Construction of (250 x 30 Sqm) of Shed with EOT crane (25 Tons) facility in General Stores Area of MM-stores Department (SHED 2) at Bokaro Steel Plant, Bokaro Steel City, Jharkhand

ABSTRACT OF COST

Name of the work : Construction of 250m x 30m of shed with 25 Tons EOT Crane

facility in General Store Area of MM- Stores Department (SHED-2)

S.H. No. Description of Sub-Head Amount Amount

(DSR items) (Non-DSR items)

2 Concrete Work : ₹ 91,60,679.00 -

3 Reinforced Cement Concrete : ₹ 4,97,27,093.00 -

5 Cladding Work : ₹ 11,06,835.00 -

6 Wood and P.V.C. Work : ₹ 1,79,118.00 -

11 Aluminium Work : ₹ 8,32,497.00 -

14 Fire Fighting (Fire Hydrant System) : ₹ 4,78,445.51 ₹ 3,05,010.00

15 Sanitary Fixtures & CP Brass Fittings : ₹ 80,922.76 ₹ 22,706.00

16 Soil, Waste, Vent & Rain Water Pipes : - ₹ 17,27,374.28

17 Water Supply System (Internal) : ₹ 65,957.93 -

18 External Sewerage & Storm Water Drainage : ₹ 1,72,800.58 ₹ 4,95,000.00

19 External Water Supply : ₹ 56,434.46 -

23 Supply of Equipments - ₹ 41,36,593.97

Dismantlling of existing facilities, Relocation of

pipeline, cable (Lumsum Payble)

Soil Investigation, site survey, GPR Survey

After adding cost index @ 10% as per CPWD

Included in rate

office memorandum 34(1)/cost index/

Modified Estimated Cost after using Correction

factor on DSR 2023 on account of Included in rate

Gross Total (W) ₹ 24,98,43,526.90

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES - Civil Works)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons EOT Crane facility in General Store Area

of MM- Stores Department (SHED-2 )

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Sub-Head : Earth Work

1 2.6 Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means over areas (exceeding 30cm in

depth, 1.5m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth, lead up to

50m and lift up to 1.5m,as directed by Engineer-in-Charge.

3 2.7 Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means over areas (exceeding 30 cm in

depth, 1.5m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth, lead up to 50

m and lift up to 1.5m, as directed by Engineer-in-Charge.

5 2.25 Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

exceeding 20cm in depth, consolidating each deposited 2368.22 Cum 209.78 496803.00

layer by ramming and watering, lead up to 50 m and lift up

6 2.25A Excavating, supplying and filling of local earth (including

royalty) by mechanical transport up to a lead of 5 km, also

including ramming and watering of the earth in layers not 369.22 Cum 749.75 276818.00

exceeding 20 cm in trenches, plinth, sides of foundation

etc., complete.

4 2.26 Extra for every additional lift of 1.5 m or part thereof in

excavation /banking excavated or stacked materials.

5 2.26.1 All kinds of soil.

6 2.26.2 Ordinary or hard rock.

7 2.27 Supplying and filling in plinth with sand under floors,

including watering, ramming, consolidating and dressing 1125.00 Cum 2273.05 2557181.00

8 2.34 Supplying chemical emulsion in sealed containers including

delivery as specified.

9 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 4166.67 Ltr 251.25 1046887.00

10 2.35 Diluting and injecting chemical emulsion for PRE

CONSTRUCTIONAL anti- termite treatment (excluding the

cost of chemical emulsion) :

11 2.35.3 Treatment of soil under existing floors using chemical

emulsion @ one litre per hole, 300 mm apart including

drilling 12 mm diameter holes and plugging with cement

mortar 1 :2 (1 cement : 2 Coarse sand) to match the

existing floor :

12 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1%

Total of the Sub-Head - Earth Work : 7820054.00

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Sub-Head : Concrete Work

13 4.1 Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

14 4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from

natural sources : 10 graded stone aggregate 40 mm 77.97 Cum 6976.86 544018.00

nominal size derived from natural sources)

15 4.11 Providing and laying damp-proof course 50mm thick with

cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III)

derived from natural sources : 4 graded stone aggregate 117.00 Sqm 530.60 62080.00

20mm nominal size derived from natural sources).

16 4.12 Extra for providing and mixing water proofing material in

cement concrete work in doses by weight of cement as per 45.00 units 19.43 874.00

manufacturer’s specification.

17 4.13 Providing and applying a coat of residual petroleum

bitumen of grade of VG-10 of approved quality using 1.7 kg

per square metre on damp proof course after cleaning the 130.00 Sqm 156.42 20335.00

surface with brushes and finally with a piece of cloth lightly

soaked in kerosene oil.

18 4.17 Making plinth protection 50mm thick of cement concrete

1:3:6 (1 cement : 3 coarse sand (zone-III) derived from

natural sources : 6 graded stone aggregate 20 mm nominal

size derived from natural sources) over 75mm thick bed of

dry brick ballast 40 mm nominal size, well rammed and

consolidated and grouted with fine sand, including

necessary excavation leveling & dressing & finishing the

19 4.20 Providing and laying in position ready mixed or site

batched design mix cement concrete for plain cement

concrete work; using coarse aggregate and fine aggregate

derived from natural sources, Portland Pozzolana/Ordinary

Portland/Portland Slag cement, admixtures in

recommended proportions as per IS : 9103 to accelerate/

retard setting of concrete, to improve durability and

workability without impairing strength; including pumping

of concrete to site of laying, curing, carriage for all leads;

but excluding the cost of centering, shuttering and finishing

as per direction of the Engineer-in-charge; for the following

grades of concrete.

20 Note : Extra cement upto 10% of the minimum specified

cement content in design mix shall be payable separately.

In case the cement content in design mix is more than

110% of the minimum specified cement content, the

contractor shall have discretion to either re-design the mix

or bear the cost of extra cement.

21 4.20.1 All works up to plinth level:

22 4.20.1.1 Concrete of M-10 grade with minimum cement content of

Total of the Sub-Head - Concrete Work : 9160679.00

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Sub-Head : Reinforced Cement Concrete

23 5.3 Reinforced cement concrete work in beams, suspended

floors, roofs having slope up to 15° landings, balconies,

shelves, chajjas, lintels, bands, plain window sills,

staircases and spiral stair cases above plinth level up to

floor five level, excluding the cost of centering, shuttering, 1.00 Cum 12314.34 12314.00

finishing and reinforcement with 1:1.5:3 (1 cement : 1.5

coarse sand(zone-III)derived from natural sources : 3

graded stone aggregate 20 mm nominal size derived from

natural sources).

24 5.9 Centering and shuttering including strutting, propping etc.

and removal of form for :

25 5.9.1 Foundations, footings, bases of columns, etc. for mass

26 5.9.4 Shelves (Cast in situ)

27 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

28 5.9.20 Suspended floors, roofs, landings, balconies and access

platform with water proof ply 12 mm thick

29 5.9.21 Lintels, beams, plinth beams, girders, bressumers and

cantilevers with water proof ply 12 mm thick

30 5.22 Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all

complete upto plinth level.

31 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or

32 5.22A Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all

complete above plinth level.

33 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or

34 5.30 Add for plaster drip course/ groove in plastered surface or

moulding to R.C.C. projections

35 5.33 Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced cement

concrete work; using coarse aggregate and fine aggregate

derived from natural sources, Portland Pozzolana/

Ordinary Portland/ Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, to improve durability and

workability without impairing strength; including pumping

of concrete to site of laying, curing, carriage for all leads;

but excluding the cost of centering, shuttering, finishing

and reinforcement as per direction of the engineer-in-

charge; for the following grades of concrete.

36 Note: Extra cement up to 10% of the minimum specified

cement content in design mix shall be payable separately.

In case the cement content in design mix is more than

110% of the specified minimum cement content, the

contractor shall have discretion to either re-design the mix

or bear the cost of extra cement

37 5.33.1 All works upto plinth level

38 5.33.1.1 Concrete of M25 grade with minimum cement content of

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

39 5.33.1.2 Concrete of M30 grade with minimum cement content of

40 5.33.2 All works above plinth level upto floor V level

41 5.33.2.1 Concrete of M25 grade with minimum cement content of

42 5.33.2.2 Concrete of M30 grade with minimum cement content of

43 5.35 Add for using extra cement in the items of design mix over

and above the specified cement content therein.

Total of the Sub-Head - Reinforced Cement Concrete : 49727093.00

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Sub-Head : Masonry Work

44 6.1 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in foundation and plinth in:

45 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 20.00 Cum 7633.65 152673.00

46 6.4 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above

plinth level up to floor V level in all shapes and sizes in :

47 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 320.00 Cum 9746.10 3118751.00

48 6.13 Half brick masonry with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in superstructure

above plinth level up to floor V level.

49 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 65.00 Sqm 1202.80 78182.00

50 6.15 Extra for providing and placing in position 2 Nos 6mm dia.

M.S. bars at every third course of half brick masonry.ird 65.00 Sqm 112.17 7291.00

course of half brick masonry.

Total of the Sub-Head - Masonry Work : 3356897.00

Sub-Head : Cladding Work

51 8.2 Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, jambs,

facias and similar locations of required size, approved

shade, colour and texture laid over 20 mm thick base

cement mortar 1:4 (1 cement : 4 coarse sand), joints

treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete at

52 8.2.2 Granite stone slab colour black, Cherry/Ruby red

53 8.2.2.1 Area of slab upto 0.50 sqm

54 8.2.2.2 Area of slab over 0.50 sqm

55 8.2.3 Granite stone slab all colour and texture except black,

Cherry/ Ruby red

56 8.2.3.1 Area of slab upto 0.50 sqm

57 8.2.3.2 Area of slab over 0.50 sqm

58 8.4 Extra for fixing marble /granite stone, over and above

corresponding basic item, in facia and drops of width upto

150 mm with epoxy resin based adhesive, including

cleaning etc. complete.

59 8.5 Extra for providing opening of required size & shape for

wash basin/kitchen sink in kitchen platform, vanity counter

and similar location in marble/ Granite/ stone work,

including necessary holes for pillar taps etc. including

moulding, rubbing and polishing of cut edges etc. complete

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

60 8.31 Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of steps

and dados, over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white cement

mixed with pigment of matching shade complete.

Total of the Sub-Head - Cladding Work : 1106835.00

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Sub-Head : Wood and P.V.C. Work

61 9.1 Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed and

fixed in position with hold fast lugs or with dash fasteners

of required dia & length (hold fast lugs or dash fastener

shall be paid for separately).

62 9.1.2 Sal wood

63 9.7 Providing and fixing panelling or panelling and glazing in

panelled or panelled and glazed shutters for doors,

windows and clerestory windows (Area of opening for

panel inserts excluding portion inside grooves or rebates to

be measured). Panelling for panelled or panelled and

glazed shutters 25 mm to 40 mm thick :

64 9.7.7 Float glass panes

65 9.7.7.2 5.5 mm thick glass panes (weight not less than 12.50

66 9.21 Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type, core

of block board construction with frame of 1st class hard

wood and well matched commercial 3 ply veneering with

vertical grains or cross bands and face veneers on both

faces of shutters:

67 9.21.1 35 mm thick including ISI marked Stainless Steel butt

hinges with necessary screws

68 9.23 Extra for providing lipping with 2nd class teak wood

battens 25 mm minimum depth on all edges of flush door 15.00 Sqm 494.85 7423.00

shutters (over all area of door shutter to be measured).

69 9.24 Extra for providing vision panel not exceeding 0.1 sqm in

all type of flush doors (cost of glass excluded) (overall area

of door shutter to be measured) :

70 9.24.1 Rectangular or square. 15.00 Sqm 213.15 3197.00

71 9.40 Providing and fixing wooden moulded beading to door and

window frames with iron screws, plugs and priming coat

on unexposed surface etc. complete :

72 9.40.1 2nd class teak wood

74 9.74 Providing and fixing bright finished brass tower bolts

(barrel type) with necessary screws etc. complete :

77 9.75 Providing and fixing bright finished brass door latch with

necessary screws etc. complete :

79 9.76 Providing and fixing bright finished brass 100 mm mortice

latch and lock with 6 levers and a pair of lever handles of 8.00 No. 914.73 7318.00

approved quality with necessary screws etc. complete.

80 9.82 Providing and fixing bright finished brass hanging type floor

door stopper with necessary screws, etc. complete.

81 9.127 Providing & Fixing decorative high pressure laminated

sheet of plain / wood grain in gloss / matt / suede finish

with high density protective surface layer and reverse side

of adhesive bonding quality conforming to IS : 2046 Type S,

including cost of adhesive of approved quality.

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Total of the Sub-Head - Wood And P.V.C Work : 179118.00

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Sub-Head : Steel Work

83 10.19 Providing and fixing mild steel round holding down bolts

with nuts and washer plates complete.

84 10.27 Providing and fixing carbon steel galvanised (minimum

coating 5 micron) dash fastener of 10 mm dia double

threaded 6.8 grade (yield strength 480 N/mm2), counter

sunk head, comprising of 10 mm dia polyamide PA 6 grade

sleeve, including drilling of hole in frame , concrete/

masonry, etc. as per direction of Engineer-in-charge.

