Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.8 Cr
EMD Value
₹2.8 L
Closing Date
30 Nov 2026, 6:00 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer Panchayat R&B Division Amreli
Construction of Taluka Panchayat Office Building at Rajula, Dist.Amreli
368071
Tender Notice No.22/2026-27, Sr.No.21
Open
Civil Works - Buildings
Works
Amreli
8 documents required · 7 mandatory · 1 optional
₹3,600
Executive Engineer Panchayat R&B Division Amreli
₹2.8 L
21 Nov 2026
21 Nov 2026
21 Nov 2026
30 Nov 2026
21 Nov 2026
90 days
Name of Work :: Construction of Taluka Panchayat Office Building at Rajula, Dist : Amreli
Bill of Quantities (BOQ)
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[1] Excavation for foundation upto 1.5 m depth including sorting out 3824.10 Cum 149.68
and stacking of useful materials and disposing off the excavated
stuff upto 50 Meter lead.(B) Dense or Hard Soil
[2] Excavation for foundation for depth from 1.5 m to 3.0 m 65.90 Cum 256.12
including sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead. By use of
(A) Hard Murrum
[3] Brick work using common burnt Clay building bricks having 133.00 Cum 4284.12
crushing strength not less than 35 kg / sq.cm in foundation and
plinth in Cement mortar 1:6 (1 Cement : 6 fine sand) (A) Modular
[4] Providing and laying cement concrete 1:4:8 (1- Cement: 4-Coarse 77.50 Cum 2830.47
sand :8- crushed stone aggregate 40mm normalsize ) and curing
complete including cost of form work in (a) Foundation and
[5] Providing and laying controlled cement concrete M 250 for 91.20 Cum 4739.94
curing complete including the cost of formwork for reinforced
concrete work in (A) Foundations, Footing, Base of columns and
[6] Providing and laying controlled cement concrete M.250 exposed 39.70 Cum 10076.21
work with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in (B)
COLUMNS:(iii) Having cross-sectional area more than 0.12 Sq. M
and upto 0.18 Sq. M (Below plinth)
[7] Providing and laying controlled cement concrete M.200 exposed 31.50 Cum 9970.48
work with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in (B)
COLUMNS :(iii) Having cross-sectional area more than 0.12 Sq. M
and upto 0.18 Sq. M
[8] Providing and laying controlled cement concrete M.250 exposed 34.50 Cum 7987.68
work with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in (A)
BEAMS:(iii) Having cross-sectional area more than 0.12 Sq. M and
upto 0.18 Sq. M (Plinth Beam)
[9] Providing and laying controlled cement concrete M.250 exposed 2.70 Cum 9483.54
work with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in (A)
BEAMS:(iii) Having cross-sectional area more than 0.08 Sq. M and
upto 0.12 Sq. M (Plinth Beam)
[10] Providing and laying controlled cement concrete M.200 exposed 37.63 Cum 7881.95
work with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in (A)
BEAMS:(iii) Having cross-sectional area more than 0.12 Sq. M and
upto 0.18 Sq. M
[11] Providing and laying controlled cement concrete M.200 exposed 157.50 Cum 7713.35
work with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in Slabs up to
10 to 15 cm thickness.(GF Slab & Grade Slab)
[12] Providing and laying damp proof course 25mm thick cement 542.00 Sqm 306.64
concrete 1:2:4 (1-Cement : 2 coarse sand : 4 stone aggregate
mm nominal size) and curing complete.
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[13] Applying general insecticide pest control treatment to floors, 610.00 Sqm 37.23
cupboards etc including labour materials etc.complete. Using
Imidacloprid 30.5 SCas Per IS 6313 part-II( (0.075% concentration
by mass) is ecommended 10.5ml chemical diluted with 5 liters of
water application 0.5 litre chemical /Sqm of surface is
recommended as per I.S.
[14] Filling in plinth with sand under floors including watering ramming, 162.40 Cum 460.19
consolidating and dressing complete.
[15] Filling available excavated earth (excluding rock) in trenches. 500.00 Cum 129.28
plinth, sides of foundations etc. in layers not exceeding 20 cm. in
depth consolidating each disposited layer by ramming and
[16] Brick work using common burnt Clay building bricks having 272.50 Cum 4560.05
crushing strength not less than 35 kg / sq.cm in super structure
above plinth level up to floor two level in Cement mortar 1:6
(1 Cement : 6 fine sand) (A) Modular (Extra for Brick work in
superstructure above plinth level upto floor two level)
[17] Half brick masonary in common burnt Clay building bricks having 436.00 Sqm 701.88
crushing strength not less than 35 kg / sq.cm in in C.M 1:3 (1
Cement : 3 coarse sand) in with 2 nos. of 6 mm dia.mild steel
round bars after every three coarse embedded in cement mortar
in super structure above plinth level upto floor two level (A)
[18] Providing and fixing anodized aluminium section frame - weight 19.60 Sqm 6048.89
not less than 1.1 kg/Mt with wooden inserts for durable grip of
door hinges (frame size 38 mm x 63.5 mm) single 3.8 cm thick
shutter flush door solid core finished with 1 mm th. lamination on
both side with s.s. handle and other s.s. fixtures (double shutter
/single shutter) and fully panelled shutters including s.s. pivote
hinges handles with locking arrangement, etc. complete.
[19] Providing & Fixing extruded aluminium door having extruded 105.10 Sqm 2140.34
aluminium colour powder coated section frame main outdoor size
127 x 38.10 x 1.35 mm (@ Wt.1.384 Kg/mt), horizontal four track
member size 122.20 mm X 31.75 mm X 1.10 mm ( @ Wt.
Kg/mt),vertical member of size 122.20 mm X 31.75 mm X 1.50 mm
(@ Wt. 1.398 Kg/mt) with shutters of horizontal member size
mm X 18mm X 1.29 mm (no:19552 @ wtr. 0.456Kg/mt), vertical
member of size 40 mm X 18 mm X 1.29 mm (@ wt. of 0.456 Kg/mt/
8948, @ Wt.0.456 Kg/mt) with 5 mm thick transparent bronze
colour tinted float glass with powder coated aluminium fittings and
fixtures and transparent silicon sealant glass fixing to frame as per
details. etc complete.
[20] Providing and fixing FRP frame size 125x65 mm and 35 mm thick 27.30 Sqm 2019.98
FRP shutter with wood grain raised panneled design finish shutter
having extra reinforcement on sides & edges in Gel coat finish. The
core of the shutter & frame is to be filled up with injected fire
retarded grade polyurethene foam done in situ along with
embedded wooden pieces from stiffening & also for taking hinges
& fixtures. The whole FRP frame & shutter is to be water proof
weather proof, termite proof & resistance to mild acid/alkali. Rates
are to be inclusive of S.S hinges with necessary screws &
alluminium fixtures & fastenings.
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[21] Providing and fixing window having extruded aluminum Colour 202.00 Sqm 1591.88
Powder Coated section frame main outer size
[email protected]/mt,horizontal Three track
member size 92mm x 31.75mm x 1.30mm @Wt.1.07Kg/mt,
vertical member of size 92mmx31.75mmx1.50mm,@Wt.1.06Kg/mt
with sliding shutters of horizontal member size
[email protected] 0.456Kg/mt,vertical member of size
40mm x 18mm x 1.29mm @wt.of0.456Kg/mt with 5mm thick
transparen bronze colour tinted float glass with powder
coatedaluminum fittings and fixture sand transparent
siliconsealant glas fixing to frame as per details etc
[22] Providing and fixing standared extruded of alluminium section of 14.00 Sqmt 1175.56
size 63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour
Powder Coated alluminium frame for ventilation with 5 mm thick
frosted glass as details etc complete for Ventilation
[23] Providing and fixing standard extruded of alluminium section of 12.00 Sqmt 1833.30
size 63.50x38.10x1.95mm (@ Wt 1.094 Kg/Rmt) with colour
Powder Coated alluminium frame with 8 mm thick transparent
bronze colour tinted float glass as details etc complete for Fix
[24] Providing and fixing M.S. grills for window ventilator etc openings, 205.00 Sqmt 930.69
made of 16 mm size bright bars, framed in M.S. flat 40x4 mm size
at 15 cm c/c in vertical intervals, welding bright bars in frame
including cutting, transportation, primer & oil painting, fixing in
position etc. complete
[25] Providing and fixing M.S. grills for stair railing 1.1 mt total height, 10.00 Rmt 2490.86
balcony railing etc. of 12 mm size bright bars, framed in M.S. flat
50x 4 mm size at bottom & 50 mm Dia. G.I. Pipe at top with PVC
hand rail coverd, braced with bright bar design as per drawing at
30 cm c/c in vertical intervals, welding bright bars in frame
including cutting, transportation, primer & oil painting, fixing in
position etc. complete.
