CONSTRUCTION OF HARD STANDING AND WASH ROOM NEAR GARUDA LOUNGE AND SPL REPAIR FOR PAINTING OF IRON FENCING MPR RADAR COMPLEX INCLUDING REPAIR REPLACEMENT OF WOODEN DOORS, IRON GATES, SHUTTERS WINDOWS AT 259 SU AT AF STATION BAREILLY

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out on soft/ loose soil complete all as specified and as directed.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded cushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 40mm thick DPC with PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) mixed with IWP @ 3% by weight of cement with and including applying evenly a coat of hot blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm and supply & laying polythene film, 50 micron thick, laid on a coat of bitumen primer @ 0.30 kg to 0.50 kg per sqm complete all as specified and as directed. Note:- Integral Water Proofing Compound shall be measured and paid seperately.

M&L for 10mm thick plastering in CM (1:6) on other than fair faces of brick wall or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for fly ash brick work with old size bricks, straight or curved on plan to any radius, half brick thick wall, built in cement mortar (1:4) complete all as specified and as directed.

M&L for 15mm thick cement plastering in CM (1:4) mixed with IWPC @ 3% by weight of cement on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as spd and directed. Note:- Integral Water Proofing Compound shall be measured and paid seperately.

M&L for non - skid concept coloured joint free ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, set in neat cement slurry and pointed in coloured cement to match with and including over 15mm thick screed bed or bedding layer of CM (1:4) with and including over 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) complete all as specified and as directed.

M&L for glazed ceramic colour tiles 7mm thick as in vertical surface of size (450 x 300)mm, jointed in neat cement slurry and pointed in white or colour cement with and including over 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.

S&F vitreous china wash down water closet pan (Pedestal pattern) white excluding flushing cistern and flush pipe including white plastic seat cover back closed pattern with flat bottom and mild steel chromium plated hinging device complete all as spedcified and as directed.

S&F 10 Ltr capacity PVC valveless, dual type, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including CI brackets complete all as specified and as directed.

S&F toilet paper holder of cast copper alloy chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F Vitreous China counter wash basin, oval shape, self rimming counter top of size (560x400x205)mm white, with and including waste pipe to be provided concealed including provn of CP bottle trap and bend, a pair of angle iron (40 x 40 x 6)mm bracket fixed in wall with PCC block 100mm x 100mm x 150mm (1:3:6) type C1 (using 20mm graded stone aggregates), with and including fixed on 20mm thick granite slab and rounding edges complete all as specified and as directed.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F Waste coupling of cast copper alloy CP 32mm size complete all as specified and directed.

S&F grating flat round, 1.6mm thick complete all as specified and directed. Make:- Prayag AISI-304 or equivalent.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth and complete all as specified and as directed.

S&F 15mm bore steel water tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

S&F 20mm bore steel water tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank three layered of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F 20mm bore stop valves, cast copper alloy, CP fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed.

S&F tubular towel rail, 20mm dia, brass chromium plated, D type, 60cm long between flanges complete all as specified and directed.

M&L for 75mm PVC pipe floor trap round shaped doom type, AISI-304 including jointing with solvent cement complete all as specified and as directed.

S&F 5.50mm thick looking mirror of size (600x450)mm of approved quality fixed to walls with suitable stainless steel brackets and screws complete all as specified and directed.

M&L 15mm bore bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm bore cast copper alloy CP health faucet complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Description all as per srl item no 31.00 here in before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed.

S&F vitreous china bowl urinal flat back, size of (465 x 355 x 265)mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and as directed.

Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, (horizontal or sloping), and similar work for fair finishing complete all as specified and as directed.

M&L for preperation of new surfaces of ceilings and applying three coats of white wash with and including over 5mm thik cement plaster of CM (1:4) on ceillings complete all as specified and as directed.

M&L for 20mm thick plastering on fair faces of concrete roof surface in CM (1:4) mixed with WPC @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed. Note:- Integral water proofing compound shall be measured and paid seperately.