Total of the Sub-Head - Steel Work : 1184501.00

Sub-Head : Flooring

86 11.41A Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade,

laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and

matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet for placing the

tiles gently and easily.

87 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

89 11.46 Providing and laying Vitrified tiles in different sizes

(thickness to be specified by manufacturer) with water

absorption less than 0.08 % and conforming to I.S. 15622,

of approved make in all colours & shade in skirting, riser of

steps, over 12 mm thick bed of cement mortar 1:3

(1cement: 3 coarse sand), jointing with grey cement slurry

@ 3.3kg/sqm including grouting the joint with white

cement & matching pigments etc. complete.

92 16.75 Providing and laying C.C. pavement of mix M-25 with ready

mixed concrete from batching plant. The ready mixed

concrete shall be laid and finished with screed board

vibrator , vacuum dewatering process and finally finished

by floating, brooming with wire brush etc. complete as per

specifications and directions of Engineer-in charge. (The

panel shuttering work shall be paid for separately). (Note:-

Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/

recoverable separately).

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

93 11.4 52 mm thick cement concrete flooring with concrete

hardener topping, under layer 40 mm thick cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) and top layer 12 mm thick

cement hardener consisting of mix 1:2 (1 cement hardener

mix : 2 graded stone aggregate 6 mm nominal size) by

volume, hardening compound mixed @ 2 litre per 50 kg of

cement or as per manufacturer’s specifications. This

includes cost of cement slurry, but excluding the cost of

nosing of steps etc. complete.

Total of the Sub-Head - Flooring : 14363315.83

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Sub-Head : Roofing

93 12.45 Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both side inclusive) as

per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at

1200 mm centre to centre, one flange fixed to the ceiling

with dash fastener 12.5 mm dia x 50 mm long with 6 mm

dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at

450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of

2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of

rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the

help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of tapered

and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides

of joint and two coats of primer suitable for board, all as

per manufacturer's specification and also including the

cost of making openings for light fittings, grills, diffusers,

cutouts made with frame of perimeter channels suitably

fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost

of painting with :

94 12.45.1 12.5 mm thick tapered edge gypsum plain board

conforming to IS: 2095- (Part I) : 2011 (Board with BIS 65.00 Sqm 1451.11 94322.00

certification marks)

Total of the Sub-Head - Roofing : 94322.00

Sub-Head : Finishing

95 13.1 12 mm cement plaster of mix :

96 13.1.2 1:6 (1 cement: 6 fine sand)

97 13.2 15 mm cement plaster on the rough side of single or half

brick wall of mix :

98 13.2.2 1:6 (1 cement: 6 fine sand)

99 13.11 18 mm cement plaster in two coats under layer 12 mm

thick cement plaster 1:5 (1 cement: 5 coarse sand) finished

with a top layer 6mm thick cement plaster 1:6 (1 cement: 6

100 13.16 6 mm cement plaster of mix :

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

101 13.16.1 1:3 (1 cement: 3 fine sand)

102 13.26 Providing and applying plaster of paris putty of 2 mm

thickness over plastered surface to prepare the surface 2175.00 Sqm 281.17 611540.00

even and smooth complete.

103 13.45 Finishing walls with textured exterior paint of required

104 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm)

over and including priming coat of exterior primer applied 1900.00 Sqm 239.32 454706.00

@2.20kg/10 sqm.

105 13.61 Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade :

106 13.61.1 Two or more coats on new work. 2000.00 Sqm 166.86 333720.00

107 13.83 Wall painting with premium acrylic emulsion paint of

interior grade, having VOC (Volatile Organic Compound )

content less than 50 grams/ litre. of approved brand and

manufacture, including applying additional coats wherever

required to achieve even shade and colour.

109 13.116 Polishing in high gloss/matt finish melamine clear polish on

wood work in required color/wooden shade texture with

following process in the sequence as detailed below:

110 1. The surface to be polished is rubbed with sand paper

80/120 no. and then with sand paper of 160/180 nos.

111 2. Applying two coats of sealer with spray gun and allowing

sufficient drying time for 1st coat and 2nd coat is allowed

to dry for 8 to 12 hrs.

112 3. On drying of sealer coat, wet rubbing with emery cloth

of finer grading with water to remove excess sealer layer

and make the surface further smooth after this wet

rubbing, then surface is applied with special grade

melamine fillers to fill all the small and big holes/grooves

etc. Filler coat to be allowed to dry for 4 to 6 hrs on which

again a light wet rubbing is done this surface is further

allowed to dry for 12 hrs.

113 4. On this, 1st coat of melamine polish is applied with

spray gun using melamine clear polish and melamine

thinner in required proportion. This 1st coat is allowed to

dry for 24 hrs then this dry surface is again fine wet rubbed

smooth, which is further allowed to dry for 12 hrs. The

final melamine polish is applied with compressor pressure

spray gun using melamine clear polish and melamine

thinner mixed in required proportion complete as per

direction of Engineer-in-Charge. (Finalo coat to be done in

1 or 2 layers without gap of time.)

Total of the Sub-Head - Finishing : 3590515.00

Digitally signed by PRIYA

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Sub-Head : Aluminium Work

114 21.1 Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up standard

tubular sections/appropriate Z sections and other sections

of approved make conforming to IS: 733 and IS: 1285,

fixing with dash fasteners of required dia and size,

including necessary filling up the gaps at junctions, i.e. at

top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth,

rust free, straight, mitred and jointed mechanically

wherever required including cleat angle, Aluminium snap

beading for glazing / paneling, C.P. brass/ stainless steel

screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and

dash fasteners to be paid for separately) :

115 21.1.1 For fixed portion

116 21.1.1.2 Powder coated aluminium (minimum thickness of powder

coating 50 micron)

117 21.1.2 For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

for fixing of fittings wherever required including the cost of

EPDM rubber / neoprene gasket required (Fittings shall be

paid for separately).

118 21.1.2.2 Powder coated aluminium (minimum thickness of powder

coating 50 micron)

119 21.3 Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber /

neoprene gasket etc. complete as per the architectural

drawings and the directions of engineer-in-charge . (Cost of

aluminium snap beading shall be paid in basic item):

120 21.3.3 With float glass panes of 8 mm thickness (weight not less

than 20 kg/sqm)

121 21.11 Providing and fixing stainless steel (SS 304 grade)

adjustable friction windows stays of approved quality with

necessary stainless steel screws etc. to the side hung

windows as per direction of Engineer-in-charge complete.

123 21.15 Providing and fixing aluminium casement windows

fastener of required length for aluminium windows with

necessary screws etc. complete.

124 21.15.2 Powder coated minimum thickness 50 micron aluminium.

Total of the Sub-Head - Aluminium Work : 832497.00

125 MR Dismantlling of existing facilities, Relocation of pipeline,

cable (Lumsum Payble) 1.00 job 953249.99 953249.99

126 MR Soil Investigation, site survey, GPR Survey

Digitally signed by PRIYA

NAME OF WORK: Construction of 250mx30m of shed with EOT Crane facility in General Store Area of MM- Stores Department (SHED - 2)

NAME OF WORK - CONSTRUCTION OF ROAD WORK

SCHEDULE OF QUANTITIES

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

1 2.3 Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering,

rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and

top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for

roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :

3 2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-

5 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of 4204.429 Sqm 18.84 79200.00

girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to

a distance of 50 m outside the periphery of the area cleared.

6 16.1 Preparation and consolidation of sub-grade with power road roller of 8 to 12 tonne capacity 4181.071 Sqm 234.29 979577.50

after excavating earth to an average of 22.5cm depth, dressing to camber and consolidating

with road roller including making good the undulations etc. and re-rolling the sub-grade and

disposal of surplus earth lead upto 50 mtr.

7 16.2 Extra for compaction of earth work in embankment under optimum moisture conditions to give 2102.214 Cum 26.60 55912.50

at least 95% of the maximum dry density

8 16.3 Supplying and stacking at site:

9 16.3.1 90 mm to 45 mm size stone aggregate. 700.74 Cum 2245.92 1573800.00

10 16.3.2 63 mm to 45 mm size stone aggregate. 437.96 Cum 1751.06 766898.44

11 16.3.3 53 mm to 22.4 mm size stone aggregate. 350.37 Cum 1971.81 690862.50

12 16.3.6 Stone screening 13.2 mm nominal size (Type A). 175.18 Cum 2177.36 381440.63

15 16.30 Providing and applying tack coat using hot straight run bitumen of grade VG - 10 including

heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on

bitumen boiler, cleaning and preparing the existing road surface as per specifications :

16 16.30.2 On bituminous surface @ 0.50 Kg / sqm. 3503.69 Sqm 51.59 180750.00

17 16.55 Providing and laying bituminous macadam using crushed stone aggregate of specified grading

premixed with bituminous binder, transported to site by tippers, laid over a previously

prepared surface with paver finisher equipped with electronic sensor to the required grade,

level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per

specifications to achieve the desired compaction and density, complete as per specifications

and directions of Engineer-in-Charge.

18 16.55.1 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% 350.37 Cum 9103.60 3189619.00

(percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH

19 16.57 Providing and laying Bituminous concrete using crushed stone aggregates of specified grading

premixed with bituminous binder and filler, transporting the hot mix to work site by tippers,

laying with paver finisher equipped with electronic sensor to the required grade, level and

alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the

desired compaction and density as per specification, complete and as per directions of Engineer-

20 16.57.1 40/50mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of 175.18 Cum 12978.67 2273663.00

total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch type Hot

Mix Plant of 100-120 TPH capacity.

21 16.33 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2mm and

11.2mm size respectively per 100 sqm and 52 kg. and 56 kg. of hot bitumen per cum of stone

chippings of 13.2mm and 11.2mm size respectively including a tack coat with hot straight run

bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete : (Tack

coat to be paid for separately).

22 16.33.2 With paving Asphalt grade VG - 30 with no solvent 3503.69 Sqm. 315.68 1106062.50

23 16.47 Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish

with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning

the surface of all dirt, scales, oil, grease and other foreign material etc. and lining outcomplete.

24 16.47.1 New work (Two or more coats) 467.16 Sqm 201.43 94100.00

Digitally signed by PRIYA

NAME OF WORK: Construction of 250mx30m of shed with EOT Crane facility in General Store Area of MM- Stores Department (SHED - 2)

NAME OF WORK - CONSTRUCTION OF ROAD WORK

SCHEDULE OF QUANTITIES

Sl. No Description of Item Quantity Unit Rate (Rs) Amount(Rs)

16.43 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways,

using cement content as per design mix, using coarse sand and graded stone aggregate of 40

mm nominal size in appropriate proportions as per approved & specified design criteria,

providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and

compacting mechanically by using needle and surface vibrators, leveling to required slope/

25 camber, finishing with required texture, including steel form work with sturdy M.S. channel

sections, curing, making provision for contraction/ expansion, construction & longitudinal joints

(10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with

approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of

joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).

Note: Cement content considered in M-30 is @ 340Kg/Cum. Excess/Less cement used as per

design mix is payable, recoverable separately.

16.43.2 Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to 67.74 Cum 11878.67 804638.00

site in transit mixer.

16.44 Extra for providing and mixing hardening compound of approved quality as per manufacturer's 42.05 Ltr 59.40 2498.00

specification in cement concrete.

29 16.45 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements 467.21 units 5.67 2650.00

after making the joints dust free with high pressure air jet cleaners, all complete as per

direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot

sealing compound impregnated fibre board having impregnation more than 35%, conforming

to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)

30 16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path,

park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/

shape, made by table vibratory method using PU mould, laid in required colour & pattern over

50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter

locking paver blocks into the sand bedding layer through vibratory compaction by using plate

vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern,

finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction

of Engineer in-Charge.

31 16.91.1 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & 878.26 Sqm 1119.16 982911.00

Total of the Sub-Head - Road Work : 13917545.56

Digitally signed by PRIYA

Name of Project : Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores

Department (SHED-2)

Name of Work : FIRE FIGHTING WORK

S.I MR DSR 2022 DSR 2022 MR

Description of Item Unit Total Qty

No Item No Item No Rate Amount Rate Amount

SUBHEAD I:FIRE HYDRANT SYSTEM

Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

1 18.7 gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint

of required shade complete as required :

Supplying and fixing single headed internal hydrant valve

with instantaneous Gunmetal/Stainless Steel coupling of 63

2 18.9 mm dia with cast iron wheel ISI marked conforming to IS 5290

(Type -A) with blank Gunmetal/Stainless teel cap and chain as

2.1 18.9.1 Single Headed Gunmetal Each 10 8183.514 ₹ 81,835.14

Supplying, fixing, testing and commissioning of butterfly valve

3 18.11 of PN 1.6 rating with bronze/gunmetal seat duly ISI

conforming to IS 13095 of following sizes as required :

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with

63 mm dia male and female couplings duly bound with GI

wire, rivets etc. conforming to IS 636 (type-A) as required:

Supplying and Fixing First Aid Hose Reel, wall mounting

swinging type complete with drum & bracket of MS

8 18.17 construction, spray painted in Post office Red, confirming to IS

884/1995 with upto date amendments, complete with the

following as required.

