REP REPLACEMENT OF EXISTING UNSV DISTRIBUTION BOARDS WITH MCB DB BOX SUB MAIN WIRING SERVICES CONNECTIONS AND REP OF INT WIRING POINT WIRING WITH FITTING LED FITTINGS SERVICE CONNECTIONS AND MISC WORKS AT MIL STN DHARAMSHALA AND CHARRI CAMP

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLSH electric cable 1100 volts cable in and including PVC casing and caping of suitable size (as per conductor run) with all fittings such as bend/corners/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core ( Green colour) cable as continuous earth wire connected to common earth dolly in existing CI/wooden/pvc box covered with 3 mm thick plastic/hylam laminated sheet for one light point/ fan/exhaust fan point/ bell point etc controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 2 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 2 above, but for one 3/5 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 2 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLSH electric cable 1100 volts cable in In PVC In stove enamelled In PVC conduit of suitable size (as per conductor run) with all fittings such as bend/corners/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (Green colour) cable as continuous earth wire connected to common earth dolly in existing CI/wooden/pvc box covered with 3 mm thick plastic/hylam laminated sheet for one light point/ fan/exhaust fan point/ bell point etc controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 6 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 6 above, but for one 3/5 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 6 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for Switch piano flush button 5 Amps complete.

M&L for Switch piano flush type single pole one way 15 Amp complete.

M&L for socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type complete.

M&L for socket outlet 2 in 1, 3 pin, 5 Amp flush type complete.

M&L for switch socket combination 2 in 1, 5 Amp and 15 Amp flush type all as specified and directed.

M&L for Switch socket combination 2 in 1, 5 A flush type all as specified and directed.

Material and labour (in replacement) for call bell ding dong AC 230 volt single pole complete all as specified.

Material and labour (in replacement) for Bell push Switch flush button single pole one way 5 Amps complete all as specified.

M&L (in replacement) for Modular switch 1 way 6A, 1 module all as specified and directed.

M&L (in replacement) for Modular switch 1 way 16A, 1 module all as specified and directed.

M&L (in replacement) for Modular socket, 6A - 2/3 pin combined 2 module all as specified and directed.

M&L (in replacement) for Modular Socket 6A/16A - 2/3 pin combined 2 module, all as specified and directed.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size complete all as specified.

M&L (in replacement) for Sub main wiring in PVC casing caping/conduit with 2 Nos single core PVC insulated copper conductor cable flame proof size 6.0 sqmm multistrand and 6.0 sqmm PVC insulated flame proof earth wire using suitable size of copper thimble all as directed

M&L (in replacement) for Sub main wiring in PVC casing caping/conduit with 2 Nos single core PVC insulated copper conductor cable flame proof size 4 sqmm multistrand and 4 sqmm PVC insulated flame proof earth wire using suitable size of copper thimble all as directed

Supply & fix in replacement of existing UNSV Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 4 way double door type withsuitable size of bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with suitable size of bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job.

Supply and fixing (in replacement) amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying capacity SP 5 to 32 Amp MCB complete with connection testing and commissioning.

Supply and fixing (in replacement) amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying capacity SPN 32 Amp MCB complete with connection testing and commissioning.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with DB’s suitable for MCBs of triple pole and neutral 4 way, 415 volt, double door type with 200 amp rated bus bar double door type with one incoming and 12 outgoing Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job.

Supply and fix in replacement of MCB TPN 63 Amp all as specified and directed.

Supplying and fixing (in replacement) 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 10sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apartincluding4mm suspension wire, one twin core cable flat or circular

Supply and fixing (in replacement) LED lights fitting 1x 18/20 watts 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing (in replacement) LED lights fitting 1x 22 watts 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

S&F in replacement LED tube rod/ultra bright tubelight 20 Watts (single side connection) with very high efficacy and best suited for installation in existing tubelight luminaire with any type of existing lamp holders to give the glare free light with lamp holder as per site requirement and as directed.

Supply and fixing (in replacement) LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Taking down exhaust fans 250/ 300/ 380/ 450 mm sweep, and then properly cleaning and greasing of bearings after opening of the fan including replacement of unserviceable parts, reassembling and reconnecting of exhaust fan all as directed. Note: - Spare parts will be measured and paid separately at 'supply only rates'.

Supply only ball bearing of exhaust fans of any size and type all as per site requirement including greasing, all as specified.

Material and labour for rewinding of exhaust fan of 225 to 300 mm sweep complete with super enameled insulated copper wire of appropriate size , including all winding, insulating material and impregnation of insulating varnish as per detail given below of any make, type, model including transportation from AGE E/M store yard to site of rewinding complete, all as directed.

All as per item No. 43 above but exhaust fan of 450 mm sweep.

Painting of exhaust fans after due preparation of surface 225/300/380/ 450 mm sweep complete at site with super enamel synthetic paint of colour as per old one by spray gun including filling cavities with filler, two coats after cleaning all dust, grease, smoke spots etc all as directed.