[26] Providing and laying ordinary C.C. M-200 (C.C. 1:1.5:3 - 1 cement, 26.40 Cum 8398.95
1.5 coarse snad, 3 graded stone agggregate of 20 mm nominal size)
and for R.C.C. lintels/sill bends including finishing smooth with
curing of formwork but excluding the cost of reinforcement for
above floor two level.
[27] Providing and laying ordinary C.C. M-200 (C.C. 1:1.5:3 - 1 cement, 8.20 Cum 6829.51
1.5 coarse sand, 3 graded stone agggregate of 20 mm nominal size)
and for reinforcement concrete chhajjas not exceeding 10 cm.
thickness upto floor two level incl. finishing the exposed surface
with C.M. 1:3 (1 cement, 3 fine sand) to give a smooth and ever
surface, cenetering, formwork and curing comp. Excl. the cost of
reinforcement above floor two level.
[28] Providing and laying ordinary C.C. M-200 (C.C. 1:1.5:3 - 1 cement, 5.10 Cum 13029.36
1.5 coarse snad, 3 graded stone agggregate of 20 mm nominal size)
and curing complete including the cost of formwork and excluding
the cost of reinforcement for reinforced concrete work for
horizontal and vertical R.C.C. fins.
[29] Providing and laying controlled cement concrete M-250 and curing 10.00 Cum 14089.95
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in staircase for all
floors incl. finishing the exposed work with cement mortar to give
smooth even surface
[30] Providing TMT Bar reinforcement for R.C.C.work including bending, 75956.00 Kg 76.56
binding and placing in position complete upto floor two level
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[31] Providing and laying Marbo Granite tiles 8 to 10 mm thick , 36'' x 79.00 Sqm 1484.61
36'' in flooring treads of steps and landing laid on a bed of 12mm
thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with
flush pointing in white cement.
[32] Providing and laying Granite slab 18 mm thick in jams & sills of 187.00 Sqm 2468.87
windows and pillars laid on 10mm thick cement mortar 1:3 (1
Cement - 3 Coarse sand) or lime mortar 1:1.5 laid and jointed with
grey cement slurry including rubbing and polishing complete.
[33] P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 535.10 Sqm 1204.21
(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on
new surface or fixing on existing flooring by adhesive material
including dismentaling of existing flooring and jointed with color
cement slurry including finised with flush pointing & cleaning the
surface etc. complete for light shade
[34] P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 59.00 Sqm 1290.11
(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on
new surface or fixing on existing flooring by adhesive material
including dismentaling of existing flooring and jointed with color
cement slurry including finised with flush pointing & cleaning the
surface etc. complete for DARK shade
[35] P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 308.00 Sqm 1397.83
(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on
new surface or fixing on existing flooring by adhesive material
including dismentaling of existing flooring and jointed with color
cement slurry including finised with flush pointing & cleaning the
surface etc. complete for antiskit
[36] Providing and layingCeramic tiles 6mm thick in skrting risers of 151.00 Sqm 975.14
steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-
coarse sand) and jointed with white cement slurry
[37] Providing and laying Ceramic tiles 6mm thick in flooring treads of 45.80 Sqm 944.91
steps and landing laid on a bed of 12mm thick cement mortar 1:3
(1-cement : 3-coarse sand ) finishing with flush pointing in white
[38] Providing and laying coloured glazed tiles of the size 300 mm x 200 237.80 Sqm 1417.37
mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps
and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse
sand) & jointed with white cement slurry.
[39] Providing 15mm thick cement plaster in single coat on Rough 2372.20 Sqm 246.82
(Similar)side of single or half brick walls for interior plastering upto
floor two level and finished even and smooth in (i) Cement mortar
1:3 (1-cement:3-sand) finishing with floting coat of neat cement
[40] Providing 10mm thick cement plaster in single coat on 1023.00 Sqm 225.02
brick/concrete walls for interior plastering upto floor two level and
finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-
sand) finishing with floting coat of neat cement slurry and
plastering on ceiling and sofits of stairs upto floor two level
[41] 20mm thick sand faced cement plaster on walls upto height 10 1015.30 Sqm 326.11
metres above ground level consisting of 12mm thick backing coat
of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of
C.M. 1:1 (1-cement : 1-sand) etc. complete.
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[42] Wall painting (two coats) with plastic emulsion paint of approved 2189.00 Sqm 119.50
brand and manufacture on undecorated wall surface to give an
even shade including throughly brushing the surface free from
mortar droppings and
other foreign matter and sand papered smooth including two coat
of Birla or Asian acrylic lappy (putty) & two coat of primer of
approved brand and manufature on new wall surface to give an
[43] Distempeing (Two coats) with oil bound washable distemper of 1300.00 Sqm 72.08
approved brand and manufacture and of required shade on wall
surfaces to give an even shade, over and including a priming coat
with alkali resistance primer of approved brand after thoroughly
brushing the surface and other foreign matter and also including
preparing the surface even and sand parpered smooth.
[44] Finishing wall with weather proof exterior emulsion paint on wall 977.00 Sqm 114.54
surface (two coats)to give an required shape even shade after
thoroughly brushing the surface to remove all dirt, and remains of
loose powdered materials etc complete.
[45] Providing and fixing alluminium wall pages nails 3 nos. alluminium 20.00 Nos 35.35
[46] Providing and fixing Gun metal check or non-return full way wheel 5.00 Nos 420.64
valve.(C) 25mm dia.
[47] Providing and fixing Gun metal check or non return fullway wheel 6.00 Nos 186.83
valve.(A) 15mm dia.
[48] Providing and fixing chromium plated brass half turn flush cock of 14.00 Nos 263.78
approved quality including fixing in pipe line etc. complete.(ii)
[49] Providing and fixing 600mm x 450mm bevelled edge mirrror of 16.00 Nos 833.74
superior glass mounted on 6mm thick A.C. sheet or plywood sheet
and fixing to wooden plugs with C.P. brass screws and washers.
[50] Providing and fixing C.P. brass towel rail complete with C.P. brass 18.00 Nos 603.20
brackets fixed to wooden plugs with C.P. brass screws.(B) 600mm x
[51] Providing and fixing screw down bib taps of following size.(B) Brass 36.00 Nos 186.83
chromium plated screws down Bib Tap. (i) 15mm dia.
[52] Providing and fixing water closet squatting Pan (Indian type W.C. 8.00 Nos 1394.93
Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to
be measured and paid for separately) (A) Vitreous China.(I) Long
pattern = White colour (Providing and fixing 100mm size P or S trap
for water closet squatting pan including jointing the trap with the
pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A)
Vitreous China.) ( Providing and fixing in Cement Mortar 1:3 (1-
Cement : 3-coarse sand)a, pair of white vitreous China 250mm x
130mm x 30mm footrest to long pattern squatting pan water
closet.) ( Providing and fixing G.I. inlet connection for flush pipe
[53] Providing and fixing wsh down water closet (European type, W.C. 10.00 Nos 1884.25
Pan) with integral P or S trap including jointing the trap with soil
pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover
to be measured and paid for separately)(A) vitreous China Pattern
:(i) in white colour ( Providing and fixing in position with clamps
etc. 32mm nominal internal diameter galvanised steel tube flush
pipe for high level flushing cistern including connecting the flush
pipe with cistern and closet and making good the walls and floors.)
(Providing and fixing G.I. inlet connection for flush pipe with W.C.
Pan) ( Providing and fixing plastic seat and cover for wash down
water closer with C.P. brass hinges and rubber buffers. (B) Black
plastic seal and cover.)