20 mm nominal internal dia as per IS 12585 water hose

thermoplastic (Textile reinforced)Type II as per IS: 12585

20 mm dia. ball valve & nozzle.

Drum and brackets for fixing the equipments on wall.

Connection from riser with 25 mm dia gun metal stop valve

and M.S pipe as reqd.

Supplying & fixing 63 mm dia gun metal short branch pipe

with 20 mm nominal internal diameter size nozzle conforming

to IS 903 suitable for instantaneous connection to

interconnect hose pipe coupling as required:

Supplying and fixing orifice plate made out of 6 mm thick

stainless steel(Grade 304) with orifice of required size to be

10 18.13 fitted between flange &landing valve of external and 10 1413.866 ₹ 14,138.66

internal hydrants to reduce presure at the outlet to the level

of 3.5 kg/sq.cm complete as required. Each

Providing and fixing standard fire man's axe with heavy duty

insulated rubber handle. Each 846.00 ₹ 8,460.00

Providing and fixing fire hose cabinet fabricated from 16

gauge M.S. Sheet with single or double glazed front door (with

13 MR 13 4 mm thick glass) and locking arrangement, painted fire red

with stove enamelled paint "FIRE HOSE" written on front

including necessary supports approximate size.

Providing and fixing dial type pressure gauge with isolation

cock and pipe at hydrant station.

14.1 MR 14.1 Diameter 100 mm calibration 0-8 Kg. Each 10 760.00 ₹ 7,600.00

Digitally signed by PRIYA

Providing and fixing CO2 type fire extinguishers with steel

15 MR 15 cylinder with a discharge valve and conforming to IS:15683. Each 35 3805.00 ₹ 1,33,175.00

Extinguishers shall be painted with rex enamel paint and fixed

to wall with brackets capacity 4.5 Kg.

Providing and fixing ABC powder type fire extinguisher

suitable for inverted operation and fabricated from 1.6 mm

M.S. sheet internally protected with anticorrosive treatment

and hydraulically tested to a pressure of 25 Kg/Sqcm.

Extinguishers externally painted with red enamel and fixed to

wall with brackets complete with internal charge and spanner

(Conforming to IS:15683 capaicity 6 KG.).

Digitally signed by PRIYA

Name of Project : Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No Item No Item No Rate Amount Rate Amount

SUBHEAD-I(Sanitary Fixtures & CP Brass Fittings)

1 17.3 Providing and fixing white vitreous china pedestal type water

closet (European type) with seat and lid, 10 litre low level

white vitreous china flushing cistern & C.P. flush bend with

fittings & C.I. brackets, 40 mm flush bend, overflow

arrangement with specials of standard make and mosquito

proof coupling of approved municipal design complete,

including painting of fittings and brackets, cutting and making

good the walls and floors wherever required :

1.1 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid Each 3 6973.59 20920.78

2 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making

good the walls wherever require:

2.1 17.7.2 White Vitreous China Wash basin size 630x450 mm with a Each

single 15 mm C.P. brass pillar tap

3 17.22A Providing and fixing CP Brass 32 mm size Bottle Trap of Each

approved quality & make and as per the direction of Engineer- 7.616011256 1107.55 8435.09

4 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen

sink as per IS:13983 with C.I. brackets and stainless steel plug

40 mm, including painting of fittings and brackets, cutting and

making good the walls wherever required:

4.1 17.10.1 Kitchen sink with drain board

5 MR 1 Fixing of 15 mm C.P brass wall mounted mixing fittings Each

swinging spout for sink complete including cutting and

making good the walls where required. (Pantry, Kitchen,

Coffee-Break etc.)

6 17.4 Providing and fixing white vitreous china flat back or wall

corner type lipped front urinal basin of 430x260x350 mm and

340x410x265 mm sizes respectively with automatic flushing

cistern with standard flush pipe and C.P. brass spreaders with

brass unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls and

floors wherever required :

6.1 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing Each 2

7 MR 2 Providing and fixing in postion storage type automatic electric

water heater pressure type thermostatically controlled, single

phase wall mounted of approved make (to the approval of

Engineer-in-charge) with thermostats, inner container of

stainless steel, Inner glass lining with B-Rating minimum 3

stars complete with 1 Mtr. three core flexible cord with plug,

non return valve and pressure release valve complete

including fixing and testing complete in all respect.

7.1 15 litre capacity water heater Each 1 13470.00 13470

8 MR 3 Providing & fixing in position Water Cooler without Stablizer

of approved make (to the approval of Engineer-in-charge )

including carriage complete in all respect.

Water Cooler Full Steel Body 40 ltr Capacity without Stablizer

9 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube Each

upto 1 metre long with S.S. triangular plate to Eureopean type

W.C. of quality and make as approved by Engineer - in -

10 18.53 Providing and fixing C.P. brass angle valve for basin mixer and Each

geyser points of approved quality conforming to IS:8931 14 614.67 8605.43

11 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin

11.1 17.28.2 Flexible pipe

Digitally signed by PRIYA

12 MR 4 Providing & Fixing in position C.P. Brass coat hook of

approved make (to the approval of Engineer-in-charge ) fixed

into wall with C.P. brass screws and rawl plugs etc. complete

in all respect.

12.1 C.P.Brass coat hook Each 4 962.00 3848

13 17.31 Providing and fixing 600x900 mm beveled edge mirror of Each 2

superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass

screws and washers complete.

14 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 Each 2

mm long, 200 mm wide with minimum distances of 37 mm

from wall face with concealed fittings arrangement of

approved quality and colour, weighing not less than 88 gms.

15 17.71 Providing and fixing PTMT liquid soap container 109 mm Each 2

wide, 125 mm high and 112 mm distance from wall of

standard shape with bracket of the same materials with snap 180.19 360.37

fittings of approved quality and colour, weighing not less than

SUBHEAD II(Soil, Waste, Vent & Rain Water Pipes)

16 MR 1 Supply, installation , testing commissioning of PP Mineral

filled low noise Soil & Waste system as per EN 12056,

with density 1.9 g/cm3. PP mineral(Astolan) filled Low noise

system should has a fire classification DIN 4102-

B2/EN13501 . Product should have a chemical resistance of

pH 2-12 and is a complete sound protection system

according to DIN 4109. including with push fit rubber ring

sockets all necessary fittings and specials such as Bends,

junctions, offsets & vent cowl. Fixing at wall/ceiling level

supported by rubber line bracket & hangers etc. duly epoxy

coated. Cutting, chases/holes in floors / walls /

slab.Compliant with LABC. Weight mass per unit area of

DN100MM should not be less than 110.07kg/m3. sound

levels of not more than 15dBA as per EN 14366 at a flow

rate of 4 l/s.including all core cut ,chases ,cutting making

holes in all wall and floor as required complete in all respect.

17 MR 2 Providing fixing, testing and commissioning in position Solfit

SWR uPVC PIPE TYPE-B pipe comforming to IS:13592

including all fittings such as bends, junctions, inspection doors,

offests, cowl, access pieces/clean out plugs, clamps /supports/

hangers etc. jointing with PVC Adhesive joints including

cutting holes in walls, core cutting in slabs and making good

the same. All complete as per specification and direction of

E/l.(For rainwater piping)

18 MR 3 Providing Fixing straight /offset type single body push fit type WC

pan connector with factory supplied spring loaded seal

guard with integral single mould sealing fins made of flexible 800.00 3200

EVA body, including bush/adaptor as supplied with the pan

connector (if required). Each 4

Providing and fixing floor drain (FD) with 50mm/40mm outlet

and one 40mm inlet for waste, with SS grating (adjustable 450.41 900.8247385

height), having 50mm water seal and in-built NRV

20 MR 5 Providing and fixing PP/UPVC trap of self cleansing design with

screwed down or hinged grating with or without vent arm complete,

including cost of cutting and making good the walls and floors :

20.1 MR 5.1 100 mm inlet and 100 mm outlet

20.1.1 MR 5.1.1 Sand cast iron S&S as per IS: 3989 Each 6 3986.29 23917.76993

21 MR 6 Providing and fixing PP/UPVC grating with Cockroach proof

strainer of approved design including setting in floor with

cement motor to match with floor finish as per architect

requirement suitable for waster and FT.

22 MR 7 Providing and fixing PP/UPVC brass grating with frame of

approved design including setting in floor with cement motor

to match with floor finish as per architect requirement.

Digitally signed by PRIYA

23 MR 8 Providing and fixing PP/UPVC extention piece for 100 mm dia

floor trap formed out of main pipe with multiple side inlets,

suitable for various dia pipes including all fixtures as required 2508.45 15050.69425

complete as per drawing approved sample and direction of

engineer in charge. Each 6

24 MR 9 Providing and fixing cast PP floor clean out plug with

suitable insert keys for opening, male threaded joint with

threaded socket drip seal to soil / waste pipe as required 1769.53 7078.104273

complete as per drawing approved sample and direction of

engineer in charge. Each 4

24.1 MR 9.1 Size 100 mm X 100 mm

SUBHEAD III(Water Supply System(Internal))

26 18.8 MR 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings and fixing

the pipe with clamps at 1.00 m spacing. This includes jointing

of pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making good

the walls etc(inside building)

26.1 18.8.1 15 mm nominal dia Pipes Mtr 15 532.80 7991.93

26.2 18.8.2 20 mm nominal dia Pipes Mtr 20 575.39 11507.87

26.3 18.8.3 25 mm nominal dia Pipes Mtr 65 671.35 43637.47

28 18.18 Providing and fixing ball valve (brass) of approved quality,

High or low pressure, with plastic floats complete :

28.1 18.18.1 15 mm nominal dia Pipes Each RO 435.45

28.2 18.18.2 20 mm nominal dia Pipes Each 1 495.01 495.01

28.3 18.18.3 25 mm nominal dia Pipes Each 2 496.67 993.35

29 18.17 Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) :

SUBHEAD IV(External Sewerage & Storm Water Drainage)

34 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.

pipes with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete :

Providing, laying and jointing glazed stoneware pipes class SP-1

with stiff mixture of cement mortar in the proportion of 1:1 (1

cement : 1 fine sand) including testing of joints etc. complete :

36 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1

cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1

cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20

mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4

coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal

size), inside plastering 12 mm thick with cement mortar 1:3 (1

cement : 3 coarse sand) finished with floating coat of neat cement

and making channels in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement complete as per

standard design :

36.1 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with

frame (light duty) 455x610 mm internal dimensions, total weight of

cover and frame to be not less than 38 kg (weight of cover 23 kg

and weight of frame 15 kg) :

36.2 19.7.1.2 With Sewer bricks conforming to IS : 4885 Each 6 13605.44 81632.64

37 19.4 MR 6 Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with water tight

C.I. cover with frame of 300 x 300 mm size (inside) the weight of

cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design:

37.1 19.4.1 MR 6.1 100x100 mm size P type

37.2 19.4.1.1 MR 6.1.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 2

38 MR 7 Constructing catch basin 45x45 cm with bricks in cement

mortar 1:4 (1 cement : 4 coarse sand) including 500x450

mm pre-cast R.C.C. horizontal grating with frame complete

as per standard design :

38.2 MR 7.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 110

Digitally signed by PRIYA

Providing orange colour safety foot rest of minimum 6 mm thick

plastic encapsulated as per IS : 10910, on 12 mm dia steel bar

conforming to IS: 1786, having minimum cross section as 23

mmx25 mm and over all minimum length 263 mm and width as

165 mm with minimum 112 mm space between protruded legs

having 2 mm tread on top surface by ribbing or chequering besides

necessary and adequate anchoring projections on tail length on

138 mm as per standard drawing and suitable to with stand the

bend test and chemical resistance test as per specifications and

having manufacture’s permanent identification mark to be visible

even after fixing, including fixing in manholes with 30x20x15 cm

cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded

stone aggregate 20 mm nominal size) complete as per design.

40 19.21 MR 9 Making connection of drain or sewer line with existing

manhole including breaking into and making good the walls, floors

with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) cement plastered on

both sides with cement mortar 1:3 (1 cement : 3 coarse sand),

finished with a floating coat of neat cement and making necessary

channels for the drain etc. complete :

40.1 19.21.1 For pipes 100 to 250 mm diameter Each 2 867.42 1734.85

SUBHEAD V(External Water Supply)

41 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including

trenching and refilling etc.