Taking down carefully from wall after unscrewing nut/bolts geyser 50/35/25 Ltr capacity and opening the same for taking out internal tank, syphon assembley etc and reassembling and refixing after repair all as specified and as directed by Engr-in-Charge. Note: Spares shall me measured and paid sepratley under respective items of Sch.

Supply only heating unit (element) ISI marked of 1500 watts triangular shape rating as required at site including rubber washers complete, all as specified and as directed. (As per sample) Make : Umpire/Wondercool/Ditz/ Toshiba/jRacold

All as per Serial item No 47 above but circular shape, all as specified and as directed. (As per sample) Make : Umpire/Wondercool/Ditz/ Toshiba/Racold

Supply and replacement internal steel tank of geyser 25 ltr capacity complete with syphon –assembly, 1.5 kw element , rubber gasket , thermostat switch , all as specified and directed . The tank shall be tested at site and shall be able to with stand the requisite pressure. Necessary testing equipment shall be arranged by the contractor .

Supply and replacement internal steel tank of geyser 50/35 ltr capacity complete with syphon –assembly, 1.5 kw element , rubber gasket , thermostat switch , all as specified and directed ., The tank shall be tested at site and shall be able to with stand requisite pressure . Necessary testing equipment shall be arranged by the contractor .

Supply and replace PVC connection 15mm dia complete with brass flair nuts at both ends. ( ISI marked and suitable for hot water supply upto 100 degree celcius .)

Supply and fixing Supply and fixing in replacement anchor bolt 12mmX100mm long complete all as spd and directed (Note:- Anchor bolt shall be grouted with hammer drill only)

Supply only ISI marked thermostat range 0°-75°C for the geysers of 25 to 50 Liters capacities complete, all as specified and as directed. (As per sample)

Supply for 15mm stop valve CP fancy type,cast copper alloy,screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe unions and suitable complete all as specified.

Supply only non return valve 15mm dia cast copper alloy ISI mark complete all as specified and as directed by Engineer-in-charge

Cleaning / scrapping of old paint/dust and painting of geysers of 25/35/50 litres capacity at site/ stores with two coat of super enameled painting by spray complete, all as specified and as directed.

S&F in replacement mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lenghts, with and including all fittings such as sockets,bends,elbow,unions,tees diminishing pieces etc, fixed to wall or ceiling or in floor complete all as specified and directed.

Supply and fixing (in replacement) Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified and as directed.

Supply and fixing Supply and fixing in replacement LED bldg security light 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete.

Supply and fixing (in replacement) PVC body Exhaust fan 200/250 mm sweep, 5 star rating, 230 V AC, copper binding, blades, frame and, louvers with suitable size of copper wire for connection ceilng rose to Exhaust fan including making good surface and as directed.

Taking down ceiling fan 1200/1400 mm sweep, and then properly cleaning and greasing of bearings after opening of the fan including replacement of unserviceable parts, reassembling and reconnecting of exhaust fan all as directed. Note: - Spare parts will be measured and paid separately at 'supply only rates'.

Material and labour for rewinding of ceiling fan motor 1200/1400 mm sweep any make with super enameled copper winding wire of gauge as per existing including cutting and getting out old US winding, sleeve work, varnishing with E class insulation varnish , threading ,connections with twin core copper flexible wire of size 0.0076mm of length not more than one mtr with each fan complete all as specified and directed. Material to be used as per ISI marked. (i) Fixing of repaired fan in any location of cantt area shall be contractors responsibility at his own arrangement of transport and Tand P. (ii) Old burnt wire will be contractors property and necessary credit shall be recovered as per sch of credit attached .)

Supply only ball bearing of ceiling fans of any size and type all as per site requirement including greasing, all as specified. Make: SKF/NBC/ABC

Supply only capacitor of size )2.5 to 4.5 as pe site requirement) MFD for ceiling fan/Exhaust fan all as directed and specified.

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. (M & L)

S & F (in replacement) stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd

Supply and fixing (in repair/replacement) decorative wall mounting fixture, in durable plastic body & designer mesh in any finish suitbale for 9 W lamps, three core flexible copper conductor cable, 9 W LED buld all as specified and as directed. Make- HPL, Bajaj, Havells, CG etc.

M&L Supply and fixing in replacement for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I & as directed by Engr-in-Charge

Repair/replacement for sheet metal enclosure (DB Box) of size 750x600x300mm or as per site requirement, made out of 2mm thick MS sheet suitable for fixing the MCB DB & meters, single door type with locking arrangement and reconnecting commissioning including 2 coats of synthetic enamel paint over a coat of red oxide primer to internal and external surfaces with machine spray, necessary cutting, PCC work, disturbed surfaces match to existing surface complete included in the job complete all as specified and directed by Engr-in-Charge

smc engineering company (BID ID -3353388)

JAI DURGA CONSTRUCTION CO (BID ID -3345459)

ess are electricals and electronic (BID ID -3354271)

M/s Raj Construction (BID ID -3345044)

M/S MALHI CONSTRUCTIONS (BID ID -3345926)

Him Builders (BID ID -3344945)