existing pipes completed all sepecified and directed.

S&F in repair EWC anti microbial seat cover hygenic type for padestral pattern complete all as specified and directed.

S&F in repairs of CP Jet Spray Hygenic spray set with 15mm dia tube acrylic type all as specified and directed

S&F in repair white vitreous china suqatting pan ''Orissa'' pattern size 580 x 440mm white with ''P'' or ''S'' trap and integral foot rest including connection to traps and to flusing pipe, anti syphonage pipe etc complete and making good to floor complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping,clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg of cement per Sqm complete.

M & L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.11sqm and n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed out in white or coloured cement to match, laid over and including screed bed 15mm thick in cement mortor (1:6) complete all as specified

M & L for glazed ceramic coloured wall tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including 10mm thick rending in CM : 1:4 complete all as specified and directed.

S&F for Vitreous China wash down water closet pan (pedestal pattern) white with fixing bolts and trap, including connection to drain or outgoing pipes and to flush pipes complete all as specified and as directed.

S&F in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.

S&F in repair 125 mm dia, chromium plated swivel type shower rose with 195 mm long chromium plated shower arm and wall flange suitable for fixing 15mm bore iron pipe all as specified and directed.

Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

Taking up or down GI tubing 20 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

Taking up or down GI tubing 25mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

S&F for galvanised steel water tubing medium grade with all necessary fitting; and fixed to wall /ceiling or in floors of size:-

15mm dia

20mm dia

25mm dia

S & F in repair concealed stop cock fencing type with sheet flange cast copper alloy, scrwed down high precure with round operating knob for 15 mm bore pipe bore and fixed complete all as specified and directed.

Supply & fix in repair vitreous china wash basin white flat back type of size 550x400mm including cutting for and pinning in ends of brackets and 32mm dia chromium plated waste coupling and down pipe complete all as specified and directed by GE/Engineer-in-charge.

S&F in repairs 32 mm dia flexible waste pipe for wash basin and kitchen sink, urinal complete all as specified and directed.

S&F in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-20mm thick Size not less than 550 x 550 mm over base laid and jointed in grey cement slurry mixed with pigment to match the shade of the as in skiritings, dados, steps etc including rubbing and polishing complete and all as specified and directed.

All as per item No 55 but as in skirtig/dado, steps of stairs etc and all as specified and directed

Demolition of stone slab of any description or thickness in floor, aprons etc.Laid bedded and pointed in any mortor complete.

Complete removal of existing unservicable roof treatmen incl taiking down plaster, padding of any description and any position, cleaning, flushing out junctions of parapet wall washing down with water etc to prepare surface for new WPT including removing off rubbish at out side MD land. and all as specified and directed

Material & labour for 50mm average thick PCC padding in Cement concrete (1:2:4) type B0 (Using 12.5mm graded stone agg) mixed with liquid water proofing admixture as per manufacturer's instructions finished even and smooth without using extra cement for laying of WPT WPC measured seperately) and all as specified and directed.

Material & labour cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30Ltr per Sqm followed by evenly a track coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3.0 kg per Sqm 3mm thick of unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions

Supply only liquid water proofing admixture Make-Pidilite

Disconnecting existing tanks, setting aside for lowering if required for repairs, cleaning etc hoisting and refixing in position of capacity exc 250 ltr but n exc 500 ltr complete all as specified and directed.

Supply hoisting and fix 500 ltrs rotational moulded polythene water storage water tanks twin layered construction ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I duly ISI Marked, 20mm GI light grade over flow pipe approx length 1.5m long, 20mm GI medium grade pipe for wash out approx length 2.00 m duly plugged at one end shall be provided including dismantling the existing tank complete all as specified.

Supply & Fix in repair 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete all as specified and directed.

Taking down cement plaster, on brick or stone wall, concrete surface, etc including racking out joints, hacking for key, scrubbing down with water all as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surface of ceiling in cement mortar 1:4, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement morter 1:6 on brick or concrete surface of walls,surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over priming coat of chalk whiting complete all as specified and as directed

M&L for preparation of new surfaces of any description and applying two coats of cement base paint on wall over a coat of alkaline resitant primer complete all as specified and as directed.

M& L preparing newly plastered surface of ceiling and applying three coat of white wash complete all as specified and as directed.

M&L 40mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone agg)as in floors , surface finished even and smooth with out using extra cement.

S&F for vitreous china urinal bowel type (Back or corner wall type) complete including providing and fixing plugs. Bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screw pointing around urinal back in cement fixing automatic flushing cistern with brocket. Flush pipe grating and for discharge pipe complete all as specified and as directed..

S&F as in repairs CP wall mixer three in one system for mixing hot & cold water screwed down for iron pipe 15 mm bore and fixed complete all as directed

S&F in repair toilet paper holder of chromium plated fixed to wall with chromium plated (CP) Brass screw complete all as directed

S&F CP centre hole wash basin mixer three in one for 15 mm bore complete all as specified and directed

M&L for 16-18mm thick green marble in one piece machine cut as in cooking plate form,steps,window cills and like set and jointed in grey cement slurry and pointed in coloured cement (1:2) using marble dust with admixture of pigment to make with marble shade, laid over and including 15mm thick screed bed in cement mortor 1:4 complete all as specified.