42 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive

bitumastic paint of approved quality :

Fixing water meter and stop cock in G.I. pipe line including cutting

and threading the pipe and making long screws etc. complete (cost 869.40 1738.81

of water meter and stop cock to be paid separately). Each 2

44 18.37 Constructing masonry Chamber 60x45x50 cm inside, in brick work

in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter

complete with C.I. double flap surface box 400x200x200 mm

(inside) with locking arrangement and RCC top slab 1:1.5:3 mix (1

cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm

nominal size), including necessary excavation, foundation concrete 10380.36 20760.72

1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm

nominal size) and inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12 mm thick, finished with a floating coat

of neat cement complete as per standard design :

Digitally signed by PRIYA

NAME OF WORK: Construction of 250mx30m of shed with EOT Crane facility in General Store Area of MM- Stores Department (SHED - 2)

PEB WORK DETAIL

Sl. No Item No Description of Item Quantity Unit Rate Amount

1 NS -22 Built-up sections are made from hot rolled plates conforming to ASTM A-572 Grade 50/ IS :2062

E350 (Min Yield strength 345 MPa) steel or equivalent Grade steel. Alkyd based direct to metal

paint shall be applied in plant with an average dry film thickness of 90 micron on all finished

structural steel. At site, only touchup will be done with paint of same specification and colour

against any transportation and handling scratches / damages. Hot rolled sections are mill sections

complying with IS:2062 Grade E 250 steel ( Min. Yield

strength 240 MPa).

ERW pipes are as per IS:1161 Grade YST 210/240 ( Min. Yield Strength 210 Mpa / 240 Mpa).

Channels for crane beams/ Gantary Girder (all Complete) are mill formed sections conforming to

IS:2062 Grade E250 steel (Min Yield strength 240 MPa). Galvanized cold formed sections of 683.43 M.T 1,10,000.00 ₹ 7,51,77,531

thickness 2.0 mm are made from galvanized coils as per ASTM A 653 Structural steel ( SS) Grade

50 Class 1 / IS :277 GP 350 (Min. Yield strength 345 Mpa).

Bracing rods are made from steel bars conforming to IS:2062 Grade E 250 (Min. yield strength of

Lateral bracing angle+B35s ( galvanized ) are made from steel coils conforming to ASTM A 653

Structural steel ( SS) Grade 50 Class 1 ( Min. Yield strength 345 Mpa ) / IS :277 GP 350 . Lateral

Bracing rods conforming to IS: 2062 Grade E 250 ( Minimum yield strength 240mpa ) can be used.

2 NS -23 Providing and fixing 0.58mm TCT Standing Seam Profile sheeting for roofing of same colour as

per exsisting (RAL), comprising zinc aluminium alloy coated steel of base metal thickness of 0.53

mm having yield strength of min. 300 MPa and zinc aluminium coating of 150 gsm as per AS :

1397 (total of both sides) and permanently colour coated with 20 microns SDP Colour Coating

over a 5 micron primer and back coat of 5 micron over a 5 micron primer coat. The Standing Seam 8250.00 SQM 1,100.00 ₹ 90,75,000

roofing features a unique concealed clip made from GI, one portion of the clip (lower) is fastened

to the steel structure (purlin) and the upper part gets attached to the roofing sheet. Thereafter the

sheet panel along with concealed clip is crimped / locked together by a mechanical zipping

machine and provides an absolutely puncture less roof.

3 NS -24 Rockwool Insulation for roof area as per IS: 8183 in roll form without or with a vapour barrier (foil

scrim Kraft (FSK). Rock wool insulation density shall not be less than 48 Kg/m3. Also below the 8250.00 SQM 350.00 ₹ 28,87,500

insulation weldmesh is required 75x75x2mm.

4 NS-25 Providing and fixing 2mm thick “C” profiled Polycarbonate sheet as Skylight with suitable metal

capping. The Skylight shall be fixed to the standing seam roofing as per design, drawing all 430.00 SQM 1,200.00 ₹ 5,16,000

complete as per manufacturers specifications and for all heights and levels.

5 NS-26 Providing and fixing 3mm thick prepainted MS gutters with 2mm thick FRP lining of required size

over the already provided structural support with suitable down pipes at distances mentioned all 825.00 RMT 7,200.00 ₹ 59,40,000

complete as per design & drawing.

6 NS-27 Providing and fixing PVC downtake pipe at distances mentioned all complete as per design &

7 NS-28 Providing and fixing permanently colour coated profile sheets of the same colour as per exsisting

(RAL) of depth 28 - 30 mm at minimum 195 - 200 mm pitch distance to the girt and fixed with self

drilling galvanized fasteners. Profiled sheets shall be min. 0.5mm TCT high tensile Zinc aluminium

alloy coated steel sheet having yield strength of 550 MPa with a coating mass of 150 gsm zinc-

aluminium coating total of both sides as per AS 1397 : 1993 and finished with 20 microns colour

coating of SDP paint coat on exposed surface over a primer coat of 5 microns of approved colour

and a back coat of 5 microns on reverse side over a 5 microns primer coat. There shall be 2 small 7500 SQM 820.00 ₹ 61,50,000

ribs between the profiles to give additional strength. The sheet to be fixed over the girts with

hexagonal head self drilling fasteners including neoprene / EPDM washer on each crest of

sheet. The work shall include, erection of all fasteners, flashing etc. made out of 0.5mm colour

coated zinc aluminium alloy coated steel of same specs as above. The profile steel sheets shall

conform to IS: 513, 277 & 14246. Make - TATABluescope

8 NS-29 Rockwool Insulation for roof area as per IS: 8183 in roll form without or with a vapour barrier (foil

scrim Kraft (FSK). Rock wool insulation density shall not be less than 48 Kg/m3. Also below the 7500 SQM 350.00 ₹ 26,25,000

insulation weldmesh is required 75x75x2mm

9 NS-30 Interarch VL-2 type fixed louvers shall be manufactured out of 0.5mm TCT SDP coated Galvalume

sheet in white colour with insect screen and is supplied in standard modules of 1500 mm wide x 320 SQM 4200.00 ₹ 13,44,000

Total carried over to summary: ₹ 10,51,85,031.00

Digitally signed by PRIYA

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department (SHED-2 )

Sl. No Item Description of Item Quantity Unit Rate Amount

Supply, Installation, Testing & Commissioning of of Double Girder Box Type E.O.T. (Electric

Overhead Travelling) Crane running on same Bay and same level, Box Type Fabrication having Rated

Capacity 25 Tons (Main) / 10 Tons (Auxiliary.) (Safe Working Load) having Span 30 meters and lift

height 9 meters (Adjustable as per site conditions) is a robust and high-performance lifting solution 2 No ₹ 69,12,467.00 ₹ 1,38,24,934.00

engineered for heavy-duty industrial applications. Designed in accordance with IS 807 and IS 4137

standards, this crane offers superior durability, operational efficiency, and safety including Square Bar for

Construction & Components: Main Girder - Box-type fabricated from high-grade MS plates as per IS

3177, End Carriage - Fabricated to IS 800 and IS 807 standards for structural integrity, Wire Rope - 16

mm diameter, 6x36 construction, Usha Martin make, Hook: Swiveling C-type hook as per IS 3815, pulley-

mounted, Full Platform provided on one side, Electrically powered trolley

Operational Details: Fall Configuration: 25 T Main Hoist Wire Rope: 16 mm, 6 x 36 construction, 8-

falls system, 10 T Aux. Hoist Wire Rope: 16 MM, 6 x 36 construction, 4-falls system, Hoist Duty Class:

Class 2 as per IS 3177 / IS 807, Performance Speeds: Main Hoisting Speed: 0.3 – 3.0 m/min, Cross

Travel Speed: 1.5 – 20 m/min, Long Travel Speed: 0.2 – 20 m/min

Operation Control: Crane can be move manualy (cabin for crane operator) or by usingFloor-level

pendant push button station (independently moving) with emergency stop and wirelessly by using radio

remote control (RRC) operating system

Crane Electrical Control Panel: Mounted on the bridge platform in an IP44 enclosure.Houses Variable

Frequency Drives (VFD) for all motion drives to ensure smooth acceleration and dual-speed operation,

equipped with Schneider Switchgear components,Cross Travel (CT) power fed via a flexible Festoon

Cable system, Fitted with limit switches for Hoisting, Cross Travel, and Long Travel.

Drive & Motor Details: Motor Type: Squirrel Cage Induction Motor, Crane Duty (3-phase),

Foot/Flange/Face Mounted, Motor Ratings: Hoisting: Mimimum 30 H.P.(Main) & 10 H.P. (Aux.), Cross

Travel: 3 H.P. x 2 ,Long Travel: 5 H.P. x 2 nos, Braking System: Hoisting: EHT Thruster Brake, Cross &

Long Travel: DC Brakes, Gearbox & Mechanism: Heavy-duty, totally enclosed helical gearboxes with

splash lubrication (alloy steel helical gears, stress-relieved MS body), Hook: Swiveling C-type Hook with

NS-31 pulley (IS 3815) using alloy steel components. Additional Features: Rope Drum: Made from MS

seamless pipe, Control Panel: In-house make with Schneider components, IP 44 rated, mounted on an

accessible platform, Platform: Full platform provided on one side, Travel Mechanism: Electrically

powered trolley, Wheels: LT & CT Wheels: Double flanged wheels made of En8/En9 steel (Hardness:

200–250 BHN), 250 mm dia, flanged, Paint & Finish: Two coats of primer followed by two coats of golden

yellow paint (RAL 1004) ensure long-lasting corrosion resistance and aesthetics. (RYBG long travel power

On-Ground & Facility Electrical Systems

1. Main Incomer Power & Floor Switchgear.

Main Wall-Mounted Incomer Switch/MCCB: A 3-phase, 415 V, 50 Hz, 125 A–160 A MCCB panel with

an isolated door-interlocked Isolator Switch, installed at ground level near the center or start of the 250

Ground Isolation Emergency Stop: An easily accessible lockable Isolator Switch at floor level to de-

energize the entire crane runway during maintenance.

2. Long Travel Power Conductor System (DSL System)

4-Pole Shrouded/Insulated DSL Conductor Bars (RYBG): A 250-meter long Down-Shop Lead (DSL)

shrouded busbar system running along the gantry girder rail (R-Y-B Phases + Earth) rated for a

minimum of 125 A–200 A.

Center Power Feed Terminal: Located at the 125 m mark of the 250 m run to minimize voltage drop

along the runway.

Current Collectors: Heavy-duty spring-loaded dual current collector arm assemblies mounted on the

crane's end carriage.

3. Ground-to-Gantry Power Wiring & Cabling

Main Feed Cable: Armored XLPE insulated 4-Core Copper/Aluminum cable (minimum $3.5\text{C}

\times 35\text{ sq.mm}$ or $50\text{ sq.mm}$) laid from the main floor electrical panel to the DSL

busbar power feed box.

Containment: Heavy-duty GI cable trays, rigid conduits, or underground trenches running up the bay

column to the gantry level.

4. Grounding & Earthing System

Dedicated Earth Pit: Minimum 2 dedicated chemical/copper plate earthing pits (< 2 Ohms earth

Earth Conductor: Twin continuous 25 x 3 mm GI earthing flats running from the floor earth pits to the

crane gantry structure and connected directly to the protective conductor of the DSL system.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

A SCHEDULE ITEMS

WIRING AND SUB MAINS

Wiring for light point/ fan point/ exhaust fan point/ call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

surface / recessed heavy class Steel conduit, with modular switch,

modular plate, suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as

required.a) Group C

Wiring for MCB Controlled light point/ fan point/ exhaust fan point/ call

bell point with 2.5 sq.mm FRLS PVC insulated copper conductor single

core cable in surface / recessed FRLS Heavy Duty PVC conduit, and

earthing the point with 2.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.(Cost of MCB not to be

included in this item)

a 1.14.2 x10 Primary Point Points 63 2943.33 185429.48

b 1.14.2 x4 Loop Point Points 564 1177.33 664014.12

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed Steel conduit,

3 1.2 2 way modular switch, modular plate, suitable GI box and earthing the Point 2 1964.00 3928.00

point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc as required

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed Steel conduit

alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single

core cable for loop earthing as required

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed Steel conduit

alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor

single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the

6 1.7 following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed Steel conduit as required.

a 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire metre 100 394.94 39494.07

b 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire metre 10 458.09 4580.88

b 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire metre 10 630.41 6304.07

d 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire metre 5 759.91 3799.57

e 1.7.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire metre 35 988.96 34613.50

f 1.7.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire metre 600 1247.97 748781.88

g 1.7.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire metre 400 1760.64 704257.40

Supplying and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providing and fixing 3 pin 5/6

7 1.31 amps modular socket outlet and 5/6 amps modular switch, connection Each 6 510.53 3063.20

etc. as required. (For light plugs to be used in non residential

Supplying and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providing and fixing 6 pin

15/16 amps modular socket outlet and 15/16 amps modular switch,

connection etc. as required.

