Tender for work of laying, testing and commissioning of 11/22 KV underground & Overhead XLPE cable under various scheme At Kadodara Ind Sub division ( Tantithaiya SS ) under jurisdiction of Kadodara Division of Surat Rural Circle.

Tender for work of laying, testing and commissioning of 11/22 KV underground & Overhead XLPE cable under various scheme At Kadodara Ind Sub

division ( Tantithaiya SS ) under jurisdiction of Kadodara Division of Surat Rural Circle.

Sr. No. Item Code Item Unit Rate for

Labour charge for excavation of cable trench of 400mm width x 1200mm depth, in any

140 9925000001 type of soil for laying of cable of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length is to be considered)

Labour charge for excavation of cable trench of 600mm width x 1200mm depth, in any

141 9925000002 type of soil for laying of cable of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length is to be considered)

Labour charge for excavation of cable trench of 400mm width x 1500mm depth, in any

142 9925000003 type of soil for laying of cable of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length is to be considered)

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 mm2 & preparation

of sand layer 100mm thick, in the cable trench & covering the cable with 150 mm dia

(Inner), thickness 25 mm, 1.0 meter long RCC half round muffs and providing and fixing

143 9925000004 of 4inch width yellow colour polyethylene tape with printing "CAUTION ELECTRIC CABLE Meter

BELOW" at 0.75 m depth from ground surface after laying cable in trench. This will provide

indication that electric cable is passing underground so as to protect cable from mechnical

injuries, refilling the same, as per Instruction of Engineer in Charge (EIC).

Labour charge for horizontal drilling using Auger machine without damage to surface

road at max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-4,Green color, 110mm O.D.

8.5mm thickness H.D.P.E. pipe confirms to IS 4984- 1987(3rd revision) and BIS

certification and laying of 11KV/22KV XLPE cable of size up to 240 mm2 in HDPE pipe, as

144 9925000005 per Site Condition (excluding cost of pipe). The detail map obtained from HDD machine Meter

and excell sheet(hard and soft copy) indicating the respective depth and distance from

adjacent landmark for each segment for HDD is must required to be submitted. HDD to be

carried out at depth 1.5 mtrs to 2.0 mtrs as per site conditions and as per instruction of

Labour charge for horizontal drilling manually without damage to surface road at max

2.0 mtrs depth & putting of 6.11 kg/cm2 , class-4,Green color, 110mm

O.D. , 8.5mm thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd revision) and BIS

certification and laying of 11KV/22KV XLPE cable of size up to 240 mm2 size, as per Site

Condition (excluding cost of pipe). The detail map and excell sheet(hard and soft copy)

indicating the respective depth and distance from adjacent landmark for each segment of

cable to be submitted. Drilling to be carried out at depth Minimum 1.2 mtrs to 2.0 mtrs as

per site conditions as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5 mm thickness

146 9925000007 H.D.P.E. pipe confirms to IS 4984 and BIS certification for laying of underground 11KV / Meter

22KV XLPE cable up to 240 mm2 size.

Labour work for RCC concreting on disputed location and repairing of damage portion of

147 9925000008 road crossing for the work carried out for roads crossing as well as concreting & muffing CMT

of ploes including all materials (1:2:4)

Providing & fixing concrete stone route marker of 300 mm width x 150 mm thick x

mm height embedded in earth at least 300 mm below & 350 mm above ground level

respectively at distance approx 50 meters along the length of cable. The RCC concreting

(1:2:4)(all necessary maeterials will be in bidder's scope) of route marker is to be carried

out 300 mm width x 150 mm thick x 300 mm below ground level as per instruction of

EIC. The route marker should be with name of company with approved yellow colour-

DGVCL. The distance from marker to cable and cable depth with feeder name etc., marked

with arrow sign is to be painted on it.The route marker is to be fixed at location near to any

fixed permanent location (not necessary to fix exact on top of cable) as per instruction of

Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ pole with cable

connection arrangement along with fitting of necessary fabrication for 11KV cable including

excavation of pit & refilling of earth as per instruction of EIC. (Exclusive of concreting &

muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ pole with cable connection

arrangement along with fitting ofnecessary fabrication for 11KV/22 KV cable including

excavation of pit & refilling of earth as per instruction of EIC. (Exclusive of concreting &

muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC pole with cable connection

arrangement along with fitting of necessary fabrication for 11KV cable including excavation

of pit & refilling of earth as per instruction of EIC. (Exclusive of concreting & muffing of