Supply only Integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer in camouflage pattern complete all as specified and as directed. Note:- Colour scheme and design shall be as per existing wall.

S&F solid PVC door frame of size (50mm x 47mm) made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed

S&F factory made solid panel single side prelam sheet PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F PTMT hinges of dimension 100mm complete all as specified and as directed.

S&F aluminium handles, cast type, anodised of size 100mm complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of cast aluminium alloy etc complete all as specified and as directed.

S&F 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 20mm thick granite stone slab machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 20 mm thick screed bed or bedding layer of cement mortar (1:4) for laying floor finishes, chamfering/bullnosing of edges and grinding and polishing complete all as specified and as directed.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

M&L for hardcore of broken stone and boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in plinth protection and finished fair & even complete all as specified and as directed.

M&L for forming butt joints 10mm wide and 75mm deep as in plinth protection and filled with bituminous filler of 1 part of bitumen and 3 part of sand complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and as directed.

Removing excavated material to a distance exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with 8 to 10 ton power roller complete all as specified and as directed.

M&L for 200mm thick hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 10 cm thick each layer, watered and rolled with 8 to 12 ton power roller to a true surface to required gradient and camber complete all as specified and as directed.

M&L for 150 mm thick (compacted thickness) PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base of road complete all as specified and as directed.

M&L for 150mm thick (compacted thickness) PCC M-25 (design mix) (using 20mm graded crushed stone aggregate) as in pavement of road complete all as specified and as directed.

M&L for finishing the surface concrete by brooming withoout using extra cement while the concrete is green and complete all as specified and as directed.

M&L for forming 12 mm thick expansion joint, filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ grade 'A' for 250 mm thick concrete slab complete all as specified and as directed.

M&L for forming construction joint 10mm wide and 30mm deep by cutting with diamond cutter and filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for forming Contraction (Dummy) joint 65mmx10mm wide by cutting with diamond cutter and filled by sealing compound grade 'A' complete all as specified and as directed.

M&L for 150mm bore RCC pipe of class NP2 pipe with collars, laid and jointed in cement mortar (1:1), including 75mm thick concrete bed to pipe in PCC (1:3:6) type C2 (using 40mm graded stone aggregates) including necessary excavation, earth work, benching and haunching against the sides of pipes after they are laid on slope, jointed and tested complete all as specified and as directed.

M&L for on site LLDPE septic tank with upflow filter including media designed to carry sewage and sluge water, excavation in any type of soil, PCC (1:4:8) below foundation, vent shaft, connection, complete for 25 users complete all as specified and as directed.

M&L for construction of soakage well for 2.4m internal dia and 3.0m effective depth including necessary excavation and earth work in any type of soil, PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in foundation, brick work in cement mortar (1:4) in wall & honey combed brick wall, RCC M-25 (design mix) as in cover slab, including precast cover slab having 8mm dia TMT bar reinforced, PCC band and dwarf wall, form work to sides and soffits of slab and filling with brick bats loose filling complete all as per TD No. CELZ/TD/576 Sheet 1/2 & 2/2 and as directed.

S&F PVC (SWR) pipe of dia 110mm, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipe of dia 75 mm, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 110 mm bore dia PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S&F 110mm bore dia PVC (SWR) headrest bend of any radius complete all as specified and as directed.

S&F 75mm bore dia PVC (SWR) junction on single, (Single T) equal or unequal complete all as specified and as directed.

S&F 75mm bore dia PVC (SWR) bends of any radius with access door complete all as specified and as directed.

S&F 75 mm bore dia PVC (SWR) headrest bend of any radius complete all as specified and as directed.

S&F 75mm bore dia PVC (SWR) vent cowl complete all as specified and as directed.

M&L for providing precast cement concrete type (1:2:4) type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar (1:4) complete with joints to match complete all as specified and as directed.

M&L for 15mm thick cement plastering in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc. 1.5 sqm but n exc 4.0 sqm each complete all as specified and as directed.