9 Supplying and fixing of following modular switch/ socket outlet on the

5/6 ampsModular

switch plate & switch including connection but excluding

b 1.24.4 3 pin 5/6 amp socket outlet Each 10 130.58 1305.77

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

d 1.24.5 6 pin 15/16 amp socket outlet Each 2 210.85 421.70

e 25 amp switch Each 1 214.06 214.06

10 1.27 Supplying and fixing following size/ modules, GI box Boxes alongwith

1 or 2 Module cover plate for modular switches in recess etc as

11 2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket

outlet, with 2 pole and earth, metal enclosed plug top along with 20

amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or

in recess, with chained metal cover for the socket out let and Each 1 1734.96 1734.96

complete with connections, testing and commissioning etc. as

12 1.25 Supplying and fixing stepped fan regulator on the existing modular

plate switch box including connections but excluding modular plate etc. Nos. 6 394.94 2369.64

13 MR Supplying and fixing of 16 SWG M.S. Fan Box 12.5" Rod but without

fan cover (hylam sheet). as required.

14 MR Supplying and fixing of fan cover (hylam sheet).on the existing Fan

Box as required.

15 Supplying and fixing of modular Blanking plate on the existing modular

plate & switch box excluding modular plate etc. as reqd.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

16 1.24 Supply and fixing following modular switch/socket on the existing

modular plate and cover plate & switch box including connections but

excluding modular plate etc. as required.

a 1.24.6 Telephone socket outlet. (RJ - 11) Each 5 158.40 792.02

b 1.24.7 TV antenna socket outlet Each 1 158.40 158.40

17 1.27 Supplying and fixing following size/modules, GI box along with modular

base and cover plate for modular switches in recess etc as required.

19 1.18 Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated

copper conductor, unarmoured telephone cable in the existing surface

/ recessed steel / PVC conduit as required.

20 1.27.1 Supply, laying, testing and commissioning of the following co-axial

PVC insulated conductor cable in existing surface / recessed conduit

etc. and including making terminal joints, complete as required.

21 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing

surface/ recessed Steel/ PVC conduit/ raceway as required.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Supplying and fixing of following sizes of steel conduit along with

accessories in surface/recess including painting in case of surface

conduit, or cutting the wall and making good the same in case of

recessed conduit as required.

Supplying and fixing of following sizes of heavy class PVC conduit

23 1.21 along with accessories in surface/recess including cutting the wall and

making good the same in case of recessed conduit as required.

DISTRIBUTION BOARDS

Supplying and fixing following way, Horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 volts, on

24 surface/recess, complete with tinned copper bus bar, neutral bus bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

a 2.4.1 4 way (4 + 12), Double door, Horizontal Each 2 4378.60 8757.19

b 2.4.2 6 way (4 + 18) ,Double door, Horizontal Each 2 5323.67 10647.34

c 2.4.3 8 way (4 + 24), Double door, Horizontal Each 24 6386.48 153275.52

Supplying and fixing following rating, four pole, 415 volts, isolator in the

25 2.13 existing MCB DB complete with connections, testing and

commissioning etc. as required.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Supplying and fixing following rating, double pole, (single phase and

neutral), 240 volts, residual current circuit breaker (RCCB), having a

26 2.14 sensitivity current upto 30 milliamperes in the existing MCB DB

complete with connections, testing and commissioning etc. as

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in

the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB

complete etc. as required.

ERRECTION OF FAN & FIXTURE

Installation ,Testing, Commissioning of wall bracket fittings of all sizes

29 1.33 and shapes including LED lamps per fitting, complete with all each 2 93.12 186.23

accessories including connections etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent

fitting / compact fluorescent fitting / LED Fittings of all types,

30 1.41 with all accessories and tube etc. directly on ceiling/ wall, each 11 220.48 2425.30

including connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc. as required.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Installation, testing and commissioning of pre-wired, fluorescent

fitting / compact fluorescent fitting / LED Fittings of all types and

31 MR shape, with all accessories and tube etc. on falsceiling including each 6.4218 250.00 1605.45

connection with 1.5 sq. mm FR PVC insulated, copper conductor,

single core cable and earthing etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep,

BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)

Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2

nos. canopies, shackle kit, safety rope, copper winding, Power Factor

not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery

32 19.1 minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), each 6 2921.92 17531.51

THD less than 10%, remote or electronic regulator unit for speed

control and all remaining accessories including safety pin, nut bolts,

washers, temperature rise=75 degree C (max.), insulation resistance

more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as required.

Installation of exhaust fan in the existing opening, including

33 1.5 making good the damage, connection, testing, commissioning etc.

a 1.50.1 Upto 450 mm sweep each 1 481.64 481.64

b 1.50.2 Upto 510 mm sweep each 1 688.20 688.20

Extra for fixing the louvers/ shutters complete with frame for a

exhaust fan of all sizes.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including

accessories, and providing masonry enclosure with cover plate having

35 5.2 locking arrangement and watering pipe etc. with charcoal/coke and Nos. 12 7336.91 88042.88

salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing masonry enclosure with cover

plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick

including accessories, and providing masonry enclosure with cover

plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess

for connections etc. as required.

Providing and fixing 25 mm X 5 mm Copper. strip on surface or in

recess for connections etc. as required.

5.18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for

40 loop earthing along with existing surface/ recessed conduit/ submain Mtr 400 44.95 17981.04

wiring/ cable as required

6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia

300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6

mm thick G.I. base plate including holes etc. complete as required.

6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on

42 surface of wall for lightning conductor and external lighting complete Mtr 750 134.86 101143.35

as required. (For Horizontal run)

6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on

43 surface of wall for lightning conductor complete as required. (For Mtr 150 210.85 31627.37

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

6.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I.

44 strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and Set 12 129.51 1554.08

spring washers etc. complete as required.

INTELLIGENT FIRE DETECTION AND ALARM SYSTEM

17.2.1 Supplying, installation, testing and commissioning of micro processor

based intelligent addressable main fire alarm panel, central

processing unit with the following loop modules and capable of

supporting not less than 240 devices (including detectors) and

minimum 120 detectors per loop and loop length up to 2 km, network

communication card, minimum 320 character graphics/ LCD display

with touch screen or other keypad and minimum 4000 events history

log in the non volatile memory (EPROM), power supply unit (230 ± 5%

45 V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free

batteries with automatic charger. The panel shall have facility to

connect printer to printout log and facility to have seamless integration

with analog/digital voice evacuation system (which is part of the

schedule of work under SH: PA System) and shall be complete with all

accessories . The panel shall be compatible for IBMS system with

open protocol BACnet/ Modbus over IP complete as per

17.2.9 Supplying, installation, testing & commissioning of intelligent

46 addressable thermal detector with rate of rise cum fixed tempreature Each 2 2917.64 5835.28

thermistor complete with base as required.

17.2.4 Supplying, installation, testing & commissioning of intelligent analog

47 addressable photothermal detector complete with mounting base Each 4 3058.92 12235.67

complete as required.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

17:02:12 Supplying, installation, testing & commissioning of

addressable beam detector with short circuit isolator (inbuilt

or seperate) complete with emitter and receiver including Each 10 80205.07 802050.71

connections with remote test features etc complete as

17.2.5 Supplying, installation, testing & commissioning of response indicator

48 on surface/recessed MS Box having two LED, metallic cover complete Each 20 295.40 5908.06

with all connections etc as required.

17.2.14 Supplying, installation, testing & commissioning of

addressable manual call point complete as required.

17.2.15 Supplying, installation, testing & commissioning of

addressable horn cum strobe complete as required.

17.2.7 Supplying, installation, testing & commissioning of fault

isolator complete with base as required.

17.2.10 Supplying, installation, testing & commissioning of

addressable fire control module complete as required

17.2.11 Supplying, installation, testing & commissioning of

addressable phone control module complete as required.

17.2.17 Supplying, installation, testing & commissioning of fire fighter

telephone handset complete as required.

17.5.2 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,

600/1000V rated with annealed copper conductor having XLPE

insulation, steel wire armouring & FRLS outer sheath complete as

Cable End Termination & Pipes

Supplying and making ends termination with brass compression

glands and aluminium lugs for following size of PVC insulated PVC

sheathed aluminiumconductor cable of 1.1 KV grade as required .

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Providing, laying and jointing PVC/RCC NP-2 pipe with Vin stiff mixture

of cement mortar in the proportion of 1:2 (1 cement:2 fine sand)

including trenching (75 cm deep / or as required) i/c testing the joints

etc. in loose soil/under the flooring (before laying the finished flooring)

for electrical cable entrance to the building complete as required i/c

excavation and refilling of earth.

Supplying and laying of following size DWC HDPE pipe ISI marked

along with all accessories like socket, bend, couplers etc. conforming

to IS 14930, Part II complete with fitting and cutting, jointing etc.direct

in ground (75 cm below ground level) including excavation and refilling

the trench but excluding sand cushioning and protective covering etc.,

complete as required.

a 14.16.1 63 mm dia (OD-63 mm & ID-51 mm nominal) metre 200 264.36 52872.82

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

b 14.16.2 90 mm dia (OD-90 mm & ID-76 mm nominal) metre 5 310.39 1551.94

c 14.16.3 120 mm dia (OD-120 mm & ID-103 mm nominal) metre 5 393.87 1969.35

d 14.16.4 160 mm dia (OD-160 mm & ID-135 mm nominal) metre 15 514.81 7722.21

e 14.16.5 200 mm dia (OD-200 mm & ID-175 mm nominal) metre 100 714.96 71496.04

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

B NON SCHEDULE ITEMS

DATA /TELEPHONE / EPBX

Supply and fixing following modular switch/socket on the existing

59 modular plate and cover plate & switch box including connections but

excluding modular plate etc. as required.

a Information Socket Outlet RJ -45 suitable for CAT 6 Data Each 5 825.00 4125.00

Supply installation testing and commissioning of MDF (Krone) &

60 Connecting Cable (3 x 16) Each 1 8500.00 8500.00

NEC Japan / Epygy USA / Grandstream USA

Installation, testing and commissioning of Axial Flow fan upto 450 to

600 mm. sweep in the existing opening i/c making the hole to suit

the size of the above fan making good the damage, connections,

testing commissioning etc. as required

SITC of light fixtures suitable for LED fixture, lamps with all

components and accessories including but not restricted to reflectors,

62 housings, lamp holders and including cost of ballasts and cost of

lamps complete as required and as below Make:-Bajaj,Havells,Polycab

20W LED Tube light of Havells Cat Ref:

LUMILINESMART20WLED865PCWH or equivalent.

Recessed mounted 18 W Downlighter of Havells Cat Ref:Havells

VIBEFLRDDLR18WLED830S or equivalent.

Recessed mounted 12 W Downlighter of Havells Cat Ref:Havells

GLOWDLR12WLED857S or equivalent.

Surface mounted 18W LED Downlighter of Havells Cat Ref:Havells

EDGESURFACERDDLR18WLED840S or equivalent.

11/15W Mirror Light of Havells Cat Ref:

LUMILINEXS17WLED865SPCWH or equivalent.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

10W LED Bulk Head of Havells Cat Ref:

RUGBYGENXFTS10WLED865SSYMBOPC or equivalent.

Supplying of Axial Flow fan upto 450 mm. Sweep,280V,1400

RPM,stainless steel material, in the existing opening i/c making the

hole to suit the size of the above fan making good the damage,

connections, testing commissioning etc. as required

Supplying of under note sizes of heavy duty exhaust fans complete

64 with fan motor, blades fixing frame, louver etc as required of havells

makes or equivalent.

450 mm exhaust fan 900 RPM Each 1 2968.00 2968.00

Supply, installation, testing and commissioning of 5 kVA,1 Phase

input and 1 Phase output UPS alongwith lead acid batteries giving a

back up of min. 30 min. at full load as per specification alongwith all

accessories including interconnecting cables, lugs, Base Frames,

Battery Rack & Battery Circuit breaker, palral kit complete as

required.Make: Schneider /Delta/APC/Autometer/ABB

IP CCTV SURVEILLANCE SYSTEM

Supply installation Testing and Commissioing Fixed Lens Outdoor

Bullet Camera - Supplying, Installation, testing & commissioning of

2MP H.265 NW IR vandal proof bullet Camera, 0.03Lux (Color), 0Lux

(B/W, IR LED on), 2.8mm fixed lens, 30fps@2M all resolutions, 120dB

WDR, H.265, H.264, MJPEG codec supported, Triple stream , Inbuilt

Analytics - Defocus detection, Directional detection, Motion detection,

Enter/Exit, Tampering, Virtual line, Audio in , alarm in & out, Micro

SD/SDHC/SDXC memory slot (Max. 128GB), IR viewable length 20m,

IP66, IK10, PoE, CE, FCC, UL, NDAA complaint, Non-Chinese.

Pelco/ Mobotix/ Avigilon/ Axis / Hanwha

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Supply installation Testing and Commissioing Varifocal Lens Outdoor

Bullet Camera - Supplying, Installation, testing & commissioning of

2MP H.265 NW IR vandal proof bullet Camera, 0.03Lux (Color), 0Lux

(B/W, IR LED on), 3.2mm - 10mm Varifocal lens, 30fps@2M all

resolutions, 120dB WDR, H.265, H.264, MJPEG codec supported,

67 Triple stream , Inbuilt Analytics - Defocus detection, Directional Each 2 38,500 77,000

detection, Motion detection, Enter/Exit, Tampering, Virtual line, Audio

in , alarm in & out, Micro SD/SDHC/SDXC memory slot (Max. 128GB),

IR viewable length 20m, IP66, IK10, PoE, CE, FCC, UL, NDAA

complaint, Non-Chinese.