[54] Providing and fixing cast iron(Spun) Nahni trap of the following 28.00 Nos 606.09
nominal diameter of self cleaning design with C.I. screaed down or
hinged grating including cost of cutting and making good the walls
and floor 100mm inlet and 50mm outlet.
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[55] Providing and fixing S.W. gully trap with C.I. grating brick masonry 15.00 Nos 1246.92
chamber and water tight C.I. cover with frame of 300mm x 300mm
size (inside)with standard weight. (i) Square mouth traps.(B)
150mm x 100mm size P or R type.
[56] Providing and fixing cast iron spigot and socket soil, waste and 60.00 Rmt 890.46
ventilating pipes of the following nominal size.(C) 100mm dia.
[57] Providing and laying (to level or slopes)and jointing with stiff 90.00 Rmt 211.58
mixture of Cement Mortar in proportion 1:1 Salt glazed stone ware
pipes including testing of pipes and joints complete.(A) 100mm dia.
[58] Providing and laying (to level or slopes)and jointing with stiff 30.00 Rmt 305.14
mixture of Cement Mortar in proportion 1:1 Salt glazed stone ware
pipes including testing of pipes and joints complete.(B) 150mm dia
[59] Providing and fixing on wall face C.I. Rain water pipe including 51.00 Rmt 286.46
filling the joints with spun yarn soaked in neat cement slurry and
cement mortar 1:2 (1-Cement: 2-fine sand) (A)75mm dia.
[60] Constructing brick masonry chamber for underground C.I. 8.00 Nos 2932.93
Inspection chamber and bends with bricks having crushing strength
not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light
duty) 455mm x 610mm intenal dimensions total weight of cover
with frame to be not less than 38Kg. (Wt. of cover 23Kg. and Wt. of
frame 15Kg.) R.C.C. top slab with 1:2:4 mix (1-cement: 2-coarse
sand: 4-graded stone aggregate 20mm nominal size)foundation
concrete 1:5:10 inside plaster 5mm thick with cement mortar 1:3
finished smooth with a floating coat of neat cement on walls and
bed concrete etc. complete. (i) Inside dimensions 455mm x 610mm
x 450mm deep for single pipe line
[61] Providing erecting and fixing double coated ISI water tank of 6000.00 Liters 3.95
required capacity each with all necessary fittings and connection
etc. complete on terrace.
[62] Providing and fixing washbasin with single hole for pillar tap with 16.00 Nos 2107.22
C.I. or M.S. brackets painted white including sutting holes and
making good the same but excluding fittings.(A) Vitreous China:(ii)
Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.
(Providing and fixing C.P. brass waste for washbasin or sink. (B)
40mm dia.) (Providing and fixing M.I. fisher union for washbasin or
sink. (A) 32mm dia.) (Providing and fixing pillar tap, capstan head,
screw down high pressure with screws, shanks and back nuts. (i)
15mm dia.) ( Providing and fixing brass screw down stop tap.(A)
[63] Providing and fixing Urinal of approved quality connecting the 8.00 Nos 1036.28
Urinal with waste pipe trap etc.complete. (A)White earthen ware
flat back or corner type size 430mm x 260mm x 350mm
[64] Providing and fixing Urinal of approved quality including 11.00 Nos 1554.17
connection with trap and with (A)Squating plate pattern white
earthenware 550mm x 300mm.
[65] Providing and fixing 12.5 Litres low level flushing cistern with a pair 10.00 Nos 2344.43
of C.I. or Mild brackets, complete with fittings such as lead valve
less syphon,15mm nominal size brass ball valve with polythene
float, C.P brass handle unions and couplings for connections, with
inlet, outlet and over flow pipes, 40mm dia. porcelain enamelled
flush bend including cutting holes in walls and making flush bend
with cistern and closet (over flow pipe to be measured and paid for
separately (A)Vitreous China (I) In white colour
[66] Providing and laying both side polished Kotah stone for shelves (A) 60.00 sqm 622.16
[67] Providing and laying both side polished Kotah stone for shelves (A) 24.00 sqm 665.59
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[68] Providing sock pit of 5.00 Cu.M. Volume including excavating and 1.00 Nos 3372.19
filling brick bats with dry masonry work at top for 45cm. height
including covering the top with stone including providing vatas in
C.M. 1:3 with finishing curing etc. complete as directed
[69] Providing and laying cement concrete 1:4:8 (1-Cement :4-fine sand: 119.00 Cum 2986.01
8-graded brick bat aggregates 40mm nominal size)and curing
complete excluding cost of formwork in pheriphery of building
[70] Providing and laying cement concrete 1:2:4 (1-Cement: 2-Coarses 119.00 Cum 3697.92
and : 4-graded stone aggregates 20mm nominal size)and curing
complete excluding cost of formwork in pheriphery of building
[71] Providing and laying controlled cement concrete M.200 exposed 33.00 Cum 10010.73
work with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in (B)
COLUMNS:(iii) Having cross-sectional area more than 0.12 Sq. M
and upto 0.18 Sq. M (Above Floor Two Level)
[72] Providing and laying controlled cement concrete M.200 exposed 3.00 Cum 10116.46
work with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in (B)
COLUMNS:(iii) Having cross-sectional area more than 0.12 Sq. M
and upto 0.18 Sq. M (Above Floor Three Level)
[73] Providing and laying controlled cement concrete M.250 exposed 3.00 Cum 9418.06
work with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in (A)
BEAMS:(iii) Having cross-sectional area more than 0.08 Sq. M and
upto 0.12 Sq. M
[74] Providing and laying controlled cement concrete M.250 exposed 39.00 Cum 7922.20
work with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in (A)
BEAMS:(iii) Having cross-sectional area more than 0.12 Sq. M and
upto 0.18 Sq. M
[75] Providing and laying controlled cement concrete M.200 exposed 91.00 Cum 7753.60
work with curing etc. complete including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in Slabs up to
10 to 15 cm thickness.(FF Slab)
[76] Brick work using common burnt Clay building bricks having 25.00 Cum 4626.94
crushing strength not less than 35 kg / sq.cm in super structure
above plinth level up to stair cabin in Cement mortar 1:6 (1
Cement : 6 fine sand) (A) Modular
[77] Providing and Laying Chicken Mesh at RCC member & Brick 321.00 Sqm 184.03
Masonary Junction as per instruction of Enginner inCharge.
[78] Providing 10mm thick cement plaster in single coat on 18.00 Sqm 214.31
brick/concrete walls for interior plastering upto floorthree level
and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-
sand) finishing with floting coat of neat cement slurry
[79] Providing and laying broken chine mosaic flooring for terrace using 642.70 Sqm 747.29
12 mm to 20 mm broken pieces of glazed tiles to be laid over
cement mortar 1:3 to plain or slope and to be tempered to bring
mortar creme out upto surface using white cement including
rounding off junctions and extending them upto 15 cm along the
wall,clearing with water and oxalic
acid etc. as directed.
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[80] Providing, fabricating and supplying and fixing panels of aluminium 229.00 Sqm 2381.69
composite panel cladding in pan shape in metallic colour of
approved shades made out of 4mm thick aluminium composite
panel material consisting of 3mm thick FR grade mineral core
sandwiched between two aluminium sheets (each 0.5mm thick).
The aluminium composite panel cladding sheet shall be coil coated
with Kynar 500 based PVDF/Lumiflon based fluoropolymer resin
coating of approved colour and shade on face #1 and polymer
(Service) coating on face #2 as specified using stainless steel
screws, nuts, bolts, washers, cleats, weather silicone sealant,
backer rods etc.
[81] Providing and Constructing a junction chamber of size 0.35 x 0.35 x 16.00 Nos 1108.98
0.60 mt, including connecting rainwater pipes, half brick work with
plaster & C.C. 1:2:4 flooring bed 50mm and covered with RCC slab
100mm thick incl. all labour, material, excavtion etc. complete.
[82] Providing, laying and jointing in true line and level 110 diametre 160.00 Rmt 835.15
U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain
and other end socketed with rubber ring, & fittings conforming to
ISI 14735-1999 of approved make for drainage system pipe line,
pipe shall be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using of PVC clamp of the size 110 mm
diametre x 149 mm length x 145 mm heigh at every 2000 mm
center to center or shall be concealed in walls as directed including
necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement
including cost of all materials.