Rounding to edges of stone slabs such as steps cooking platefrom and other similar situations complete all as specified

M&L 25 mm thick cement concrete(1:2:4) type B-0 (using 12.5 mm gradded crushed stone agg ) surface finished even and fair to receive top finishes as leveling course complete all as specified.

S&F in repairs sinks made of stainless steel 1mm thick with plugs, washers, waste cupling and PVC wastes pipe including bedding in Cement Mortar to dwarf wall or including fixing cantilever brackets &connecting unions to pipe overall size 495 mmx 420 mm bowl size 410 mm x 330 mm 160 mm all as specified.

Supply & fix in repairs, stainless steel Plate Rack of best quality, made out of 0.80 mm thick stainless steel sheet, of size 125cmx125cmx25cm with all internal fittings of approved make complete all as specified and directed.

M&L for cement concrete 75mm thick (1:3:6) type C-1 (20mm graded crushed stone agg ) surface finished even and smooth without using extra cement as in plinth etc.complete all as specified .

M&L 100 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone agg ) as in sub base complete all as specified.

M&L for machine vibrated coloured chequred cement concrete tiles 30cm x 30cm x 25 mm thick set and jointed in neat cement slurry and pointed with grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortor 1:4 complete all as specified

Providing and fixing factory made 18(+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc complete all as per directions of enginer in Charge, Manufacturers's speciifcations

Supply & fix aluminium anodized hasp and staple of size 100mm long, safety type complete all as specified & directed.

Supply & fix magnet ball catcher of suitable size for cupboard shutters all as per sample kept in GE’s office complete all as specified & directed.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc all as directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

M & L for point wiring complete with multistranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade, conforming IS 694 & color code including PVC casing caping. the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multistranded copper conductor 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.

One light point controlled by one one/way switch.

One Fan point controlled by one one/way switch.

One 3 pin 5 Amps socket outlet on same board with other switch.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size.

One light point controlled by two way switches

One bell point controlled by one way switches

All as per item No. 90 above but using 4 Sqmm PVC insulated, unsheathed cable for one 3 pin socket outlet 15 Amps on independent board

M & L for sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC conduit 25 mm dia and accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 6 Sqmm earth wire, PVC insulated & unsheathed all as directed. Note: Three runs of copper conductor and one run of PVC conduit shall be measured as on unit.

M & L for sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC conduit 20 mm dia and accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed all as directed. Note: Three runs of copper conductor and one run of PVC conduit shall be measured as on unit.

M & L for point wiring complete with multistranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade, conforming IS 694 & color code in conduit system of wiring, drawn in including PVC surface conduit not less than 20 mm dia concealed, including cutting chases, finising of slote by means of cement mortor making good to the existing surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multistranded copper conductor 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.

One light point controlled by one one/way switch.

One Fan point controlled by one one/way switch.

One 3 pin 5 Amps socket outlet on same board with other switch.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size.

One light point controlled by two way switches

One bell point controlled by one way switches

All as per item No. 94 above but using 4 Sqmm PVC insulated, unsheathed cable for one 3 pin socket outlet 15 Amps on independent board

Taking down U/S FTL and Supply and fixing of 4' 18W LED Tube With Batten with system lumen output of 1800 lumens. System Efficacy should be > 115lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Surge Protecton of 3KV.All the Photometrical & Electrical parametrs must be supported by LM79-08 test report from NABL Accridiated LAB OR UL, R9 Value > 0. Lamp starting time is not more than 1 Sec. The LED tube light conforms to applicable IS.Make of LED From Philips/Crompton/ Wipro. .Similar to Crompton LDSL 18-CDL with Master TLED 18W 1800 Lumens

S/F switch piano flush type single pole one way 5 Amp 240 Volts. Make : Anchor/SSK/CONA

S/F switch piano flush type single pole two way 5 Amp 240 Volts. Make Anchor/SSK/CONA or its equivalent

S/F switch socket combination 2 in 1, 3 pin, 5 Amps flush type 240 Volt. Make Anchor/SSK/CONA or its equivalent.

S/F switch socket combination 3 pin 5 and 15 Amp 2 in one flush with inbuilt indicating lamp. Make Anchor/SSK/CONA or its equivalent.

S & F Bell switch including Bell ding dong type, one way, 240 volts, AC, ISI marked.

S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked.

M&L for opening covers of ceiling fan, remove the burnt winding, cleaning the slots and rewinding the fan with supper enammeled copper wire of same wire gauge as per IS-13730, warnishing after winding, drying, replacing unserviceable fan bearings No 6201/6202 for 1200.1400mm sweep, greasing, soldering the copper terminal of winding with single core copper multistraded wire of 0.5 sqmm and re-assembling fan, replace of fan capacitor 1.7/2.5mfd and making connection with fan capacitor and connector block,Including Painting fan and blade with super enamelled paint of two coats and marking of MES No, transoporting back after repair, assembling the blades and hanging the fan in its own position to existing fan clamp and down rod with necessary Nut, bolt and washer and testing for smooth functioning after complete repair all as ditrected at site. Note : Quoted rate deems to inclusive of rate of fan capacitor, fan bearing and transporatation charges.