Pelco/ Mobotix/ Avigilon/ Axis / Hanwha

Supply installation Testing and Commissioing Network Video Recorder

- Supplying, Installation, testing & commissioning of 32CH NVR , Dual

monitor video out support, H.265, H.264, MJPEG compression

support, ONVIF support, 8 internal HDDs, i/c RJ45 connector i/c

connection etc, supports, N+1 failover, UL, BIS. complete as required

Pelco/ Mobotix/ Avigilon/ Axis / Hanwha

Supply installation Testing and Commissioing of Client Viewing Video

Sofware. Milestone/ Hanwha / Axis / Pelco

Supply, Installation, Testing and Commissioning of Surveillance Hard

disk - 6 TB Storage. Recording parameter: 30 days of recording at

FULL 1080p, 25fps H.264 compression, complete as required.

WD/ Seagate / Hitachi

Supply, Installation, Testing and Commissioning of Client Desktop PC

with Core i7 processor, 8GB RAM, | TB HDD, Windows 64 bit OS,

external DVD writer, wireless leyboard, wireless mouse, 2GB Graphics

card with dual monitor support, complete with high quality 5 mtrs HDMI

cables for connecting displays (2 displays per unit), complete as

required.HP / Dell / Lenovo

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Supply, Installation, Testing and Commissioning of 55" or better 4K

72 professional displays for 24x7 CCTV application, complete as required. Each 1 1,65,000 1,65,000

LG / Samsung / Benq

Supply, Installation, Testing and Commissioning of Networking Rack of

9U along with PDU (With surge protection), cable manager, fan etc for

Switches & other accessories etc, complete as required. Netrack /

Supply, Installation, Testing and Commissioning of Networking Floor

Standing Rack of 42 U along with PDU (With surge protection), cable

manager, fan etc for Switches, Servers & other accessories etc,

complete as required. Netrack / Valrack

Supply, Installation, Testing and Commissioning of Layer II Smart

Managed Gigabit Ethernet switch: 8 port RJ45 10/100/1000 T (POE), ,

complete as required.

Netgear / Cisco / Dlink/Alt global

Supply, Installation, Testing and Commissioning of Layer II Smart

Managed Gigabit Ethernet switch: 16 port RJ45 10/100/1000 T (POE),

, complete as required.

Netgear / Cisco / Dlink/Alt global

Supply, Installation, Testing and Commissioning of SFP modules

77 (1G/10G), complete as required. Each 6 4,500 27,000

Dlink/ Cisco / AMP / Molex

Supply, Installation and Commissioning of RJ-45 i/o Jack with Plate &

78 mounting Gang Box, complete as required. Each 56 1,250 70,000

Dlink/ Cisco / AMP / Molex/Legrand

The BOQ shall be read in conjunction with general notes, specification

and equipment schedule and single line diagram.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Supply and installation of the following cubical type panels ( Partial

Type tested ) made of 14 gauge CRCA structure, base channel, doors

& partitions complete with, Air Circuit Breaker, moulded case circuit

breakers, meters, indicating lamps, current transformer etc. Complete

in all respects, insulated bus bars with heat shrinkable PVC sleeve in

suitable bus chambers, interconnection, small wiring, name plate,

danger plate, earth bus etc. & comprising of compartments with hinged

door for each feeder & its accessories, cable alley with hinged doors,

bus chamber with bolted door etc. The panel being of dust & vermin

proof construction with rubber gasket, attractively powder coated with

Siemens grey shade and having orange peel finish. The panel shall be

free standing type/ wall mounted type as per relevant drawing,

Equipment schedule, specifications including all materials,

accessories, loose supplied items, etc. required for completeness of

the project majorly comprising of following : -

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

ACB shall have a rated operational voltage of 415V AC, rated

insulation voltage of 1000 volts AC, rated impulse voltage of

12kV.ACB shall be Moulded Case design and shall comply with

standards IS/IEC 60947-1 & 2. with Ics = Icu = Icw (1sec) = 50kA.

Both fixed & draw-out circuit breakers shall have single pole-pitch.

ACBs upto 3200A shall be provided with top horizontal and bottom

vertical terminal adapters on both sides for proper cable

connections/bus duct connections.

Shunt trip and closing coil (having common AC/DC supply upto 250V)

shall be continuous rated.

There Should be On, Off, Trip, Spring Charge and Ready to close

Indication lamp for all ACB on the panel door..

ACB trip unit shall be EMC/EMI tested and should have a display for

measurement of current and voltage. It shall be possible to view last 5

trip cause on trip unit. Separately powered, individual fault trip

indication LEDs (For O/L, S/C, E/F and trip unit failure) shall be

available on the trip unit which shall function even if the display fails.All

ACB shall be EMS compitable.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

All MCCBS shall be with Extended type Front door operating handle,

Phase Spreaders & Phase Barriers complying to IS/IEC 60947-1 & 2.

MCCBs shall be current limiting type preferably having an

encapsulated double break design, with rated operational voltage (Ue)

of 415V, insulation voltage (Ui) of 690 V (AC 50/60 Hz) & impulse

voltage (Uimp) of not less than 8kV.

The electrical life of MCCBs shall be 8,000 operations up to 250A &

4000 operations up to 630A and shall be of single frame size upto

250A.Cable Termination on MCCB should be done using circular lugs

being fixed with a bolt passing through.

For E/F in MCCBs wherever required , external earthfault module with

CBCT should be used with indication lamp on the panel and fault

sensitivity selection from 20% – 60% In. and time delay selection in

case of Earth Fault from 0.5 to 3 Sec/ instantaneous.All incomer

MCCB should be with E/F protection also.There Should be On, Off,

Trip, and electrical fault trip Indication lamp for all MCCB on the panel

door. Separate fault differentiation indication (LED) for Over current

and Earth fault. Indication for over current and earth fault tripping shall

be extended to the panel door via indication lamps..All MCCB shall be

EMS compitable.

All MCCBs of ratigs above 250A shall be microprocessor based and

upto 250A shall be Thermal Magnetic Type and with Min 35 kA Rating

ON, OFF, Trip and Ready to close status for each ACB and ON, OFF

Trip staus for all Incommer MCCB shall be avilable on MODBUS.

Control Voltage for Closing / Tripping coils , Spring charging motor &

Indicting lamps in Manually / Electrically operated ACB Feeder shall

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Metering CTs burden shall be with suitable VA & accuracy class .5

CTs shall be "CAST RESIN" type .

All indication lights shall be LED type.

All energy meter shall be "DIGITAL" type with Modbus Protocol as per

techncial Specification

Panel Manufacturer should have Type Test Certificates for Short Time

withstand current test of 50KA for 1.0 Sec from CPRI. Bhopal /

Control SP MCB's of 2A Rating shall be provided for each metering

20% spare control terminal to be provided.

Live parts shall not be accessible after opening the door, Transparent

acrylic sheet to be provided to cover the same & busbar joints section

shall be covered with PVC shrouds.

All bus bar shall be insulated with coloured PVC Sleeve i.e. R, Y, B,

BK as per colour code.

All internal control wiring shall be heat resistant type.

All TP/TPN feeders shall have solid isolable neutral link.

All starters shall be provided with Auto/ Manual selector switch, MPCB/

MCCB/MCB, over load relay, single phasing preventor, ON/OFF/ Trip/

Trip on Eclectrical Fault indication lamps, ON/OFF push Buttons,

contractor and suitable No. of Potential free contacts for remote / local

operations, indication, interlocking and Building Management system.

Current density for bus bar shall not be more than 0.8A/Sqmm. Rating

of Bus bar is after considering all derating factors. (Bus bar sizing

calculation to be submitted for approval.)

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

All TP/TPN feeders shall have solid isolable neutral link.

Bus couplers shall be provided with ON & OFF indicating lights but

without releases.

All feeders shall be provided with door interlocked with door defeat,

pad lock facility.

Spare contacts of Relays/Contactor etc. shall be wired upto terminal

Degree of protection for following type of distribution panel enclosure

shall be as per IS:13947-1993.

IP 43 for indoor panels.

IP 55 for outdoor panels.

Contractor and panel builder shall have to submit the GA drawing and

get approval from consultant before inplementing.

Rotary handal shall be provided with all MCCBs.

2 Nos.500A, 4P MCCB

2 Nos.500A, 4P Contactor

Metering & Indication:

Combined Ammeter/Voltmeter with Selector Switch and 400/5A, CL-1,

10VA CTs and 2A control MCB.

Sets of phase indicating lamp with control MCBs.

All incomer shall be electrical and mechanical interlock.Consider

suitable rating of contactor and software, hardware , accessories for

interlocking and auto on auto off of incomers.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

600A, TPN aluminium, colour coded bus bars suitable for 415V, 50Hz

with fully rated neutral.(After deration)

1 Nos.160A, TPN MCCB

2 Nos.100A, TPN MCCB

14 Nos.63A, TPN MCCB

4 Nos.40A, TPN MCCB

1 Nos.40A, TPN MCB

4 Nos.16A, DP MCB

2 Nos. Bulb with holder

Panel shall be suitable for incoming & outgoing supply with cables,and

top / bottom entry as required.

Supply & Laying of 1.1KV grade multicore aluminium conductor XLPE

insulated and PVC sheathed armoured cable conforming to IS : 7098

(Part-I) 1998 along walls/ on existing cable trays etc. in an approved

manner and as per follows;

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Constructing Masonry chamber 60x60x75 cm (deep) inside with 75

class designation FPS brick work in cement mortar 1:4 (1 cement: 4

coarse sand) (for cable entry) with 10 mm thick M.S. hinged cover

81 plate on top in 40 x 5 mm MS angle iron frame embedded in C C 1:2:4 each 8 7500.00 60000.00

i/c necessary excavation and inside plastering with cement mortar 1:3

(1 cement:3 fine sand) finished with a floating coat of neat cement

complete as required and as per specifications attached.

Constructing masonry chamber 60 cm x 45 cm x 50 cm (deep) inside

with 75 class designation FPS brick work in cement mortar 1:4 (1

cement : 3 coarse sand) (for cable entry) with 10 mm thick M.S.

hinged cover plate on top in 40 x 40 x 5 mm MS angle iron frame

embedded in C C 1:2: 4i/c necessary excavation and inside plastering

with cement mortar 1:3 (1 cement:3 fine sand) finished with a floating

coat of neat cement complete as required and as per specifications

EXTERNAL LIGHTING

Supplying and fixing (with suitable MS clamp) 300mm long 65mm dia

MS pipe with base plate i/c nipple for Gate light.

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Supplying, installing, testing & commissioning of 4.5 Mtr long

single dip Galvanised steel octagonal poles in 3mm sheet

integrated connector box inside the pole containing one no. 5A

MCB , Neutral link and earth terminal with single over hang

bracket 1m long ; providing and fixing in position 1:2:4

reinforced cement concrete foundation for the pole, size

500mm(L)X500mm(W)X 1650mm deep i/c excavation of earth,

providing, cutting, bending and placing in position reinforcement as

per drawing and providing PVC flexible pipes 50mm dia for cable

entry and exit as required i/c foundation bolts, transportation,

handling, marking etc. as per specification and drawings as required of

Havells/ Bajaj or equivalent

Supply and installation of following arms suitable for 4.5 Mtr to 9 mtr

street light pole

a Single Arm over hang bracket 1mtr length each 14 3384.00 47376.00

b Double Arm over hang bracket 1mtr length each 3 4600.00 13800.00

Providing and erection of black painted galvanized 3 meter high poles

in different section, top 60mm dia., bottom 100mm dia. with gold

colour painted ornamental cast aluminium ring having lockable

weather proof flush door junction box in bottom section, and suitable

arrangement for installation of CCTV and with base plate dia. 290mm

having 4 holes of 22mm dia. complete erected in an approved manner

including foundation of Suitable size & type of foundation bolts as

required. (For CCTV)

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

supply & drawing 3 core 2.5 sqmm unarmoured copper

cable inside the GI Octagonal pole from connector box to the

fixture including connections with thimbles as required upto 9m high

Supplying and fixing (with suitable MS clamp) 1200mm long vertically

88 and 900mm inclined at 45 degree, 65mm dia MS pipe with hardware each 1 5000.00 5000.00

i/c nipple for street light.(boundary wall light)

Supplying and fixing of LED Bollard Fitting 600mm High with IP65 and

IK07 Housing made up of aluminum pipe powder coated black after

phosphochromate treatment with aluminum heat sink for effective

thermal management Complete with Mounting Brackets & accessories

as required with connections similar. Havells Mount Bollard 0.60 mtr

89 5700K MOUNTBLMINIMOUNTBL10WLED830PSYMTOPMMAS . The Set 18 5771.00 103878.00

product should be BIS approved with R number mentioned on product

label. To be supported with Product test reports - LM79, Is 10322/IEC

60598 and for LEDs - LM80, RoHS and Photo Biological Safety

Supply, fixing &testing of prewired external light fixture having Die-

cast housing with epoxy coating and having profiled cooling fins at

the top for effective heat dissipation, separate driver and LED

lamp cavity, heat resistant toughened clear glass cover with high

transmittance and high quality gasketing system, high power

LED complete as required.