[83] Providing, laying and jointing in true line and level 160 mm dia. 84.00 Rmt 831.22
U.P.V.C SWR (Type B) pipe conforming to IS 13592-1992 with one
end plain and other end socketed with rubber ring & fittings
conforming to ISI 14735-1999 of approved make for drainage
system pipe line, pipe shall be jointed with each other with rubber
lubricant, pipe shall be fixed on wall using of PVC clamp of the size
110mm dia x 149mm length x 145mm height at every 2000mm
center to center or shall be concealed in walls as directed including
necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement
including cost of all materials.
[84] Providing & Constructing filter chamber of size 2.06 x 1.21 x 1.20 1.00 Nos 10053.54
mt. including connecting rain water pipes, half brick work with
plaster & C.C. 1:2:4 flooring bed 50mm and covered with RCC slab
100mm thick incl. all labour, material, excavation etc. complete.
[85] Providing & Constructing percolation sockwell of 2.54 mt internal 1.00 Nos 69544.56
clear diameter and 5.00 mt depth including honey comb brick
masonary in C.M. 1:6, R.C.C. top slab of 10 cm thick filling with
gravel etc. complete incl. all labour, material, excavation etc.
[86] Providing and laying controlled cement concrete M 200 12.20 Cum 4251.17
and curing complete including the cost of formwork but
excluding the cost of reinforcement for reinforced concrete
work in Footing & Column upto Plinth
[87] Brick work using common burnt Clay building bricks having 80.30 Cum 4021.03
crushing strength not less than 35 kg / sq.cm in foundation and
plinth in Cement mortar 1:6 (1 Cement : 6 fine sand) Conventional
[88] Steel work, welded in built up sections framed work including 26.71 Qtl 9978.42
cutting, hoisting,fixing in position and applying a priming coat of
red lead paint. (D)In trusses and trussed purlins, upto 25 M. span
and 15 M. ovarall height.
[89] Providing corrugated G.I. sheets roofing fixed with galvanized iron 106.90 Sqm 727.13
"J" or "L" hooksbolts and nuts 8mm diameter with bitumen and G.I.
limpet washers, filled with white lead complete excluding the cost
of purlins rafters and trusses (1) 0.80mm thick sheet
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[90] Providing and fixing pre-cast Rubber Dye inter locking concrete 929.30 Sqmt 686.91
block 60 mm thick with grade of concrete M300 pnumatic
compressed by mechanically pressed and as per approved design
Conforming to IS 15658:2006 including 35 mm sand layer for
levelling and filling the joint with sand in proper line and level as
per guidlines of IRC SP 63 : 2018 etc complete
[91] 15mm thick cement plaster in single coat on brick / concrete walls 874.00 Sqm 186.13
for interior plastering up to floor two level and finished even and
smooth in(I) Cement mortar 1:3 (1 cement : 3 sand
[92] Applying priming coat over new steel and other metal surface after 107.00 Sqm 35.00
over and including preparing the surface by thoroughly cleaning oil,
grease dirt and other foreign matter and scoured with brushes fine
steel wool, scrapers and sand paper with ready mixed priming
paint brushing red lead
[93] Painting two coats (excluding priming coat) on new steel and other 107.00 Sqm 87.81
metal surface with enamel paint brushing, interior to give enamel
paint brushing,interior to give an even shade including cleaning the
surface of all dirt, dust and other foreign matter
[94] Providing and laying controlled cement concrete M.200 (1 Cement, 15.70 Cum 5080.33
1.5 Sand, 3 Grade Stone Aggregate 20 mm Nominal Size) and
curing complete, including cost of formwork – (a) Foundation and
[95] Brick work using common burnt clay building bricks having crushing 111.60 Cum 4289.33
strength not less than 35 kg/Sq. Cm. in super structure above floor
two level in Cement Mortar 1:6 (1 Cement : 6 fine sand)
Conventional Bricks
[96] Providing and fixing windows with 40 × 40 × 5 mm iron angle & 8.70 Sqm 3965.84
frame 30 × 30 × 4 mm size in double shutter with BG 20 gauge
sheet plates with holdfasts, iron hinges, handles, stopper and
locking arrangements etc. Complete steel welded is built-up
section cutting, hoisting, finishing in two coats of oil painting over
coat of primer coats etc. complete.
[97] Providing & laying ordinary C.C. M-200 (C.C. 1:1.5:3 – 1 cement, 1.5 0.80 Cum 8376.84
coarse sand, 3 graded stone aggregate of 20 mm nominal size) and
for R.C.C. lintel/sill bands including finishing smooth with curing of
formwork but excluding the cost of reinforcement for floor two
[98] Providing & laying ordinary C.C. M-200 (C.C. 1:1.5:3 – 1 cement, 1.5 0.80 Cum 6816.26
coarse sand, 3 graded stone aggregate of 20 mm nominal size) for
reinforced concrete chhajjas not exceeding 10 cm thickness up to
floor two level, including finishing the exposed surface with C.M.
1:3 (1 cement, 3 fine sand) to give a smooth and even surface,
centering, formwork and curing complete, excluding the cost of
reinforcement, up to floor two level.
[99] Applying two coats of Birla or Asian acrylic lappy (putty) and two 322.00 Sqm 40.60
coats of primer of approved brand and manufacture on new wall
surface to give an even shade, including thoroughly brushing the
surface free from mortar dropping and other foreign matter and
sand papered smooth.
[100] Providing and laying rough chiseled dressed stone flooring over 20 61.00 Sqm 616.26
mm thick base of cement mortar 1:5 (1 cement : 5 coarse sand) or
L.M. 1:1.5, including pointing with cement mortar 1:2 (1 cement :
stone dust) etc. complete, 25 mm thick.
[101] Providing and fixing rolling shutters of approved make made of 80 34.00 Nos 2866.83
mm wide M.S. laths inter-locked together through their entire
length and jointed together at the ends by end locks mounted on
specially designed pipe shaft with bracket plates, guide channels
and arrangements for inside and outside locking with push & pull
operation complete, including the cost of hood cover and spring.
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[102] Providing and fixing 27.5 cm long wire spring grade No. 2 of 8.00 Nos 637.22
approved make for rolling shutters.
[103] Providing and laying controlled cement concrete M-200 and 20.00 Cum 10760.24
finishing smooth with curing etc. complete, including the cost of
formwork but excluding the cost of reinforcement for R.C.C. work
in: (A) Beam: Having cross-sectional area 0.05 to 0.08 sq.m. upto
floor two level.
[104] Providing and laying C.C. 1:1.5:3 (1 cement, 1.5 coarse sand, 3 5.90 Cum 5928.54
graded stone aggregate of 20 mm nominal size) and finishing with
curing etc. complete, including cost of formwork – (a) Foundation
and Plinth for coping.
[105] Finishing wall with waterproofing cement paint of approved brand 868.00 Sqm 57.44
and manufacture on wall surfaces (two coats) to give an approved
shade of required shape and even shade, after thoroughly brushing
the surface to remove all dirt and remains of loose powdered
[106] Providing and fixing M.S. Grills for hollow pipe 50 × 50 mm framed 14.70 Sqm 1646.62
entry gate/wicket gate/gate etc., grill made of 25 × 25 mm size
hollow M.S. pipes, design as per drawing, welding pipes in frame
including cutting, transportation, primer & oil painting, fixing in
position etc. complete.
[107] Earthwork in cutting in all sorts of soil and soft murrum including 800.50 Cum 104.21
conveying and putting the stuff in spoil bank, maintaining
minimum distance of 5 m between top edge and cutting and toe of
[108] Earthwork for embankment including breaking clods, dressing with 383.00 Cum 169.44
all lead and lift and including watering, rolling and consolidation of
subgrade in layers at O.M.C. to required dry density, including
filling the depression which occurs during the process using power
roller 8T to 10T. (E) From borrow area within 3.0 KM lead.