Erection of Single pole structure using 8.0 Mtr PSC pole with cable connection

arrangement along with fitting ofnecessary fabrication for 11KV/22 KV cable including

excavation of pit & refilling of earth as per instruction of EIC. (Exclusive of concreting &

muffing of poles)

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to 240 mm2 on DP

153 9925000014 Structure with fixing of 02 Nos polymer cleats on top and middle part.Polymer cleats, Per Job

nut bolts etc. fixing material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm thickness

H.D.P.E. pipe confirms to IS 4984 and BIS certification on the erected DP structure

for the mechanical protection of cable by inserting the cable inside HDPE pipe. The HDPE

pipe shall be erected in such a way that 300mm shall be below the ground level and the

rest 2700 mm shall be supported on the DP Structure with 01 No Polymer cleat.All

materials including polymer cleat and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe with pit to be

filled with salt & coke and construction of chamber as per DGVCL Drg. No. dg /100 for DP

and cable. The earthing pit should be joined with cable by G.I. strip of size 1” width &

mm thick. All material GI pipe, Coke, Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for upto 11kV 3C x

185 mm2 size XLPE cable as per DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations (outdoor) for upto 22 kV

3C x 185 mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat shrink type end terminations (indoor) for upto 11kV 3C x

mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat & shrinkable end terminations (indoor) for upto 22 kV

3C x 185 mm2 size XLPE cable as per DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint for upto 11kV 3C x

185 mm2 size XLPE cableas per DGVCL technical specification.

Supply & fixing of heat shrinkable straight through joint type for upto 22kV 3C x

mm2 size XLPE cable as per DGVCL technical specification

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 mm deep joint pits

for installation of 11kV / 22kV Straight through joints as per instruction of engineer-in-

charge & covering the cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter long

RCC half round muffs & refilling same as per instruction of EIC .

Providing and fixing of insulating bus bar, made from 11KV/22KV XLPE cable after

removal of semi conducting layer and applying of PVC heat shrinkable anti- tracking core

insulating tubing (1.1KV), on both end terminal using Aluminium long barrel heavy duty up

163 9925000024 to 240 sq mm lugs, Aluminium bus connector. Taping with PG- clamp for bus conductor as No.

per drawing and as per instruction of EIC. The Alluminium lugs and PG clamp shall be

covered with 11KV/22KV HT insulating tapes.(11KV/22KV XLPE cable will be in scope of

DGVCL while all other materials will be in bidder's scope)

Testing of cable at various points and commissioning the feeder as per instruction of

engineer-in-charge.Test result shall be submitted by contractor with bill.

Preparation and submission of 6 (six) copies, of complete layout drawings with

GIS mapping as per actual cable routing showing road crossing, HDPE pipe sleeving, Set

jointing locations, markers etc.

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W) from 3 mm aluminium

sheet along with 1.0 mm dia aluminium binding wire for fixing of aluminium tag near end

166 9925000029 termination joint at DP structure for identifyng the cable. The details of feeder i.e. 11 / 22 No.

KV with feeder name shound be punched on the tag by letter punch of size 16 mm as per

instruction of In-charge Engineer.

Supply & fixing of heat shrink type end terminations (outdoor) for 11kV 3C x 240 mm2

size XLPE cable as per DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations (outdoor) for 22 kV 3C x

mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat shrink type end terminations (indoor) for 11kV 3C x 240 mm2

size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat & shrinkable end terminations (indoor) for 22 kV 3C x 240 mm2

size XLPE cable as per DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint for 11kV 3C x 240 mm2 size

XLPE cableas per DGVCL technical specification.

Supply & fixing of heat shrinkable straight through joint type for 22kV 3C x 240 mm2

size XLPE cable as per DGVCL technical specification

173 9925000047 Laying of any size of 11/ 22 KV XLPE /PILC Cable in redaymade trench or in open space Cable

174 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

175 9925000064 Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC half round pipe No.