Taking down shutters of any description area exc 2.0 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n exc 1.5 sqm each complete all as specified and as directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, etc complete all as specified and as directed.

M&L for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc. size of members as specified in SSR Pt-I, section 8 clause 8.24 (a) complete all as directed.

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for flat iron holdfast made out of flat iron 30mm x 5mm thick complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in bed block for fixing holdfast complete all as specified and as directed.

M&L for 15mm thick rendering with CM (1:6) on fair faces of brick wall or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering with CM (1:4) on other than fair faces of brick wall or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18m and fixed with tinned tacks or glavanised wire staples complete all as specified and directed.

S&F 4.8mm thick sheet glass, ordinary quality, glazing with oil putty/ wooden beads in squares not exc. 0.5 sq.m each pane complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for preparation of old surface of steel and iron of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for preparation of old concrete surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

S&F 300mm long mild steel, sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F 100mm long butt hinge cold rolled mild steel medium weight ISI marked complete all as specified and as directed.

S&F 150mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

S&F 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

S&F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified.

M&L for Point Wiring for one light or one fan point controlled by one way switch complete with 1.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including concealed non-metallic rigid PVC conduit medium grade with all fittings (ISI Marked) not less than 20 mm external dia but shall be increased as per actual site requirement accordance with clause no 19.125 of SSR part I fixed concealed / recessed in wall / ceiling etc with and including 1.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade as earth continuity wire including MS sunken pressed steel terminal boxes of suitable size, made of sheet 1.6mm thick with 3.0 mm thick bakelite sheet top cover for complete all as specified and as directed.

Description all as per srl item No. 103 here -in- before but for One 3 pin socket outlet, 5/6 amps, on independent board complete all as specified and as directed.

Description all as per srl item No. 103 here -in- before but for One 3 pin socket outlet, 5/6 amps, on same board complete all as specified and as directed.

M&L for Point Wiring complete for one 3 pin 15 or 16 Amp socket outlet on independent board with 2.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade drawn in and including concealed non-metallic rigid PVC conduit medium grade with all fittings (ISI Marked) not less than 20 mm external dia but shall be increased as per actual site requirement in accordance with clause no 19.125 of SSR part I fixed concealed / recessed in wall / ceiling etc with and including 2.5 Sqmm FR-LSH, PVC insulated unsheathed copper conductor single core multi stranded cable 650/1100 volts grade as earth continuity wire including MS sunken pressed steel terminal boxes of suitable size, made of sheet 1.6mm thick with 3.0 mm thick bakelite sheet top cover complete all as specified.

S&F switch piano flush type single pole one way 5/6 Amp complete all as specified and as directed.

S&F switch piano flush type single pole one way, 15/16 Amp complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5/6 Amp flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5/6 & 15/16 Amp flush type complete all as specified and directed.

S&F Wall/surface mounted type LED light fitting batten type complete with LED lamp 1x 20 - 24 watt (4 feet long), extruded aluminium heat sink provide for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable, including taking down of existing light fitting etc complete all as specified and as directed. Make : Make:- Philips Cat Part No BN 021C LED 20S PSU CW GR S2 / Havells Cat Part No : ENDURALINEARNEOBS20WLED865SPCWH or equivalent make of Wipro.

S&F Wall / surface mounted type LED light fitting batten type complete with and including LED lamp 10 Watt (2 feet long), poly carbonate body and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper conductor cable complete all as specified and as directed.

S&F Wall / surface mounted type LED light fitting batten type complete with and including LED lamp 05 Watt (1 feet long), poly carbonate body and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper conductor cable complete all as specified and as directed.

S&F LED Bldg Street light fitting 35 W, IP 65 made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP65 protection, roadway luminaire with high power LED as light source 1 x 35 Watt, LED 6000K, complete with all accessories internally pre-wired complete all as specified and as directed. Make :- Philips Cat Part No BRP 409 LED CW 036 MR FG S1 PSU GR , Wipro Cat Part No LR02 - 501 - XXX - 57 - XX or equivalent make of Havells.