[109] Construction of granular sub-base by providing close graded 153.20 Cum 1669.53
material, mixing in a mechanical mix plant at OMC, carriage of
mixed material to work site, spreading in uniform layers with
motor grader on prepared surface and compacting with vibratory
power roller to achieve the desired density, complete as per Clause
[110] Providing, laying, spreading and compacting graded stone 191.50 Cum 1763.46
aggregate to wet mix macadam specification, including remixing
the material with water at OMC in mechanical mix plant, carriage
of mixed material by tipper to site, laying in uniform layers with
paver in sub-base/base course on well-prepared surface and
compacting with vibratory roller to achieve the desired density.
[111] Providing and Laying of Sand Bed below interlocking concrete block 26.90 Cum 802.45
[112] Providing and fixing precast concrete kerb stone of grey cement- 220.50 Rmt 361.65
based concrete block, 30 cm length, 30 cm height and 15 cm thick,
of M250 grade concrete as per approved design, including
excavation for fixing in proper line and level, filling the joint with
C.M. 1:3 (1 cement : 3 fine sand) etc. complete.
[113] Drilling of 165 dia. bore hole in overburden strata (lime stone & 240.00 Rmt 865.57
yellow sticky clay formation) by DTH rig up to required depth
mt. including fixing 180.00 dia. PVC pipes (blank and slotted) if
required, further drilling of 165.00 mm dia. bore hole in hard rock
strata by DTH drilling method up to total depth of 165.00 mt.
including measuring the yield by "V" notch and flushing of bore etc.
complete. (a) 0.0 to 300 mt. (165.00 mm dia. bore)
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[114] Providing and supplying in standard length ISI mark rigid 6.00 Rmt 1458.44
unplasticised PVC pipes suitable for casing with ring fit joint
including cost of rings as per IS specification no 4985/1988
including all ocal and central taxes transportation, freight charges,
octroi, inspection charges, loading unloading, conveynce, to market
and including cost of jointing meterial etc complete for following
dia. & ring fit type pipe. (B ) Test pressure 6.00 Kg / Cm2 with
excise duty. ( 7 ) 200.00 mm dia.
[115] Supplying, Fixing, Installation & Testing of approval make electric 1.00 Nos 37959.84
motor driven submersible pump set confirming to IS 8034 / 198 /
AND motor confirms to IS 9283 / 1979 working at 3-phase 400 /
440 volt, 50 C/S A.C Supply and 2900 R.P.M for 6" Dia.Bore well. (
) 240 mt Head, & 17.5 H.P.
[116] Flat P.V.C. cable for Sub Pump detailed technical specification as 240.00 Rmt 87.87
per GWSSB Rate contract.
[117] Providing and supplying in standard length ISI mark high density 240.00 Rmt 257.55
polyethylene (H.D.P.E.) pipes suitable for potable water as per ISI
Specification No. 4984/1995, including all local and central taxes,
transportation, freight charges, octroi, inspection charges, loading,
unloading, conveyance to the departmental stores etc. complete.
[118] Providing and supplying control panel board for sub. pump, 1.00 Nos 9219.28
detailed specification as per GWSSB RIC S.D. Form 8 to 10 H.P.
[119] Providing and laying ordinary C.C. M-200 (C.C. 1:1.5:3 – 1 cement, 0.60 Cum 8376.83
1.5 coarse sand, 3 graded stone aggregate of 20 mm nominal size)
and for R.C.C. lintels, including finishing smooth with curing of
formwork but excluding the cost of reinforcement for above floor
[120] Providing and laying ordinary C.C. M-200 (C.C. 1:1.5:3 – 1 cement, 0.30 Cum 6816.27
1.5 coarse sand, 3 graded stone aggregate of 20 mm nominal size)
and for reinforced concrete chhajjas not exceeding 10 cm thickness
up to floor two level, including finishing the exposed surface with
C.M. 1:3 (1 cement, 3 fine sand) to give a smooth and even surface,
centering, formwork and curing complete, excluding the cost of
reinforcement, above floor two level.
[121] Providing 15 mm thick mala finished cement plaster in single coat 59.00 Sqm 234.34
on fair side brick/concrete walls for interior plastering up to floor
two level and finished even and smooth, and finishing with floating
coat of neat cement slurry: (i) Cement mortar 1:3 (1 cement :
[122] Providing and fixing to wall, ceiling and floor galvanised Mild Steel 100.00 Rmt 397.87
tubes (Medium grade) of the following nominal bore, tube fittings
and clamps, including making good the wall, ceiling and floor. (C)
[123] Providing and fixing to wall, ceiling and floor galvanised Mild Steel 30.00 Rmt 496.43
tubes (Medium grade) of the following nominal bore, tube fittings
and clamps, including making good the wall, ceiling and floor. (C)
[124] Providing and fixing C.I. Manhole cover 0.60 m × 0.45 m size having 4.00 Nos 958.17
weight not less than 35 kg.
[125] Trenching in ordinary / hard soil up to a depth of 60 cm, including 64.00 Nos 235.60
removal and stacking of serviceable materials and then disposing of
surplus soil, by spreading and neatly levelling within a lead of 50 m
and making up the trenched area to proper levels by filling with
earth or earth mixed with sludge or/and manure before and after
flooding trench with water (including cost of imported earth,
sludge or manure).
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[126] Providing and fixing M.S. tree guard 50 cm square in plan, height 64.00 Nos 4481.37
1.40 metre above ground level and 0.50 metre below ground level.
The vertical members shall consist of four nos. of angle iron of size
20 × 20 × 4 mm, 1.9 m long, one at each corner, and 8 nos. flat iron
of size 25 × 4 mm, 1.4 m long. The vertical members shall be
welded to 4 nos. 25 × 4 mm M.S. flats placed horizontally around
the vertical members of the cage. One name plate of 1 mm thick
M.S. sheet of size 250 × 100 mm shall be welded to the tree guard
near the middle height and lettered CPWD / PWD or any other
approved name. The tree guard shall be fixed to the ground by
making suitable holes and by embedding four corner legs in the
ground, including refilling the earth, compaction etc. complete. The
tree guard shall be painted with two coats of paint of approved
brand and manufacture over a coat of primer, complete in all
[127] Grassing with selection No. 1 grass / Turf including watering and 126.00 Sqm 260.42
maintenance of the lawn for 30 days or more till the grass forms a
thick lawn, free from weeds and fit for mowing, including supplying
good earth, if needed.
[128] Providing drip irrigation network with sprinkler jet & control valve 126.00 Sqm 50.50
including all necessary materials & labour for fixing etc. complete
for Office garden & Lawn area.
[129] Supplying, Providing & Fixing of precast benches of cement 15.00 Nos 2828.00
concrete, top covered with a layer of latest mosaic chippings/tiling
shade as directed by Engineer-in-Charge with specified "Name
Plate" casted with, at the time of manufacture of benches, as
directed, cured, rubbed and polished properly, transporting at site
and fixing the bench on two leg pedestal C.C. with necessary
excavation, PCC, fixing pedestals, benches in line and levels with
jointing material etc. complete.