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS,

CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC.

COMPLETE AND PAINTING OF FABRICATED MATERIALS AND NUMBERING

COMPLETE WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION OF PIT

AND REFILLING OF EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE AND

3 9926000003 PAINTING OF STEEL POLE, FABRICATED MATERIALS USED ON THE POLEAND No.

NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY CROSSING ON

BG/MG/NG LINE FOR 0.400/11/22KV OVERHEAD LINES I.E INCLUDING EXCAVATION

OF PIT & REFILLING OF EARTH, FIXING CROSS ARMS, TOP FITTING CLAMPS,ANTI-

CLIMBING DEVICES DANGER BOARD, INSULATORS ETC. COMPLETE AND

PAINTING OF STEEL POLES, FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COSTOF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSC POLES

INCLUDING EXCAVATION OF PITS & REFILLING OF EARTHING, FIXING OF

CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER

BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS.STEEL POLE

INCLUDING EXCAVATION OF PITS & REFILLING OFEARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES, CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARDS,

INSULATORS ETC.COMPLETE & PAINTING OF POLES,FABRICATED

MATERIALSUSED ON THE POLES AND NUMBERING WITH COST OF PAINTSAS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH, HG

FUSES OF 8 MTRS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH,FIXING OF CHANNELS SUPPORTING ANGLES, CLAMPS,

ANTI- CLIMBING DEVICES, DANGER BOARDS, INSULATORS,DOFUSES ETC.

COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COSTOF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDINGOF ERECTION OF GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,HG

FUSES, 9 TO 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, FIXING OFCHANNEL, SUPPORTING ANGLES, CLAMPS, ANTI-

CLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC. COMPLETE AND

PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH, HG

FUSES, TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF

METER,200KG PSC POLE METERS POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE,

FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS,

9 9926000009 ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING No.

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USEDON THE POLES

AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,HG

FUSES TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX 9 TO

METERS STEEL POLES INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH

CARTING OF TRANSFORMERS FROM STORE TO SITE, FIXINGOF CHANNELS

SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS, ANTICLIMBING

10 9926000010 DEVICES, DANGER BOARDS,CONDUCTOR AND CABLE WIRING ETC. COMPLETE No.

AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTIONS OF

GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH

AS PER STANDARD SPECIFICATION WITH STAY CLAMPS, STAY WIRE, ANCHOR

ROD, TURN BUCKLE, EYEBOLT, GUY INSULATOR, CEMENT CONCRETE BLOCK

ETC. BUT EXCLUDING CONCRETING.

9926000012 CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CEMENT SAND METAL CMT

(1:2:4) AND WATER ETC. AS PER STANDARD SPECIFICATION.(cement Should be

grade) used for Concreting.

9926000013 ERECTION OF COIL TYPE EARTHING INCLUDING COST OF COAL,SALT ETC. BUT No.

13 WITHOUT COST OF GI WIRE AS PER STANDARD SPECIFICATION(20kg solt+20kg

9926000014 ERECTION OF GI PIPE/CI PLATE TYPE EARTHING INCLUDINGCOST OF COAL SALT No.

ETC. BUT WITHOUT COST OF PIPE/GIPLATE GI WIRE AS PER STANDARD

SPECIFICATION.(20kg solt+20kg coal)

9926000015 ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS, BRASS NIPPLE, No.

BRASS HOLDER TECK WOOD BUSH,REFLECTORS FUSE, WIRING ETC. AS PER

STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

9926000016 STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA CONDUCTOR for ALL TYPE OF ONE

CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING COND

FIXING OF INSULATORS, BINDING JUMPERING ETC. PER

17 9926000017 STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING ETC. DO

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5/4MM2 TWIN

CORE CABLE FROM TERMINAL POLE TO METERING POINT INCLUDING FIXING OF

18 9926000018 METER WITH METER EARTHING COMPLETE WORK AS PER STANDARD No.

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH PVC

4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL POLE TO METERING POINT

19 9926000019 INCLUDING FIXING OF METER WITH METER EARTHING COMPLETE WORK AS PER No.

STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

9926000020 ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA FOR No.