25 Watt LED Fitting Lighting lantern on GATE/ POST TOP of Havells

Cat no.CORALMINIPT15WLED757PSYMTOPC or equivalent ..

Digitally signed by PRIYA

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Construction of 250mx30m of shed with 25 Tons (Revised) EOT Crane facility in General Store Area of MM- Stores Department

S.No. Description Unit Qty

DSR 2022 (In Rs.) (In Rs.)

Street Light Luminare of 60 watt LED including suitable fixing MS

iii clamps etc.as requird of Havells Cat No. each 20 6224.00 124480.00

ENDURASUNDOWNSL60WLED765PASYBOTG or equivalent

Street Light Luminare of 35 watt LED including suitable fixing MS

iv clamps etc.as requird of Havells Cat No. each 1 3847.00 3847.00

ENDURASUNDOWNSL35WLED765PASYBOPC or equivalent

Floodlight LED luminaire 50 Watas with high pressure die cast

v housing with IP66 deg of protection of Havells Cat No. each 2 5429.00 10858.00

JETAQUANTOPLUSFLP50WLED757SYMLENS or equivalent

DSR TOTAL Rs. 96,67,550.04

NON DSR TOTAL Rs. 63,38,144.00

DSR + NON DSR TOTAL Rs. 1,60,05,694.04

Digitally signed by PRIYA

Project Name : Construction of 250mx30m of shed with 25 Tons EOT Crane facility in General Store Area of MM- Stores Department (SHED-2)

SITC of Furniture & Equipment

Sl. No Item No Product Description Quantity Image

Conference Table - 12 Seater - Conference Table Top 25 mm Thickness PLPB Board as Per Approved Laminate Shade. Understructure Top Supported 18 mm PLPB

Board Prime Quality , With 18mm Thick PLPB Board Gable End . Modesty Panel 18mm Thickness PLPB Board Supported To Top. Conference Table Top Size 3600W X

2700D X750 mm . Provided Wire Management For Conference Table Top Flushed With Flapper. Wooden Panels Flat Edge Duly Sealed With 2mm Thick Pvc Beading. All

Wooden Panels, Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment. All Wooden Panels Cleaning Corner Knitted Finish. Legs Of The Table

having Hard Rubber Shoes. Metal Flapper Duly Powder Coated. All Wooden Top , Legs & modesty Panels Assembled & Dismental Any Places Easily. Gable end Shall be

BOD Conference Jointed Together With 18mm Thick PLPB Board Accurrately Matching Sides Avoiding Any Gaps. The product should bear IGBC Green Pro certificate for product

Table category.Company sholud be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range Including seating systems

.Company should be Green Co Gold Certification By CII.OEM should possess / have own lab for testing quality as per the BIFMA guidelines. Documentary Evidence in

the form of the list of machineries with Photographs need to be submitte.

Conference Room - Chair -Medium Back Chair Made Of Good Quality Products Of Standard Models . Chair -height -990-1090, L710X695 D. Seat with mesh back & seat

Plywood Made Of Hot Pressed Supported . Upholstery Structure Moulded With Prime Quality Fabric in Seat . Gas-Lift for height adjust maximum 100mm )

Understructure Base Revolving Pedestal nylon star base . Machanism Centre Tilt Can Be Operated In Seating Position . Seat & Back Are Firmly Connected To The

Base Frame Machanism . Machanism Provided Upright Position Locking . Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Arm Rest Soft PU On Handle

2 Poise Mid Back with adjustable . Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Pedestal Pitch Centre Dia 650mm With Casters . Casters Made Of Moulded Black Nylon 12 10,992 1,31,900

Metal Bolt Inserted & Fitted With 5 Nos . Company should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE

range Including Seating System .

High Back Chair Made Of Good Quality Products Of Standard Models . Seat Plywood Made Of 12mm Hot Pressed . Upholstery PVC Structure Moulded With Prime

Quality High Stretch Fabric Mesh . Seat & Back Are Firmly Connected To The Base Frame Machanism . Machanism Provided CTS Tilt Adjustment Can Be Operated In

Seating Position . Chair Max Height 1165-1260 . 710 L x 695D Base Seat Moulded With PU Foam .Back Seat PP Structure Moulded Fabric Mesh . Back Lumber Support .

3 POISE HB Arm Rest Adjustable . Headrest Adjustable Type PU Foam With PP Cover At Back . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . 6 11,535 69,207

Twin Wheel Casters Pedestral Pitch Centre Dia 650mm Without Casters Company should be BIFMA member having AIOTA (All India Occupational Therapists

Association) for OFFICE FURNITURE range for ergonomic design included seating sytem .

HOD Table -Office Table Top 25mm Thick PLPB Board With Pvc Edgebanded Finish With As Per Approved Laminate Shade . Table Size 1800W x 1800D x 750mm .

Mobile Pedestal with fixed . Table Top Supported Understructure Of Table Gable - End Made Of Prime Quality PLPB Board. Mobile Drawer Top 18mm Thick Wooden

Board With Edgebanded. Mobile Drawer Used Sliding Telescopic Channel With All Fittings & Shutter Used C - Frame Handles . Side Storage Top 18mm Thick PLPB Top

With Edgebanded . 18mm Thick Wooden Shelve & Divider . Storage Front Facia 18mm Thick PLPB Sliding Shutter . Wooden Panel Skirting Provided in Side Storage .

Pvc Bofurs Screw With Gable - end & Side Storage . All Wooden Panels Cleaning Corner Knitted Finish . All Wooden Panels , Gables & Modesty Fix Joints With Minifix

4 Elegant Table Dowels & Other Fitting Equipment . All Wooden Panels Prime Quality Board With ISI Marked . The product should bear IGBC Green Pro certificate for product category. 1 4,207 31,000

And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.Product should be bifma

compliant and share the screen shot from the bifma website .Indian Design Mark Certificate required .

Vistor Chair -Medium Back Chair Made Of Good Quality Products Of Standard Models . Seat & Back Plywood Made Of Hot Pressed Supported . Understructure Base

Of Chair Metal Structure Fixed Type . Upholstery Structure Moulded With Prime Qaulity fabric . Understructure Base Fixed Type CRCA Metal Pipe Duly Powder Coated

. Seat & Back Are Firmly Connected To The Metal Frame . Chair Max Height 1070 & min Depth 605mm . Base Seat Moulded With PU Foam , H - 1070& 600W x 605D

Back Seat Moulded With PU Foam , Back , Seat Shell & L - Patta NA . Beading Finish With Chrome Plated .510/600 Arm Rest Fitted To The Seat With Armrest

5 Volga Visitor 4 11,942 35,200

Connecting Brackets . Arm Rest Soft Handle attached with seat . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA

member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for Included Seating system .

Central table -Providing & Fixing Table. Top made of 12 mm thick glass of black tinted black color toughened galss UV glued with bushes made in SS 202 grade for fixing

with understructure. legs made of stainless steel 12 mm dia. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member

having AIOTA (All India Occupational Therapists Association) .

6 Central Table 2 10,992 21,983

Digitally signed by PRIYA

Sofa 3+1-Sofa Made Of Good Quality Products Of Standard Models . 12mm Ply Used Made Of Back & Base . Premium comfort soft pvc and plus foam for superior

comfort .Upholstery Made Of Prime Quality Rexine Black . Back Seat Moulded With Foam , Arm rest With Foam , Sophisticated elegance Quited tan pvc with chrome

legs .The Apex 3 Seater is crafted to deliver lasting comfort. Its design will ensure ample lumbar support, and an ideal seat height promotes all sorts of healthy

postures, A simple yet stylish quilted texture in modern textured Tan PVC completes this sofa piece as a classy addition to your office or any living space. The boldly

7 Sofa Apex 3+1 chromed metallic legs add for a sleek look, blending wonderfully with any of the décor choices. 3 seater sofa size - 1980X840X900 ,Single Sofa Size-900X840X900. All SS 2 58,351 1,16,702

Pipes Shall Be Welded Properly Strongly and conformity with regulations . Sofa Structure Stailness Steel Pipe Shall Be Abrasive Polished External Finished .Company

should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range Including Seating Sytem.SCS Globle Certificate

Single Bed -Specification:- Single Bed made with high quality Pratical Board ,modren single bed with without Storage . Table 1970x960mm x790H.Made up of

engineering wood, bed frame crafted from high-quality engineered wood/particle board,: Durable, high-quality engineered wood with a sturdy build.delivered in a

knocked-down condition.simple to clean underearth for a clutter free Space . typically available in Walnut or Wenge finishes.The product should bear IGBC Green Pro

Single Bed ARTHuR certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) forOFFICE FURNITURE range .

Mattress- mattress size -1905x 915 mm- Latex Mattress. Natural latex feels soothing and comfortable. The cool Breathable fabric offers a soft and cooling surface. Its

all-natural construction is free of harmful chemicals. It provides you with the ideal softness-to-bounce ratio. Advanced pinhole technology enhances breathability. Soft

foam filling offers comforting softness to your body. The zipper cover is both removable and washable. PU foam delivers sufficient support and cushioning. For people

9 Mattress of all ages, even for the elderly and babies. One mattress for all that gives orthopaedic-like comfort. 1 14,656 14,656

Chair - Size- 560 W X 580 DX 800 H mm ,High-quality plastic construction for lasting durability.Ergonomic design with cushioned seat and backrest.The glossy lacquered

finish resists UV rays and rust.Soft feel fabric adds a touch of comfort and beauty.Easy to clean and maintain, Suitable for indoor and outdoor. product should have

Green guard Certificate and Copmany should have 50001 Certificate in moulded Furniture with NABCB and IAF .BIS: 13713 certificare required .

10 Signature 1 4,580 4,580

Executive Office

table -Main Desk Table Top Thickness 25 mm Thick PLPB Board (BSL ) With 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade . Table Size 1650L

x 1950D x 750mm with L shape . Pedestal with three drawer Side table with modesty . Drawer Top 18mm Thick PLPB Board With 2mm Thick Edgebanded. Table Side

Made Of 25 mm Thick PLPB Board . Drawer Used Sliding Telescopic Channel With All Fittings & Shutter Used C - Frame Handles. Drawer All Wooden Panels Used 18mm

Thick with Edgebanded . Table & Drawer Panels Flat Edge Duly Sealed With Pvc Beading . Side Storage and Full Height Storage Top 18 mm Thick Top With 2mm Thick

11 dual tone-table Edgebanded . 18mm Thick PLPB Shelve & Divider . Drawer fitted with Handle . All Wooden Panels , Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting 7 45,188 3,16,317

Equipment . All Wooden Panels Prime Quality Board With ISI Marked . Company should be BIFMA member.Prodct should be Green Pro Certified by IGBC .The OEM

should be a reputed branded company and should possess 10 products Green-guard (from UL ) certification. A screenshot from the official website (spot.ul.com) to be

High Back Chair Made Of Good Quality Products Of Standard Models . High back design with adjustable headrest provides complete neck, shoulder, and posture

support. Seat Plywood Made Of Hot Pressed Back Mesh With PP Structure . Upholstery PVC Structure Moulded With Prime Quality High Stretch mesh back . Seat &

Back Are Firmly Connected To The Base Frame Machanism . 100 mm gas lift offers smooth height control, Machanism Provided Upright Position Locking Fixed Back &

Back Tilts . Tilt Adjustment Can Be Operated In Seating Position . Chair Max Height 1220mm . 750x 740D Base Seat 70mm Thick Moulded With PU Foam D - 45kg/m3 &

550W x 800H Back Seat PP Structure Moulded Fabric Mesh . Headrest Support Adjustable Type PU Foam With .adjustable Lumber Support.4 position locking for mesh

uppholstered backrest adjustable 3D armrest with pu pad .Understructure Used Chrome Plated Steel Base With PP Hub . Casters Made Of Moulded Black Nylon Metal

Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Pedestral Pitch Centre Dia 650mm With Casters . twin wheel nylon castors ensure smooth, quiet

12 Poise Pro HB movement while protecting floors from scratches.Strong aluminium diecast star base ensures lasting durability and steady support for everyday use.high-back design 7 17,302 1,21,112

with adjustable headrest supports your neck, shoulders, and posture, while breathable mesh and 3D PU-padded armrests let you sit exactly how you like. Enjoy smooth

height adjustment and automatic tilt with the weight-sensing mechanism and move effortlessly on durable twin-wheel castors with a strong aluminium base. Designed

for comfort.Company should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design

included Sea ng System. j)Should have BIS:17631, BIS: 17632, BIS: 17633, BIS: 17634, and BIS: 17635

Revolving Chair -High Back Chair Made Of Good Quality Products Of Standard Models . Seat & Back Plywood Made Of Hot Pressed Supported . Upholstery PVC

Structure Moulded PU With Prime Quality High Stretch Fabric . Understructure Base Nylon star base with twin-wheel casters for stable mobility. centre tilt synchro

Machanism Can Be Operated In Seating Position . Seat & Back Are Firmly Connected To The Base Frame Machanism . Chair Max Height 980-1080 & 680W x 680D

. Arm Rest Fitted To The Seat. Arm Rest Made Of good quality pp .Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Casters Made Of Moulded Black Nylon

Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Company should be BIFMA member having AIOTA (All India Occupational Therapists

Associa on) for OFFICE FURNITURE range Included Sea ng System.h)Should have Green guard Gold cer ficate issued UL for minimum 10 products

Digitally signed by PRIYA

Visitor Chair -Visitor Chair Made Of Good Quality Products Of Standard Models . Comfortable PU foam seat and back with fabric upholstery.Seat Plywood Made Of Hot

Pressed Supported . Upholstery PVC Structure Moulded With Prime Quality Fabric .PP fixed armrests provide stable arm support. Seat & Back Are Firmly Connected To

The Base Frame. Arm Rest Fitted To The Seat With Armrest Connecting Brackets Durable powder-coated mild steel frame ensures durability. Arm Rest PP fixed On

14 optima visitor Fixed on seat .push back machaism power coated ms base. size- 990X680X680 mm. Compnay should be BIFMA member having AIOTA (All India Occupational 14 7,633 1,06,864

Therapists Association) for OFFICE FURNITURE range for ergonomic design.