[130] Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 217.00 Pt 582.77
sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length , in below
type of pipe erected with 6A Modular type switch / bell push &
accessories and earth continuity of following type, erected on PVC
/ Metallic/Wooden box, single mounting base frame covered with
textured/metallic/white front plate modules erected on / in wall /
ceiling as per pipe erected, with necessary Lamp holder/ceiling rose
/ H.D.Connector as directed.(f) with medium class Rigid PVC pipe
and accessories erected concealed in wall/ceiling complete Cat. III
[131] Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 57.00 Pt 809.01
(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated
multi strand copper wires up to 10 mtr length, in below type of
pipe erected with 6A Modular type switch and hum free EME
step type electronic fan regulator mounted and accessories with
earth continuity of following type erected on PVC /
Metallic/Wooden box, single mounting base frame covered with
textured/metallic/white front plate modules erected on / in wall /
ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed.(f) with medium class Rigid PVC pipe
and accessories erected concealed in wall/ceiling complete Cat. III
[132] Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 27.00 Pt 612.06
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated
multi strand copper wires up to 10 mtr length, in below type of
pipe erected complete with Modular type switch & 5 pin Plug
erected on PVC / Metallic/Wooden box covered with appropriate
front plate modules erected on / in wall / ceiling as per pipe
erected with following type of accessories. [I] For 6A Plug and 6 a
switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb
db board (f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete Cat. III
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[133] [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire 15.00 Pt 894.86
from mcb db board.(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling complete Cat. III
[134] Point wiring for on board Looped Plug with 6A Modular type switch 52.00 Pt 309.06
& 5 pin socket erected on PVC / Metallic/Wooden box, single
mounting base frame covered with textured / metallic/white front
plate modules erected on / in wall / ceiling with following type
accessories Cat. III
[135] Providing following type of Modular Type Accessories mounted 27.00 Ea. 160.59
with PVC / metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate , modules
erected with necessary connections as per site situation directed
by Engineer In charge.(3) Two Pin/RJ-11 Telephone Socket [A] For
One Gang Cat.III
[136] (7) Blank Plate Single Cat.III 87.00 Ea. 25.25
[137] (8) Computer RJ-45 socket Cat.III 45.00 Ea. 160.59
[138] (10) 6/16Amp. Universal socket Cat.III 7.00 Ea. 199.98
[139] (9) 16 Amp. SP one way switch Cat.III 7.00 Ea. 180.79
[140] Providing & erecting following type of Modular Type Accessories 144.00 Ea. 36.36
with necessary connection. As desired by Engineer In charge (5)
LAN cable connector with ferule
[141] Providing and erecting ISI mark Medium class RIGID PVC PIPES of 1400.00 Rmt 24.24
following size complete to be erected on/in wall or ceiling erected
with necessary PVC fittings & Junction boxes fixed with adhesive
solution & Clamps with following dia of pipes, in approved manner
as directed (a)20 mm
[143] Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated 1220.00 Rmt 104.03
ISI marked stranded Copper conductor wire in following type of
pipe to be erected concealed in /flushed on wall/ceiling, with
sq. mm copper conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following size (A) With medium
class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm
[144] providing and erecting Mains with 1.1 KV grade FRLS PVC insulated 180.00 Rmt 140.39
ISI marked stranded Copper conductor wire in following type of
pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green colour for
earth continuity of following size (A) with medium class Rigid PVC
pipe and accessories (a) 2 wire 4 sq. mm
(use earth wire of 4 sq.mm )
[146] Supplying and erecting Flexible PVC insulated multi strand multi 67.00 Rmt 58.58
core 1.1 kv grade ISI marked copper wires of following size to be
erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed
[147] Supplying & erecting approved make Telephone Cable electrolytic 540.00 Rmt 20.20
copper conductor PE insulation twisted in two pairs, & wrapped
with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer
Jacket suitable for telephone wiring & confirming to C-DOT erected
in existing pipe. of following size of conductors & nos.of pairs. With
necessary connections.[A] Conductor Size 0.5 mm (a) Unarmoured
[148] (b) Armoured [Jelly Filled](3) Fifty Pairs 72.00 Rmt 467.63
[149] Supplying & erecting approved make LAN cable of following size in 900.00 Rmt 47.47
existing pipe as per direction [C] CAT -
[150] Providing & erecting main Distribution (MDF) indoor type, back 2.00 Ea. 1368.55
mounted frame as per DoT standard approved with krone strips (b)
Suitable for 20 pair
[151] (c) Suitable for 50 pair 1.00 Ea. 1747.30
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[152] Providing & erecting Switch board for Computer or electric 43.00 Ea. 1133.22
apparatus consisting of following modular type accessories
mounted with PVC / Metallic concealed/open box with single
mounting base frame covered with textured/metallic /white front
plate,modules erected with necessary connections as directed
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III
[153] Decorative call bell Ting-tong box type 250 volts complete erected 20.00 Ea. 71.71
[154] Supplying & erecting Electronic Type Cordless Call Bell erected on 3.00 Ea. 250.48
PVC/Metal board having portable bell push working on D.C. & bell
on 230V A.C. supply with cells / battery
[155] Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 169.00 Ea. 535.30
Watt to 0.5 Watt assembled on single MCPCB, with housing used
as a heat sink shall be made of thick sheet Steel conforming to IS:
513/CRCA/ aluminium die cast powder coated and high U.V. &
corrosion resistance with diffuser with company mark/name 160V
to 270V, Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.) (A) Tube Light with integral driver (v)
36-40 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll
[156] Supplying and erecting led lamps with following wattage capacity 13.00 Ea. 188.87
of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in
built-surge protection,Polycarbonate diffuser, mounting suitable
for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral
type, with PC diffuser suitable LAMP holder (iii) 10 to 15 watts
[157] Supplying and erecting LED street light / Flood light fittings with 14.00 Ea. 5080.30
High power White LEDs wattage of 3 Watt and above assembled on
single MCPCB, efficiency more than 130 lm/w and corrosion free
High pressure die cast aluminum housing with smooth finish
powder coated and heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened glass with company
mark/name engraved or embossed 160 to 270 V,Power Factor
more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio
>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency
> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.) (A) Street Light (IP-65), Surge
protection -4KV integral and ,Light must have 440VAC line supply
with over-voltage protection. (iii) Above 60 to 89 watts Cat-lll
[158] (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light 6.00 Ea. 8201.20
must have 440VAC line supply with over-voltage
protection.(vi)above 160 to 199 watts cat-III
[159] (C) Post Top Lantern LED fitting comprises of finish cast aluminum 2.00 Ea. 3478.44
spigot and spun aluminum canopy fixed with opal polycarbonate,
pipe arrangement for vertical mounting driver and accessories
wired upto terminal block.IP 65 (i)20- 30W Cat-lll
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[160] Pproviding and erecting Approved make Four pole moulded case 5.00 Ea. 6790.23
circuit breaker having breaking capacity ICU of 25 KA. at
V,having normal current rating up to 25 A to 100A. with Fixed
thermal & magnetic release suitable to work on A.C. supply 50 Hz.
with all internal connections, spreader tinned copper & complete
erected in existing 16 G.M.S. housing. ICS=100% of ICU only
[161] Providing and erecting Approved make Four pole moulded case 4.00 Ea. 8861.74
circuit breaker having breaking capacity ICU of 35 KA. at 415 V.
having normal current rating 125A. with Fixed thermal & magnetic
release suitable to work on A.C.supply 50 Hz. with all internal
connections, spreader tinned copper & complete erected in
existing 16 G.M.S. housing. ICS=100% of ICU only Cat III
[162] Providing and erecting Approved make Four pole moulded case 2.00 Ea. 17843.67
circuit breaker having breaking capacity ICU of 35 KA. at 415 V.
having Normal current rating 200A.with variable Thermal &
magnetic release suitable to work on A.C.supply 50 c/s. with all
internal connections, spreader tinned copper & complete erected
in existing 16 G.M.S.housing ICS=100% of ICU only Cat III
[163] Supplying & erecting approved make Four Pole 415V change over 1.00 Ea. 12241.20
switch interior for panel mounting with operating mechanism
A.C.23 duty confirming to IS for (D)200A Cat-lll
[164] Supplying and erecting triple pole & neutral 440V / 500V panel 1.00 Rmt 1961.42
mounting Copper Busbars with four equal Nos. of electrolyte bus
having current density not more than 1.6 Amp. / sq.mm (Rated
current / cross section area) duly wrapped with colour insulating
tape for phase sequence of following current carrying capacity,
erected with necessary bus bar supports /insulators, main cable
socket to each bar, erected in existing cubical panel with necessary
connections.(A) Suitable for 100 Amp. Capacity
[165] (B) Suitable for 200 Amp. capacity 2.00 Rmt 3202.71
[166] Supplying KITKAT pattern porcelain cut-out fuse with base of 3.00 Ea. 420.16
following current capacity erected on existing block board.(vi)
[167] providing and erecting Miniature circuit breaker single pole 6A to 154.00 Ea. 123.22
25A suitable to operate on 240 V A.C. system and having breaking
capacity 10 KA to be erected in existing box. confirming to IS
8828/1996 with ISI Mark Cat.III
[168] Providing & erecting 240 V MCB double pole switch for motor & 12.00 Ea. 362.59
inductive load (C Curve) having 10 KA breaking capacity &
confirms to IS : 8828 in existing box having following capacity (B)
40 Amp. Cat.III
[169] Providing & erecting 415V MCB Four Pole Switch for Lighting Load 20.00 Ea. 702.96
(B curve) having 10KA breaking capacity & confirms to IS :8828 in
existing box having following capacity (b)40 Amp.