S&F Street Light bracket made of light grade GI pipe 32 mm bore and 1.20 mtr long duly bent to shape including 2 Pairs of MS Clamps made out of 40mm x 5mm M.S. flat, nuts, bolts, washers etc complete all as specified and as directed. Make :- Tata / swastik/ Jindal/ prakash.

S&F Exhaust fan, heavy duty, AC single Phase, 230V of size 300mm sweep with blades, frame and louvers including cutting chases for fixing fan, connecting electrically using 3 Core 0.5 Sqmm PVC insulated FRLS flexible copper conductor cable overall sheathed all as required at site with connected accessories etc complete all as specified and as directed. Make :- Havells Model No Havells Ventil Air DB 300mm or Crompton Heavy Duty Industrial or Usha.

S&F ceiling rose, surface bakelite, (65 x 50)mm, three terminals complete all as specified and as directed.

S&F in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and as directed.

Supply and fixing MCB SP (single pole) 240 volts, 6 - 32 Amps, 50 Hz, 10 kA, ‘B’ curve complete all as specified and directed.

Supply and fixing MCB DP 240 volts, 32 Amps, 50 Hz, 10 kA, ‘B’ curve complete all as specified and directed.

S&F 1100 volts grade heavy duty two single core 4 Sqmm size (Nominal Area) PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 4 Sqmm size (Nominal size) stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and as directed. Note: - Two single core of 4.0 sqmm one single core of earth wire 4.0 sqmm and PVC conduit shall be measured and paid as one unit length.

Supply, fixing, installation and testing of storage type water heater (Geyser) 25 Ltrs capacity, BEE 5 star rated with steel body with glass lined inner tank and polycarbonate outer body including pressure valve & NRV, electric supply connection complete including grouting with nuts & bolts of 15mm dia 100 mm long for hanging the geysers, with and including PVC connection 15mm dia, 450mm long heavy duty suitable for hot & cold water connections complete including plastering and finishing of disturbed wall surfaces as per existing finish complete all as specified and as directed by Engr-in-charge. Make: AO Smith Model No AO Smith ELJ Series Storage Water Heater ELIV 25 Litre Vertical Type, Havells Model No Monza DX Vertical Type, Racold Model No Racold Platinum Plus Vertical Type.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with a single pole MCB 20 Amps complete in sheet metal enclosure complete all as specified and as directed. Make :- Legrand/ Siemens/ Schneider

M&L for Earthing complete with galvanized steel earth plate electrode (600x600)mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, 20mm dia GI pipe medum grade upto 1.5 mtr below GL for watering pipe, excavation and earth work, charcoal dust, common salt, PCC (1:3:6) type C-1 chamber with cover and RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia, PGI funnel and wire mesh complete all as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion complete all as directed by Engr-in-Charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 2 core complete with and including taking out old unserviceable existing cable complete all as specified and as directed. Note:- Excavation, earthwork and cable protection shall be measured and paid seperately.

M&L for dry sand cushioning for protection of under ground cables (8cm before laying the cable and 15cm after laying the cable in trenches) complete all as specified and directed. Note:- Only punned thickness shall be measured and paid.

M&L for well burnt sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, length of brick equal to width of brick complete all as specified and as directed.

Supply and laying 40mm bore light grade ISI marked GI tubing laid in trenches or inserting in horizontal boring for cable protection including fixing with MS Clamp, nut & bolts etc complete all as specified and as directed.

Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 20mm complete all as specified and as directed.

S&F 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make :- Zoloto, Leader, Kirloskar

S&F rotational moulded three layered polyethylene water storage tank of capacity 250 Litres (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I complete all as specified and as directed.

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm and fixed complete all as specified and directed. Make :- Polytuf, Prayag.

MOHINDER SINGH AND SONS

M/s M Aali construction co

M/S B. R. CONSTRUCTION

VINOD TRADING CORPORATION

M/s Agarwal Builders