Fixed Chair Medium Back -Visitor Chair Made Of Good Quality Products Of Standard Models . Seat Plywood Made Of 12mm Hot Pressed Back Pipe Structure .

Upholstery PVC Structure Moulded With Prime Quality High Stretch Fabric . Understructure Base Of Chair nylon Structure Fixed Type . Seat & Back Are Firmly

Connected To The Base Frame Metal Structure . Chair Max Height 1010mm , 620 Lx 590D . Center tilt synchro Machanism . Arm Rest Fitted To The Seat With

Armrest Connecting Brackets .base power coated cantilever steel frame. Arm Rest fixed with loop contour . Understructure All Metal Frame Structure Made Of

25mm Round Metal Pipe 2mm thick Duly Powder Coated . All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be

15 triump Visitor Chair 14 9,635 1,34,886

Used . All Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil,Grease, Dust And Other Dirt Using Special Thermal Control

Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² . Automatic Spray Coating Shall Be Applied To Be Followed By a

Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . Thickness Of Coating (40 – 50) Micron. company should be BIFMA member

having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range Including Seating System.

Cubical 4 seater -Size -2400 WX 1200 DX 1200 H X (workstation size per seating -1200X600X750 mm ). 60 MM inline clusterwith 30 mm return pannel.workstation Top

to be made up of ISI mark 25 mm thick pre laminated Particle Board finished with 2 mm thick PVC edging applied on Through Feed Edging Machine UNDERSTRUCTURE-

SCREEN- Divider screen of to be fixed above the table top level. The fabric screen to be having aluminium sections all 4 sides. Race way–CRCA raceway for carrying

4 cubical electrical and data wiring are provided below the table top with provision for fixing switches. Each cluster to be provided with wire riser from floor to wire raceway and

workstation aluminium access flap on worktop for easy access to electrical switches . Pedestal , KEY BOARD AND with Company should be BIFMA member having AIOTA (All India

Occupational Therapists Association) .

Revolving Chair -Medium Back Chair Made Of Good Quality Products Of Standard Models . Seat & Back Plywood Made Of Hot Pressed Supported . Upholstery PVC

Structure Moulded PU With Prime Quality High Stretch Fabric . Understructure Base Nylon star base with twin-wheel casters for stable mobility. centre tilt synchro

Machanism Can Be Operated In Seating Position . Seat & Back Are Firmly Connected To The Base Frame Machanism . Chair Max Height 910-1010 & 680W x 680D

17 Optima MB . M Arm Rest Fitted To The Seat. Arm Rest Made Of good quality pp .Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Casters Made Of Moulded Black Nylon 16 8,278 1,32,443

Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Company should be BIFMA member having AIOTA (All India Occupational Therapists

Association) for OFFICE FURNITURE range Included Seating System and education furniture Range.

Steel Almirah -Overall Size 900W x 450D x 2015H . Office Almirah Made Of Prime Quality CRCA Ms Sheet Panels with Powder Coated Finish With Approved Shade .

Each Shelve Made with CRCA MS Sheet Powder Coated . Each Shelve Shall Be Formed Such The Edges Are Bend . Front Shutter in CRCA Ms Sheet Powder Coated With

Hinges. . No Sharp Edges Of Almirah Ends . All Shelve Rack Divided Into Equal Parts . CRCA Metal Sheet Powder Coated . Door Dieper Cast Chrome Plated Handles

Fitted With Washer & Double Nut . Handles Ring Made Of PVC Cap . Almirah All Metallic Panels Screw With Nut & Bolt . All Metal Pieces Shall Be fitted Properly

Strongly and conformity with regulations . All Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil,Grease, Dust, And Other Dirt

INGREGAL STEEL Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² . Automatic Spray Coating Shall Be

ALMIRAH LARGE Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . And should be BIFMA member having AIOTA

(All India Occupational Therapists Association) for office furniture range for ergonomic design.Product sholud be Bifam Compliant and share the screenshot from the

bifma website.OEM should be BIS certified and must have atleast 10 BIS products and proof of same need to be shared along with the technical bid. product should be

IS 17634 : 2022 Certification and put the copy of it in Tecgnical Bid .

Corner Table - table size - 400X 400X 440 H ,Give a chic addition to your living room with the corner table .wood construction lasts you for years to come.Tabletop

features engineered wood and r wood veneer. .Melamine finish adds protection and resistance to the table.Simple and minimalistic design with a rustic touch adds

19 Corner Table character.Warm brown shade with a modern design brings a welcoming vibe. 8 9,906 79,249

Supply & Installation of water cooler cum inbuilt UV purification system.

•Flow Rate- 120 LPH

•Storage Tank-80 Liters

•Cooling Capacity- 60 LPH

•Faucets-02 (01 Cold, 01 Normal) with Top Revolving Type

•Purifica on UV Technology

Water Filter with

20 •Dual Auto cut func on 3 1,10,400 3,31,200

•Storage Tank SS 304 (with provision for auto sani za on of storage tank water)

•Outer Body Full SS204

•MCB (Mini Circuit Breaker)

•Floor mounted with lockable wheels for easy movement.

•Water Standard USEPA & IS 10500

•Product with ISO 9001, ISO 14001, 45001 WQA.

Digitally signed by PRIYA

Supply, Installation, Testing and Commissioning (SITC) of Professional Desktop Computer System comprising of:

Processor: Intel Core Ultra 3 (Series 3) with latest hybrid architecture, integrated NPU (min. 50 TOPS), and base frequency of 3.0 GHz with Turbo Boost.

Memory: 16 GB DDR5 RAM (min. 6400 MT/s) with at least one vacant DIMM slot for future expansion.

Storage: 1 TB NVMe PCIe Gen 4.0 x4 SSD (Min. Read 3500 MB/s; Write 2100 MB/s).

Graphics: Integrated Intel Arc (Xe3) or latest UHD Graphics with hardware ray tracing and 4K support.

Display: 21" to 21.5" Full HD (1920x1080) IPS LED-backlit monitor, min. 250 nits brightness, with HDMI and DP/VGA ports.

Peripherals: Wired/Wireless Optical Mouse (min. 1000 DPI) and matching Full-size Multimedia Keyboard.

Chassis & Connectivity: SFF/Mini-Tower with 80 Plus Gold PSU; Integrated Wi-Fi 7, Bluetooth 6.0, and Gigabit Ethernet; I/O ports including USB-C and USB 3.2 Gen 2.

Software: Pre-loaded Windows 11 Pro (64-bit), Microsoft Office (latest version) tool with OEM License.

Includes 1 years comprehensive onsite warranty. make HP, DELL, Lenovo.

Supply, Installation, Testing and Commissioning (SITC) of A4 Monochrome All-in-One Laser Printer comprising of:

Functions: Multi-function (Print, Scan, Copy) with Sheetfed scanner type.

Performance: Minimum print/copy speed of 30 ppm (Black & White).

Paper Handling: Automatic Duplex printing; 2 Nos. Input Trays with a total sheet capacity of 250 sheets; supporting A4 and Envelope media.

Printer Cum Connectivity: Network-ready with integrated Wi-Fi and High-speed USB hardware interface.

Scanner Physical Specs: Heavy-duty build with compact footprint,

Included: Initial Black Ink/Toner cartridge and necessary power/interface cables.

Scope includes physical delivery, installation of drivers/software on designated systems, and demonstration of all functions (Network/Duplex/Scan) to the User.

includes 1 years comprehensive onsite warranty, Make HP,Brother, Canon.

LED Display Panel : Size: 65”

440 nits Brightness, Smart Android OS, 4K UHD Resolution, 24*7, Screen Mirroring through Airplay/Chromecast, Direct LED, 16 Gb storage, Wi-Fi, 178 Degree Viewing

Angle, Landscape/Portrait/Tilt Installation, IP/RS232C Control, 10W+10W Speakers, HDMI 2.1 (4), USB (2), Power Scheduling, 1200:1 Contrast Ratio, Color Gamut (DCI-

P3) 92%, HDMI Auto Wake up. 4K HDR Visual Experience through 4K HDR Processor X1, 4K X-Reality PRO, Triluminos PRO, Motionflow XR, HDR10/HLG/Dolby Vision

Recommended Makes: SONY/LG/Samsung

6.5" Two-way surface speaker, 70/100V transformer with 8 Ω bypasses, 130° conical coverage, includes yoke Mount. Priced individually but must be purchased in pairs.

24 Speakers: Recommended Makes: Crestron/QSC/BOSE 2 30,500 61,000

Supplying, installation, testing and commissioning of Minimum BEE Star Rating: 3 Star, 1.5 Ton capacity high-wall mounted split type inverter air conditioner unit,

suitable for operation on single-phase $230\text{ V} \pm 10\%$, $50\text{ Hz}$ AC power supply, fitted with high-efficiency rotary/scroll hermetically sealed inverter

compressor, eco-friendly green refrigerant (R-32 or R-410A) with zero ODP.

The unit shall comprise of:

Indoor Unit (IDU): High-wall mounted unit fitted with cooling coil, multi-speed low-noise evaporator blower, washable anti-bacterial air filter, motorized auto-louver,

digital display, cordless remote control, and aesthetic ABS plastic casing

Outdoor Unit (ODU): Weather-proof casing housing the inverter compressor, 100% copper condenser coil with anti-corrosion blue/gold fin protection, low-noise axial

fan with motor, and factory-charged refrigerant.

25 Air Conditions 10 46,000 4,60,000

Standard Interconnecting Piping.

Cables & Drain: Interconnecting control/power cabling (3-core/4-core copper cable) and up to 3.0 metres of rigid PVC condensate drain pipe.

Compressor Type: Variable speed Inverter (BLDC)

Accessories: Suitable heavy-duty MS/GI powder-coated outdoor unit mounting bracket/stand, expansion anchor fasteners, wall sleeve, and rubber anti-vibration pads.

Complete with testing, leak testing with dry nitrogen, evacuation, gas charging, testing, balancing, and commissioning as per CPWD General Specifications for HVAC

Supplying, installation, testing and commissioning of 2.0 Ton (2.0 TR) capacity high-wall mounted split type inverter air conditioner unit, suitable for operation on single-

phase 230 V+/_ 10%, 50 Hz AC power supply, fitted with high-efficiency twin-rotary/scroll hermetically sealed inverter compressor, eco-friendly green refrigerant (R-32

or R-410A) with zero ODP.

The unit shall comprise of:

Indoor Unit (IDU): High-wall mounted unit fitted with cooling coil, multi-speed low-noise evaporator blower, washable anti-bacterial air filter, motorized auto-louver,

digital display, cordless remote control, and aesthetic ABS plastic casing

Outdoor Unit (ODU): Weather-proof casing housing the inverter compressor, 100% copper condenser coil with anti-corrosion blue/gold fin protection, low-noise axial

26 Air Conditions fan with motor, and factory-charged refrigerant. 3 55,000 1,65,000

Standard Interconnecting Piping.

Cables & Drain: Interconnecting control/power cabling (3-core/4-core copper cable) and up to 3.0 metres of rigid PVC condensate drain pipe.

Compressor Type: Variable speed Inverter (BLDC)

Accessories: Suitable heavy-duty MS/GI powder-coated outdoor unit mounting bracket/stand, expansion anchor fasteners, wall sleeve, and rubber anti-vibration pads.

Complete with testing, leak testing with dry nitrogen, evacuation, gas charging, testing, balancing, and commissioning as per CPWD General Specifications for HVAC

Total 41,36,594

Digitally signed by PRIYA