[170] Providing & erecting 415 V MCB Four Pole for Motor & Inductive 4.00 Ea. 811.03
Load (C Curve) having 10KA breaking capacity & confirms to IS
:8828 in existing box having following capacity (c)63 Amp.
[171] Providing and erecting Sheet Steel powder coated MCB distribution 8.00 Ea. 3412.79
board - flush / surface mounted fitted with busbar, neutral link,
earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
without MCB to house appropriate nos. of MCBs.(The DBs should
be used of same company of MCB to be used) suitable for (B) three
phase incoming and single phase horizontal type outgoing Per
phase isolation type (PPI) (b) sheet steel double door (iii)8 way
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[172] providing and erecting Approved make RCCBs conforming to IS: 24.00 Ea. 2458.34
12640 and having sensitivity of 30 mA and Short Circuit withstand
capacity of 10 KA and suitable for operation on single phase
V,50Hz. having characteristic of quick action & tripping with all
advance feature & do not incorporate any electronic component.
for following Max. rating erected as directed (ii) 40Amps. DP
[173] Providing and erecting Annealed bare Copper wire 4.064 to 1.626 3.00 Kg 794.87
[174] Supplying & erecting earth pit of minimum bore dia.150mm size 3.00 Ea. 4591.46
approved make Earthing Electrode consisting Pipe-in-Pipe
Technology as per IS 3043-1987 made of corrosion free hot dipped
G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron
galvanising, Inner pipe dia of 25 mm having 200-250 Micron
galvanising, connection terminal dia of 12mm with constant ohmic
value surrounded by highly conductive compound with high charge
dissipation suitable for following type of applications with chamber
and heavy duty cover. (A)(approved make OEM has to submit test
certificate including value of earth resistance of installation duly
stamped and signed by agency and officer Incharge has to ensure
the value of earthing resistane mentioned in test Certificate) &
having back filling compound of (B) Inner chemical (CCM
Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-
2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing compound should
be capable to retain moisture for long time Necessary test report
must be submitted by Agency. (a) For Electrical Installation up to
440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
[175] Providing & erecting weather proof, dust & vermin proof, floor 3.00 Sq.Mtr. 10468.65
mounted front operated indoor type cubical panel board
necessary IP-42 and above protection as per approval from
engineer incharge made from 14 SWG thick CRC M.S. sheet for
outer body & doors, 16 SWG thick CRC M.S.sheet for internal
partitions with necessary accesories , supporting angles/ flats
channel including cutting, bending, drilling, welding, riveting with
internal partitions & cable alley as per requirements & instruction
of engineer-in-charge with erection of supplied switch gears,
BUSBARS, suitable size of inter connecting PVC copper wire /
copper-aluminium strips, rubber grommets, rib, bakelite control
fuses/MCB for measuring instruments, earth bus & earth bolts,
foundation flange - bolts-base Plates, sufficient nos. of hinged
doors, handles with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice board,necessary
ventilation,earthing strip complete. The Panel shall be painted
with epoxy powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains & Copper Aluminium
strips, meters, Fuses etc. The dimension shall be measured
excluding base beams) The panel shall be supplied with following
approved manufacturers with following size.(A) locally fabricated
panel board (i) with 350 mm depth
[176] Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable 128.00 Rmt 112.11
Aluminium conductor for 1.1 KV. to be laid on wall with necessary
clamps or in existing trench / pipe of following size of cables. (B)
[177] Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable 110.00 Rmt 589.84
multistrand Aluminium conductor for 1.1 KV. to be laid on wall
with necessary clamps or in existing trench / pipe of following size
of cables (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[179] Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable 166.00 Rmt 151.50
multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on
wall with necessary clamps or in existing trench / pipe of following
size of cables (B) 4 core 6 Sq. mm
[180] Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable 65.00 Rmt 229.27
multistrand Aluminium conductor for 1.1 KV. to be laid on wall
with necessary clamps or in existing trench / pipe of following size
of cables (B) 4 core 25 Sq. mm
[181] Making trench in soft soil of suitable width of 90 cm deep for laying 290.00 Rmt 55.55
cable or locating the fault all over the run and back filling the same
and making the surface as normal ground.
[182] Providing & laying approved make Double walled corrugated pipes 160.00 Rmt 62.62
(DWC) of polyethylene(conforming to IS 14930 II )with necessary
connecting accessories of same material at required depth in
existing trench for laying of cable. below ground / road surface
for enclosing cable (A)50 mm outer dia
[183] (B)63mm outer dia 62.00 Rmt 73.73
[184] Providing and, fixing heavy duty flange type brass cable gland with 2.00 Ea. 51.51
rubber ring for PVC insulated armoured cable complete with out
going tails, insulating tape etc for following size of cables.(E) 2 to
[185] Providing and, fixing heavy duty flange type brass double 2.00 Ea. 75.75
compression type cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails, insulating tape etc
for following size of cables.(B) 3 & 1/2 core 35/50 Sq. mm
[187] Solder less crimping type Aluminium lugs conforming to IS suitable 8.00 Ea. 15.15
for cable of following size evenly crimped with high pressure tool &
connected to switchgear terminals with brass/cadmium plated nut
bolts in an approved manner. (C) 16/25 Sq.mm.
[190] Providing and erecting Approved make Ceiling fan with double ball 57.00 Ea. 1596.81
bearing ISI mark with condenser A.C. 23OV.50 Hz.1200 mm. sweep
complete, canopy erected on existing hook or clamp with earthing.
[Make shall be approved by Engineer in charge]
[191] Supplying and erecting 19 / 20 mm. nominal bore Medium Class 57.00 Rmt 108.07
M.S. Pipe down rod erected duly painted for fan complete with
proper insulation without leakage and earthing.
[192] Supplying & erecting fan hook box of 10 mm M.S. round bar 57.00 Ea. 108.07
bounded to the RCC bars up to 50mm length each side and pierced
through a 16 Gauge M.S. box / Heavy Duty PVC box complete
erected concealed in Ceiling with necessary finishing.
[193] Providing 2.5mm.thick laminated acrylic sheet to cover the fan 57.00 Ea. 18.18
hook or Fan box.
[194] Supplying & erecting approved make low noise decorative exhaust 15.00 Ea. 1703.87
fan having square frame ABS body with inbuilt lowers & square
frame.250mm with 1350 RPM Cat.II
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[195] Supplying and erecting approved make Octagonal pole made from 7.00 Ea. 9011.22
HR sheet steel. The pole should be made as per IS. and shall be
coated with hot dip galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction box consist of
terminal plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and
arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer
considering site requirement.(D) 6 Mtr. Long 70 mm Top X
mm bottom dia, 3 mm thickness with 200mmX200mmX12mm
base plate, 4-M20 Bolts and 600mm long with necessary G.I. J-
Bolt.Approx Pole weight 59 kg
[196] Supplying & erecting approved make SMC press moulded 8.00 Ea. 476.72
composite FRP. loop-in, loop-out approx. 2mm thick box complete
with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting
mob & hinged doors as per requirement having locking
arrangements with mounting clamp with nuts, bolts & washers
suitable for erection on pole with cable clamps& earth bolt of
following size of box.(C)150mm x 125mm x 100mm [deep]
[197] Providing and erecting street light pole bracket comprising main B 7.00 Ea. 758.51
Class MS pipe of 4.2 cm/require outside dia. complete with suitable
B Class M.S. sleeve tubing of approx. 45cms.length and suitable for
76.5 mm / 80mm. / require size pole top having sufficient fasteners
for fixing the brackets and having spread of 1 mtr. length with
suitable rise as per site condition & suitable welded stiffener
reducer and nipple with check nut complete painted with one coat
of Red oxide / PU base primer and two coats of Aluminium / PU
paint. paint with following nos of arms. [B] Double Arm Bracket
[198] Supplying & erecting IP 55 grade following size section pillar 1.00 Ea. 16691.26
fabricated from joint less M.S. Sheet with angle iron legs made
from jointless M.S. Angle with cable clamps to be buried in ground
to have appropriate erection to work uniform until erected with
cement concrete foundation and 45 cm high bricks work finishing
with plaster etc. hinged double door internally supported on both
side, with internal and outside looking arrangement with look and
keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is
welded and other with nut and bolt for erecting Bakelite sheet.
