Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.0 LAccepted-Finance | L1 | Accepted-Finance The bidder is 1st llowest in comparative analysis of price bids of qualified bidders. | |
| 2 | L2₹2.0 L+₹2,450 (1.23%)Accepted-Finance | L2 | Accepted-Finance The bidder is 2nd llowest in comparative analysis of price bids of qualified bidders. |
Tender Value
₹1.9 L
EMD Value
₹3,876
Closing Date
21 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER(CIVIL)
O/o the Executive Engineer (C) BSNL, Civil Division, Jamshedpur at Dhanbad, 3rd floor, CTO building, Hirapur, Dhanbad-826001
Erection of 6.00 metre high 3 legged roof top pole at newly proposed site for shifting of Dhanbad Diesel BTS site at Bank More, Dhanbad.
2024_BSNL_198288_1
09/NIT/EE(C)/CDJ/2024-25
Open Tender
Civil Works
Item Rate
30 days
Bank More
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
Accounts officer (Cash), O/o GMTD, BSNL, Dhanbad
₹3,876
28 Jun 2024
13 Jun 2024
24 Jun 2024
13 Jun 2024
21 Jun 2024
13 Jun 2024
Amount
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
a) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form for :
a) Lintels, beams, plinth beams, girders, bressumers and cantilevers
b) Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing mild steel round holding down anchor bolts with nuts and washer plates complete.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
a) In cable tray, pole mount brackets etc. frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and fixing poles of approved size i/c welding of its top bore by 5 mm thick plates including applying priming coat of approved steel primer. (5 mm thick plate will be paid in basic item)
a) G.I. pipes
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
a) Two or more coats on new work.
Cutting holes up to 45 x 20 cm in walls including making good the same:
a) With common burnt clay F.P.S. (non modular) bricks.
Labour charges for lifting(externally due to narrow stairs of the building) and stacking of pole tower member, cable tray, ladder, angles section etc.on roof top with necessary rope and pulley arrangement etc. as per direction of the Engineer-in-Charge.
Labour charges for erection and fixing of pole tower structure including feeder cable tray, antenna mounts, ladder etc. on top of roof as per standard / approved drawing & scheduled i/c tightening of nuts, bolts and washer etc. The pole tower shall be fabricated for more stiffness with angle section, plates, flats etc. and fixing horizontal bracing on top, middle, bottom and at least one cross bracing in each face to all three pole leg all complete as per direction and satisfaction of the Engineer-in-Charge.
Supply of galvanised Nut bolt as per required size for pole tower as per direction and satisfction of Engineer-in-charge.
Dismantling RCC in existing roof beams & columns upto its top reinforcement at rest point of tower stem with manual Chisel and/ or by standard power driven percussion type, tapering of all edges, making square shoulders of cavities, cleaning the exposed concrete surface and reinforcement with wire brushes etc. and welding by gas or electric plant of stem's reinforcement to existing reinforcement etc. all complete as per direction of Engineer-In-Charge.
RATAN MAHTO
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .