Sabarimala Devaswom-MnM Festivals in 1195ME-Repairs and replacement of damaged electrical installations of various buildings at Pamba and Nilackal-Supply of electrical materials

Amount

Appendix-A- All materials should confirm to IS Specification or standards

6 A to 32 A ratings, SP MCB, “C” curve, 10 kA breaking capacity

40 A rating, 2 pole RCCB, 30mA

40 A rating, 4 pole RCCB, 30mA

63 A, 4 pole isolator

40 amps., 2 pole isolator

40 amps., 4 pole isolator

S.P. 5/6 amps,one way switch, piano type ISI marked

3 pin 5/6 amps socket outlet, piano type ISI marked

PVC Batten/ Angle Holder

1.5 sq mm ISI marked FRLS PVC insulated single core copper conductor cable

2.5 sq mm ISI marked FRLS PVC insulated single core copper conductor cable

4.00 sq mm ISI marked FRLS PVC insulated single core copper conductor cable

125 A, TPN, switch disconnector fuse unit (Panel mounted type) with ISI marked HRC fuses

Appendix-B- All materials should confirm to IS Specification or standards

2.5 mfd. Capacitor

40W fluoresent tube

6A 3pin plug top

16A 3pin plug top

1200 mm sweep- 5 star rated Ceiling fan, complete with 300mm down rod, canopies, shackles and blades and resistance type regulator working on 230/240V single phase A/C

32A/240V HRC fuse unit (Kit kat fuse)do.do with HRC fuse link

63A/440V HRC type Kit kat fuse

100A/440V HRC fuse unit (Kit kat fuse)do.do with HRC fuse link

HRC type din typefuse link 160A do.. do

32 A, 2 Way neutral links mounted on DMC/SMC base

63 A, 2 Way neutral links mounted on DMC/SMC base

100 A, 2 Way neutral links mounted on DMC/SMC base

48/0.20 sqmm three core ISI Marked FR LS PVC sheathed round copper conductor cable

1x20 W LED box type tube fittings. The fittings shall be made from CRCA MS sheet of minimum thickness 0.50 mm nominal thickness inside & outside (including LED Tubes).

adhesive pvc insulation tape

450 mm sweep, 1400 rpm Heavy Duty Exhaust fan working on 230 V A/C

200A, 4 pole On-Load Change Over Switches In Open Execution

Appendix-C- All materials should confirm to IS Specification or standards

Supplying and providing 1*36/40W copper ballast in the existing fitting as required(VPIT) (Bajaj/Crompton)

Supply and providing resistance type regulator for 1200mm sweep ceiling fan and giving connection as required

Supplying and 40W FT starter in the existing fitting as required(FSU-Bajaj)

Supplying GLS 60W clear bulb in the existing fitting as required

Supplying GLS 100W clear bulb in the existing fitting as required

Supply MH LAMP 250W TUBULAR

Supply 250W SV IGNATOR

Supply 33 MFD CAPACITOR

supply 250W MH CHOKE BJOS

Supply Aluminium Flat Wire 4MM SERVICE WIRE

Supply conveyance installation testing and commissioning of prewired Strip light fluresent made out of CRCA sheet of minimum thickness 0.50mm power coated/store enameled suitable for 1x36x40w FTL with open construction (VPIT) copper chock starter holder lamp holder etc duly wired up to for use on 240V single phase AC supply and fluresent lamp etc directly on wall or ceiling with TW round block neatly painted to suit the fittings and giving connection with required length of 16/0.20mm 3core copper conductor flex confirming to relevant ISS and giving connection etc as required

Supply LED BULB .5W HAPPY POWER 1Y

20A&10A Caption 5in 1 with Box

Appendix-D

Charges for watching and maintance of temporary lights and attending the electrical faulty round the clock as per the direction of the department officals from 16-11-2019 to 19-01-2020 Electricians 6nos/day for 65 days

P SREEKUMAR