M&L for opening covers of Exhaust fan 300mm, remove the burnt winding, cleaning the slots and rewinding the fan with supper enammeled copper wire of same wire gauge as per IS-13730, warnishing after winding, drying, replacing unserviceable fan bush/bearings, greasing, replace of armeture coil with complete shaft, soldering the copper terminal of winding with single core copper multistraded wire of 0.5 sqmm and re-assembling fan, replace of fan capacitor 1.7/2.5mfd and making connection with fan capacitor and connector block,Including Painting fan and blade with super enamelled paint of two coats and marking of MES No, transoporting back after repair, assembling the blades and fixing the fan in its own position to existing fan clamp with necessary Nut, bolt and washer and testing for smooth functioning after complete repair all as ditrected at site. Note : 1. Quoted rate deems to inclusive of rate of fan capacitor, fan bearing and transporatation charges.

S&F in repair energy efficient 5 star rated ceiling fan 1200mm sweep, single phase 230/240 volts AC and connecting up to including provn of porcilin connector and flexible three core copper conductor of size 23/0.0076 from ceiling rose or connector to ceiling fan and testing on completion, complete all as directed by engr-in-charge. Make : Bajaj/CG/Usha/Orient

S/F in repair TPN DBs Vertical type 4 way with provision for FP as incomer and SP as outgoing all as directed. CAT Part No. IP 43-IK 09 with metal door of CAT No. 6077 50 of Make Legrand or its equivalent in Havells/C&S.

S/F in repair sheet metal enclosure for single pole and neutral 08 way 240 voilts, 100 Amp rated bus bar. IP 43 - IK -09 CAT No. 6077 11 of Make Legrand or its equivalent in Shgnider/C&S/ABB.

S & F TPN 63 Amps 35 KA rupturing capacity of Make Legrand/C&S/Havells or its equivalent

S & F SPN 32 Amps 10 KA rupturing capacity. Make Legrand/C&S/Havells or its equivalent

MCB SP 5 to 30 Amp 240 Volts

Supply and fixing connecting resistance type fan regulator A/C 240 Volts.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 32 Amps. Make Legrand/C&S/Havells or its equivalent

M&L earthing complete with GI steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I & testing on completion including necessary excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,medium grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed.

S & F wall security light LED type complete with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete all as directed and specified by Engr-In-Charge. CAT Part No.LSTO-25-CDL 25watt of Make CG or its equivalent in Phillips/Wipro.

S & F lamp holder for CFL PVC/Polycarbonatetype with cord grip including Supply and fixing of of 9 W LED Bulb with system lumen output of 600 lumens. System Efficacy should be > 85lm/ W. TheLamp Should have Cool Daylight Color temp of 6500K . Lamp should be supplied with E27 Holder. Similar to Philips Ace Saver. Make : Cona/Anchor.

Supply and Fixing electronic ballast suitable for tubelight of 40 Wattt. Make : Phillips or its equivalent in bajaj/CG

Supply and fix AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, basis current 10 A, Max continuous current 600% of basis current conforming to IS-13779 and relevant IEC standards with inbuilt Low Power Radio Frequency (LPRF) communication facility in Cyantech Mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. Similar to model No EM 101+ of make L&T or in equivalent model of make Capital/Cyantech.

Supply and fix 4' feet LED 1X20W LED tube rod on replacing existing 36/40watt fitting at side as per user requirement, with system lumen output of minimum 2000 lumens suitable for G13 holder with single side connection. The Luninaire should have cool daylight color temp 6500K, CRI >80, PF >0.95, Life class of 40,000 burning hrs with 70% lumen maintenance, Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection > 2 KV. LED to mounted on Rod and not directly on the surface of the tube. All the photometrical & electrical parameters must be supported by LM 79-08 test report from NABL accredited LAB or UL switching cycle of 50,000 times. The LED tube light conforms to applicable IS 10322/EN 60598, similar to CG model No : LT8-20-865-2 or equivalent Make of Philips /Havells/Wipro.

Taking down and refixing storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection from main and repairing the water heater storage type capacity 25/35 ltrs of any type and make, checking the serviceablity of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly completet (considered as one unit) and installing and testing the same as per the direction of Engineer-In-Charge.(Supply only for parts against unserviceable parts shall be measured and paid for separately under relavent items given below)

Supply only for replacement of heating elements, 1.5 KW 230 volts Make -THEETA/BAJAJ.

Supply & fix for replacement of thermostat immersion point type 15 Amps, 230/250 volts/AC ISI marked Make - THEETA/BAJAJ.

Supply and fix in repair storage, vertical type water heater including heating element, all accessories, fixing arrangement etc complete of capacity 25 ltrs all as directed by Engieer In charge of Make Havells or equivalent in CG. Note : Old materials shall be deposited to MES store yard.

Badri Electricals

Aditya Construction