ERECTION OF POLE/ GUY ETC. AS PER STANDARD SPECIFICATION OVER &

20 ABOVE NORMAL COST COVERED AGAINST EXCAVATION OF PIT UNDER NORMAL

SOIL FOR ERECTION OF POLE,GUY, DOUBLE POLE STRUCTURE EARTHING WITH

THE APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

9926000025 Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING,HT LINE No.

CROSSING AND TELEPHONE LINE CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG FUSES,TRANSFORMERS,

LIGHTENING ARRESTOR, DISTRIBUTION BOX. ON 8 METERS 200 KGAND PSC

POLE INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING

ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER

BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY

SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH , HG

FUSES,TRANSFORMERS, LIGHTENINGARRESTOR, DISTRIBUTION BOX. ON

9 to 11 METERS RSJ POLE INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF

CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS,

27 9926000027 ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING No.

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE

AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OFGUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG PSC POLES

INCLUDING EXCAVATION OF PITS & REFILLING OF EARTHING, FIXING OF

CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER

BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

9926000030 STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR 11/22KV & LT ONE

LINES INCLUDING FIXING OFINSULATORS, BINDING JUMPERING ETC. COND

9926000031 STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES INCLUDING FIXING ONE

OF INSULATORS, BINDING JUMPERING ETC. COND

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH,

HG FUSES, TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX.

OF 10 METERS 270 KGAND PSC POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE,

FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS,

32 9926000032 ANTI-CLIMBING DEVICES,DANGER BOARDS, CONDUCTOR AND CABLE WIRING No.

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

9926000033 DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION AT No.

33 STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

9926000034 DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF FABRICATION AT No.

34 STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITH

TRANSFORMER) WITH CREDITING OF FABRICATION & TRANSFORMER AT STORE

& STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITHOUT

TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE & STACKING OF

POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE

37 9926000037 AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY KM

INSULATED PIERCEING CONNECTORS THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION

CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF

38 9926000038 MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH KM

CABLE BY INSULATED PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

39 9926000039 CROSS ARM, BINDING TO PIN INSULATOR,PREPARING SHACKLE POINT,JUMPERS KM

ETC. AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

40 9926000040 CROSS ARM, BINDING TO PIN INSULATOR,PREPARING SHACKLE POINT,JUMPERS KM

ETC. AS REQUIRED AND DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION

CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF

41 9926000041 MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH KM

CABLE BY INSULATED PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN

9926000042 DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE OLD MATERIAL No.

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC

POLE(WITHOUT TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE

AND STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC POLE(WITH

TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE AND STACKING

OF POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

9926000045 DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND CREDITING FITTING KM

45 OF ALL ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND CREDITING

46 9926000046 FITTING OF ALL ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE KM

9926000047 DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND CREDITING FITTING KM

OF ALL ACESSARIES TO DEPARTMENTAL STORE.

9926000048 DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM AND KM

48 CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

9926000049 DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM AND KM

49 CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

9926000050 RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR ONE

11/22KV & LT LINES INCLUDING FIXING OF INSULATORS, BINDING JUMPERINGCOND

9926000051 RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING , ONE

BINDING JUMPERING ETC. COND

9926000052 LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER. (METER WILL BE No.

PROVIDED BY DGVCL)

9926000053 LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND OLD METER No.

53 SHOULD BE CREDITED TO SDN STORE. (METER WILL BE PROVIDED BY DGVCL)

9926000054 LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER CONNECTION. (CT PER

COIL WILL BE PROVIDED BY DGVCL) CT

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR METER

55 9926000055 CONNECTION AND OLD CT SHOULD BE CREDITED TO SDN STORE. (CT COIL

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB WILL BE

PROVIDED BY DGVCL)

9926000057 LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX. (METER WILL BE No.

PROVIDED BY DGVCL)

9926000058 PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER CABLE 3.5 METER No.

(CABLE TO BE PROVIDED BY AGENCY)