Painting the Section Pillar inside and out side with three tank
powder coated paint. section pillar roof should be without joint
with water leakage proof & tested as per IP 55 test & followed by
IS 2147 of 1962 (A) 150 X 90 X 75 cm section pillar fabricated from
14 Gauge MS Sheet with angle iron legs 95 cm long made from
X 40 X 6 mm thick MS angle.
[199] Supplying and erecting HYLAM sheet on existing angle iron 1.00 Sq.Mtr. 771.64
frame.for following thickness (B) 4mm
[200] Supplying & erecting approved make Digital time switch having 1.00 Ea. 3168.37
lithium cell 6 years operative and operate battery backup 1 channel
day clock with 14 memory programme, suitable to operate on
240V + 5%, 16A with, floating contacts Minimum switching setup
time 1 minimum & LCD display. Also comprised permanent
ON/OFF switching. Programming switches & housed in fire proof
thermoplastic enclosure & transparent cover erected as required
with necessary connection erected as directed.
[201] Supplying & erecting power contactor ,AC3 duty for time switch 1.00 Ea. 2782.55
complete erected as per direction Cat III (D) 4 pole 440V 40 Amp.
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[202] Providing & erecting water cooler having storage capacity 150 Ltr. 2.00 Ea. 61482.74
& cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C.
The outlet temp. of the water should drop by 15˚C within a hour,
The water cooler should be comprising of hermetically sealed
compressor, fan motor, condensing unit, water tank surrounded by
evaporating, coil, thermostats, relay etc.complete with necessary
inlet & outlet connection. The body of water cooler will be made
from Stainless Steel and ISI certified.
[203] Supplying & erecting 5 stage single reverse osmosis water 2.00 Ea. 29187.99
purification system with M.S. powder coated frame, prefilter
housing with 'O' ring presediment filter GAC filter, carbon filter
suitable buster DC pump capacity 80 psi, mention with 40 psi inline
type post carbon filter auto low & high pressure switches with
following size of storage tank & LPH capacity & erected as directed
[C] 50 Ltr / Hr with 150 psi 2 nos booster pump
[204] Supplying and erecting approved make panel mounting type 3.00 Ea. 1275.63
Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts
range erected on existing panel board with all connection, wiring
etc .with manufacturers calibration certificate.
[205] Supplying and erecting approved make panel mounting type 3.00 Ea. 1558.43
Digital Ammeter having 3 digits LED display, external CT operated,
calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC
erected on existing panel board with all connection, wiring etc
.with manufacturers calibration certificate.
[206] Supplying and erecting Ammeter / Voltmeter selector switch for 3 6.00 Ea. 317.14
phase AC Supply 500 V on existing panel board with necessary
[207] Providing & erecting L.T. Current Transformer with bar primary 9.00 Ea. 274.72
50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box
duly secured with insulating materials connected to the meter
[208] Supplying and erecting approved make suitable panel indicator LED 9.00 Ea. 43.43
type lamp, lens cover, complete erected with necessary
[209] Providing & erecting open well horizontal mono block pump set 2.00 Ea. 20621.17
with cast iron body, complete for three phase submersible motor
having [D] For 5 HP 3 phase open well horizontal mono block pump
set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable
for 50/65 mm dia delivery pipe Cat.II
[210] Supplying and erecting Direct-on-line, Starter with 15A.rating 2.00 Ea. 2046.26
contractor and with 4-14A. range, directly operated thermal
overload relay in sheet steel enclosure for 3phase 415V.50 Hz. A.C.
motor up to 7.5 H.P.complete erected on P.W. Block with
necessary connection. Cat-lll
[211] Lowering of submersible motor pump set at the depth of following 2.00 Per Job 856.48
,complete with required. Nos. and size of casing pipes erected by
means of proper chain pulley block & pipe wrenches after checking
of threads of each pipe with coupling to take the load of the pump
set and pipe assembly filled up with water (D)For Open well
Horizontal submersible pump set for sump well (i) 1 HP to 5 HP
[212] Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 70.00 Rmt 146.45
flexible Submersible copper cable approved make of following
Size. (C) 3 Core x 4 Sq. mm
[213] Supplying, & erecting C.I. swing, check type non-return (Reflux) 1.00 Ea. 1020.10
Valve -ISI marked suitable for following size (A) 50 mm dia.
[214] Supply of following size of TOP & BOTTOM accessories i.e. Adaptor 1.00 Per Set 1489.75
set (CI) long, pump guard set, starter pipe Rubber ring for
submersible pump & UPVC column pipe as directed by Engineer -
in - charge with necessary plumbing as desired. [D] 50 mm dia
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[215] Providing and erecting Two way Centre off Four pole MCB Change 1.00 Ea. 1478.64
Over Switch (IS 13947-3 / IEC 60947-3) in existing box. (b) for
[216] Supplying and erecting Direct on line starter with 30 Amp. 1.00 Ea. 2168.47
(resistive @ 230v) power relay and with 2 to 5/ 4 to 10 / 8 to
amp. Range C.T. Operated electronic overload relay in engineering
grade plastic enclosure for 3 ph 415v 50 HZ A.C. motor up to 7.5 HP
with high voltage protection (above 480 v) and under voltage
protection (below 330 v) current sensing single phasing protection.
Reverse phasing protection, inverse current characteristic overload
protection with indication for On, OL, HV,LV SPP in a single unit
with feather touch start / stop push button, high temperature with
standing Bakelite terminals complete erected on P.W. Block with
necessary connection. [Cat.II]
[217] Providing & laying approved make ISI marked HDPE 6Kg / cm2 35.00 Rmt 163.62
(Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing
on or floor as directed for laying of cable. The pipes as following
size of dia & weight per 6 mtr.(B) 50 mm inner Dia.
[218] S.I.T.C. submersible pump set suitable for bore of 150 mm. dia. or 1.00 Ea. 35670.17
more having three phase motor capacity not more than 5 H.P. with
following capacity . Lifting and Lowering taken extra. (B) ( 5 stage)
410 to 350 LPM discharge at 40 to 36 mtrs. head respectively
suitable for 50mm dia. delivery pipe Cat.III
Rate (Exclusive
Item Description of Item (with brief specification and reference GST)
Quantity Unit Amount
No. to book of specifications)
[219] Lowering of submersible motor pump set at the depth of following 1.00 Per Job 1711.95
,complete with required. Nos. and size of casing pipes erected by
means of proper chain pulley block & pipe wrenches after checking
of threads of each pipe with coupling to take the load of the pump
set and pipe assembly filled up with water (A) Up to 60 mtrs.
Two Crore Seventy Six Lakh Twenty Eight Thousand Nine Hundread Seventy Four Rupees and Sixty Paisa Only
I/We am/are willing to carry out the work at…………………………………………….% above/below percent (Should be written in figures and words)
of the estimated rate mentioned above. Amount of my / our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct…………………………% below Add…………………………% Above
In Worlds In Worlds
(* Please strike out whichever is not applicable).
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which
no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design
the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate
mentioned in all the tender.
5. Credit of dismantled materials of amount of Rs. 0.00/- must be recovered from contractor's 1st R.A. bill.
6. All duties, taxes, and other levies except GST payable by the contractor under the contract, or for any other cause shall be included
in the rates, prices and total Bid Price submitted by the Bidder. (GST will be paid extra)
Dated Signature of Dy. Executive Engineer Executive Engineer
the Contractor. Panchayat (R&B) Sub Division Panchayat (R&B) Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
8.GR SBD.pdf
9.Envirement MMGSY.pdf
2a. Specification Index Rajula TP.pdf
2b. Detail Civil Specification.pdf
2c. BUILDING WORK BOOKLET.pdf
2d. SBD WTIH ELE BOOKLET.pdf
2e. Elec. Clause.pdf
2f. Elec. Memo.pdf
2g. Elec. Make list.pdf
3. BOQ Rajula TP.pdf
5. Testing Rajula TP.pdf
0.1 SBD.pdf
4. Building GR-1.pdf
4. Building GR-2.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .