Supply and installation of Solar Mini Mast at various locations in Devikulam Block Panchayat

Amount

SUPPLY AND INSTALLATION OF SOLAR MINIMAST LIGHTING SYSTEM AT VARIOUS LOCATIONS IN DEVIKULAM BLOCK PANCHAYAT

Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 90mm top diameter, 200mm bottom diameter thickness 3mm base plate dimensions of 310x310x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4 nos solar powered luminaries in symmetrical arrangement including connector foundation bolt 4 nos M24 x 750 mm length, 310 mm PCD manufactured from special steel along with nuts, washers, anchor plate and common template existing RCC foundation and junction box etc, complete 8 Meters

All in One Solar street light with 60W, System efficacy of not less than 150Lumen, Life of LED Not less than 50000 burning hours LED Chip make:Cree/Lumilled/Nichea/Osram, with CRI Min 70, THD less 10% in high pressure die cast aluminum/standard alloy with power consumption not more than 110% of rated capacity of LED Light, with dimmining option, Color Temperature 6000K Το 6500K. Mono Crystalline Silicon Solar Cell IEC 61215, IEC 61730, IEC 61701/ equivalent BIS, with capacity of 12V, (75W & plusmn; 7W (MONO) Wp. Solar Cell Efficiency 12%. Lithium Lion (Li-Ion) Battery with capacity 11.1 V,42 Ah , minimum 2 day autonomy - shall be long life maintenance free with replaceable construction and inbuilt protection from Deep Discharge BIS Certified-IS 16046: 2015, IS 16047: 2012. highly efficient micro controller based integrated MPPT Charge controller and Driver with efficiency min 90%, IP65, IK 08, Operating temperature o +55°C, Operating Humidity up to 95%. The Luminaire shall be compatible for Hybrid system (both solar powered and commercial powered at 240V, 50Hz AC Supply). External cover shall be UV Stabilized Poly Carbonate cover with Fixed mounting arrangement or as per requirement with LM 79, LM80, BIS certifications. Manufactures Name/Logo engraved/ Embossed on Housing/ Body or name/Logoon aluminum plate/Labels or Name/Logo printed on housing/Body shall be labelled. Minimum 3 years warranty from actual date of completion of work or asset handover to beneficiary department whichever is later on complete luminaire including driver/ Controller gear, LED battery, all accessories, etc complete so as to keep the solar lighting system in working conditions

Supply and fixing of Syntex Box (for fixing KSEB Meter) made out of Sheet Moulding Compound Surface mounted or recess-in wall (Indoor/Outdoor Use) One piece moulded SMC base and SMC door with internal hinges. Knockout for wire entry, earthing bolt. Includes Contactor, ELCB, Connector, HRC Fuse, wiring cables for inter connection

Earthing with G.I. earth pipe in ordinary soil as per IS: 3043 with 1 metre long, 40 mm dia B Class GI Pipe fitted with GI Funnel with weld mesh at top including digging pit having dimension 0.45 x 0.45 x 1 metre backfilling the pit with alternate layer of charcoal, earth enhancing compound and sand from the bottom as required. including brick work masonary enclosure at the top (300 x 300 x 300 mm inside) with cover plate having locking arrangement but excluding earth continuity conductor, test joint and covering at the top

Supply and fixing of Name Plate (minimum size 12" x 6") on the pole (1.5m above ground) with Name of Project, Year of Project, Name of supplier, Phone number of service personnel, Date of Installation & Name of Implementing agency

PHOENIX ENERGY SYSTEMS

R.G.ELECTRONICS

S K ELECTRICALS

Bidder Name

R.G.ELECTRONICS

S K ELECTRICALS

J N LIGHTINGS (KERALA)

PHOENIX ENERGY SYSTEMS