Automation of 10 MLD WTP at Paralakhemundi

AUTOMATION OF INTAKE WELL PLC panel for Intake Design manufacture supply installation testing and commissioning of indoor type PLC panel of size approx. 1000 mm X 700 mm X 1500mm LBH fabricated out of min. 2 mm thick CRCA sheet powder coated to Siemens gray color.The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration.The PLC shall be programmed with IEC 61131 standards for control monitoring and communication of equipments and instruments at Raw water Pumphouse.PLC shall have Ethernet port and protocal for Modbus TCP communication with following IO.DI 16 num DO 16 num AI 8 num AO 4 num. 10 inch color TFT HMI complete with programming shall be provided to interact with PLC. The panel shall include all the accessories not limited to following to achieve purpose of smooth and trouble free operation of pump house.MCB 10A DP 1 num MCB 4A DP 4 num 24 VDC Power Supply 10A 1 num Push Buttons 7 num Selector Switch 2 num Control Contactor 2 num Annunciator with 6 Windows NO to NC TypeElectronic Hooter 1 num Control Transformer 1 num Emergency PB 1 num Panel Cooling Fan 1 numPanel Light with Door Switch 1 num Control Indication Lamp 5 num Wiring TB etc 1 lot Hardware 1 lot and all Complete Works as per specification and directions of Site Engineer Engineer in Charge

Windows based PC with latest configuration and OS complete with necessory office and antivirus softwares.PC configuration shall not be less than Intel i5 10th Gen CPU 16 GB Ram 128 GB SDD 500 GB HDD DVD RW Rs232 and Rs485 port 2 RJ45 ports Keyboard Optical Mouse 32 inch color TFT Monitor Latest Windows Pro OS Microsoft Office and Antivirus and Internet Sequrity software for 3 years license and completed as per Ingineering In Charge.

Supply Installation and commissioning of single phase 1KVA online UPS with pure sine wave and float cum boost charging with battery rack and maintenance free battery system for 1hour backup including cables power plug switch etc. all Complete Works.

Supply Installation of Control Desk 1 no. Table 1 no. and Chairs 2 nos. at SCADA room and completed as per Ingineering In Charge.

Supply Installation and commissioning of AC 1.5 Ton 5 star and complete as per Engineer In Charge.

Supply Installation Testing Intgeration and Commissioning of 43 LCD monitor at Conf. Room for display of total water system Online complete as per specification and directions of Site Engineer Engineer in Charge.

Designing Supplying Installing commissioning and testing of Ultrasonic level transmitter CE marked with following technical parameters Interfacing with PLC panel including mounting arrangement. Output 4 20 mA HART. Power supply 24V DC ext. Display 4 LED Range 0 10 mtr 20 mtr. Accuracy 0.25 percent of FullScale or better Enclosure IP 68 Mounting On PLC panel all complete work as per direction of Engineer in charge.

SupplyingInstallation and testing of 4G Dual Sim LTE Router with 1 X LAN 1 X WAN RS485 on board with one at a time usage WI FI 802.11 b g n 1 X Cellular Antenna 1 X WIFI Antenna Model SW245 RS485 and complete work as per direction of Engineer in charge

Providing installation testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass Over range protection 125 percent of maximum pressure Material of sensor and other wetted parts SS type 316 Housing material Die cast aluminum with linear scale and alland complete work as per direction of Engineer in chargeAll header and common header

Pressure Transmitter for raw and pure water pumping station Designing Supplying Installing commissioning and testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement. Output 4 20 mA HART Power supply 24V DC ext. Display 4 LED Accuracy 0.1 percent of full scale or better Enclosure IP 68 and complete work as per direction of Engineer in chargecommon Header