9926000059 LABOUR CHARGE FOR PROVIDING/RECONNECTION OF TERMINAL CONNECTION PER

WITH PROPER SIZE OF LUGS. (LUGS COST IS BORNE BY AGENCY) TERMI

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY

OF DEFECT IF ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN

PRO- FORMA REPORT SHOULD BE SUBMITTED TO SDN OFFICE.(* ONLY IF ALL PER

PARAMETER OF VOLTAGE, CURRENT & LOAD AS SHOWN IN PER-FORMA IS DTR

FILLED) AS PER THE INSTRUCTION OF ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY

OF DEFECT IF ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN

61 9926000061 PRO- FORMA REPORT SHOULD BE SUBMITTED TO SDN OFFICE. (DULY FILL PER-

FORMA IN FAULT CONDITION IN WHICH READING PARAMETER IS NOT SHOWN IN

9926000062 INSTALLATION OF DTR METER INCLUDING METER BOX, PROVIDING & FIXING OF No.

1.5SQ MM SINGLE STRAND 10 CORE ARMOURED COPPER CABLE (3.5METER),

TERMINATION IN METER & COIL ETC.(METER, METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

9926000063 INSTALLATION OF DTR METER INCLUDING METER BOX, TERMINATION IN METER No.

63 & COIL ETC. (WITHOUT 10CORE COPPER CABLE) (METER, METER BOX, C.T./P.T.

COIL WILL BE PROVIDED BY DGVCL)

Binding of messanger Conductorat with a distance not more than 0.75 mtr with 6 turns minimum

on XLPE Cable with single strand binding wire (including cost of binding wire)

Supply and Installation of 11/22 kV Distribution Transformers HT Terminal protector (UV

64 9926000086 Resistance) with using 95/120/150 sq.mm long barrel aluminum lug. (1Set = 3 Nos i.e. on

Supply & Installation of HT EPR Tap on 11/22 kV Distribution Transformer with

replacement of bare conductor by HT ABC conductor (DO bottom side to transformer) after PER

removal of semi conductor by HT ABC (6 inch both side). HT ABC to be supplied by SET

DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule,

Pipe-In- Cage (Pic) Type, Earth Electrodes for HT Feeder Pole Having 2000 mm Electrode

Length as per the Tender Specifications and Drawing. (All Materials Will Be Supplied By

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule,

Pipe-In- Cage (Pic) Type, Earth Electrodes for HT Feeder Pole Having 3000 mm Electrode

Length as per the Tender Specifications And Drawing. (All Materials Will Be Supplied By

Supply and Installation of 25 X 3 mm GI Strip having hot dip- galvanized-zinc coating of 80-

100 microns without any joints or welding. Both the end of the GI strip should be connected

with GI nut bolts and required fabrication work for giving separate earthing connections to

(1) Neutral of the transformer

68 9926000090 (2) MS structures of the transformer center (Approximately 25 meter GI strip per Meter

transformer centre

- as per requirement and instruction of Engineer in- charge) (All Materials will be

supplied by Agency)

Supply and Installation of uPVC standard make Pipe of 1.25" diameter for covering GI strip

with UV protected Cable Ties of 550 X 7.6 mm size to bind with pole face(Approximately

meter uPVC pipe for GI strip covering per transformer centre -as per requirement and

instruction of Engineer in-charge.

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out

70 9926000093 fuse to Transformer H.T. including Busbar (12 mm sleev) as per technical specification. Meter

(All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out

71 9926000094 fuse to Transformer H.T. including Busbar(15 mm sleev) as per technical specification. (All Meter

Materials will be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-flammable) material with Weather

resistant, Non-conductive bird guard OD=300 MM, ID=33 MM, Width =1.25 MM, one side

cut from ID to OD. (All Materials will be supplied by Agency)

9926000096 Providing and fixing of LT Terminal protectors i.e. Re-useable boot (LT Side 1.1 kV) No

73 including LT (1.1 kV) insulating taps. All live part at LT side shall be covered with fixing of

LT insulating taps.

9926000097 Nylon Net (12 * 15 ft) Per Net

9926000098 Nylon Dori Per TC

9926000099 Labour charge for fitting Nylon Net (All fabricated material for fitting nylon net shall be Per TC

provided by DGVCL)

Total Tender Estimated Amount-

Rupees TwentyFive Lakh Only (Excluding. Gst)

Executive Engineer (O&M),

DGVCL Kadodara Division.